Re: [dpdk-users] Round-robin instead of RSS

["Dorsett, Michal" <Michal.Dorsett@verint.com>]

Hmmm... It's taking me a little time to digest... Let me see if I understand (please indicate true/false on the following):

1. If a single queue is used w/o RSS, that queue can be larger than 1M, and the device would be able to handle it.
2. Are you suggesting moving mbufs from a private ring buffer I maintain to the device by dumping them into the TX queue? How is that done? Is there a DPDK example for this?

I may have additional questions. Thank you very much for your response!

Michal


-----Original Message-----
From: Stephen Hemminger [mailto:stephen@networkplumber.org]
Sent: Thursday, December 07, 2017 1:05 AM
To: Dorsett, Michal <Michal.Dorsett@verint.com>
Cc: users@dpdk.org; Maimon, Royi <Royi.Maimon@verint.com>; Heijmans, Merav <Merav.Heijmans@verint.com>
Subject: Re: [dpdk-users] Round-robin instead of RSS

On Wed, 6 Dec 2017 06:43:02 +0000
"Dorsett, Michal" <Michal.Dorsett@verint.com> wrote:

> I think my wording was not clear enough:
>
> Every packet that enters through the device will be delayed by our application for 1 second.
> Given 10Gbps worth of traffic, for example, at an average packet size of 600 bytes, this is roughly 2M packets per second.
>
> A 710-series NIC makes use of 1M mbufs in a queue at the very most. In order for us to delay 2M packets, we need to create several queues per NIC.
> I understand RSS is in the hardware, but hardware can be programmed, too, and hopefully turned off - and that's my question - whether, in addition to the RSS there is a round-robin policy that can be configured.
>
> Thanks,
>
> Michal

What I was suggesting is keep an internal ring buffer of packets.
Use a timer (rte_timer) to move the packets from ring buffer to device.
If you poll timer at 1000 hz, that would only be 2000 packets per interval.
The hardware queue can handle that.

RSS only matters on receive. You can dump any packet in any Tx queue.

On receive hardware supports:
        * all packets on single queue
        * packets spread across multiple queues by hash (RSS)
        * packets directed to queue based on flow (a.ka. Flow Director).




This electronic message may contain proprietary and confidential information of Verint Systems Inc., its affiliates and/or subsidiaries. The information is intended to be for the use of the individual(s) or entity(ies) named above. If you are not the intended recipient (or authorized to receive this e-mail for the intended recipient), you may not use, copy, disclose or distribute to anyone this message or any information contained in this message. If you have received this electronic message in error, please notify us by replying to this e-mail.