From: "M R, Chengappa (Network Function Virtualization)" <cm-r@hpe.com>
To: "Rosen, Rami" <rami.rosen@intel.com>, "users@dpdk.org" <users@dpdk.org>
Subject: Re: [dpdk-users] DPDK Test Suite failing with PREREQ EXCEPTION Traceback
Date: Fri, 27 Apr 2018 06:04:25 +0000 [thread overview]
Message-ID: <TU4PR8401MB06543166B1E6D2CEC6BEA93B998D0@TU4PR8401MB0654.NAMPRD84.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <9B0331B6EBBD0E4684FBFAEDA55776F958A0CE18@HASMSX110.ger.corp.intel.com>
Hi Rosen / Team,
I cross checked on the pre-requisite package and I see that the following packages are installed on both TESTER and TARGET DUT
* dnf install tcl
* dnf install python-xlwt
* dnf install python-pexpect
* dnf install numpy
* dnf install python-docutils
* dnf install pcapy
* dnf install python-xlrd
* dnf install scapy
Apart from these, if there are any missing packages to be installed kindly do let me know so that I can have them installed too.
Awaiting for your response, patiently.
Thanks & Regards,
Chengappa
-----Original Message-----
From: M R, Chengappa (Network Function Virtualization)
Sent: Friday, April 27, 2018 8:41 AM
To: 'Rosen, Rami' <rami.rosen@intel.com>; users@dpdk.org
Subject: RE: DPDK Test Suite failing with PREREQ EXCEPTION Traceback
Hi Rosen,
Many thanks for acknowledging the issue addressed in the mail.
Yes I have taken care and made sure that all the required packages are installed.
However, let me go thru the link you have shared cross check the list of system requirements and get back to you.
Best Regards,
Chengappa
-----Original Message-----
From: Rosen, Rami [mailto:rami.rosen@intel.com]
Sent: Friday, April 27, 2018 8:16 AM
To: M R, Chengappa (Network Function Virtualization) <cm-r@hpe.com<mailto:cm-r@hpe.com>>; users@dpdk.org<mailto:users@dpdk.org>
Subject: RE: DPDK Test Suite failing with PREREQ EXCEPTION Traceback
Hi,
The exception you got typically happens when a package is not installed on the host.
Did you install all the packages which appear in the System Requirements section of the DTS gsg ? (like python-xlwt, python-pexpect and the others) ? see:
See: http://dpdk.org/doc/dts/gsg/sys_reqs.html
In case this won't help, I would suggest to ask in the DTS mailing list, dts@dpdk.org<mailto:dts@dpdk.org>.
Regards,
Rami Rosen
-----Original Message-----
From: users [mailto:users-bounces@dpdk.org] On Behalf Of M R, Chengappa (Network Function Virtualization)
Sent: Thursday, April 26, 2018 13:04
To: users@dpdk.org<mailto:users@dpdk.org>
Cc: M R, Chengappa (Network Function Virtualization) <cm-r@hpe.com<mailto:cm-r@hpe.com>>
Subject: [dpdk-users] DPDK Test Suite failing with PREREQ EXCEPTION Traceback
Importance: High
Greetings Team,
I am attempting to execute dpdk test-suite but am facing the below error PREREQ EXCEPTION Traceback
[root@tester dts]# ./dts --config-file executions/execution.cfg
dts:
DUT 10.70.2.6
tester: ssh root@10.70.2.5<mailto:root@10.70.2.5<mailto:root@10.70.2.5%3cmailto:root@10.70.2.5>>
tester: ssh root@10.70.2.5<mailto:root@10.70.2.5<mailto:root@10.70.2.5%3cmailto:root@10.70.2.5>>
dut.10.70.2.6: ssh root@10.70.2.6<mailto:root@10.70.2.6<mailto:root@10.70.2.6%3cmailto:root@10.70.2.6>>
dut.10.70.2.6: ssh root@10.70.2.6<mailto:root@10.70.2.6<mailto:root@10.70.2.6%3cmailto:root@10.70.2.6>>
dts: CACHE: Cache will not be read.
dts: SKIP: The DPDK setup steps will be executed.
tester: sed -i '/10.70.2.6/d' ~/.ssh/known_hosts
tester: killall scapy 2>/dev/null; echo tester
tester: awk '/Hugepagesize/ {print $2}' /proc/meminfo
tester: umount `awk '/hugetlbfs/ { print $2 }' /proc/mounts`
tester: awk '/hugetlbfs/ { print $2 }' /proc/mounts
tester: mkdir -p /mnt/huge
tester: mount -t hugetlbfs nodev /mnt/huge
tester: awk '/Hugepagesize/ {print $2}' /proc/meminfo
tester: echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
tester: scp -v dep/tgen.tgz root@10.70.2.5:~/<mailto:root@10.70.2.5:~/<mailto:root@10.70.2.5:~/%3cmailto:root@10.70.2.5:~/>>
tester: scp -v dep/tclclient.tgz root@10.70.2.5:~/<mailto:root@10.70.2.5:~/<mailto:root@10.70.2.5:~/%3cmailto:root@10.70.2.5:~/>>
tester: tar zxf tgen.tgz
tester: tar zxf tclclient.tgz
tester: modprobe uio
tester: Core0 bypassed
tester: modprobe igb
tester: modprobe ixgbe
tester: modprobe e1000e
tester: modprobe e1000
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device
tester: ifconfig eno49 up
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device
tester: ifconfig eno50 up
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device
tester: ifconfig ens2f0 up
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device
tester: ifconfig ens2f1 up
tester: Tester: [0000:04:00.0 10df:0720] unknow_nic
tester: Tester: [0000:04:00.1 10df:0720] unknow_nic
tester: Tester: [0000:05:00.0 8086:10fb] ens2f0
tester: Tester: [0000:05:00.1 8086:10fb] ens2f1
tester: {'intf': 'ens2f0', 'mac': '14:02:ec:74:2b:ec', 'pci': '0000:05:00.0', 'ipv4': '10.70.12.5', 'ipv6': 'fe80::1602:ecff:fe74:2bec', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7f7976c99790>}
tester: {'intf': 'ens2f1', 'mac': '14:02:ec:74:2b:ed', 'pci': '0000:05:00.1', 'ipv4': '10.70.3.5', 'ipv6': 'fe80::1602:ecff:fe74:2bed', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7f7976c99650>}
dts: PREREQ EXCEPTION Traceback (most recent call last):
File "/root/dts/framework/dts.py", line 341, in dts_run_prerequisties
dutobj.prerequisites()
File "/root/dts/framework/project_dpdk.py", line 326, in prerequisites
self.prepare_package()
File "/root/dts/framework/project_dpdk.py", line 273, in prepare_package
assert (os.path.isfile(self.package) is True), "Invalid package"
AssertionError: Invalid package
dts: CACHE: Discarding cache.
dts: DTS ended
The current running configuration in our set-up is as follows:
[root@tester dts]# cat conf/ports.cfg
# DUT Port Configuration
# [DUT IP]
# ports=
# pci=Pci BDF,intf=Kernel interface;
# pci=Pci BDF,mac=Mac address,peer=Tester Pci BDF,numa=Port Numa
# pci=Pci BDF,peer=IXIA:card.port
# pci=Pci BDF,peer=Tester Pci BDF,tp_ip=$(IP),tp_path=$({PERL_PATH);
# pci=Pci BDF,peer=Tester Pci BDF,sec_port=yes,first_port=Pci BDF;
# [VM NAME] virtual machine name; This section is for virutal scenario # ports =
# dev_idx=device index of ports info, peer=Tester Pci BDF
[10.70.2.6]
ports =
pci=05:00.0,intf=ens2f0;
pci=05:00.1,intf=ens2f1;
[root@tester dts]# cat executions/execution.cfg [Execution1]
crbs=10.70.2.6
drivername=igb_uio
test_suites=hello_world
test_suites=
cmdline,
hello_world
targets=x86_64-native-linuxapp-gcc
parameters=nic_type=niantic:func=true
[root@tester dts]# cat conf/crbs.cfg
#DUT crbs Configuration
#[DUT IP]
# dut_ip: DUT ip address
# dut_user: Login DUT username
# dut_passwd: Login DUT password
# os: operation system type linux or freebsd # tester_ip: Tester ip address # tester_passwd: Tester password # ixia_group: IXIA group name # channels: Board channel number # bypass_core0: Whether by pass core0 [10.70.2.6]
dut_ip=10.70.2.6
dut_user=root
dut_passwd=HP1nvent
os=fedora
tester_ip=10.70.2.5
tester_passwd=HP1nvent
channels=4
It would be helpful if anyone could guide me with the correct pointers to go over this issue and help me advance further.
Thanking in advance
Chengappa
If everyone is moving forward together, then success takes care of itself....!!
prev parent reply other threads:[~2018-04-27 6:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-26 10:04 M R, Chengappa (Network Function Virtualization)
2018-04-27 2:45 ` Rosen, Rami
2018-04-27 3:11 ` M R, Chengappa (Network Function Virtualization)
2018-04-27 6:04 ` M R, Chengappa (Network Function Virtualization) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=TU4PR8401MB06543166B1E6D2CEC6BEA93B998D0@TU4PR8401MB0654.NAMPRD84.PROD.OUTLOOK.COM \
--to=cm-r@hpe.com \
--cc=rami.rosen@intel.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).