Re: [dpdk-users] Using Realtek NIC with DPDK

Re: [dpdk-users] Using Realtek NIC with DPDK

[曾懷恩]

There is no any other way that using DPDK unsupported NIC

You can find supported NICs in following link: 
http://core.dpdk.org/supported/

The easiest way is using VMWare or Virtualbox virtualized NIC in guest OS


> From: Gadre Nayan <gadrenayan@gmail.com>
> To: users@dpdk.org
> Subject: [dpdk-users] Using Realtek NIC with DPDK
> Message-ID:
>    <CAKJ7aR5HMH7rt7FxA3HA5zX0CeQJi_WY_svjLHqj+q5Jf+UNSQ@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
> 
> Hi DPDK Users,
> 
> I have the following NIC on my DELL Laptop running Ubuntu OS
> 
> 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
>    LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> 
> I have 1 socket, 2 cores per socket and Hyperthreaded (2 logical cores per Core)
> 
> Since DPDK doesn't support Realtek NICs, is there a way around ?
> 
> I was also referring to the mailing list and found a similar discussion:
> http://mails.dpdk.org/archives/dev/2014-February/001384.html
> 
> I couldn't find a sample application which uses the software based
> PMDs to be treated as physical NICs.
> 
> Thanks
> ngadre.
> 
> 
> End of users Digest, Vol 202, Issue 6
> *************************************

Re: [dpdk-users] Using Realtek NIC with DPDK

[Jim Thompson]

You could write a PMD for the Realtek nic(s) of interest.   There is netmap support for some Realtek NICs, so it’s not likely to be impossible. 

https://github.com/luigirizzo/netmap/blob/master/sys/dev/netmap/if_re_netmap.h

> On Sep 15, 2019, at 11:13 AM, 曾懷恩 <the@csie.io> wrote:
> 
> 
> There is no any other way that using DPDK unsupported NIC
> 
> You can find supported NICs in following link: 
> http://core.dpdk.org/supported/
> 
> The easiest way is using VMWare or Virtualbox virtualized NIC in guest OS
> 
> 
>> From: Gadre Nayan <gadrenayan@gmail.com>
>> To: users@dpdk.org
>> Subject: [dpdk-users] Using Realtek NIC with DPDK
>> Message-ID:
>>   <CAKJ7aR5HMH7rt7FxA3HA5zX0CeQJi_WY_svjLHqj+q5Jf+UNSQ@mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>> 
>> Hi DPDK Users,
>> 
>> I have the following NIC on my DELL Laptop running Ubuntu OS
>> 
>> 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
>>   LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
>> DLActive- BWMgmt- ABWMgmt-
>> 
>> I have 1 socket, 2 cores per socket and Hyperthreaded (2 logical cores per Core)
>> 
>> Since DPDK doesn't support Realtek NICs, is there a way around ?
>> 
>> I was also referring to the mailing list and found a similar discussion:
>> http://mails.dpdk.org/archives/dev/2014-February/001384.html
>> 
>> I couldn't find a sample application which uses the software based
>> PMDs to be treated as physical NICs.
>> 
>> Thanks
>> ngadre.
>> 
>> 
>> End of users Digest, Vol 202, Issue 6
>> *************************************

Re: [dpdk-users] Using Realtek NIC with DPDK

[Gadre Nayan]

I am getting following error with my ip_pipeline application Need help:

./build/ip_pipeline -f ./config/ip_firewall.cfg

Not provided any port mask as I am not using any DPDK compatible NICS,
so disabled ports

[APP] Initializing CPU core map ...
PANIC in app_init_core_map():
Cannot create CPU core map
6: [./build/ip_pipeline(_start+0x29) [0x42cf79]]
5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0) [0x7feeb0c1e830]]
4: [./build/ip_pipeline(main+0x55) [0x42b375]]
3: [./build/ip_pipeline(app_init+0x12ff) [0x43a18f]]
2: [./build/ip_pipeline(__rte_panic+0xd6) [0x42a3ba]]
1: [./build/ip_pipeline(rte_dump_stack+0x29) [0x4b7779]]
Aborted (core dumped)

The config file used is:
[EAL]
log_level = 9

[PIPELINE0]
type = MASTER
core = 0

[PIPELINE1]
type = INGRESS
core = 1
pktq_out = SWQ0

[PIPELINE2]
type = FIREWALL
core = 2
pktq_in = SWQ0
pktq_out = SWQ1
n_rules = 1024
pkt_type = ipv4

[PIPELINE3]
type = EGRESS
core = 3
pktq_in = SWQ1

I changed the hard-coded values of the below call to suit the "lscpu" output.
app->core_map = cpu_core_map_init(1, 2, 2, 0);

Since I have 1 socket, 2 core per socket and 2 threads per core.
Anything I am missing

On Fri, Sep 6, 2019 at 10:55 AM Gadre Nayan <gadrenayan@gmail.com> wrote:
>
> Hi DPDK Users,
>
> I have the following NIC on my DELL Laptop running Ubuntu OS
>
> 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
>     LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>
> I have 1 socket, 2 cores per socket and Hyperthreaded (2 logical cores per Core)
>
> Since DPDK doesn't support Realtek NICs, is there a way around ?
>
> I was also referring to the mailing list and found a similar discussion:
> http://mails.dpdk.org/archives/dev/2014-February/001384.html
>
> I couldn't find a sample application which uses the software based
> PMDs to be treated as physical NICs.
>
> Thanks
> ngadre.

[dpdk-users] Using Realtek NIC with DPDK

[Gadre Nayan]

Hi DPDK Users,

I have the following NIC on my DELL Laptop running Ubuntu OS

07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
    LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

I have 1 socket, 2 cores per socket and Hyperthreaded (2 logical cores per Core)

Since DPDK doesn't support Realtek NICs, is there a way around ?

I was also referring to the mailing list and found a similar discussion:
http://mails.dpdk.org/archives/dev/2014-February/001384.html

I couldn't find a sample application which uses the software based
PMDs to be treated as physical NICs.

Thanks
ngadre.