* [dpdk-users] Unsupported kernel driver
@ 2018-08-14 5:54 Aaron Hughes
2018-08-14 11:32 ` Rosen, Rami
0 siblings, 1 reply; 4+ messages in thread
From: Aaron Hughes @ 2018-08-14 5:54 UTC (permalink / raw)
To: users
I'm having trouble getting testpmd to work with an Intel X710. I'm seeing
an unsupported kernel driver error. Based on this page I think I'm using
the correct kernel driver:
http://doc.dpdk.org/guides/nics/i40e.html#recommended-matching-list
Does anyone have any idea what I'm doing wrong?
My system info:
CentOS release 6.5 (Final)
Intel X710 with version 5.05 firmware
Kernel Driver: i40e version 1.5.23 (From Intel)
DPDK version: 17.05
/tmp/testpmd --log-level=8 -w 05:00.0EAL: Detected lcore 0 as core 0 on
socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 8 on socket 0
EAL: Detected lcore 6 as core 9 on socket 0
EAL: Detected lcore 7 as core 10 on socket 0
EAL: Detected lcore 8 as core 11 on socket 0
EAL: Detected lcore 9 as core 12 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 1 on socket 0
EAL: Detected lcore 12 as core 2 on socket 0
EAL: Detected lcore 13 as core 3 on socket 0
EAL: Detected lcore 14 as core 4 on socket 0
EAL: Detected lcore 15 as core 8 on socket 0
EAL: Detected lcore 16 as core 9 on socket 0
EAL: Detected lcore 17 as core 10 on socket 0
EAL: Detected lcore 18 as core 11 on socket 0
EAL: Detected lcore 19 as core 12 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 20 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7fb9e9400000 (size = 0x200000)
EAL: Ask a virtual area of 0x7fc00000 bytes
EAL: Virtual area found at 0x7fb969600000 (size = 0x7fc00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7fb969200000 (size = 0x200000)
EAL: Requesting 1024 pages of size 2MB from socket 0
EAL: TSC frequency is ~2394234 KHz
EAL: Master lcore 0 is ready (tid=e9afc8c0;cpuset=[0])
EAL: lcore 10 is ready (tid=62df5700;cpuset=[10])
EAL: lcore 2 is ready (tid=67dfd700;cpuset=[2])
EAL: lcore 1 is ready (tid=687fe700;cpuset=[1])
EAL: lcore 18 is ready (tid=5dded700;cpuset=[18])
EAL: lcore 13 is ready (tid=60ff2700;cpuset=[13])
EAL: lcore 3 is ready (tid=673fc700;cpuset=[3])
EAL: lcore 6 is ready (tid=655f9700;cpuset=[6])
EAL: lcore 17 is ready (tid=5e7ee700;cpuset=[17])
EAL: lcore 9 is ready (tid=637f6700;cpuset=[9])
EAL: lcore 12 is ready (tid=619f3700;cpuset=[12])
EAL: lcore 7 is ready (tid=64bf8700;cpuset=[7])
EAL: lcore 4 is ready (tid=669fb700;cpuset=[4])
EAL: lcore 8 is ready (tid=641f7700;cpuset=[8])
EAL: lcore 14 is ready (tid=605f1700;cpuset=[14])
EAL: lcore 19 is ready (tid=5d3ec700;cpuset=[19])
EAL: lcore 16 is ready (tid=5f1ef700;cpuset=[16])
EAL: lcore 5 is ready (tid=65ffa700;cpuset=[5])
EAL: lcore 15 is ready (tid=5fbf0700;cpuset=[15])
EAL: lcore 11 is ready (tid=623f4700;cpuset=[11])
EAL: Driver (net_ark) doesn't match the device
EAL: Driver (net_avp) doesn't match the device
EAL: Driver (net_bnxt) doesn't match the device
EAL: Driver (net_cxgbe) doesn't match the device
EAL: Driver (net_e1000_igb) doesn't match the device
EAL: Driver (net_e1000_igb_vf) doesn't match the device
EAL: Driver (net_e1000_em) doesn't match the device
EAL: Driver (net_ena) doesn't match the device
EAL: Driver (net_enic) doesn't match the device
EAL: Driver (net_fm10k) doesn't match the device
EAL: PCI device 0000:05:00.0 on NUMA socket -1
EAL: probe driver: 8086:1572 net_i40e
EAL: Not managed by a supported kernel driver, skipped
EAL: Driver (net_i40e_vf) doesn't match the device
EAL: Driver (net_ixgbe) doesn't match the device
EAL: Driver (net_ixgbe_vf) doesn't match the device
EAL: Driver (net_liovf) doesn't match the device
EAL: Driver (net_nfp) doesn't match the device
EAL: Driver (net_qede) doesn't match the device
EAL: Driver (net_qede_vf) doesn't match the device
EAL: Driver (net_sfc_efx) doesn't match the device
EAL: Driver (net_thunderx) doesn't match the device
EAL: Driver (net_virtio) doesn't match the device
EAL: Driver (net_vmxnet3) doesn't match the device
EAL: Driver (event_skeleton_pci) doesn't match the device
EAL: Driver (octeontx_ssowvf) doesn't match the device
EAL: Driver (octeontx_ssovf) doesn't match the device
EAL: No probed ethernet devices
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-users] Unsupported kernel driver
2018-08-14 5:54 [dpdk-users] Unsupported kernel driver Aaron Hughes
@ 2018-08-14 11:32 ` Rosen, Rami
2018-08-14 13:55 ` Aaron Hughes
0 siblings, 1 reply; 4+ messages in thread
From: Rosen, Rami @ 2018-08-14 11:32 UTC (permalink / raw)
To: Aaron Hughes, users
Hi Aaron,
What does
dpdk-17.05/usertools/dpdk-devbind.py -s
show ?
Regards,
Rami Rosen
-----Original Message-----
From: users [mailto:users-bounces@dpdk.org] On Behalf Of Aaron Hughes
Sent: Tuesday, August 14, 2018 08:54
To: users@dpdk.org
Subject: [dpdk-users] Unsupported kernel driver
I'm having trouble getting testpmd to work with an Intel X710. I'm seeing an unsupported kernel driver error. Based on this page I think I'm using the correct kernel driver:
http://doc.dpdk.org/guides/nics/i40e.html#recommended-matching-list
Does anyone have any idea what I'm doing wrong?
My system info:
CentOS release 6.5 (Final)
Intel X710 with version 5.05 firmware
Kernel Driver: i40e version 1.5.23 (From Intel)
DPDK version: 17.05
/tmp/testpmd --log-level=8 -w 05:00.0EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 8 on socket 0
EAL: Detected lcore 6 as core 9 on socket 0
EAL: Detected lcore 7 as core 10 on socket 0
EAL: Detected lcore 8 as core 11 on socket 0
EAL: Detected lcore 9 as core 12 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 1 on socket 0
EAL: Detected lcore 12 as core 2 on socket 0
EAL: Detected lcore 13 as core 3 on socket 0
EAL: Detected lcore 14 as core 4 on socket 0
EAL: Detected lcore 15 as core 8 on socket 0
EAL: Detected lcore 16 as core 9 on socket 0
EAL: Detected lcore 17 as core 10 on socket 0
EAL: Detected lcore 18 as core 11 on socket 0
EAL: Detected lcore 19 as core 12 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 20 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7fb9e9400000 (size = 0x200000)
EAL: Ask a virtual area of 0x7fc00000 bytes
EAL: Virtual area found at 0x7fb969600000 (size = 0x7fc00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7fb969200000 (size = 0x200000)
EAL: Requesting 1024 pages of size 2MB from socket 0
EAL: TSC frequency is ~2394234 KHz
EAL: Master lcore 0 is ready (tid=e9afc8c0;cpuset=[0])
EAL: lcore 10 is ready (tid=62df5700;cpuset=[10])
EAL: lcore 2 is ready (tid=67dfd700;cpuset=[2])
EAL: lcore 1 is ready (tid=687fe700;cpuset=[1])
EAL: lcore 18 is ready (tid=5dded700;cpuset=[18])
EAL: lcore 13 is ready (tid=60ff2700;cpuset=[13])
EAL: lcore 3 is ready (tid=673fc700;cpuset=[3])
EAL: lcore 6 is ready (tid=655f9700;cpuset=[6])
EAL: lcore 17 is ready (tid=5e7ee700;cpuset=[17])
EAL: lcore 9 is ready (tid=637f6700;cpuset=[9])
EAL: lcore 12 is ready (tid=619f3700;cpuset=[12])
EAL: lcore 7 is ready (tid=64bf8700;cpuset=[7])
EAL: lcore 4 is ready (tid=669fb700;cpuset=[4])
EAL: lcore 8 is ready (tid=641f7700;cpuset=[8])
EAL: lcore 14 is ready (tid=605f1700;cpuset=[14])
EAL: lcore 19 is ready (tid=5d3ec700;cpuset=[19])
EAL: lcore 16 is ready (tid=5f1ef700;cpuset=[16])
EAL: lcore 5 is ready (tid=65ffa700;cpuset=[5])
EAL: lcore 15 is ready (tid=5fbf0700;cpuset=[15])
EAL: lcore 11 is ready (tid=623f4700;cpuset=[11])
EAL: Driver (net_ark) doesn't match the device
EAL: Driver (net_avp) doesn't match the device
EAL: Driver (net_bnxt) doesn't match the device
EAL: Driver (net_cxgbe) doesn't match the device
EAL: Driver (net_e1000_igb) doesn't match the device
EAL: Driver (net_e1000_igb_vf) doesn't match the device
EAL: Driver (net_e1000_em) doesn't match the device
EAL: Driver (net_ena) doesn't match the device
EAL: Driver (net_enic) doesn't match the device
EAL: Driver (net_fm10k) doesn't match the device
EAL: PCI device 0000:05:00.0 on NUMA socket -1
EAL: probe driver: 8086:1572 net_i40e
EAL: Not managed by a supported kernel driver, skipped
EAL: Driver (net_i40e_vf) doesn't match the device
EAL: Driver (net_ixgbe) doesn't match the device
EAL: Driver (net_ixgbe_vf) doesn't match the device
EAL: Driver (net_liovf) doesn't match the device
EAL: Driver (net_nfp) doesn't match the device
EAL: Driver (net_qede) doesn't match the device
EAL: Driver (net_qede_vf) doesn't match the device
EAL: Driver (net_sfc_efx) doesn't match the device
EAL: Driver (net_thunderx) doesn't match the device
EAL: Driver (net_virtio) doesn't match the device
EAL: Driver (net_vmxnet3) doesn't match the device
EAL: Driver (event_skeleton_pci) doesn't match the device
EAL: Driver (octeontx_ssowvf) doesn't match the device
EAL: Driver (octeontx_ssovf) doesn't match the device
EAL: No probed ethernet devices
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-users] Unsupported kernel driver
2018-08-14 11:32 ` Rosen, Rami
@ 2018-08-14 13:55 ` Aaron Hughes
2018-08-14 18:51 ` Rosen, Rami
0 siblings, 1 reply; 4+ messages in thread
From: Aaron Hughes @ 2018-08-14 13:55 UTC (permalink / raw)
To: Rosen, Rami; +Cc: users
Hi Rami,
/tmp/dpdk-devbind.py -s
Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Controller 10-Gigabit X540-AT2 1528' drv=igb_uio
unused=
Network devices using kernel driver
===================================
0000:03:00.1 'Ethernet Controller 10-Gigabit X540-AT2 1528' if=eth1
drv=ixgbe unused=igb_uio
0000:05:00.0 'Device 1572' if=eth6 drv=i40e unused=igb_uio *Active*
0000:05:00.1 'Device 1572' if=eth7 drv=i40e unused=igb_uio *Active*
0000:08:00.0 'I350 Gigabit Network Connection 1521' if=eth2 drv=igb
unused=igb_uio *Active*
0000:08:00.1 'I350 Gigabit Network Connection 1521' if=eth3 drv=igb
unused=igb_uio
0000:08:00.2 'I350 Gigabit Network Connection 1521' if=eth4 drv=igb
unused=igb_uio
0000:08:00.3 'I350 Gigabit Network Connection 1521' if=eth5 drv=igb
unused=igb_uio
Other Network devices
=====================
<none>
Crypto devices using DPDK-compatible driver
===========================================
<none>
Crypto devices using kernel driver
==================================
<none>
Other Crypto devices
====================
<none>
Eventdev devices using DPDK-compatible driver
=============================================
<none>
Eventdev devices using kernel driver
====================================
<none>
Other Eventdev devices
======================
<none>
Mempool devices using DPDK-compatible driver
============================================
<none>
Mempool devices using kernel driver
===================================
<none>
Other Mempool devices
=====================
<none>
On Tue, Aug 14, 2018 at 6:32 AM Rosen, Rami <rami.rosen@intel.com> wrote:
> Hi Aaron,
>
> What does
> dpdk-17.05/usertools/dpdk-devbind.py -s
> show ?
>
> Regards,
> Rami Rosen
>
> -----Original Message-----
> From: users [mailto:users-bounces@dpdk.org] On Behalf Of Aaron Hughes
> Sent: Tuesday, August 14, 2018 08:54
> To: users@dpdk.org
> Subject: [dpdk-users] Unsupported kernel driver
>
> I'm having trouble getting testpmd to work with an Intel X710. I'm seeing
> an unsupported kernel driver error. Based on this page I think I'm using
> the correct kernel driver:
>
> http://doc.dpdk.org/guides/nics/i40e.html#recommended-matching-list
>
>
> Does anyone have any idea what I'm doing wrong?
>
>
>
> My system info:
> CentOS release 6.5 (Final)
> Intel X710 with version 5.05 firmware
>
> Kernel Driver: i40e version 1.5.23 (From Intel)
>
> DPDK version: 17.05
>
>
>
> /tmp/testpmd --log-level=8 -w 05:00.0EAL: Detected lcore 0 as core 0 on
> socket 0
> EAL: Detected lcore 1 as core 1 on socket 0
> EAL: Detected lcore 2 as core 2 on socket 0
> EAL: Detected lcore 3 as core 3 on socket 0
> EAL: Detected lcore 4 as core 4 on socket 0
> EAL: Detected lcore 5 as core 8 on socket 0
> EAL: Detected lcore 6 as core 9 on socket 0
> EAL: Detected lcore 7 as core 10 on socket 0
> EAL: Detected lcore 8 as core 11 on socket 0
> EAL: Detected lcore 9 as core 12 on socket 0
> EAL: Detected lcore 10 as core 0 on socket 0
> EAL: Detected lcore 11 as core 1 on socket 0
> EAL: Detected lcore 12 as core 2 on socket 0
> EAL: Detected lcore 13 as core 3 on socket 0
> EAL: Detected lcore 14 as core 4 on socket 0
> EAL: Detected lcore 15 as core 8 on socket 0
> EAL: Detected lcore 16 as core 9 on socket 0
> EAL: Detected lcore 17 as core 10 on socket 0
> EAL: Detected lcore 18 as core 11 on socket 0
> EAL: Detected lcore 19 as core 12 on socket 0
> EAL: Support maximum 128 logical core(s) by configuration.
> EAL: Detected 20 lcore(s)
> EAL: Setting up physically contiguous memory...
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7fb9e9400000 (size = 0x200000)
> EAL: Ask a virtual area of 0x7fc00000 bytes
> EAL: Virtual area found at 0x7fb969600000 (size = 0x7fc00000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7fb969200000 (size = 0x200000)
> EAL: Requesting 1024 pages of size 2MB from socket 0
> EAL: TSC frequency is ~2394234 KHz
> EAL: Master lcore 0 is ready (tid=e9afc8c0;cpuset=[0])
> EAL: lcore 10 is ready (tid=62df5700;cpuset=[10])
> EAL: lcore 2 is ready (tid=67dfd700;cpuset=[2])
> EAL: lcore 1 is ready (tid=687fe700;cpuset=[1])
> EAL: lcore 18 is ready (tid=5dded700;cpuset=[18])
> EAL: lcore 13 is ready (tid=60ff2700;cpuset=[13])
> EAL: lcore 3 is ready (tid=673fc700;cpuset=[3])
> EAL: lcore 6 is ready (tid=655f9700;cpuset=[6])
> EAL: lcore 17 is ready (tid=5e7ee700;cpuset=[17])
> EAL: lcore 9 is ready (tid=637f6700;cpuset=[9])
> EAL: lcore 12 is ready (tid=619f3700;cpuset=[12])
> EAL: lcore 7 is ready (tid=64bf8700;cpuset=[7])
> EAL: lcore 4 is ready (tid=669fb700;cpuset=[4])
> EAL: lcore 8 is ready (tid=641f7700;cpuset=[8])
> EAL: lcore 14 is ready (tid=605f1700;cpuset=[14])
> EAL: lcore 19 is ready (tid=5d3ec700;cpuset=[19])
> EAL: lcore 16 is ready (tid=5f1ef700;cpuset=[16])
> EAL: lcore 5 is ready (tid=65ffa700;cpuset=[5])
> EAL: lcore 15 is ready (tid=5fbf0700;cpuset=[15])
> EAL: lcore 11 is ready (tid=623f4700;cpuset=[11])
> EAL: Driver (net_ark) doesn't match the device
> EAL: Driver (net_avp) doesn't match the device
> EAL: Driver (net_bnxt) doesn't match the device
> EAL: Driver (net_cxgbe) doesn't match the device
> EAL: Driver (net_e1000_igb) doesn't match the device
> EAL: Driver (net_e1000_igb_vf) doesn't match the device
> EAL: Driver (net_e1000_em) doesn't match the device
> EAL: Driver (net_ena) doesn't match the device
> EAL: Driver (net_enic) doesn't match the device
> EAL: Driver (net_fm10k) doesn't match the device
> EAL: PCI device 0000:05:00.0 on NUMA socket -1
> EAL: probe driver: 8086:1572 net_i40e
> EAL: Not managed by a supported kernel driver, skipped
> EAL: Driver (net_i40e_vf) doesn't match the device
> EAL: Driver (net_ixgbe) doesn't match the device
> EAL: Driver (net_ixgbe_vf) doesn't match the device
> EAL: Driver (net_liovf) doesn't match the device
> EAL: Driver (net_nfp) doesn't match the device
> EAL: Driver (net_qede) doesn't match the device
> EAL: Driver (net_qede_vf) doesn't match the device
> EAL: Driver (net_sfc_efx) doesn't match the device
> EAL: Driver (net_thunderx) doesn't match the device
> EAL: Driver (net_virtio) doesn't match the device
> EAL: Driver (net_vmxnet3) doesn't match the device
> EAL: Driver (event_skeleton_pci) doesn't match the device
> EAL: Driver (octeontx_ssowvf) doesn't match the device
> EAL: Driver (octeontx_ssovf) doesn't match the device
> EAL: No probed ethernet devices
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-users] Unsupported kernel driver
2018-08-14 13:55 ` Aaron Hughes
@ 2018-08-14 18:51 ` Rosen, Rami
0 siblings, 0 replies; 4+ messages in thread
From: Rosen, Rami @ 2018-08-14 18:51 UTC (permalink / raw)
To: Aaron Hughes; +Cc: users
Hi Aaron,
From the log you sent, we can see that the PCI ID of
the nic you bind to DPDK is 0000:03:00.0.
(This is the entry in the first section, “Network devices using DPDK-compatible driver”).
This NIC is not an I40E. It is an IXGBE nic.
However, in the command line that you launch to start testpmd you use a different PCI ID,
/tmp/testpmd --log-level=8 -w 05:00.0 ….
05:00.0 is a PCI ID of I40E.
(-w stands for whitelist).
So in order that it will work with I40E, you should first bind it, using its PCI ID (which is 05:00.0) to DPDK by
“dpdk-devbind -b igb_uio 05:00.0”
and then launch the same testpmd command that you already used.
Since this I40E has two ports, you can also bind the second one to DPDK by
“dpdk-devbind -b igb_uio 05:00.1”
(You can also unbind 0000:03:00.0 if you don’t need it for any DPDK app by dpdk-devbind -u 0000:03:00.0).
If still you get any issues after binding 05:00.0,
please post the full log you get when running testpmd.
Regards,
Rami Rosen
From: Aaron Hughes [mailto:hughesac@gmail.com]
Sent: Tuesday, August 14, 2018 16:56
To: Rosen, Rami <rami.rosen@intel.com>
Cc: users@dpdk.org
Subject: Re: [dpdk-users] Unsupported kernel driver
Hi Rami,
/tmp/dpdk-devbind.py -s
Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Controller 10-Gigabit X540-AT2 1528' drv=igb_uio unused=
Network devices using kernel driver
===================================
0000:03:00.1 'Ethernet Controller 10-Gigabit X540-AT2 1528' if=eth1 drv=ixgbe unused=igb_uio
0000:05:00.0 'Device 1572' if=eth6 drv=i40e unused=igb_uio *Active*
0000:05:00.1 'Device 1572' if=eth7 drv=i40e unused=igb_uio *Active*
0000:08:00.0 'I350 Gigabit Network Connection 1521' if=eth2 drv=igb unused=igb_uio *Active*
0000:08:00.1 'I350 Gigabit Network Connection 1521' if=eth3 drv=igb unused=igb_uio
0000:08:00.2 'I350 Gigabit Network Connection 1521' if=eth4 drv=igb unused=igb_uio
0000:08:00.3 'I350 Gigabit Network Connection 1521' if=eth5 drv=igb unused=igb_uio
Other Network devices
=====================
<none>
Crypto devices using DPDK-compatible driver
===========================================
<none>
Crypto devices using kernel driver
==================================
<none>
Other Crypto devices
====================
<none>
Eventdev devices using DPDK-compatible driver
=============================================
<none>
Eventdev devices using kernel driver
====================================
<none>
Other Eventdev devices
======================
<none>
Mempool devices using DPDK-compatible driver
============================================
<none>
Mempool devices using kernel driver
===================================
<none>
Other Mempool devices
=====================
<none>
On Tue, Aug 14, 2018 at 6:32 AM Rosen, Rami <rami.rosen@intel.com<mailto:rami.rosen@intel.com>> wrote:
Hi Aaron,
What does
dpdk-17.05/usertools/dpdk-devbind.py -s
show ?
Regards,
Rami Rosen
-----Original Message-----
From: users [mailto:users-bounces@dpdk.org<mailto:users-bounces@dpdk.org>] On Behalf Of Aaron Hughes
Sent: Tuesday, August 14, 2018 08:54
To: users@dpdk.org<mailto:users@dpdk.org>
Subject: [dpdk-users] Unsupported kernel driver
I'm having trouble getting testpmd to work with an Intel X710. I'm seeing an unsupported kernel driver error. Based on this page I think I'm using the correct kernel driver:
http://doc.dpdk.org/guides/nics/i40e.html#recommended-matching-list
Does anyone have any idea what I'm doing wrong?
My system info:
CentOS release 6.5 (Final)
Intel X710 with version 5.05 firmware
Kernel Driver: i40e version 1.5.23 (From Intel)
DPDK version: 17.05
/tmp/testpmd --log-level=8 -w 05:00.0EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 8 on socket 0
EAL: Detected lcore 6 as core 9 on socket 0
EAL: Detected lcore 7 as core 10 on socket 0
EAL: Detected lcore 8 as core 11 on socket 0
EAL: Detected lcore 9 as core 12 on socket 0
EAL: Detected lcore 10 as core 0 on socket 0
EAL: Detected lcore 11 as core 1 on socket 0
EAL: Detected lcore 12 as core 2 on socket 0
EAL: Detected lcore 13 as core 3 on socket 0
EAL: Detected lcore 14 as core 4 on socket 0
EAL: Detected lcore 15 as core 8 on socket 0
EAL: Detected lcore 16 as core 9 on socket 0
EAL: Detected lcore 17 as core 10 on socket 0
EAL: Detected lcore 18 as core 11 on socket 0
EAL: Detected lcore 19 as core 12 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 20 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7fb9e9400000 (size = 0x200000)
EAL: Ask a virtual area of 0x7fc00000 bytes
EAL: Virtual area found at 0x7fb969600000 (size = 0x7fc00000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7fb969200000 (size = 0x200000)
EAL: Requesting 1024 pages of size 2MB from socket 0
EAL: TSC frequency is ~2394234 KHz
EAL: Master lcore 0 is ready (tid=e9afc8c0;cpuset=[0])
EAL: lcore 10 is ready (tid=62df5700;cpuset=[10])
EAL: lcore 2 is ready (tid=67dfd700;cpuset=[2])
EAL: lcore 1 is ready (tid=687fe700;cpuset=[1])
EAL: lcore 18 is ready (tid=5dded700;cpuset=[18])
EAL: lcore 13 is ready (tid=60ff2700;cpuset=[13])
EAL: lcore 3 is ready (tid=673fc700;cpuset=[3])
EAL: lcore 6 is ready (tid=655f9700;cpuset=[6])
EAL: lcore 17 is ready (tid=5e7ee700;cpuset=[17])
EAL: lcore 9 is ready (tid=637f6700;cpuset=[9])
EAL: lcore 12 is ready (tid=619f3700;cpuset=[12])
EAL: lcore 7 is ready (tid=64bf8700;cpuset=[7])
EAL: lcore 4 is ready (tid=669fb700;cpuset=[4])
EAL: lcore 8 is ready (tid=641f7700;cpuset=[8])
EAL: lcore 14 is ready (tid=605f1700;cpuset=[14])
EAL: lcore 19 is ready (tid=5d3ec700;cpuset=[19])
EAL: lcore 16 is ready (tid=5f1ef700;cpuset=[16])
EAL: lcore 5 is ready (tid=65ffa700;cpuset=[5])
EAL: lcore 15 is ready (tid=5fbf0700;cpuset=[15])
EAL: lcore 11 is ready (tid=623f4700;cpuset=[11])
EAL: Driver (net_ark) doesn't match the device
EAL: Driver (net_avp) doesn't match the device
EAL: Driver (net_bnxt) doesn't match the device
EAL: Driver (net_cxgbe) doesn't match the device
EAL: Driver (net_e1000_igb) doesn't match the device
EAL: Driver (net_e1000_igb_vf) doesn't match the device
EAL: Driver (net_e1000_em) doesn't match the device
EAL: Driver (net_ena) doesn't match the device
EAL: Driver (net_enic) doesn't match the device
EAL: Driver (net_fm10k) doesn't match the device
EAL: PCI device 0000:05:00.0 on NUMA socket -1
EAL: probe driver: 8086:1572 net_i40e
EAL: Not managed by a supported kernel driver, skipped
EAL: Driver (net_i40e_vf) doesn't match the device
EAL: Driver (net_ixgbe) doesn't match the device
EAL: Driver (net_ixgbe_vf) doesn't match the device
EAL: Driver (net_liovf) doesn't match the device
EAL: Driver (net_nfp) doesn't match the device
EAL: Driver (net_qede) doesn't match the device
EAL: Driver (net_qede_vf) doesn't match the device
EAL: Driver (net_sfc_efx) doesn't match the device
EAL: Driver (net_thunderx) doesn't match the device
EAL: Driver (net_virtio) doesn't match the device
EAL: Driver (net_vmxnet3) doesn't match the device
EAL: Driver (event_skeleton_pci) doesn't match the device
EAL: Driver (octeontx_ssowvf) doesn't match the device
EAL: Driver (octeontx_ssovf) doesn't match the device
EAL: No probed ethernet devices
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-08-14 18:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-14 5:54 [dpdk-users] Unsupported kernel driver Aaron Hughes
2018-08-14 11:32 ` Rosen, Rami
2018-08-14 13:55 ` Aaron Hughes
2018-08-14 18:51 ` Rosen, Rami
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).