* [dpdk-users] CX4 Lx + DPDK 20.02 + SLES15SP1
[not found] ` <MA1PR0101MB1959BC58823AC17D9990F8A1D4FA0@MA1PR0101MB1959.INDPRD01.PROD.OUTLOOK.COM>
@ 2020-03-13 14:34 ` Lili Deng
0 siblings, 0 replies; only message in thread
From: Lili Deng @ 2020-03-13 14:34 UTC (permalink / raw)
To: users
Hello,
I use latest dpdk + Mellanox CX4 on SLES 15 SP1, load module mlx5_ib.
lspci
8cdc:00:02.0 Ethernet controller: Mellanox Technologies MT27710 Family [ConnectX-4 Lx Virtual Function] (rev 80)
d47a:00:02.0 Ethernet controller: Mellanox Technologies MT27710 Family [ConnectX-4 Lx Virtual Function] (rev 80)
Run below command, hit issue - Failed to query QP using DevX
I upgrade rdma-core version (22.5) to a higher version (27.0) from their repository, no lucky.
Could you give me some advice here? Appreciate your help!
./build/build/app/test-pmd/testpmd -l 0-1 -w d47a:00:02.0 -- --i
EAL: Detected 8 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: PCI device d47a:00:02.0 on NUMA socket 0
EAL: probe driver: 15b3:1016 net_mlx5
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 0)
common_mlx5: mlx5_devx_cmds.c:581: mlx5_devx_cmd_qp_query_tis_td(): Failed to query QP using DevX
net_mlx5: mlx5_txq.c:754: mlx5_txq_obj_new(): Fail to query port 0 Tx queue 0 QP TIS transport domain
PANIC in mlx5_txq_obj_new():
line 788 assert "(mlx5_glue->destroy_cq(tmpl.cq)) == 0" failed
9: [./build/build/app/test-pmd/testpmd(_start+0x2a) [0x6c227a]]
8: [/lib64/libc.so.6(__libc_start_main+0xea) [0x7f1d2abaf34a]]
7: [./build/build/app/test-pmd/testpmd(main+0x612) [0x4ee982]]
6: [./build/build/app/test-pmd/testpmd(start_port+0x3e9) [0x6c6519]]
5: [./build/build/app/test-pmd/testpmd(rte_eth_dev_start+0x178) [0x7f27a8]]
4: [./build/build/app/test-pmd/testpmd(mlx5_dev_start+0xed) [0xc1443d]]
3: [./build/build/app/test-pmd/testpmd(mlx5_txq_obj_new+0xad1) [0xba2cd1]]
2: [./build/build/app/test-pmd/testpmd(__rte_panic+0xb8) [0x4dec12]]
1: [./build/build/app/test-pmd/testpmd(rte_dump_stack+0x16) [0x83d196]]
Aborted (core dumped)
ibv_devinfo
hca_id: mlx5_0
transport: InfiniBand (0)
fw_ver: 14.25.8100
node_guid: 000d:3aff:fef9:7f37
sys_image_guid: 0000:0000:0000:0000
vendor_id: 0x02c9
vendor_part_id: 4118
hw_ver: 0x80
board_id: MSF0010110035
phys_port_cnt: 1
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 1024 (3)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: Ethernet
hca_id: mlx5_1
transport: InfiniBand (0)
fw_ver: 14.25.8100
node_guid: 000d:3aff:fef9:9e5a
sys_image_guid: 0000:0000:0000:0000
vendor_id: 0x02c9
vendor_part_id: 4118
hw_ver: 0x80
board_id: MSF0010110035
phys_port_cnt: 1
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 1024 (3)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: Ethernet
Thanks,
Lili
^ permalink raw reply [flat|nested] only message in thread