* [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic
@ 2020-06-17 9:22 Licj
2020-06-17 14:16 ` Nishant Verma
2020-06-17 15:00 ` Stephen Hemminger
0 siblings, 2 replies; 5+ messages in thread
From: Licj @ 2020-06-17 9:22 UTC (permalink / raw)
To: USERS
Hi all,
I have run dpdk testpmd successfully with Mellanox MCX454A-FCAT nic(mlx5 driver). I can capture the dpdk packets on the recv side using tcpdump. But the througput does not reach line rate(24gbps throughput with 40gbps line rate).
Then I want to capture packets on the send side using dpdk-pdump. But the dpdk-pdump failed with error "No Ethernet ports - bye".
The initial info with dpdk-pdump shows that it only probes ixgbe driver and 2 Intel nics But not Mellanox nic.
Anyone knows why and how to solve it? Thank you.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic
2020-06-17 9:22 [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic Licj
@ 2020-06-17 14:16 ` Nishant Verma
2020-06-17 15:00 ` Stephen Hemminger
1 sibling, 0 replies; 5+ messages in thread
From: Nishant Verma @ 2020-06-17 14:16 UTC (permalink / raw)
To: Licj; +Cc: USERS
On Wed, Jun 17, 2020 at 5:22 AM Licj <272465698@qq.com> wrote:
> Hi all,
>
> I have run dpdk testpmd successfully with Mellanox MCX454A-FCAT nic(mlx5
> driver). I can capture the dpdk packets on the recv side using tcpdump. But
> the througput does not reach line rate(24gbps throughput with 40gbps line
> rate).
>
>> Have you offloaded the checksum?
>
>
> Then I want to capture packets on the send side using dpdk-pdump.
> But the dpdk-pdump failed with error "No Ethernet ports - bye".
> The initial info with dpdk-pdump shows that it only probes ixgbe driver
> and 2 Intel nics But not Mellanox nic.
>
>
> Anyone knows why and how to solve it? Thank you.
--
Rgds,
Nishant
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic
2020-06-17 9:22 [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic Licj
2020-06-17 14:16 ` Nishant Verma
@ 2020-06-17 15:00 ` Stephen Hemminger
2020-06-18 2:33 ` Licj
1 sibling, 1 reply; 5+ messages in thread
From: Stephen Hemminger @ 2020-06-17 15:00 UTC (permalink / raw)
To: Licj; +Cc: USERS
On Wed, 17 Jun 2020 17:22:49 +0800
"Licj" <272465698@qq.com> wrote:
> Hi all,
>
> I have run dpdk testpmd successfully with Mellanox MCX454A-FCAT nic(mlx5 driver). I can capture the dpdk packets on the recv side using tcpdump. But the througput does not reach line rate(24gbps throughput with 40gbps line rate).
>
>
> Then I want to capture packets on the send side using dpdk-pdump. But the dpdk-pdump failed with error "No Ethernet ports - bye".
> The initial info with dpdk-pdump shows that it only probes ixgbe driver and 2 Intel nics But not Mellanox nic.
>
>
> Anyone knows why and how to solve it? Thank you.
Mellanox DPDK drivers are not enabled by default in the build.
You need to have rdma-core installed and enable it in the DPDK build config file.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic
2020-06-17 15:00 ` Stephen Hemminger
@ 2020-06-18 2:33 ` Licj
0 siblings, 0 replies; 5+ messages in thread
From: Licj @ 2020-06-18 2:33 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: USERS
Thank you.
I have enabled Mellanox mlx5 driver and recompiled dpdk. The testpmd is running ok.
The problem is dpdk-pdump can't run with testpmd.
------------------ Original ------------------
From: Stephen Hemminger <stephen@networkplumber.org>
Date: Wed,Jun 17,2020 11:00 PM
To: Licj <272465698@qq.com>
Cc: USERS <USERS@DPDK.ORG>
Subject: Re: [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic
On Wed, 17 Jun 2020 17:22:49 +0800
"Licj" <272465698@qq.com> wrote:
> Hi all,
>
> I have run dpdk testpmd successfully with Mellanox MCX454A-FCAT nic(mlx5 driver). I can capture the dpdk packets on the recv side using tcpdump. But the througput does not reach line rate(24gbps throughput with 40gbps line rate).
>
>
> &nbsp;Then I want to capture packets on the send side using dpdk-pdump. But the dpdk-pdump failed with error "No Ethernet ports - bye".
> The initial info with dpdk-pdump shows that it only probes ixgbe driver and 2 Intel nics But not Mellanox nic.
>
>
> Anyone knows why and how to solve it? Thank you.
Mellanox DPDK drivers are not enabled by default in the build.
You need to have rdma-core installed and enable it in the DPDK build config file.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic
@ 2020-06-17 9:11 Licj
0 siblings, 0 replies; 5+ messages in thread
From: Licj @ 2020-06-17 9:11 UTC (permalink / raw)
To: USERS
Hi all,
I have run dpdk testpmd successfully with Mellanox MCX454A-FCAT nic(mlx5 driver). I can capture the dpdk packets on the recv side using tcpdump. But the througput does not reach line rate(24gbps throughput with 40gbps line rate).
Then I want to capture packets on the send side using dpdk-pdump. But the dpdk-pdump failed with error "No Ethernet ports - bye".
The initial info with dpdk-pdump shows that it only probes ixgbe driver and 2 Intel nics But not Mellanox nic.
Anyone knows why and how to solve it? Thank you.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-06-18 2:33 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-17 9:22 [dpdk-users] Dpdk-pdump fails with error "no ethernet port" when running with Mellanox MCX454A-FCAT nic Licj
2020-06-17 14:16 ` Nishant Verma
2020-06-17 15:00 ` Stephen Hemminger
2020-06-18 2:33 ` Licj
-- strict thread matches above, loose matches on Subject: below --
2020-06-17 9:11 Licj
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).