* [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
@ 2018-01-05 7:38 george.dit
2018-01-05 7:46 ` Nelio Laranjeiro
0 siblings, 1 reply; 10+ messages in thread
From: george.dit @ 2018-01-05 7:38 UTC (permalink / raw)
To: users
Hi,
I noticed that DPDK 17.11 brought some changes regarding the Mellanox
drivers, hence my compilation script does not work for this version of DPDK.
Specifically, the release notes of this version state:
"Enabled the PMD to run on top of upstream Linux kernel and rdma-core libs,
removing the dependency on specific Mellanox OFED libraries."
Previously, I was setting CONFIG_RTE_LIBRTE_MLX5_PMD but now, with this
option set I get build errors in drivers/net/mlx5/mlx5.c.
Could you please provide some guidance on how DPDK is expected to work
without OFED?
Is there any other configuration required?
Thanks,
--
Georgios Katsikas
Industrial Ph.D. Student
Network Intelligence Group
Decision, Networks, and Analytics (DNA) Lab
RISE SICS
E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-01-05 7:38 [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support george.dit
@ 2018-01-05 7:46 ` Nelio Laranjeiro
2018-01-05 8:02 ` george.dit
0 siblings, 1 reply; 10+ messages in thread
From: Nelio Laranjeiro @ 2018-01-05 7:46 UTC (permalink / raw)
To: george.dit; +Cc: users
Hi George
On Fri, Jan 05, 2018 at 08:38:11AM +0100, george.dit@gmail.com wrote:
> Hi,
>
> I noticed that DPDK 17.11 brought some changes regarding the Mellanox
> drivers, hence my compilation script does not work for this version of DPDK.
>
> Specifically, the release notes of this version state:
>
> "Enabled the PMD to run on top of upstream Linux kernel and rdma-core libs,
> removing the dependency on specific Mellanox OFED libraries."
>
> Previously, I was setting CONFIG_RTE_LIBRTE_MLX5_PMD but now, with this
> option set I get build errors in drivers/net/mlx5/mlx5.c.
>
> Could you please provide some guidance on how DPDK is expected to work
> without OFED?
> Is there any other configuration required?
You should find anything useful in the NIC documentation [1], you have
two possibilities, keep using the distribution and install MLNX_OFED
4.2, or update the Linux Kernel and use RDMA-Core, both are explained in
he section "21.5.1. Installation".
Regards,
[1] https://dpdk.org/doc/guides/nics/mlx5.html
--
Nélio Laranjeiro
6WIND
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-01-05 7:46 ` Nelio Laranjeiro
@ 2018-01-05 8:02 ` george.dit
2018-01-05 8:40 ` Nelio Laranjeiro
2018-03-01 13:18 ` wang.yong19
0 siblings, 2 replies; 10+ messages in thread
From: george.dit @ 2018-01-05 8:02 UTC (permalink / raw)
To: Nelio Laranjeiro; +Cc: users
Hi Nelio,
Thanks for the prompt reply and guidance!
My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
With OFED 4.2 everything works on my kernel (v4.4)!
I have one more question: What is the suggested OFED version in order to
have a fully featured NIC with all the DPDK classification/offloading
capabilities?
My NICs are 100G ConnectX-4 (dual and single port).
Best regards,
Georgios
On Fri, Jan 5, 2018 at 8:46 AM, Nelio Laranjeiro <nelio.laranjeiro@6wind.com
> wrote:
> Hi George
>
> On Fri, Jan 05, 2018 at 08:38:11AM +0100, george.dit@gmail.com wrote:
> > Hi,
> >
> > I noticed that DPDK 17.11 brought some changes regarding the Mellanox
> > drivers, hence my compilation script does not work for this version of
> DPDK.
> >
> > Specifically, the release notes of this version state:
> >
> > "Enabled the PMD to run on top of upstream Linux kernel and rdma-core
> libs,
> > removing the dependency on specific Mellanox OFED libraries."
> >
> > Previously, I was setting CONFIG_RTE_LIBRTE_MLX5_PMD but now, with this
> > option set I get build errors in drivers/net/mlx5/mlx5.c.
> >
> > Could you please provide some guidance on how DPDK is expected to work
> > without OFED?
> > Is there any other configuration required?
>
> You should find anything useful in the NIC documentation [1], you have
> two possibilities, keep using the distribution and install MLNX_OFED
> 4.2, or update the Linux Kernel and use RDMA-Core, both are explained in
> he section "21.5.1. Installation".
>
> Regards,
>
> [1] https://dpdk.org/doc/guides/nics/mlx5.html
>
> --
> Nélio Laranjeiro
> 6WIND
>
--
Georgios Katsikas
Industrial Ph.D. Student
Network Intelligence Group
Decision, Networks, and Analytics (DNA) Lab
RISE SICS
E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-01-05 8:02 ` george.dit
@ 2018-01-05 8:40 ` Nelio Laranjeiro
2018-01-05 8:43 ` george.dit
2018-03-01 13:18 ` wang.yong19
1 sibling, 1 reply; 10+ messages in thread
From: Nelio Laranjeiro @ 2018-01-05 8:40 UTC (permalink / raw)
To: george.dit; +Cc: users
On Fri, Jan 05, 2018 at 09:02:54AM +0100, george.dit@gmail.com wrote:
> Hi Nelio,
> Thanks for the prompt reply and guidance!
> My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
> With OFED 4.2 everything works on my kernel (v4.4)!
> I have one more question: What is the suggested OFED version in order to
> have a fully featured NIC with all the DPDK classification/offloading
> capabilities?
> My NICs are 100G ConnectX-4 (dual and single port).
<snip/>
The one referenced in the documentation, you can still download and
install the latest GA from Mellanox website [1] (the link is also in the
documentation).
You can also take a look at features documentation page [2] on DPDK
documentation, those set to 'Y' are supported by the MLNX_OFED version
and (almost) by RDMA-Core.
Regards,
[1] http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers&ssn=l6arvsaqjfc9t768ll2nqa9dh3
[2] https://dpdk.org/doc/guides/nics/overview.html
--
Nélio Laranjeiro
6WIND
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-01-05 8:40 ` Nelio Laranjeiro
@ 2018-01-05 8:43 ` george.dit
2018-01-08 2:38 ` Hui Ling
0 siblings, 1 reply; 10+ messages in thread
From: george.dit @ 2018-01-05 8:43 UTC (permalink / raw)
To: Nelio Laranjeiro; +Cc: users
Great, this is the OFED version I just got.
Your help is much appreciated, thanks!
Best regards,
Georgios
On Fri, Jan 5, 2018 at 9:40 AM, Nelio Laranjeiro <nelio.laranjeiro@6wind.com
> wrote:
> On Fri, Jan 05, 2018 at 09:02:54AM +0100, george.dit@gmail.com wrote:
> > Hi Nelio,
> > Thanks for the prompt reply and guidance!
> > My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
> > With OFED 4.2 everything works on my kernel (v4.4)!
> > I have one more question: What is the suggested OFED version in order
> to
> > have a fully featured NIC with all the DPDK classification/offloading
> > capabilities?
> > My NICs are 100G ConnectX-4 (dual and single port).
> <snip/>
>
> The one referenced in the documentation, you can still download and
> install the latest GA from Mellanox website [1] (the link is also in the
> documentation).
> You can also take a look at features documentation page [2] on DPDK
> documentation, those set to 'Y' are supported by the MLNX_OFED version
> and (almost) by RDMA-Core.
>
> Regards,
>
> [1] http://www.mellanox.com/page/products_dyn?product_family=
> 26&mtag=linux_sw_drivers&ssn=l6arvsaqjfc9t768ll2nqa9dh3
> [2] https://dpdk.org/doc/guides/nics/overview.html
>
> --
> Nélio Laranjeiro
> 6WIND
>
--
Georgios Katsikas
Industrial Ph.D. Student
Network Intelligence Group
Decision, Networks, and Analytics (DNA) Lab
RISE SICS
E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-01-05 8:43 ` george.dit
@ 2018-01-08 2:38 ` Hui Ling
2018-01-08 5:00 ` george.dit
0 siblings, 1 reply; 10+ messages in thread
From: Hui Ling @ 2018-01-08 2:38 UTC (permalink / raw)
To: george.dit; +Cc: Nelio Laranjeiro, users
George,
So using OFED and its upstream libraries with DPDK 17.11 works for you?
Are you running DPDK on VM or with a physical NIC from MLNX?
Hui
On Fri, Jan 5, 2018 at 4:43 PM, <george.dit@gmail.com> wrote:
> Great, this is the OFED version I just got.
> Your help is much appreciated, thanks!
>
> Best regards,
> Georgios
>
> On Fri, Jan 5, 2018 at 9:40 AM, Nelio Laranjeiro <nelio.laranjeiro@6wind.com
>> wrote:
>
>> On Fri, Jan 05, 2018 at 09:02:54AM +0100, george.dit@gmail.com wrote:
>> > Hi Nelio,
>> > Thanks for the prompt reply and guidance!
>> > My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
>> > With OFED 4.2 everything works on my kernel (v4.4)!
>> > I have one more question: What is the suggested OFED version in order
>> to
>> > have a fully featured NIC with all the DPDK classification/offloading
>> > capabilities?
>> > My NICs are 100G ConnectX-4 (dual and single port).
>> <snip/>
>>
>> The one referenced in the documentation, you can still download and
>> install the latest GA from Mellanox website [1] (the link is also in the
>> documentation).
>> You can also take a look at features documentation page [2] on DPDK
>> documentation, those set to 'Y' are supported by the MLNX_OFED version
>> and (almost) by RDMA-Core.
>>
>> Regards,
>>
>> [1] http://www.mellanox.com/page/products_dyn?product_family=
>> 26&mtag=linux_sw_drivers&ssn=l6arvsaqjfc9t768ll2nqa9dh3
>> [2] https://dpdk.org/doc/guides/nics/overview.html
>>
>> --
>> Nélio Laranjeiro
>> 6WIND
>>
>
>
>
> --
> Georgios Katsikas
> Industrial Ph.D. Student
> Network Intelligence Group
> Decision, Networks, and Analytics (DNA) Lab
> RISE SICS
> E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-01-08 2:38 ` Hui Ling
@ 2018-01-08 5:00 ` george.dit
0 siblings, 0 replies; 10+ messages in thread
From: george.dit @ 2018-01-08 5:00 UTC (permalink / raw)
To: Hui Ling; +Cc: Nélio Laranjeiro, users
Hi Hui,
Yes it works after updating to OFED 4.2. I have a physical 100G NIC that
uses mlnx5.
Regards,
Georgios
On Jan 8, 2018 3:38 AM, "Hui Ling" <kelvin.brookletling@gmail.com> wrote:
George,
So using OFED and its upstream libraries with DPDK 17.11 works for you?
Are you running DPDK on VM or with a physical NIC from MLNX?
Hui
On Fri, Jan 5, 2018 at 4:43 PM, <george.dit@gmail.com> wrote:
> Great, this is the OFED version I just got.
> Your help is much appreciated, thanks!
>
> Best regards,
> Georgios
>
> On Fri, Jan 5, 2018 at 9:40 AM, Nelio Laranjeiro <
nelio.laranjeiro@6wind.com
>> wrote:
>
>> On Fri, Jan 05, 2018 at 09:02:54AM +0100, george.dit@gmail.com wrote:
>> > Hi Nelio,
>> > Thanks for the prompt reply and guidance!
>> > My OFED version was 4.1, that's why I was unable to build DPDK
17.11.
>> > With OFED 4.2 everything works on my kernel (v4.4)!
>> > I have one more question: What is the suggested OFED version in
order
>> to
>> > have a fully featured NIC with all the DPDK
classification/offloading
>> > capabilities?
>> > My NICs are 100G ConnectX-4 (dual and single port).
>> <snip/>
>>
>> The one referenced in the documentation, you can still download and
>> install the latest GA from Mellanox website [1] (the link is also in the
>> documentation).
>> You can also take a look at features documentation page [2] on DPDK
>> documentation, those set to 'Y' are supported by the MLNX_OFED version
>> and (almost) by RDMA-Core.
>>
>> Regards,
>>
>> [1] http://www.mellanox.com/page/products_dyn?product_family=
>> 26&mtag=linux_sw_drivers&ssn=l6arvsaqjfc9t768ll2nqa9dh3
>> [2] https://dpdk.org/doc/guides/nics/overview.html
>>
>> --
>> Nélio Laranjeiro
>> 6WIND
>>
>
>
>
> --
> Georgios Katsikas
> Industrial Ph.D. Student
> Network Intelligence Group
> Decision, Networks, and Analytics (DNA) Lab
> RISE SICS
> E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-01-05 8:02 ` george.dit
2018-01-05 8:40 ` Nelio Laranjeiro
@ 2018-03-01 13:18 ` wang.yong19
2018-03-01 13:25 ` Raslan Darawsheh
1 sibling, 1 reply; 10+ messages in thread
From: wang.yong19 @ 2018-03-01 13:18 UTC (permalink / raw)
To: george.dit; +Cc: nelio.laranjeiro, users
Hi,
I met the same problem. My DPDK build environment is "CentOS7.0 + kernel 3.10.0-229.el7.x86_64".
I have download the OFED 4.2 and use the following command to install:
./mlnxofedinstall --skip-distro-check --dpdk --add-kernel-support
/etc/init.d/openibd restart
However, I still met error while I am compiling DPDK-17.11. The error information is :
In file included from /home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4.c:71:0:
/home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4_rxtx.h:44:31: fatal error: infiniband/mlx4dv.h: No such file or directory
#include <infiniband/mlx4dv.h>
^
compilation terminated.
make[6]: *** [mlx4.o] Error 1
make[5]: *** [mlx4] Error 2
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
I checked the "/usr/include/infiniband" directory and I couldn't find the mlx4dv.h file.
Are there any other configurations or steps required? Or the kernel version of linux can't be 3.10 ?
------------------origin------------------
from：george.dit@gmail.com <george.dit@gmail.com>
to：Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
cc：users@dpdk.org <users@dpdk.org>
date：2018年01月05日 16:03
subject：Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
Hi Nelio,
Thanks for the prompt reply and guidance!
My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
With OFED 4.2 everything works on my kernel (v4.4)!
I have one more question: What is the suggested OFED version in order to
have a fully featured NIC with all the DPDK classification/offloading
capabilities?
My NICs are 100G ConnectX-4 (dual and single port).
Best regards,
Georgios
On Fri, Jan 5, 2018 at 8:46 AM, Nelio Laranjeiro <nelio.laranjeiro@6wind.com
> wrote:
> Hi George
>
> On Fri, Jan 05, 2018 at 08:38:11AM +0100, george.dit@gmail.com wrote:
> > Hi,
> >
> > I noticed that DPDK 17.11 brought some changes regarding the Mellanox
> > drivers, hence my compilation script does not work for this version of
> DPDK.
> >
> > Specifically, the release notes of this version state:
> >
> > "Enabled the PMD to run on top of upstream Linux kernel and rdma-core
> libs,
> > removing the dependency on specific Mellanox OFED libraries."
> >
> > Previously, I was setting CONFIG_RTE_LIBRTE_MLX5_PMD but now, with this
> > option set I get build errors in drivers/net/mlx5/mlx5.c.
> >
> > Could you please provide some guidance on how DPDK is expected to work
> > without OFED?
> > Is there any other configuration required?
>
> You should find anything useful in the NIC documentation [1], you have
> two possibilities, keep using the distribution and install MLNX_OFED
> 4.2, or update the Linux Kernel and use RDMA-Core, both are explained in
> he section "21.5.1. Installation".
>
> Regards,
>
> [1] https://dpdk.org/doc/guides/nics/mlx5.html
>
> --
> Nélio Laranjeiro
> 6WIND
>
--
Georgios Katsikas
Industrial Ph.D. Student
Network Intelligence Group
Decision, Networks, and Analytics (DNA) Lab
RISE SICS
E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
2018-03-01 13:18 ` wang.yong19
@ 2018-03-01 13:25 ` Raslan Darawsheh
2018-03-01 13:44 ` [dpdk-users] 答复: " wang.yong19
0 siblings, 1 reply; 10+ messages in thread
From: Raslan Darawsheh @ 2018-03-01 13:25 UTC (permalink / raw)
To: wang.yong19, george.dit; +Cc: Nélio Laranjeiro, users
Hi,
I believe you are missing the --upstream-libs from OFED installation:
Try it as following:
./mlnxofedinstall --skip-distro-check --dpdk --add-kernel-support --upstream-libs /etc/init.d/openibd restart
Then rebuild your DPDK.
Kindest regards,
Raslan Darawsheh
-----Original Message-----
From: users [mailto:users-bounces@dpdk.org] On Behalf Of wang.yong19@zte.com.cn
Sent: Thursday, March 1, 2018 3:19 PM
To: george.dit@gmail.com
Cc: Nélio Laranjeiro <nelio.laranjeiro@6wind.com>; users@dpdk.org
Subject: Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
Hi,
I met the same problem. My DPDK build environment is "CentOS7.0 + kernel 3.10.0-229.el7.x86_64".
I have download the OFED 4.2 and use the following command to install:
./mlnxofedinstall --skip-distro-check --dpdk --add-kernel-support /etc/init.d/openibd restart However, I still met error while I am compiling DPDK-17.11. The error information is :
In file included from /home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4.c:71:0:
/home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4_rxtx.h:44:31: fatal error: infiniband/mlx4dv.h: No such file or directory #include <infiniband/mlx4dv.h>
^
compilation terminated.
make[6]: *** [mlx4.o] Error 1
make[5]: *** [mlx4] Error 2
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
I checked the "/usr/include/infiniband" directory and I couldn't find the mlx4dv.h file.
Are there any other configurations or steps required? Or the kernel version of linux can't be 3.10 ?
------------------origin------------------
from：george.dit@gmail.com <george.dit@gmail.com>
to：Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
cc：users@dpdk.org <users@dpdk.org>
date：2018年01月05日 16:03
subject：Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support Hi Nelio,
Thanks for the prompt reply and guidance!
My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
With OFED 4.2 everything works on my kernel (v4.4)!
I have one more question: What is the suggested OFED version in order to have a fully featured NIC with all the DPDK classification/offloading capabilities?
My NICs are 100G ConnectX-4 (dual and single port).
Best regards,
Georgios
On Fri, Jan 5, 2018 at 8:46 AM, Nelio Laranjeiro <nelio.laranjeiro@6wind.com
> wrote:
> Hi George
>
> On Fri, Jan 05, 2018 at 08:38:11AM +0100, george.dit@gmail.com wrote:
> > Hi,
> >
> > I noticed that DPDK 17.11 brought some changes regarding the
> > Mellanox drivers, hence my compilation script does not work for this
> > version of
> DPDK.
> >
> > Specifically, the release notes of this version state:
> >
> > "Enabled the PMD to run on top of upstream Linux kernel and
> > rdma-core
> libs,
> > removing the dependency on specific Mellanox OFED libraries."
> >
> > Previously, I was setting CONFIG_RTE_LIBRTE_MLX5_PMD but now, with
> > this option set I get build errors in drivers/net/mlx5/mlx5.c.
> >
> > Could you please provide some guidance on how DPDK is expected to
> > work without OFED?
> > Is there any other configuration required?
>
> You should find anything useful in the NIC documentation [1], you have
> two possibilities, keep using the distribution and install MLNX_OFED
> 4.2, or update the Linux Kernel and use RDMA-Core, both are explained
> in he section "21.5.1. Installation".
>
> Regards,
>
> [1]
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdpd
> k.org%2Fdoc%2Fguides%2Fnics%2Fmlx5.html&data=02%7C01%7Crasland%40mella
> nox.com%7Cb975ffe6ec1e4dd22b4808d57f76feb3%7Ca652971c7d2e4d9ba6a4d1492
> 56f461b%7C0%7C0%7C636555071431060900&sdata=EOrSSjM9A7MsoWpvQOtW%2FzxnY
> wXaULG53hU%2BQjA4XK8%3D&reserved=0
>
> --
> Nélio Laranjeiro
> 6WIND
>
--
Georgios Katsikas
Industrial Ph.D. Student
Network Intelligence Group
Decision, Networks, and Analytics (DNA) Lab RISE SICS
E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
* [dpdk-users] 答复: RE: Compile DPDK 17.11 with Mellanox NIC support
2018-03-01 13:25 ` Raslan Darawsheh
@ 2018-03-01 13:44 ` wang.yong19
0 siblings, 0 replies; 10+ messages in thread
From: wang.yong19 @ 2018-03-01 13:44 UTC (permalink / raw)
To: rasland; +Cc: george.dit, nelio.laranjeiro, users
Thanks for your advice.
It worked after I add the "--upstream-libs" parameter.
I really appreciate your help.
Best regards,
Wang Yong
------------------oringin------------------
from：RaslanDarawsheh <rasland@mellanox.com>
to：汪勇10032886;george.dit@gmail.com <george.dit@gmail.com>
cc：Nélio Laranjeiro <nelio.laranjeiro@6wind.com>users@dpdk.org <users@dpdk.org>
date：2018年03月01日 21:25
subject：RE: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
Hi,
I believe you are missing the --upstream-libs from OFED installation:
Try it as following:
./mlnxofedinstall --skip-distro-check --dpdk --add-kernel-support --upstream-libs /etc/init.d/openibd restart
Then rebuild your DPDK.
Kindest regards,
Raslan Darawsheh
-----Original Message-----
From: users [mailto:users-bounces@dpdk.org] On Behalf Of wang.yong19@zte.com.cn
Sent: Thursday, March 1, 2018 3:19 PM
To: george.dit@gmail.com
Cc: Nélio Laranjeiro <nelio.laranjeiro@6wind.com>; users@dpdk.org
Subject: Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support
Hi,
I met the same problem. My DPDK build environment is "CentOS7.0 + kernel 3.10.0-229.el7.x86_64".
I have download the OFED 4.2 and use the following command to install:
./mlnxofedinstall --skip-distro-check --dpdk --add-kernel-support /etc/init.d/openibd restart However, I still met error while I am compiling DPDK-17.11. The error information is :
In file included from /home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4.c:71:0:
/home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4_rxtx.h:44:31: fatal error: infiniband/mlx4dv.h: No such file or directory #include <infiniband/mlx4dv.h>
^
compilation terminated.
make[6]: *** [mlx4.o] Error 1
make[5]: *** [mlx4] Error 2
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
I checked the "/usr/include/infiniband" directory and I couldn't find the mlx4dv.h file.
Are there any other configurations or steps required? Or the kernel version of linux can't be 3.10 ?
------------------origin------------------
from：george.dit@gmail.com <george.dit@gmail.com>
to：Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
cc：users@dpdk.org <users@dpdk.org>
date：2018年01月05日 16:03
subject：Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support Hi Nelio,
Thanks for the prompt reply and guidance!
My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
With OFED 4.2 everything works on my kernel (v4.4)!
I have one more question: What is the suggested OFED version in order to have a fully featured NIC with all the DPDK classification/offloading capabilities?
My NICs are 100G ConnectX-4 (dual and single port).
Best regards,
Georgios
On Fri, Jan 5, 2018 at 8:46 AM, Nelio Laranjeiro <nelio.laranjeiro@6wind.com
> wrote:
> Hi George
>
> On Fri, Jan 05, 2018 at 08:38:11AM +0100, george.dit@gmail.com wrote:
> > Hi,
> >
> > I noticed that DPDK 17.11 brought some changes regarding the
> > Mellanox drivers, hence my compilation script does not work for this
> > version of
> DPDK.
> >
> > Specifically, the release notes of this version state:
> >
> > "Enabled the PMD to run on top of upstream Linux kernel and
> > rdma-core
> libs,
> > removing the dependency on specific Mellanox OFED libraries."
> >
> > Previously, I was setting CONFIG_RTE_LIBRTE_MLX5_PMD but now, with
> > this option set I get build errors in drivers/net/mlx5/mlx5.c.
> >
> > Could you please provide some guidance on how DPDK is expected to
> > work without OFED?
> > Is there any other configuration required?
>
> You should find anything useful in the NIC documentation [1], you have
> two possibilities, keep using the distribution and install MLNX_OFED
> 4.2, or update the Linux Kernel and use RDMA-Core, both are explained
> in he section "21.5.1. Installation".
>
> Regards,
>
> [1]
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdpd
> k.org%2Fdoc%2Fguides%2Fnics%2Fmlx5.html&data=02%7C01%7Crasland%40mella
> nox.com%7Cb975ffe6ec1e4dd22b4808d57f76feb3%7Ca652971c7d2e4d9ba6a4d1492
> 56f461b%7C0%7C0%7C636555071431060900&sdata=EOrSSjM9A7MsoWpvQOtW%2FzxnY
> wXaULG53hU%2BQjA4XK8%3D&reserved=0
>
> --
> Nélio Laranjeiro
> 6WIND
>
--
Georgios Katsikas
Industrial Ph.D. Student
Network Intelligence Group
Decision, Networks, and Analytics (DNA) Lab RISE SICS
E-Mail: georgios.katsikas@ri.se
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-03-01 13:45 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-05 7:38 [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support george.dit
2018-01-05 7:46 ` Nelio Laranjeiro
2018-01-05 8:02 ` george.dit
2018-01-05 8:40 ` Nelio Laranjeiro
2018-01-05 8:43 ` george.dit
2018-01-08 2:38 ` Hui Ling
2018-01-08 5:00 ` george.dit
2018-03-01 13:18 ` wang.yong19
2018-03-01 13:25 ` Raslan Darawsheh
2018-03-01 13:44 ` [dpdk-users] 答复: " wang.yong19
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).