From: "Martin Drašar" <drasar@ics.muni.cz>
To: "Rosen, Rami" <rami.rosen@intel.com>, "users@dpdk.org" <users@dpdk.org>
Subject: Re: [dpdk-users] DPDK 17.05 does not find X510 card
Date: Tue, 19 Jun 2018 11:57:03 +0200 [thread overview]
Message-ID: <a7c3d2f0-ba4b-cc0e-0ada-5c0c7140f503@ics.muni.cz> (raw)
In-Reply-To: <9B0331B6EBBD0E4684FBFAEDA55776F9672CBC5E@HASMSX110.ger.corp.intel.com>
Dne 19.6.2018 v 2:21 Rosen, Rami napsal(a):
> Hi Martin,
> I assume that you get the mmap() error that you posted earlier when
> running your own DPDK application. And again, if this is the case, can
> you please post here
> the full log you get when running testpmd with --log-level=8 and -w I40E0_PCI_BUS_ID .... (without running any other DPDK application). This may give a direction to solving the issue. Also please post
> here the exact command you use to launch testpmd.
>
> Regards,
> Rami Rosen
Hi,
I am atttaching the testpmd output. There is not much else than what I
posted earlier. I am launching the testpmd as you instructed:
sudo ./testpmd --log-level=8 -w 0000:04:00.0 -w 0000:04:00.1 -w
0000:05:00.0 -w 0000:05:00.1
I have also swapped the 05:00 card for X520. So, now the system has one
X710 and one X520 using different drivers, but the situation is the same.
This system has the secure boot on, so I guess it may be the culprit,
because the same application is working with the same cards on an
unrestricted system. However, the only advice I found so far regarding
the 'iomem=relaxed' did not help, so I have currently no idea how to
proceed.
Thank you for any advice.
Martin
-------------- next part --------------
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 1
EAL: Detected lcore 2 as core 1 on socket 0
EAL: Detected lcore 3 as core 1 on socket 1
EAL: Detected lcore 4 as core 2 on socket 0
EAL: Detected lcore 5 as core 2 on socket 1
EAL: Detected lcore 6 as core 3 on socket 0
EAL: Detected lcore 7 as core 3 on socket 1
EAL: Detected lcore 8 as core 4 on socket 0
EAL: Detected lcore 9 as core 4 on socket 1
EAL: Detected lcore 10 as core 5 on socket 0
EAL: Detected lcore 11 as core 5 on socket 1
EAL: Detected lcore 12 as core 6 on socket 0
EAL: Detected lcore 13 as core 6 on socket 1
EAL: Detected lcore 14 as core 8 on socket 0
EAL: Detected lcore 15 as core 8 on socket 1
EAL: Detected lcore 16 as core 9 on socket 0
EAL: Detected lcore 17 as core 9 on socket 1
EAL: Detected lcore 18 as core 10 on socket 0
EAL: Detected lcore 19 as core 10 on socket 1
EAL: Detected lcore 20 as core 11 on socket 0
EAL: Detected lcore 21 as core 11 on socket 1
EAL: Detected lcore 22 as core 12 on socket 0
EAL: Detected lcore 23 as core 12 on socket 1
EAL: Detected lcore 24 as core 13 on socket 0
EAL: Detected lcore 25 as core 13 on socket 1
EAL: Detected lcore 26 as core 14 on socket 0
EAL: Detected lcore 27 as core 14 on socket 1
EAL: Detected lcore 28 as core 0 on socket 0
EAL: Detected lcore 29 as core 0 on socket 1
EAL: Detected lcore 30 as core 1 on socket 0
EAL: Detected lcore 31 as core 1 on socket 1
EAL: Detected lcore 32 as core 2 on socket 0
EAL: Detected lcore 33 as core 2 on socket 1
EAL: Detected lcore 34 as core 3 on socket 0
EAL: Detected lcore 35 as core 3 on socket 1
EAL: Detected lcore 36 as core 4 on socket 0
EAL: Detected lcore 37 as core 4 on socket 1
EAL: Detected lcore 38 as core 5 on socket 0
EAL: Detected lcore 39 as core 5 on socket 1
EAL: Detected lcore 40 as core 6 on socket 0
EAL: Detected lcore 41 as core 6 on socket 1
EAL: Detected lcore 42 as core 8 on socket 0
EAL: Detected lcore 43 as core 8 on socket 1
EAL: Detected lcore 44 as core 9 on socket 0
EAL: Detected lcore 45 as core 9 on socket 1
EAL: Detected lcore 46 as core 10 on socket 0
EAL: Detected lcore 47 as core 10 on socket 1
EAL: Detected lcore 48 as core 11 on socket 0
EAL: Detected lcore 49 as core 11 on socket 1
EAL: Detected lcore 50 as core 12 on socket 0
EAL: Detected lcore 51 as core 12 on socket 1
EAL: Detected lcore 52 as core 13 on socket 0
EAL: Detected lcore 53 as core 13 on socket 1
EAL: Detected lcore 54 as core 14 on socket 0
EAL: Detected lcore 55 as core 14 on socket 1
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 56 lcore(s)
EAL: Probing VFIO support...
EAL: Module /sys/module/vfio_pci not found! error 2 (No such file or directory)
EAL: VFIO modules not loaded, skipping VFIO support...
EAL: Module /sys/module/vfio_pci not found! error 2 (No such file or directory)
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0xe00000000 bytes
EAL: Virtual area found at 0x7fb000000000 (size = 0xe00000000)
EAL: Ask a virtual area of 0xe00000000 bytes
EAL: Virtual area found at 0x7fa1c0000000 (size = 0xe00000000)
EAL: Requesting 56 pages of size 1024MB from socket 0
EAL: Requesting 56 pages of size 1024MB from socket 1
EAL: TSC frequency is ~1997675 KHz
EAL: Master lcore 0 is ready (tid=c335940;cpuset=[0])
EAL: lcore 8 is ready (tid=715f700;cpuset=[8])
EAL: lcore 12 is ready (tid=515b700;cpuset=[12])
EAL: lcore 22 is ready (tid=fffff700;cpuset=[22])
EAL: lcore 38 is ready (tid=f7fef700;cpuset=[38])
EAL: lcore 34 is ready (tid=f9ff3700;cpuset=[34])
EAL: lcore 10 is ready (tid=615d700;cpuset=[10])
EAL: lcore 6 is ready (tid=8161700;cpuset=[6])
EAL: lcore 30 is ready (tid=fbff7700;cpuset=[30])
EAL: lcore 54 is ready (tid=effdf700;cpuset=[54])
EAL: lcore 18 is ready (tid=2155700;cpuset=[18])
EAL: lcore 28 is ready (tid=fcff9700;cpuset=[28])
EAL: lcore 50 is ready (tid=f1fe3700;cpuset=[50])
EAL: lcore 26 is ready (tid=fdffb700;cpuset=[26])
EAL: lcore 46 is ready (tid=f3fe7700;cpuset=[46])
EAL: lcore 16 is ready (tid=3157700;cpuset=[16])
EAL: lcore 52 is ready (tid=f0fe1700;cpuset=[52])
EAL: lcore 14 is ready (tid=4159700;cpuset=[14])
EAL: lcore 7 is ready (tid=7960700;cpuset=[7])
EAL: lcore 49 is ready (tid=f27e4700;cpuset=[49])
EAL: lcore 31 is ready (tid=fb7f6700;cpuset=[31])
EAL: lcore 3 is ready (tid=9964700;cpuset=[3])
EAL: lcore 32 is ready (tid=faff5700;cpuset=[32])
EAL: lcore 11 is ready (tid=595c700;cpuset=[11])
EAL: lcore 40 is ready (tid=f6fed700;cpuset=[40])
EAL: lcore 4 is ready (tid=9163700;cpuset=[4])
EAL: lcore 9 is ready (tid=695e700;cpuset=[9])
EAL: lcore 24 is ready (tid=feffd700;cpuset=[24])
EAL: lcore 37 is ready (tid=f87f0700;cpuset=[37])
EAL: lcore 1 is ready (tid=a966700;cpuset=[1])
EAL: lcore 47 is ready (tid=f37e6700;cpuset=[47])
EAL: lcore 45 is ready (tid=f47e8700;cpuset=[45])
EAL: lcore 21 is ready (tid=952700;cpuset=[21])
EAL: lcore 29 is ready (tid=fc7f8700;cpuset=[29])
EAL: lcore 35 is ready (tid=f97f2700;cpuset=[35])
EAL: lcore 5 is ready (tid=8962700;cpuset=[5])
EAL: lcore 53 is ready (tid=f07e0700;cpuset=[53])
EAL: lcore 51 is ready (tid=f17e2700;cpuset=[51])
EAL: lcore 2 is ready (tid=a165700;cpuset=[2])
EAL: lcore 44 is ready (tid=f4fe9700;cpuset=[44])
EAL: lcore 20 is ready (tid=1153700;cpuset=[20])
EAL: lcore 33 is ready (tid=fa7f4700;cpuset=[33])
EAL: lcore 13 is ready (tid=495a700;cpuset=[13])
EAL: lcore 39 is ready (tid=f77ee700;cpuset=[39])
EAL: lcore 43 is ready (tid=f57ea700;cpuset=[43])
EAL: lcore 42 is ready (tid=f5feb700;cpuset=[42])
EAL: lcore 55 is ready (tid=ef7de700;cpuset=[55])
EAL: lcore 48 is ready (tid=f2fe5700;cpuset=[48])
EAL: lcore 27 is ready (tid=fd7fa700;cpuset=[27])
EAL: lcore 36 is ready (tid=f8ff1700;cpuset=[36])
EAL: lcore 25 is ready (tid=fe7fc700;cpuset=[25])
EAL: lcore 23 is ready (tid=ff7fe700;cpuset=[23])
EAL: lcore 15 is ready (tid=3958700;cpuset=[15])
EAL: lcore 41 is ready (tid=f67ec700;cpuset=[41])
EAL: lcore 17 is ready (tid=2956700;cpuset=[17])
EAL: lcore 19 is ready (tid=1954700;cpuset=[19])
EAL: Driver (net_ark) doesn't match the device
EAL: Driver (net_avp) doesn't match the device
EAL: Driver (net_bnxt) doesn't match the device
EAL: Driver (net_cxgbe) doesn't match the device
EAL: Driver (net_e1000_igb) doesn't match the device
EAL: Driver (net_e1000_igb_vf) doesn't match the device
EAL: Driver (net_e1000_em) doesn't match the device
EAL: Driver (net_ena) doesn't match the device
EAL: Driver (net_enic) doesn't match the device
EAL: Driver (net_fm10k) doesn't match the device
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: pci_map_resource(): cannot mmap(231, 0x7fbe00000000, 0x1000000, 0x0): Operation not permitted (0xffffffffffffffff)
EAL: Requested device 0000:04:00.0 cannot be used
EAL: Driver (net_ark) doesn't match the device
EAL: Driver (net_avp) doesn't match the device
EAL: Driver (net_bnxt) doesn't match the device
EAL: Driver (net_cxgbe) doesn't match the device
EAL: Driver (net_e1000_igb) doesn't match the device
EAL: Driver (net_e1000_igb_vf) doesn't match the device
EAL: Driver (net_e1000_em) doesn't match the device
EAL: Driver (net_ena) doesn't match the device
EAL: Driver (net_enic) doesn't match the device
EAL: Driver (net_fm10k) doesn't match the device
EAL: PCI device 0000:04:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: pci_map_resource(): cannot mmap(231, 0x7fbe00000000, 0x1000000, 0x0): Operation not permitted (0xffffffffffffffff)
EAL: Requested device 0000:04:00.1 cannot be used
EAL: Driver (net_ark) doesn't match the device
EAL: Driver (net_avp) doesn't match the device
EAL: Driver (net_bnxt) doesn't match the device
EAL: Driver (net_cxgbe) doesn't match the device
EAL: Driver (net_e1000_igb) doesn't match the device
EAL: Driver (net_e1000_igb_vf) doesn't match the device
EAL: Driver (net_e1000_em) doesn't match the device
EAL: Driver (net_ena) doesn't match the device
EAL: Driver (net_enic) doesn't match the device
EAL: Driver (net_fm10k) doesn't match the device
EAL: Driver (net_i40e) doesn't match the device
EAL: Driver (net_i40e_vf) doesn't match the device
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL: probe driver: 8086:154d net_ixgbe
EAL: pci_map_resource(): cannot mmap(231, 0x7fbe00000000, 0x80000, 0x0): Operation not permitted (0xffffffffffffffff)
EAL: Requested device 0000:05:00.0 cannot be used
EAL: Driver (net_ark) doesn't match the device
EAL: Driver (net_avp) doesn't match the device
EAL: Driver (net_bnxt) doesn't match the device
EAL: Driver (net_cxgbe) doesn't match the device
EAL: Driver (net_e1000_igb) doesn't match the device
EAL: Driver (net_e1000_igb_vf) doesn't match the device
EAL: Driver (net_e1000_em) doesn't match the device
EAL: Driver (net_ena) doesn't match the device
EAL: Driver (net_enic) doesn't match the device
EAL: Driver (net_fm10k) doesn't match the device
EAL: Driver (net_i40e) doesn't match the device
EAL: Driver (net_i40e_vf) doesn't match the device
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL: probe driver: 8086:154d net_ixgbe
EAL: pci_map_resource(): cannot mmap(231, 0x7fbe00000000, 0x80000, 0x0): Operation not permitted (0xffffffffffffffff)
EAL: Requested device 0000:05:00.1 cannot be used
EAL: No probed ethernet devices
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=587456, size=2176, socket=0
USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=587456, size=2176, socket=1
Done
No commandline core given, start packet forwarding
io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support enabled, MP over anonymous pages disabled
io packet forwarding - CRC stripping enabled - packets/burst=32
nb forwarding cores=1 - nb forwarding ports=0
RX queues=1 - RX desc=128 - RX free threshold=0
RX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX queues=1 - TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX RS bit threshold=0 - TXQ flags=0x0
Press enter to exit
Telling cores to stop...
Waiting for lcores to finish...
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
Bye...
next prev parent reply other threads:[~2018-06-19 9:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-18 8:55 Martin Drašar
2018-06-18 8:56 ` [dpdk-users] DPDK 17.05 does not find X710 card Martin Drašar
2018-06-18 9:54 ` [dpdk-users] DPDK 17.05 does not find X510 card Rosen, Rami
2018-06-18 12:41 ` Martin Drašar
2018-06-18 13:09 ` Rosen, Rami
2018-06-18 13:23 ` Martin Drašar
2018-06-18 13:34 ` Rosen, Rami
2018-06-18 13:43 ` Martin Drašar
2018-06-18 21:35 ` Martin Drašar
2018-06-19 0:21 ` Rosen, Rami
2018-06-19 9:57 ` Martin Drašar [this message]
2018-06-19 14:12 ` Martin Drašar
2018-06-21 5:58 ` Avi Cohen (A)
2018-06-21 11:02 ` Martin Drašar
2018-06-21 15:07 ` Stephen Hemminger
2018-06-23 13:00 ` Rosen, Rami
2018-06-25 8:23 ` Martin Drašar
2018-06-25 9:35 ` Rosen, Rami
2018-07-11 13:47 ` Martin Drašar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a7c3d2f0-ba4b-cc0e-0ada-5c0c7140f503@ics.muni.cz \
--to=drasar@ics.muni.cz \
--cc=rami.rosen@intel.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).