DPDK usage discussions
 help / color / mirror / Atom feed
* [dpdk-users] MLX5 - PPPoE Decapsulation
@ 2021-02-22 12:44 Tomáš Jánský
  2021-02-24  9:49 ` Asaf Penso
  0 siblings, 1 reply; 2+ messages in thread
From: Tomáš Jánský @ 2021-02-22 12:44 UTC (permalink / raw)
  To: users

Hi,

is it possible to configure my Mellanox card (using mlx5 driver) to
decapsulate PPPoE on incoming packets and then spread the packets evenly to
RX queues based on the addresses of inner IP headers?

Tried RSS, but so far no luck, not sure if this can be done using RTE Flow
API.

Thanks.

Tomas

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-02-24  9:50 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-22 12:44 [dpdk-users] MLX5 - PPPoE Decapsulation Tomáš Jánský
2021-02-24  9:49 ` Asaf Penso

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ https://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git