From: Haci Burak <haci.burak@aurea.com>
To: users@dpdk.org
Subject: [dpdk-users] Link Status Down on Cisco C220 M3 Enic Driver
Date: Tue, 16 Jan 2018 22:29:22 +0300 [thread overview]
Message-ID: <CAN3soGd3N0vyMMOHZJ9KcTkwCt7N9XXV+==OXdA3YhJFAdWHMg@mail.gmail.com> (raw)
Hello ,
I am new to DPDK and I have this problem with the link status. But when i
see it with CIMC their status is up and actually both interface is
connected to each other with cable.
I have followed the instructions and here my logs and outputs is below. If
there any other logs or stats i can provide , i would gladly do that. I am
trying to run on host machine installation. (No VM )
padmin@ubuntu-host:~$
> *uname -a*Linux ubuntu-host 4.4.0-31-generic #50~14.04.1-Ubuntu SMP Wed
> Jul 13 01:07:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
> padmin@ubuntu-host:~/dpdk-stable-16.11.4/examples/ethtool/ethtool-app/ethtool/ethtool-app/x86_64-native-linuxapp-gcc/app$
>
> *lspci | grep Cisco | grep Ethernet*08:00.0 Ethernet controller: Cisco
> Systems Inc VIC Ethernet NIC (rev a2)
> 09:00.0 Ethernet controller: Cisco Systems Inc VIC Ethernet NIC (rev a2)
I am using version 16.11 which is used for Warp17 which the app I planning
to use . Here the output log of the when i run the example *ethtool*.
padmin@ubuntu-host:~/dpdk-stable-16.11.4/examples/ethtool/ethtool-app/ethtool/ethtool-app/x86_64-native-linuxapp-gcc/app$
> sudo ./ethtool -l 0-4 -n 4
> EAL: Detected 32 lcore(s)
> EAL: Probing VFIO support...
> EAL: PCI device 0000:01:00.0 on NUMA socket 0
> EAL: probe driver: 8086:1521 net_e1000_igb
> EAL: PCI device 0000:01:00.1 on NUMA socket 0
> EAL: probe driver: 8086:1521 net_e1000_igb
> EAL: PCI device 0000:08:00.0 on NUMA socket 0
> EAL: probe driver: 1137:43 net_enic
> PMD: rte_enic_pmd: Advanced Filters not available
> PMD: rte_enic_pmd: vNIC MAC addr 54:a2:74:cc:94:90 wq/rq 4096/4096 mtu
> 1500, max mtu:9004
> PMD: rte_enic_pmd: vNIC csum tx/rx yes/yes rss yes intr mode any type min
> timer 125 usec loopback tag 0x0000
> PMD: rte_enic_pmd: vNIC resources avail: wq 128 rq 256 cq 256 intr 1
> EAL: PCI device 0000:09:00.0 on NUMA socket 0
> EAL: probe driver: 1137:43 net_enic
> PMD: rte_enic_pmd: Advanced Filters not available
> PMD: rte_enic_pmd: vNIC MAC addr 54:a2:74:cc:94:91 wq/rq 4096/4096 mtu
> 1500, max mtu:9004
> PMD: rte_enic_pmd: vNIC csum tx/rx yes/yes rss yes intr mode any type min
> timer 125 usec loopback tag 0x0000
> PMD: rte_enic_pmd: vNIC resources avail: wq 128 rq 256 cq 256 intr 1
> Number of NICs: 2
> Init port 0..
> PMD: rte_enic_pmd: Scatter rx mode disabled
> PMD: rte_enic_pmd: Rq 0 Scatter rx mode not being used
> PMD: rte_enic_pmd: Using 128 rx descriptors (sop 128, data 0)
> PMD: rte_enic_pmd: TX Queues - effective number of descs:256
> PMD: rte_enic_pmd: vNIC resources used: wq 1 rq 2 cq 2 intr 0
> PMD: rte_enic_pmd: RQ[0] error_status 4
> Init port 1..
> PMD: rte_enic_pmd: Scatter rx mode disabled
> PMD: rte_enic_pmd: Rq 0 Scatter rx mode not being used
> PMD: rte_enic_pmd: Using 128 rx descriptors (sop 128, data 0)
> PMD: rte_enic_pmd: TX Queues - effective number of descs:256
> PMD: rte_enic_pmd: vNIC resources used: wq 1 rq 2 cq 2 intr 0
> PMD: rte_enic_pmd: RQ[0] error_status 4
> EthApp> quit
*My NIC status:*
Network devices using DPDK-compatible driver
> ============================================
> 0000:08:00.0 'VIC Ethernet NIC' drv=igb_uio unused=
> 0000:09:00.0 'VIC Ethernet NIC' drv=igb_uio unused=
> Network devices using kernel driver
> ===================================
> 0000:01:00.0 'I350 Gigabit Network Connection' if=eth2 drv=igb
> unused=igb_uio *Active*
> 0000:01:00.1 'I350 Gigabit Network Connection' if=eth3 drv=igb
> unused=igb_uio
> Other network devices
> =====================
> <none>
> Crypto devices using DPDK-compatible driver
> ===========================================
> <none>
> Crypto devices using kernel driver
> ==================================
> <none>
> Other crypto devices
> ====================
> <none>
Memory
AnonHugePages: 26624 kB
> HugePages_Total: 32
> HugePages_Free: 32
> HugePages_Rsvd: 0
> HugePages_Surp: 0
> Hugepagesize: 1048576 kB
Thanks in advance....
--
*Haci Burak Karamik*
Software Architect
Mobile: 0905397368221 <00905397368221>
Skype: bkaramik
[image: Aurea]
<http://www.aurea.com/?utm_source=email-signature&utm_medium=email>
reply other threads:[~2018-01-16 19:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAN3soGd3N0vyMMOHZJ9KcTkwCt7N9XXV+==OXdA3YhJFAdWHMg@mail.gmail.com' \
--to=haci.burak@aurea.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).