From: Javier Blazquez <jblazquez@riotgames.com>
To: users@dpdk.org
Subject: [dpdk-users] RSS not working on Mellanox ConnectX-3 NIC
Date: Wed, 8 Jun 2016 21:10:08 -0700 [thread overview]
Message-ID: <CAND4PZzxgF3aF_DY+ULk4_7OVYvtOLhX7EE6HFTG6dejjuisqw@mail.gmail.com> (raw)
Hi,
I have a pair of Mellanox MCX354A-FCBT NICs and I'm having trouble scaling
up RX performance. It appears that RSS is not working and RX speed is
limited by a single queue.
According to the documentation[1] RSS is supported on the mlx4 driver, and
debugging the eth dev initialization code I can see the driver setting up
RSS apparently with success. I can generate 34Mpps over the TX port using 8
queues, but I can only ever receive at 20Mpps on the RX end, no matter how
many queues I use.
The generated packets have randomized source/destination IP addresses and
source/destination UDP ports, so they should hash to different RX queues.
The NICs are connected directly to each other with a DAC cable. They are on
different NUMA nodes and I'm placing TX/RX lcores on the appropriate socket
for each NIC. It doesn't matter which NIC I use as the sender, the results
are exactly the same. I have tried both pktgen and my own code but didn't
see any difference.
The server is a 2x 12-core Intel E5-2680 v3 2.5GHz. The Mellanox NICs are
flashed with the latest firmware and I'm using MLNX_OFED 3.3. I'm using the
MLNX_DPDK 2.2 distribution, but I also tried the standard DPDK v16.04 and
the result was the same (with lower TX and RX performance overall).
Here's the output of ibstat:
CA 'mlx4_0'
CA type: MT4099
Number of ports: 2
Firmware version: 2.36.5000
Hardware version: 1
Node GUID: 0x0002c90300310c30
System image GUID: 0x0002c90300310c33
Port 1:
State: Active
Physical state: LinkUp
Rate: 56
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x0c010000
Port GUID: 0x0202c9fffe310c30
Link layer: Ethernet
Port 2:
State: Active
Physical state: LinkUp
Rate: 56
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x0c010000
Port GUID: 0x0202c9fffe310c31
Link layer: Ethernet
CA 'mlx4_1'
CA type: MT4099
Number of ports: 2
Firmware version: 2.36.5000
Hardware version: 1
Node GUID: 0x0002c90300318200
System image GUID: 0x0002c90300318203
Port 1:
State: Active
Physical state: LinkUp
Rate: 56
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x0c010000
Port GUID: 0x0202c9fffe318200
Link layer: Ethernet
Port 2:
State: Active
Physical state: LinkUp
Rate: 56
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x0c010000
Port GUID: 0x0202c9fffe318201
Link layer: Ethernet
Below are the pktgen results. Note that the first NIC is 0000:03:00.0 and
is assigned ports 0-1, and the second NIC is 0000:a1:00.0 and is assigned
ports 2-3. I'm testing TX on port 0 and RX on port 2, which are connected
directly. Random packets are generated by using the pktgen script found at
[2].
$ app/pktgen -c ffffff -n 4 -w 0000:03:00.0 -w 0000:a1:00.0
--socket-mem=1024,1024 -- -N -T -P -m "[0-7].0,[12-19].2
Copyright (c) <2010-2016>, Intel Corporation. All rights reserved. Powered
by Intel® DPDK
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 8 on socket 0
EAL: Detected lcore 7 as core 9 on socket 0
EAL: Detected lcore 8 as core 10 on socket 0
EAL: Detected lcore 9 as core 11 on socket 0
EAL: Detected lcore 10 as core 12 on socket 0
EAL: Detected lcore 11 as core 13 on socket 0
EAL: Detected lcore 12 as core 0 on socket 1
EAL: Detected lcore 13 as core 1 on socket 1
EAL: Detected lcore 14 as core 2 on socket 1
EAL: Detected lcore 15 as core 3 on socket 1
EAL: Detected lcore 16 as core 4 on socket 1
EAL: Detected lcore 17 as core 5 on socket 1
EAL: Detected lcore 18 as core 8 on socket 1
EAL: Detected lcore 19 as core 9 on socket 1
EAL: Detected lcore 20 as core 10 on socket 1
EAL: Detected lcore 21 as core 11 on socket 1
EAL: Detected lcore 22 as core 12 on socket 1
EAL: Detected lcore 23 as core 13 on socket 1
EAL: Detected lcore 24 as core 0 on socket 0
EAL: Detected lcore 25 as core 1 on socket 0
EAL: Detected lcore 26 as core 2 on socket 0
EAL: Detected lcore 27 as core 3 on socket 0
EAL: Detected lcore 28 as core 4 on socket 0
EAL: Detected lcore 29 as core 5 on socket 0
EAL: Detected lcore 30 as core 8 on socket 0
EAL: Detected lcore 31 as core 9 on socket 0
EAL: Detected lcore 32 as core 10 on socket 0
EAL: Detected lcore 33 as core 11 on socket 0
EAL: Detected lcore 34 as core 12 on socket 0
EAL: Detected lcore 35 as core 13 on socket 0
EAL: Detected lcore 36 as core 0 on socket 1
EAL: Detected lcore 37 as core 1 on socket 1
EAL: Detected lcore 38 as core 2 on socket 1
EAL: Detected lcore 39 as core 3 on socket 1
EAL: Detected lcore 40 as core 4 on socket 1
EAL: Detected lcore 41 as core 5 on socket 1
EAL: Detected lcore 42 as core 8 on socket 1
EAL: Detected lcore 43 as core 9 on socket 1
EAL: Detected lcore 44 as core 10 on socket 1
EAL: Detected lcore 45 as core 11 on socket 1
EAL: Detected lcore 46 as core 12 on socket 1
EAL: Detected lcore 47 as core 13 on socket 1
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 48 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x80000000 bytes
EAL: Virtual area found at 0x7f38c0000000 (size = 0x80000000)
EAL: Ask a virtual area of 0x80000000 bytes
EAL: Virtual area found at 0x7f3800000000 (size = 0x80000000)
EAL: Requesting 1 pages of size 1024MB from socket 0
EAL: Requesting 1 pages of size 1024MB from socket 1
EAL: TSC frequency is ~2494222 KHz
EAL: Master lcore 0 is ready (tid=eca398c0;cpuset=[0])
EAL: lcore 6 is ready (tid=e7833700;cpuset=[6])
EAL: lcore 7 is ready (tid=e7032700;cpuset=[7])
EAL: lcore 8 is ready (tid=e6831700;cpuset=[8])
EAL: lcore 4 is ready (tid=e8835700;cpuset=[4])
EAL: lcore 1 is ready (tid=ea038700;cpuset=[1])
EAL: lcore 9 is ready (tid=e6030700;cpuset=[9])
EAL: lcore 3 is ready (tid=e9036700;cpuset=[3])
EAL: lcore 2 is ready (tid=e9837700;cpuset=[2])
EAL: lcore 13 is ready (tid=e402c700;cpuset=[13])
EAL: lcore 10 is ready (tid=e582f700;cpuset=[10])
EAL: lcore 12 is ready (tid=e482d700;cpuset=[12])
EAL: lcore 11 is ready (tid=e502e700;cpuset=[11])
EAL: lcore 5 is ready (tid=e8034700;cpuset=[5])
EAL: lcore 20 is ready (tid=e0825700;cpuset=[20])
EAL: lcore 19 is ready (tid=e1026700;cpuset=[19])
EAL: lcore 18 is ready (tid=e1827700;cpuset=[18])
EAL: lcore 21 is ready (tid=bbfff700;cpuset=[21])
EAL: lcore 22 is ready (tid=bb7fe700;cpuset=[22])
EAL: lcore 14 is ready (tid=e382b700;cpuset=[14])
EAL: lcore 17 is ready (tid=e2028700;cpuset=[17])
EAL: lcore 23 is ready (tid=baffd700;cpuset=[23])
EAL: lcore 15 is ready (tid=e302a700;cpuset=[15])
EAL: lcore 16 is ready (tid=e2829700;cpuset=[16])
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1003 librte_pmd_mlx4
PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_0" (VF:
false)
PMD: librte_pmd_mlx4: 2 port(s) detected
PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:31:0c:30
PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:31:0c:31
EAL: PCI device 0000:a1:00.0 on NUMA socket 1
EAL: probe driver: 15b3:1003 librte_pmd_mlx4
PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_1" (VF:
false)
PMD: librte_pmd_mlx4: 2 port(s) detected
PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:31:82:00
PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:31:82:01
[0-7].0 lcores: RX( 0 1 2 3 4 5 6 7 )TX( 0 1 2 3 4 5 6 7 ) ports:
RX( 0 )TX( 0 )
[12-19].2 lcores: RX( 12 13 14 15 16 17 18 19 )TX( 12 13 14 15 16 17
18 19 ) ports: RX( 2 )TX( 2 )
Copyright (c) <2010-2016>, Intel Corporation. All rights reserved.
Pktgen created by: Keith Wiles -- >>> Powered by Intel® DPDK <<<
Lua 5.3.2 Copyright (C) 1994-2015 Lua.org, PUC-Rio
>>> Packet Burst 32, RX Desc 512, TX Desc 512, mbufs/port 4096, mbuf cache
512
=== port to lcore mapping table (# lcores 24) ===
lcore: 0 1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 22
23
port 0: D: T 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 0: 0 0: 0 0: 0
0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0:
0 = 8: 8
port 2: D: T 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0
0: 0 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 0: 0 0: 0 0: 0 0:
0 = 8: 8
Total : 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 0: 0 0: 0 0: 0
0: 0 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 1: 1 0: 0 0: 0 0: 0 0:
0
Display and Timer on lcore 0, rx:tx counts per port/lcore
Configuring 4 ports, MBUF Size 1920, MBUF Cache Size 512
Lcore:
0, RX-TX
RX( 1): ( 0: 0)
TX( 1): ( 0: 0)
1, RX-TX
RX( 1): ( 0: 1)
TX( 1): ( 0: 1)
2, RX-TX
RX( 1): ( 0: 2)
TX( 1): ( 0: 2)
3, RX-TX
RX( 1): ( 0: 3)
TX( 1): ( 0: 3)
4, RX-TX
RX( 1): ( 0: 4)
TX( 1): ( 0: 4)
5, RX-TX
RX( 1): ( 0: 5)
TX( 1): ( 0: 5)
6, RX-TX
RX( 1): ( 0: 6)
TX( 1): ( 0: 6)
7, RX-TX
RX( 1): ( 0: 7)
TX( 1): ( 0: 7)
12, RX-TX
RX( 1): ( 2: 0)
TX( 1): ( 2: 0)
13, RX-TX
RX( 1): ( 2: 1)
TX( 1): ( 2: 1)
14, RX-TX
RX( 1): ( 2: 2)
TX( 1): ( 2: 2)
15, RX-TX
RX( 1): ( 2: 3)
TX( 1): ( 2: 3)
16, RX-TX
RX( 1): ( 2: 4)
TX( 1): ( 2: 4)
17, RX-TX
RX( 1): ( 2: 5)
TX( 1): ( 2: 5)
18, RX-TX
RX( 1): ( 2: 6)
TX( 1): ( 2: 6)
19, RX-TX
RX( 1): ( 2: 7)
TX( 1): ( 2: 7)
Port :
0, nb_lcores 8, private 0x8f09f0, lcores: 0 1 2 3 4 5 6 7
2, nb_lcores 8, private 0x8f5270, lcores: 12 13 14 15 16 17 18 19
** Dev Info (librte_pmd_mlx4:17) **
max_vfs : 0 min_rx_bufsize : 32 max_rx_pktlen : 65536
max_rx_queues :65408 max_tx_queues:65408
max_mac_addrs : 127 max_hash_mac_addrs: 0 max_vmdq_pools: 0
rx_offload_capa: 0 tx_offload_capa : 0 reta_size : 0
flow_type_rss_offloads:0000000000000000
vmdq_queue_base: 0 vmdq_queue_num : 0 vmdq_pool_base: 0
** RX Conf **
pthreash : 0 hthresh : 0 wthresh : 0
Free Thresh : 0 Drop Enable : 0 Deferred Start : 0
** TX Conf **
pthreash : 0 hthresh : 0 wthresh : 0
Free Thresh : 0 RS Thresh : 0 Deferred Start : 0 TXQ
Flags:00000000
PMD: librte_pmd_mlx4: 0x94b7e0: TX queues number update: 0 -> 8
PMD: librte_pmd_mlx4: 0x94b7e0: RX queues number update: 0 -> 8
Initialize Port 0 -- TxQ 8, RxQ 8, Src MAC 00:02:c9:31:0c:30
Create: Default RX 0:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 0:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 0:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 0:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 0:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 0:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 0:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 0:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default TX 0:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:0 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 0:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:1 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 0:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:2 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 0:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:3 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 0:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:4 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 0:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:5 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 0:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:6 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 0:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 0:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 0:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 0:7 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Port
memory used = 324936 KB
** Dev Info (librte_pmd_mlx4:19) **
max_vfs : 0 min_rx_bufsize : 32 max_rx_pktlen : 65536
max_rx_queues :65408 max_tx_queues:65408
max_mac_addrs : 127 max_hash_mac_addrs: 0 max_vmdq_pools: 0
rx_offload_capa: 0 tx_offload_capa : 0 reta_size : 0
flow_type_rss_offloads:0000000000000000
vmdq_queue_base: 0 vmdq_queue_num : 0 vmdq_pool_base: 0
** RX Conf **
pthreash : 0 hthresh : 0 wthresh : 0
Free Thresh : 0 Drop Enable : 0 Deferred Start : 0
** TX Conf **
pthreash : 0 hthresh : 0 wthresh : 0
Free Thresh : 0 RS Thresh : 0 Deferred Start : 0 TXQ
Flags:00000000
PMD: librte_pmd_mlx4: 0x953870: TX queues number update: 0 -> 8
PMD: librte_pmd_mlx4: 0x953870: RX queues number update: 0 -> 8
Initialize Port 2 -- TxQ 8, RxQ 8, Src MAC 00:02:c9:31:82:00
Create: Default RX 2:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 2:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 2:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 2:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 2:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 2:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 2:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default RX 2:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Default TX 2:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:0 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:0 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 2:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:1 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:1 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 2:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:2 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:2 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 2:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:3 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:3 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 2:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:4 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:4 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 2:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:5 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:5 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 2:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:6 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:6 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Create: Default TX 2:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Range TX 2:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Sequence TX 2:7 - Memory used (MBUFs 4096 x (size 1920 + Hdr
128)) + 1581248 = 9737 KB headroom 128 2176
Create: Special TX 2:7 - Memory used (MBUFs 64 x (size 1920 + Hdr
128)) + 1581248 = 1673 KB headroom 128 2176
Port
memory used = 324936 KB
Total
memory used = 649871 KB
Port 0: Link Up - speed 56000 Mbps - full-duplex <Enable promiscuous mode>
Port 2: Link Up - speed 56000 Mbps - full-duplex <Enable promiscuous mode>
=== Display processing on lcore 0
WARNING: Nothing to do on lcore 8: exiting
WARNING: Nothing to do on lcore 9: exiting
WARNING: Nothing to do on lcore 10: exiting
WARNING: Nothing to do on lcore 11: exiting
WARNING: Nothing to do on lcore 20: exiting
WARNING: Nothing to do on lcore 21: exiting
WARNING: Nothing to do on lcore 22: exiting
WARNING: Nothing to do on lcore 23: exiting
=== RX/TX processing lcore 1 rxcnt 1 txcnt 1 port/qid, 0/1
=== RX/TX processing lcore 2 rxcnt 1 txcnt 1 port/qid, 0/2
=== RX/TX processing lcore 3 rxcnt 1 txcnt 1 port/qid, 0/3
=== RX/TX processing lcore 4 rxcnt 1 txcnt 1 port/qid, 0/4
=== RX/TX processing lcore 5 rxcnt 1 txcnt 1 port/qid, 0/5
=== RX/TX processing lcore 6 rxcnt 1 txcnt 1 port/qid, 0/6
=== RX/TX processing lcore 7 rxcnt 1 txcnt 1 port/qid, 0/7
=== RX/TX processing lcore 12 rxcnt 1 txcnt 1 port/qid, 2/0
=== RX/TX processing lcore 13 rxcnt 1 txcnt 1 port/qid, 2/1
=== RX/TX processing lcore 14 rxcnt 1 txcnt 1 port/qid, 2/2
=== RX/TX processing lcore 15 rxcnt 1 txcnt 1 port/qid, 2/3
=== RX/TX processing lcore 16 rxcnt 1 txcnt 1 port/qid, 2/4
=== RX/TX processing lcore 17 rxcnt 1 txcnt 1 port/qid, 2/5
=== RX/TX processing lcore 18 rxcnt 1 txcnt 1 port/qid, 2/6
=== RX/TX processing lcore 19 rxcnt 1 txcnt 1 port/qid, 2/7
Pktgen > load random.txt
geometry 132x44
mac_from_arp disable
set 0 count 0
set 0 size 64
set 0 rate 100
set 0 burst 32
set 0 sport 1234
set 0 dport 5678
set 0 prime 1
type ipv4 0
range.proto 0 udp
proto udp 0
set ip dst 0 10.1.72.17
set ip src 0 10.1.72.154/24
set mac 0 00:23:e9:64:c0:03
vlanid 0 1
pattern 0 abc
latency 0 disable
mpls 0 disable
mpls_entry 0 0
qinq 0 disable
qinqids 0 0 0
gre 0 disable
gre_eth 0 disable
gre_key 0 0
icmp.echo 0 disable
pcap 0 disable
range 0 enable
process 0 disable
capture 0 disable
rxtap 0 disable
txtap 0 disable
vlan 0 disable
src.mac start 0 00:50:56:86:10:76
src.mac min 0 00:00:00:00:00:00
src.mac max 0 00:00:00:00:00:00
src.mac inc 0 00:00:00:00:00:00
dst.mac start 0 00:23:e9:64:c0:03
dst.mac min 0 00:00:00:00:00:00
dst.mac max 0 00:00:00:00:00:00
dst.mac inc 0 00:00:00:00:00:00
src.ip start 0 10.1.72.154
src.ip min 0 10.1.72.154
src.ip max 0 10.1.72.254
src.ip inc 0 0.0.0.1
dst.ip start 0 10.1.72.17
dst.ip min 0 10.1.72.17
dst.ip max 0 10.1.72.17
dst.ip inc 0 0
src.port start 0 1025
src.port min 0 1025
src.port max 0 65512
src.port inc 0 1
dst.port start 0 0
dst.port min 0 0
dst.port max 0 254
dst.port inc 0 1
vlan.id start 0 1
vlan.id min 0 1
vlan.id max 0 4095
vlan.id inc 0 0
pkt.size start 0 64
pkt.size min 0 64
pkt.size max 0 1518
pkt.size inc 0 0
set 0 seqCnt 0
Pktgen > start 0
Flags:Port : P-----R--------:0
P--------------:2
Link State : <UP-56000-FD>
<UP-56000-FD>----
Pkts/s Max/Rx : 0/0
19839945/19839945
Max/Tx : 34199936/34135552
34199936/34135552
MBits/s Rx/Tx : 0/21846
12697/21846
Broadcast : 0
0
Multicast : 0
0
64 Bytes : 0
78156990
65-127 : 0
0
128-255 : 0
0
256-511 : 0
0
512-1023 : 0
0
1024-1518 : 0
0
Runts/Jumbos : 0/0
0/0
Errors Rx/Tx : 0/0
0/0
Total Rx Pkts : 0
368764259
Tx Pkts : 669245499
0
Rx MBs : 0
236009
Tx MBs : 428317
0
ARP/ICMP Pkts : 0/0
0/0
:
Pattern Type : abcd...
abcd...
Tx Count/% Rate : Forever / 100% Forever /
100%
PktSize/Tx Burst: 64 / 32 64 /
32
Src/Dest Port : 1234 / 5678 1234 /
5678
Pkt Type:VLAN ID: IPv4 / UDP:0001 IPv4 /
TCP:0001
Dst IP Address : 10.1.72.17
192.168.3.1
Src IP Address : 10.1.72.154/24
192.168.2.1/24
Dst MAC Address : 00:23:e9:64:c0:03
00:00:00:00:00:00
Src MAC Address 00:02:c9:31:0c:30
00:02:c9:31:82:00
[1] http://dpdk.org/doc/guides/nics/mlx4.html
[2] http://dpdk.org/ml/archives/users/2016-April/000489.html
next reply other threads:[~2016-06-09 4:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-09 4:10 Javier Blazquez [this message]
2016-06-14 16:15 ` Olga Shern
2016-06-14 18:11 ` Javier Blazquez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAND4PZzxgF3aF_DY+ULk4_7OVYvtOLhX7EE6HFTG6dejjuisqw@mail.gmail.com \
--to=jblazquez@riotgames.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).