Re: [dpdk-users] [dpdk-dev] I40e-dpdk_18.11-Bonding issue

["Min Hu (Connor)" <humin29@huawei.com>]

Hi, Nishant,
	could you tell us your complete detailed steps and logs for test ？
	the more detailed the better， thanks.

在 2021/9/18 1:20, Nishant Verma 写道:
> Hi,
> 
> I am stuck with a bonding issue wrt. DPDK 18.11 with X722 ethernet
> controller.
> 
> My system basically creates VF's through SRIOV on top of two PF's. One
> issue I found was if I try to change the MAC address of VF more then once,
> it won't let me do that. Anyway I can live with that but when I am creating
> bond interface on top of 2 VF's. I am getting this error.
> 
> Changed Address:06:00:00:02:b7:21
> FWK: Bond interface net_bonding1 created successfully, id = 2
> 
> *mac_address_slaves_update(1495) - Failed to update port Id 0 MAC address*FWK:
> Adding slave (0) to bond (2)
> mac_address_slaves_update(1495) - Failed to update port Id 0 MAC address
> mac_address_slaves_update(1503) - Failed to update port Id 1 MAC address
> FWK: Adding slave (1) to bond (2)
> mac_address_slaves_update(1495) - Failed to update port Id 0 MAC address
> mac_address_slaves_update(1503) - Failed to update port Id 1 MAC address
> EAL: Error - exiting with code: 1
>    Cause: rte_eth_dev_start: err=-1, port=2
> 
> I checked a whole lot of patches but everything seems to be in place in
> this release. What else can I try to get rid of these errors?
> 
> Thanks.
> 
> Regards,
> Nishant Verma
> .
>