From: Stephen Hemminger <stephen@networkplumber.org>
To: "Giridharan, Ganesan" <ggiridharan@rbbn.com>
Cc: users <users@dpdk.org>
Subject: Re: [dpdk-users] Fetching packets from NIC on Hyper-V using patch v9 & Kernel 4.16.11
Date: Tue, 29 May 2018 08:22:40 -0700 [thread overview]
Message-ID: <CAOaVG159h5fPjmZe=L0WSNjY0VFjmOv1UPttGhAdoBTQ9fZTXw@mail.gmail.com> (raw)
In-Reply-To: <CY4PR03MB2757721E2C8C267A72A9F82DCB6D0@CY4PR03MB2757.namprd03.prod.outlook.com>
One possible thing is that Hyperv host filters based on MAC address. What
is the sending application using?
On Tue, May 29, 2018, 3:56 AM Giridharan, Ganesan <ggiridharan@rbbn.com>
wrote:
> Good morning.
>
> Environment:
>
> I am using "testpmd" to verify packets receive/transmit "io" mode on Linux
> guest under Hyper-V on a WS2016 DC server.
> I am using "latest" pulled via git last week early. Applied "v9" patches
> from "Stephen Hemminger".
> Linux guest I am using is Ubuntu 18.04 upgraded to 4.16.11 Kernel.
>
> Problem:
>
> Testpmd does not seem to receive any packets.
>
> Log:
>
> "alias tpmd='./testpmd -l 0-1 --log-level=8 --log-level='\''pmd.net.netvsc.*:debug'\''
> --log-level='\''bus.vmbus:debug'\'' --log-level='\''lib.ethdev.*:debug'\''
> -- -i'"
>
> root@ubuntu-1804-dev:~/v9/dpdk# ./huge-setup.sh eth1 eth2
> Removing currently reserved hugepages
> Unmounting /mnt/huge and removing directory
> Reserving hugepages
> Creating /mnt/huge and mounting as hugetlbfs
> Rebind eth1 to hv_uio_generic
> Rebind eth2 to hv_uio_generic
> root@ubuntu-1804-dev:~/v9/dpdk# cd x86_64-native-linuxapp-gcc/app/
> root@ubuntu-1804-dev:~/v9/dpdk/x86_64-native-linuxapp-gcc/app# tpmd
> EAL: Detected 4 lcore(s)
> EAL: Detected 1 NUMA nodes
> EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> vmbus_scan_one(): Adding vmbus device a759f3db-77bb-4e7c-ac6f-504c268c7f2b
> vmbus_scan_one(): Adding vmbus device fd149e91-82e0-4a7d-afa6-2a4166cbd7c0
> vmbus_scan_one(): Adding vmbus device 58f75a6d-d949-4320-99e1-a2a2576d581c
> vmbus_scan_one(): Adding vmbus device f5bee29c-1741-4aad-a4c2-8fdedb46dcc2
> vmbus_scan_one(): Adding vmbus device 3e7e7e4c-e8cb-4e05-a0aa-a267ced7b73e
> vmbus_scan_one(): Adding vmbus device 1eccfd72-4b41-45ef-b73a-4a6e44c12924
> vmbus_scan_one(): Adding vmbus device d34b2567-b9b6-42b9-8778-0a4ec0b955bf
> vmbus_scan_one(): Adding vmbus device 4487b255-b88c-403f-bb51-d1f69cf17f87
> vmbus_scan_one(): Adding vmbus device 83a43d10-0c74-45ec-a293-31e29ebb1787
> vmbus_scan_one(): Adding vmbus device 242ff919-07db-4180-9c2e-b86cb68c8c55
> vmbus_scan_one(): Adding vmbus device 2dd1ce17-079e-403c-b352-a1921ee207ee
> vmbus_scan_one(): Adding vmbus device 00000000-0000-8899-0000-000000000000
> vmbus_scan_one(): Adding vmbus device 99221fa0-24ad-11e2-be98-001aa01bbf6e
> vmbus_scan_one(): Adding vmbus device 1ac2a997-5040-4851-89e4-3ccd48e51cf9
> vmbus_scan_one(): Adding vmbus device 5620e0c7-8062-4dce-aeb7-520c7ef76171
> vmbus_scan_one(): Adding vmbus device b6650ff7-33bc-4840-8048-e0676786f393
> vmbus_scan_one(): Adding vmbus device 2450ee40-33bf-4fbd-892e-9fb06e9214cf
> vmbus_scan_one(): Adding vmbus device 00000000-0001-8899-0000-000000000000
> EAL: No free hugepages reported in hugepages-1048576kB
> EAL: Probing VFIO support...
> EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
> unreliable clock cycles !
> vmbus_probe_one_driver(): VMBUS device
> 3e7e7e4c-e8cb-4e05-a0aa-a267ced7b73e on NUMA socket -1
> rte_vmbus_map_device(): Not managed by UIO driver, skipped
> vmbus_probe_one_driver(): VMBUS device
> 83a43d10-0c74-45ec-a293-31e29ebb1787 on NUMA socket -1
> vmbus_probe_one_driver(): Invalid NUMA socket, default to 0
> vmbus_probe_one_driver(): probe driver: net_netvsc
> eth_hn_probe(): >>
> eth_dev_vmbus_allocate(): eth_dev_vmbus_allocate: Allocating eth dev for
> 83a43d10-0c74-45ec-a293-31e29ebb1787
> eth_dev_vmbus_allocate(): Num of ETH devices after allocation = 0
> eth_hn_dev_init(): >>
> hn_nvs_init(): NVS version 0x60001, NDIS version 6.30
> hn_nvs_conn_rxbuf(): connect rxbuff va=0x7fcbfe0ff000 gpad=0xe1e33
> hn_nvs_conn_rxbuf(): receive buffer size 1728 count 9102
> hn_nvs_conn_chim(): connect send buf va=0x7fcbfd1ff000 gpad=0xe1e34
> hn_nvs_conn_chim(): send buffer 15728640 section size:6144, count:2560
> hn_rndis_init(): RNDIS ver 1.0, aggpkt size 4026531839, aggpkt cnt 8,
> aggpkt align 8
> hn_rndis_link_status(): link status 0x4001000b
> hn_rndis_set_rxfilter(): set RX filter 0 done
> hn_tx_pool_init(): create a TX send pool hn_txd_0 n=2560 size=32 socket=0
> hn_rndis_get_eaddr(): MAC address 00:15:5d:0a:6e:0a
> eth_hn_dev_init(): VMBus max channels 1
> hn_rndis_query_rsscaps(): RX rings 64 indirect 128 caps 0x301
> vmbus_probe_one_driver(): VMBUS device
> a759f3db-77bb-4e7c-ac6f-504c268c7f2b on NUMA socket -1
> vmbus_probe_one_driver(): Invalid NUMA socket, default to 0
> vmbus_probe_one_driver(): probe driver: net_netvsc
> eth_hn_probe(): >>
> eth_dev_vmbus_allocate(): eth_dev_vmbus_allocate: Allocating eth dev for
> a759f3db-77bb-4e7c-ac6f-504c268c7f2b
> eth_dev_vmbus_allocate(): Num of ETH devices after allocation = 1
> eth_hn_dev_init(): >>
> hn_nvs_init(): NVS version 0x60001, NDIS version 6.30
> hn_nvs_conn_rxbuf(): connect rxbuff va=0x7fcbf5cfe000 gpad=0xe1e30
> hn_nvs_conn_rxbuf(): receive buffer size 1728 count 9102
> hn_nvs_conn_chim(): connect send buf va=0x7fcbf4dfe000 gpad=0xe1e31
> hn_nvs_conn_chim(): send buffer 15728640 section size:6144, count:2560
> hn_rndis_init(): RNDIS ver 1.0, aggpkt size 4026531839, aggpkt cnt 8,
> aggpkt align 8
> hn_rndis_link_status(): link status 0x4001000b
> hn_rndis_set_rxfilter(): set RX filter 0 done
> hn_tx_pool_init(): create a TX send pool hn_txd_1 n=2560 size=32 socket=0
> hn_rndis_get_eaddr(): MAC address 00:15:5d:0a:6e:09
> eth_hn_dev_init(): VMBus max channels 1
> hn_rndis_query_rsscaps(): RX rings 64 indirect 128 caps 0x301
> Interactive-mode selected
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176,
> socket=0
> testpmd: preferred mempool ops selected: ring_mp_mc
> Configuring Port 0 (socket 0)
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_dev_configure(): >>
> hn_rndis_link_status(): link status 0x40020006
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_dev_tx_queue_setup(): >>
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_dev_rx_queue_setup(): >>
> hn_dev_start(): >>
> hn_rndis_set_rxfilter(): set RX filter 0xd done
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_rndis_set_rxfilter(): set RX filter 0x9 done
> hn_rndis_set_rxfilter(): set RX filter 0x9 done
> hn_dev_link_update(): Port 0 is up
> Port 0: 00:15:5D:0A:6E:0A
> Configuring Port 1 (socket 0)
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_dev_configure(): >>
> hn_rndis_link_status(): link status 0x40020006
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_dev_tx_queue_setup(): >>
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_dev_rx_queue_setup(): >>
> hn_dev_start(): >>
> hn_rndis_set_rxfilter(): set RX filter 0xd done
> hn_dev_info_get(): >>
> hn_rndis_get_offload(): offload capa Tx 0x802f Rx 0x180f
> hn_rndis_set_rxfilter(): set RX filter 0x9 done
> hn_rndis_set_rxfilter(): set RX filter 0x9 done
> hn_dev_link_update(): Port 1 is up
> Port 1: 00:15:5D:0A:6E:09
> Checking link statuses...
> Done
> hn_rndis_set_rxfilter(): set RX filter 0x20 done
> hn_rndis_set_rxfilter(): set RX filter 0x20 done
> testpmd> start
> io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support
> enabled, MP over anonymous pages disabled
> Logical Core 1 (socket 0) forwards packets on 2 streams:
> RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
> RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
>
> io packet forwarding packets/burst=32
> nb forwarding cores=1 - nb forwarding ports=2
> port 0: RX queue number: 1 Tx queue number: 1
> Rx offloads=0x1000 Tx offloads=0x0
> RX queue: 0
> RX desc=0 - RX free threshold=0
> RX threshold registers: pthresh=0 hthresh=0 wthresh=0
> RX Offloads=0x0
> TX queue: 0
> TX desc=0 - TX free threshold=0
> TX threshold registers: pthresh=0 hthresh=0 wthresh=0
> TX offloads=0x0 - TX RS bit threshold=0
> port 1: RX queue number: 1 Tx queue number: 1
> Rx offloads=0x1000 Tx offloads=0x0
> RX queue: 0
> RX desc=0 - RX free threshold=0
> RX threshold registers: pthresh=0 hthresh=0 wthresh=0
> RX Offloads=0x0
> TX queue: 0
> TX desc=0 - TX free threshold=0
> TX threshold registers: pthresh=0 hthresh=0 wthresh=0
> TX offloads=0x0 - TX RS bit threshold=0
> hn_dev_stats_get(): >>
> hn_dev_stats_get(): >>
> testpmd> show port stats 0
> hn_dev_stats_get(): >>
>
> ######################## NIC statistics for port 0
> ########################
> RX-packets: 0 RX-missed: 0 RX-bytes: 0
> RX-errors: 0
> RX-nombuf: 0
> TX-packets: 0 TX-errors: 0 TX-bytes: 0
>
> Throughput (since last show)
> Rx-pps: 0
> Tx-pps: 0
>
> ############################################################################
> testpmd> show port stats 1
> hn_dev_stats_get(): >>
>
> ######################## NIC statistics for port 1
> ########################
> RX-packets: 0 RX-missed: 0 RX-bytes: 0
> RX-errors: 0
> RX-nombuf: 0
> TX-packets: 0 TX-errors: 0 TX-bytes: 0
>
> Throughput (since last show)
> Rx-pps: 0
> Tx-pps: 0
>
> ############################################################################
> testpmd> show port stats 1
> hn_dev_stats_get(): >>
>
> ######################## NIC statistics for port 1
> ########################
> RX-packets: 0 RX-missed: 0 RX-bytes: 0
> RX-errors: 0
> RX-nombuf: 0
> TX-packets: 0 TX-errors: 0 TX-bytes: 0
>
> Throughput (since last show)
> Rx-pps: 0
> Tx-pps: 0
>
> ############################################################################
> testpmd> quit
> Telling cores to stop...
> Waiting for lcores to finish...
> hn_dev_stats_get(): >>
>
> ---------------------- Forward statistics for port 0
> ----------------------
> RX-packets: 0 RX-dropped: 0 RX-total: 0
> TX-packets: 0 TX-dropped: 0 TX-total: 0
>
> ----------------------------------------------------------------------------
> hn_dev_stats_get(): >>
>
> ---------------------- Forward statistics for port 1
> ----------------------
> RX-packets: 0 RX-dropped: 0 RX-total: 0
> TX-packets: 0 TX-dropped: 0 TX-total: 0
>
> ----------------------------------------------------------------------------
>
> +++++++++++++++ Accumulated forward statistics for all
> ports+++++++++++++++
> RX-packets: 0 RX-dropped: 0 RX-total: 0
> TX-packets: 0 TX-dropped: 0 TX-total: 0
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> Done.
>
> Shutting down port 0...
> Stopping ports...
> hn_dev_stop(): >>
> hn_rndis_set_rxfilter(): set RX filter 0 done
> Done
> Closing ports...
> hn_dev_close(): close
> Done
>
> Shutting down port 1...
> Stopping ports...
> hn_dev_stop(): >>
> hn_rndis_set_rxfilter(): set RX filter 0 done
> Done
> Closing ports...
> hn_dev_close(): close
> Done
>
> Bye...
>
> Shutting down port 0...
> Stopping ports...
> Done
> Closing ports...
> Port 0 is already closed
> Done
>
> Shutting down port 1...
> Stopping ports...
> Done
> Closing ports...
> Port 1 is already closed
> Done
>
> Bye...
>
>
next prev parent reply other threads:[~2018-05-29 15:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-29 10:56 Giridharan, Ganesan
2018-05-29 15:22 ` Stephen Hemminger [this message]
2018-05-29 15:29 ` Giridharan, Ganesan
2018-05-29 16:32 ` Giridharan, Ganesan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAOaVG159h5fPjmZe=L0WSNjY0VFjmOv1UPttGhAdoBTQ9fZTXw@mail.gmail.com' \
--to=stephen@networkplumber.org \
--cc=ggiridharan@rbbn.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).