[dpdk-users] BraodCom BNXT driver - Sample program crash DPDK - 18.11

[dpdk-users] BraodCom BNXT driver - Sample program crash DPDK - 18.11

[vikram T]

Hi,
I am trying to run the sample program "hello_world" using the DPDK - 18.11
version on Braodcom BNXT driver the crash is seen:

[root@localhost build]# ./helloworld
EAL: Detected 48 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1533 net_e1000_igb
EAL: PCI device 0000:18:00.0 on NUMA socket 0
EAL:   probe driver: 14e4:16d9 net_bnxt
bnxt_dev_init(): Broadcom NetXtreme driver bnxt

bnxt_hwrm_ver_get(): 1.8.3:20.8.156
bnxt_hwrm_ver_get(): Driver HWRM version: 1.9.2
__bnxt_hwrm_func_qcaps(): PTP SUPPORTED
bnxt_hwrm_func_resc_qcaps(): error 65535:0:00000000:0000
bnxt_dev_init(): hwrm query capability failure rc: ffffffea
Segmentation fault

The same crash is also seen on DPDK-19.05 version.
However with DPDK-17.05 version the sample program runs perfectly fine.

Below is the output of dpdk-devbind.py -s


Network devices using DPDK-compatible driver
============================================
0000:18:00.0 'BCM57417 NetXtreme-E 10GBASE-T RDMA Ethernet Controller 16d9'
drv=igb_uio unused=

Network devices using kernel driver
===================================
0000:02:00.0 'I210 Gigabit Network Connection 1533' if=eno1 drv=igb
unused=igb_uio *Active*
0000:18:00.1 'BCM57417 NetXtreme-E 10GBASE-T RDMA Ethernet Controller 16d9'
if=eno3d1 drv=bnxt_en unused=igb_uio
0000:3b:00.0 'Ethernet Controller X710/X557-AT 10GBASE-T 1589' if=enp59s0f0
drv=i40e unused=igb_uio
0000:3b:00.1 'Ethernet Controller X710/X557-AT 10GBASE-T 1589' if=enp59s0f1
drv=i40e unused=igb_uio
0000:3b:00.2 'Ethernet Controller X710/X557-AT 10GBASE-T 1589' if=enp59s0f2
drv=i40e unused=igb_uio
0000:3b:00.3 'Ethernet Controller X710/X557-AT 10GBASE-T 1589' if=enp59s0f3
drv=i40e unused=igb_uio
0000:af:00.0 'Ethernet Controller XL710 for 40GbE QSFP+ 1583' if=enp175s0f0
drv=i40e unused=igb_uio
0000:af:00.1 'Ethernet Controller XL710 for 40GbE QSFP+ 1583' if=enp175s0f1
drv=i40e unused=igb_uio
0000:af:00.2 'Ethernet Controller XL710 for 40GbE QSFP+ 1583' if=enp175s0f2
drv=i40e unused=igb_uio
0000:af:00.3 'Ethernet Controller XL710 for 40GbE QSFP+ 1583' if=enp175s0f3
drv=i40e unused=igb_uio

Can you help to find the reason for the crash.

Regards
Vikram