Re: [dpdk-users] 答?: igb_uio.ko is not generated via make/dpdk-setup.sh

["Trahe, Fiona" <fiona.trahe@intel.com>]

Good that it's resolved, I learned the hard way too and got caught out by it.
But I just checked and it is mentioned in the release notes - I guess we should have read them 😊
http://doc.dpdk.org/guides/rel_notes/release_20_02.html


> -----Original Message-----
> From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
> Sent: Monday, April 20, 2020 11:03 AM
> To: Trahe, Fiona <fiona.trahe@intel.com>
> Cc: 宋捷 <songj@zctt.com>; users@dpdk.org
> Subject: Re: [dpdk-users] 答?: igb_uio.ko is not generated via make/dpdk-setup.sh
> 
> Hello Fiona,
> 
> Thanks for your response.
> In short,
> you are absolutely correct! Thanks!
> 
> When I changed the config and re-compile DPDK, IGB_UIO genereated.
> However no documents about this default behavior change.
> 
> In my opinion, it may be "kind" if such change is clearly documented.
> 
> BR,
> Hideyuki Yamashita
> NTT TechnoCross
> 
> > Hi
> >
> > Have you tried setting CONFIG_RTE_EAL_IGB_UIO=y in the config file.
> > The default has changed from y to n in some recent release.
> > as it is more advisable to use vfio-pci instead.
> >
> > Fiona
> >
> > > -----Original Message-----
> > > From: users <users-bounces@dpdk.org> On Behalf Of Hideyuki Yamashita
> > > Sent: Friday, April 17, 2020 9:02 AM
> > > To: 宋捷 <songj@zctt.com>
> > > Cc: users@dpdk.org
> > > Subject: Re: [dpdk-users] 答?: igb_uio.ko is not generated via make/dpdk-setup.sh
> > >
> > > Hello Songi,
> > >
> > > Thanks for your checking the issue.
> > >
> > > I think that considering that two person encountered the same issue,
> > > it looks that it is not coincident.
> > > It is highly possible that there is some problem with building "make"
> > > system.
> > >
> > > If I deeply look into make file, I can fix my problem.
> > > But I am not good at looking/analyzing make file.
> > >
> > > So DPDK experts,
> > > I need, we need some explanation or fix for this isssue!
> > >
> > > Thanks for your help.
> > >
> > > BR,
> > > Hideyuki Yamashita
> > > NTT TechnoCross
> > >
> > > > I get the same issue」ャ
> > > > I build DPDK 20.02 with "make install T=x86_64-native-linuxapp-gcc", there
> > > > is not kmod folder under x86_64-native-linuxapp-gcc.
> > > > So I have to copy kmod from dpdk-stable-19.11.1 into DPDK 20.02, the igb_uio
> > > > source code is same between these two version.
> > > >
> > > >
> > > >
> > > >
> > > > -----モハシ?ヤュシ?-----
> > > > キ「シ?ネヒ: users [mailto:users-bounces@dpdk.org] エ〓・Hideyuki Yamashita
> > > > キ「ヒヘハアシ Friday, April 17, 2020 2:18 PM
> > > > ハユシ?ネヒ: users@dpdk.org; Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
> > > > ヨ〓 Re: [dpdk-users] igb_uio.ko is not generated via make/dpdk-setup.sh
> > > >
> > > > Hello Experts,
> > > >
> > > > Can anybody help me out?
> > > >
> > > > BR,
> > > > Hideyuki Yamashita
> > > > NTT TechnoCross
> > > >
> > > > > Hello,
> > > > >
> > > > > I have problem with dpdk-20.02 when compiling.
> > > > >
> > > > > [1. What is the problem]
> > > > > igb_uio.ko is not generated under build/kmod/ directory thus I can not
> > > > > load/bind NIC with igb_uio.
> > > > >
> > > > > [2.Which platform]
> > > > > x86_64
> > > > > Ubuntu 18.04.04 LTS
> > > > >
> > > > > [3.Which build target]
> > > > > x86_64-native-linux-gcc
> > > > > x86_64-native-linuxapp-gcc
> > > > >
> > > > > I used dpdk-20.02 tarball which can be downloaded via website.
> > > > >
> > > > > [4.How I compiled source]
> > > > > I tried the follwoing two ways but both failed to generate igb_uio
> > > > > module.
> > > > >
> > > > > 4a
> > > > > #sudo make install T=x86_64-native-linuxapp-gcc #sudo make install
> > > > > T=x86_64-native-linux-gcc
> > > > >
> > > > > 4b
> > > > > [for 19.11]
> > > > > [38] x86_64-native-linuxapp-gcc
> > > > > [45] Insert IGB UIO module
> > > > > [50] Display current Ethernet/Baseband/Crypto device settings
> > > > >
> > > > > All successful
> > > > >
> > > > > [for 20.02]
> > > > > [41] x86_64-native-linux-gcc
> > > > > [45] Insert IGB UIO module
> > > > >
> > > > > Option: 45
> > > > >
> > > > > ## ERROR: Target does not have the DPDK UIO Kernel Module.
> > > > >        To fix, please try to rebuild target.
> > > > >
> > > > > [for 20.02]
> > > > > [38] x86_64-native-linuxapp-gcc
> > > > > [45] Insert IGB UIO module
> > > > >
> > > > > Option: 45
> > > > >
> > > > > ## ERROR: Target does not have the DPDK UIO Kernel Module.
> > > > >        To fix, please try to rebuild target.
> > > > >
> > > > > With regard to 19.11, using usertools/dpdk-setup.sh perfectly worked.
> > > > > However something looks wrong with 20.02.
> > > > > I've heard that building system is moving from "make"
> > > > > to "meason". But following the official document "make" is still
> > > > > supported. So for me it is very odd.
> > > > >
> > > > >
> > > > > Thanks in advance!
> > > > >
> > > > > BR,
> > > > > Hideyuki Yamashita
> > > > > NTT TechnoCross
> > > >
> > > >
> > > >
> > > >
> > >
>