From: Hitoshi Masutani <masutani.hitoshi@lab.ntt.co.jp>
To: users@dpdk.org
Subject: [dpdk-users] Failed to initialize one specific port of X710-DA4 in i40e pmd
Date: Fri, 23 Mar 2018 14:50:12 +0900 [thread overview]
Message-ID: <b47fbc91-a62d-7496-af6e-f60d32e6414f@lab.ntt.co.jp> (raw)
I am facing a failure of dpdk(16.11.3) initialization with testpmd
using i40e pmd on a specific physical port of X710-DA4.
Without such specific port, testpmd can run successfully.
My server box has two X710-DA4 cards and
these two cards have the same failure.
To clarify whether it is caused by hardware failure or
by the lack of appropriate nic configuration,
the following build options of dpdk are enabled.
--------------
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=y
--------------
My server box spec. is as follows :
CPU : Intel(R) Xeon(R) Gold 6136
MEMORY : 128GB (16G x 8)
Motherboard: SYS-1029U-TR4
NIC1 : I350 x 4 (onboard nic)
NIC2 : XL710 dual
NIC3 : X710-DA4
NIC4 : X710-DA4
------------------------------------------------------------
OS : ubnutu 16.04.3 LTS(linux-image-4.4.0-87-generic)
DPDK : 16.11.3
testpmd's boot message is as follows :
--------------------------------------------
$ sudo ./testpmd -- -i
EAL: Detected 24 lcore(s)
EAL: Probing VFIO support...
EAL: PCI device 0000:18:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:18:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:18:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:18:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:86:00.0 on NUMA socket 1
EAL: probe driver: 8086:1583 net_i40e
EAL: PCI device 0000:86:00.1 on NUMA socket 1
EAL: probe driver: 8086:1583 net_i40e
EAL: PCI device 0000:af:00.0 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
PMD: i40e_set_symmetric_hash_enable_per_port(): Symmetric hash has
already been disabled
PMD: eth_i40e_dev_init(): FW 5.0 API 1.5 NVM 05.00.05 eetrack 80002919
PMD: i40e_update_default_filter_setting(): Cannot remove the default
macvlan filter
PMD: i40e_pf_setup(): i40e_vsi_setup finished
PMD: i40e_pf_setup(): Hardware capability of hash lookup table size: 512
PMD: i40e_update_flow_control(): Link auto negotiation not completed
EAL: PCI device 0000:af:00.1 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:af:00.2 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
PMD: i40e_set_symmetric_hash_enable_per_port(): Symmetric hash has
already been disabled
PMD: eth_i40e_dev_init(): FW 5.0 API 1.5 NVM 05.00.05 eetrack 80002919
PMD: validate_tcmap_parameter(): Enabled TC map 0x80 not applicable to
HW support 0x1
PMD: i40e_vsi_setup(): Failed to update TC bandwidth
PMD: i40e_pf_setup(): Setup of main vsi failed
PMD: eth_i40e_dev_init(): Failed to setup pf switch: -63
rte_eth_dev_pci_probe: driver net_i40e: eth_dev_init(vendor_id=0x8086
device_id=0x1572) failed
EAL: Error - exiting with code: 1
Cause: Requested device 0000:af:00.2 cannot be used
---------------------------
If you have solutions, could you tell me how this problem can be resolved ?
Regards,
Hitoshi
next reply other threads:[~2018-03-23 5:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 5:50 Hitoshi Masutani [this message]
2018-08-23 19:54 Aaron Hughes
2018-08-23 22:25 ` Hitoshi Masutani
2018-08-24 16:55 ` Aaron Hughes
2019-12-20 13:53 ` Ananda Sathyanarayana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b47fbc91-a62d-7496-af6e-f60d32e6414f@lab.ntt.co.jp \
--to=masutani.hitoshi@lab.ntt.co.jp \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).