DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
@ 2019-04-05 13:24 Hajkowski
  2019-04-05 13:24 ` Hajkowski
                   ` (5 more replies)
  0 siblings, 6 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Extend guest channel API to allow bidirectional
communication. Modify power manager host and guest
side to communicate in both directions.

---

v5:
* enhance logging

v4:
* [vm_power_manager] treat 0 as valid socket id
* [guest_manager] use user level logs
* correct code formatting

v3:
* fix global_fds[lcore_id] comparison to invalid value
* check 0 to verify if read function actually read some data
* define _NACK cmd instead of _NAK
* simplify rte_power_guest_channel_receive_msg func logic

v2:
* send ack only if power operation return positive value
* log diffent error for unexpected incoming command and
  error during ack/nak cmd sending


Marcin Hajkowski (4):
  power: fix invalid socket indicator value
  power: extend guest channel API for reading
  power: process incoming confirmation cmds
  power: send confirmation cmd to vm guest

 examples/vm_power_manager/channel_monitor.c   | 68 +++++++++++++++--
 examples/vm_power_manager/guest_cli/Makefile  |  1 +
 .../guest_cli/vm_power_cli_guest.c            | 73 +++++++++++++++----
 lib/librte_power/channel_commands.h           |  5 ++
 lib/librte_power/guest_channel.c              | 72 ++++++++++++++++--
 lib/librte_power/guest_channel.h              | 35 +++++++++
 lib/librte_power/rte_power_version.map        |  1 +
 7 files changed, 230 insertions(+), 25 deletions(-)

-- 
2.17.2

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-05 13:24 [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Hajkowski
@ 2019-04-05 13:24 ` Hajkowski
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 1/4] power: fix invalid socket indicator value Hajkowski
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Extend guest channel API to allow bidirectional
communication. Modify power manager host and guest
side to communicate in both directions.

---

v5:
* enhance logging

v4:
* [vm_power_manager] treat 0 as valid socket id
* [guest_manager] use user level logs
* correct code formatting

v3:
* fix global_fds[lcore_id] comparison to invalid value
* check 0 to verify if read function actually read some data
* define _NACK cmd instead of _NAK
* simplify rte_power_guest_channel_receive_msg func logic

v2:
* send ack only if power operation return positive value
* log diffent error for unexpected incoming command and
  error during ack/nak cmd sending


Marcin Hajkowski (4):
  power: fix invalid socket indicator value
  power: extend guest channel API for reading
  power: process incoming confirmation cmds
  power: send confirmation cmd to vm guest

 examples/vm_power_manager/channel_monitor.c   | 68 +++++++++++++++--
 examples/vm_power_manager/guest_cli/Makefile  |  1 +
 .../guest_cli/vm_power_cli_guest.c            | 73 +++++++++++++++----
 lib/librte_power/channel_commands.h           |  5 ++
 lib/librte_power/guest_channel.c              | 72 ++++++++++++++++--
 lib/librte_power/guest_channel.h              | 35 +++++++++
 lib/librte_power/rte_power_version.map        |  1 +
 7 files changed, 230 insertions(+), 25 deletions(-)

-- 
2.17.2


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 1/4] power: fix invalid socket indicator value
  2019-04-05 13:24 [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Hajkowski
  2019-04-05 13:24 ` Hajkowski
@ 2019-04-05 13:24 ` Hajkowski
  2019-04-05 13:24   ` Hajkowski
  2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading Hajkowski
                   ` (3 subsequent siblings)
  5 siblings, 2 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt
  Cc: dev, Marcin Hajkowski, stable, Maxime Coquelin, Anatoly Burakov

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Currently 0 is being used for not connected slot indication.
This is not consistent with linux doc which identifies 0 as valid
(connected) slot, thus modification was done to change it.

Fixes: cd0d5547 ("power: vm communication channels in guest")
Cc: stable@dpdk.org

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
 lib/librte_power/guest_channel.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
index c17ea46b4..9cf7d2cb2 100644
--- a/lib/librte_power/guest_channel.c
+++ b/lib/librte_power/guest_channel.c
@@ -19,7 +19,7 @@
 
 #define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
 
-static int global_fds[RTE_MAX_LCORE];
+static int global_fds[RTE_MAX_LCORE] = { [0 ... RTE_MAX_LCORE-1] = -1 };
 
 int
 guest_channel_host_connect(const char *path, unsigned int lcore_id)
@@ -35,7 +35,7 @@ guest_channel_host_connect(const char *path, unsigned int lcore_id)
 		return -1;
 	}
 	/* check if path is already open */
-	if (global_fds[lcore_id] != 0) {
+	if (global_fds[lcore_id] != -1) {
 		RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is already open with fd %d\n",
 				lcore_id, global_fds[lcore_id]);
 		return -1;
@@ -84,7 +84,7 @@ guest_channel_host_connect(const char *path, unsigned int lcore_id)
 	return 0;
 error:
 	close(fd);
-	global_fds[lcore_id] = 0;
+	global_fds[lcore_id] = -1;
 	return -1;
 }
 
@@ -100,7 +100,7 @@ guest_channel_send_msg(struct channel_packet *pkt, unsigned int lcore_id)
 		return -1;
 	}
 
-	if (global_fds[lcore_id] == 0) {
+	if (global_fds[lcore_id] < 0) {
 		RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
 		return -1;
 	}
@@ -134,8 +134,8 @@ guest_channel_host_disconnect(unsigned int lcore_id)
 				lcore_id, RTE_MAX_LCORE-1);
 		return;
 	}
-	if (global_fds[lcore_id] == 0)
+	if (global_fds[lcore_id] < 0)
 		return;
 	close(global_fds[lcore_id]);
-	global_fds[lcore_id] = 0;
+	global_fds[lcore_id] = -1;
 }
-- 
2.17.2

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 1/4] power: fix invalid socket indicator value
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 1/4] power: fix invalid socket indicator value Hajkowski
@ 2019-04-05 13:24   ` Hajkowski
  2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
  1 sibling, 0 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt
  Cc: dev, Marcin Hajkowski, stable, Maxime Coquelin, Anatoly Burakov

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Currently 0 is being used for not connected slot indication.
This is not consistent with linux doc which identifies 0 as valid
(connected) slot, thus modification was done to change it.

Fixes: cd0d5547 ("power: vm communication channels in guest")
Cc: stable@dpdk.org

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
 lib/librte_power/guest_channel.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
index c17ea46b4..9cf7d2cb2 100644
--- a/lib/librte_power/guest_channel.c
+++ b/lib/librte_power/guest_channel.c
@@ -19,7 +19,7 @@
 
 #define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
 
-static int global_fds[RTE_MAX_LCORE];
+static int global_fds[RTE_MAX_LCORE] = { [0 ... RTE_MAX_LCORE-1] = -1 };
 
 int
 guest_channel_host_connect(const char *path, unsigned int lcore_id)
@@ -35,7 +35,7 @@ guest_channel_host_connect(const char *path, unsigned int lcore_id)
 		return -1;
 	}
 	/* check if path is already open */
-	if (global_fds[lcore_id] != 0) {
+	if (global_fds[lcore_id] != -1) {
 		RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is already open with fd %d\n",
 				lcore_id, global_fds[lcore_id]);
 		return -1;
@@ -84,7 +84,7 @@ guest_channel_host_connect(const char *path, unsigned int lcore_id)
 	return 0;
 error:
 	close(fd);
-	global_fds[lcore_id] = 0;
+	global_fds[lcore_id] = -1;
 	return -1;
 }
 
@@ -100,7 +100,7 @@ guest_channel_send_msg(struct channel_packet *pkt, unsigned int lcore_id)
 		return -1;
 	}
 
-	if (global_fds[lcore_id] == 0) {
+	if (global_fds[lcore_id] < 0) {
 		RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
 		return -1;
 	}
@@ -134,8 +134,8 @@ guest_channel_host_disconnect(unsigned int lcore_id)
 				lcore_id, RTE_MAX_LCORE-1);
 		return;
 	}
-	if (global_fds[lcore_id] == 0)
+	if (global_fds[lcore_id] < 0)
 		return;
 	close(global_fds[lcore_id]);
-	global_fds[lcore_id] = 0;
+	global_fds[lcore_id] = -1;
 }
-- 
2.17.2


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading
  2019-04-05 13:24 [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Hajkowski
  2019-04-05 13:24 ` Hajkowski
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 1/4] power: fix invalid socket indicator value Hajkowski
@ 2019-04-05 13:24 ` Hajkowski
  2019-04-05 13:24   ` Hajkowski
  2019-09-26 13:00   ` Hunt, David
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds Hajkowski
                   ` (2 subsequent siblings)
  5 siblings, 2 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Added new experimental API rte_power_guest_channel_receive_msg
which gives possibility to receive messages send to guest.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
---
 lib/librte_power/channel_commands.h    |  5 +++
 lib/librte_power/guest_channel.c       | 60 ++++++++++++++++++++++++++
 lib/librte_power/guest_channel.h       | 35 +++++++++++++++
 lib/librte_power/rte_power_version.map |  1 +
 4 files changed, 101 insertions(+)

diff --git a/lib/librte_power/channel_commands.h b/lib/librte_power/channel_commands.h
index e7b93a797..33fd53a6d 100644
--- a/lib/librte_power/channel_commands.h
+++ b/lib/librte_power/channel_commands.h
@@ -28,6 +28,11 @@ extern "C" {
 #define CPU_POWER_SCALE_MIN     4
 #define CPU_POWER_ENABLE_TURBO  5
 #define CPU_POWER_DISABLE_TURBO 6
+
+/* Generic Power Command Response */
+#define CPU_POWER_CMD_ACK       1
+#define CPU_POWER_CMD_NACK      2
+
 #define HOURS 24
 
 #define MAX_VFS 10
diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
index 9cf7d2cb2..888423891 100644
--- a/lib/librte_power/guest_channel.c
+++ b/lib/librte_power/guest_channel.c
@@ -10,6 +10,7 @@
 #include <fcntl.h>
 #include <string.h>
 #include <errno.h>
+#include <poll.h>
 
 
 #include <rte_log.h>
@@ -19,6 +20,9 @@
 
 #define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
 
+/* Timeout for incoming message in milliseconds. */
+#define TIMEOUT 10
+
 static int global_fds[RTE_MAX_LCORE] = { [0 ... RTE_MAX_LCORE-1] = -1 };
 
 int
@@ -125,6 +129,62 @@ int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
 	return guest_channel_send_msg(pkt, lcore_id);
 }
 
+int power_guest_channel_read_msg(struct channel_packet *pkt,
+			unsigned int lcore_id)
+{
+	int ret;
+	struct pollfd fds;
+	void *buffer = pkt;
+	int buffer_len = sizeof(*pkt);
+
+	fds.fd = global_fds[lcore_id];
+	fds.events = POLLIN;
+
+	ret = poll(&fds, 1, TIMEOUT);
+	if (ret == 0) {
+		RTE_LOG(DEBUG, GUEST_CHANNEL, "Timeout occurred during poll function.\n");
+		return -1;
+	} else if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Error occurred during poll function: %s\n",
+				strerror(ret));
+		return -1;
+	}
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+				lcore_id, RTE_MAX_LCORE-1);
+		return -1;
+	}
+
+	if (global_fds[lcore_id] < 0) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
+		return -1;
+	}
+
+	while (buffer_len > 0) {
+		ret = read(global_fds[lcore_id],
+				buffer, buffer_len);
+		if (ret < 0) {
+			if (errno == EINTR)
+				continue;
+			return -1;
+		}
+		if (ret == 0) {
+			RTE_LOG(ERR, GUEST_CHANNEL, "Expected more data, but connection has been closed.\n");
+			return -1;
+		}
+		buffer = (char *)buffer + ret;
+		buffer_len -= ret;
+	}
+
+	return 0;
+}
+
+int rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
+			unsigned int lcore_id)
+{
+	return power_guest_channel_read_msg(pkt, lcore_id);
+}
 
 void
 guest_channel_host_disconnect(unsigned int lcore_id)
diff --git a/lib/librte_power/guest_channel.h b/lib/librte_power/guest_channel.h
index 373d39898..7c385df39 100644
--- a/lib/librte_power/guest_channel.h
+++ b/lib/librte_power/guest_channel.h
@@ -68,6 +68,41 @@ int guest_channel_send_msg(struct channel_packet *pkt, unsigned int lcore_id);
 int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
 			unsigned int lcore_id);
 
+/**
+ * Read a message contained in pkt over the Virtio-Serial
+ * from the host endpoint.
+ *
+ * @param pkt
+ *  Pointer to a populated struct channel_packet
+ *
+ * @param lcore_id
+ *  lcore_id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int power_guest_channel_read_msg(struct channel_packet *pkt,
+		unsigned int lcore_id);
+
+/**
+ * Receive a message contained in pkt over the Virtio-Serial
+ * from the host endpoint.
+ *
+ * @param pkt
+ *  Pointer to a populated struct channel_packet
+ *
+ * @param lcore_id
+ *  lcore_id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int __rte_experimental
+rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
+			unsigned int lcore_id);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/rte_power_version.map
index 042917360..69f5ea3f4 100644
--- a/lib/librte_power/rte_power_version.map
+++ b/lib/librte_power/rte_power_version.map
@@ -44,4 +44,5 @@ EXPERIMENTAL {
 	rte_power_empty_poll_stat_update;
 	rte_power_poll_stat_fetch;
 	rte_power_poll_stat_update;
+	rte_power_guest_channel_receive_msg;
 };
-- 
2.17.2

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading Hajkowski
@ 2019-04-05 13:24   ` Hajkowski
  2019-09-26 13:00   ` Hunt, David
  1 sibling, 0 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Added new experimental API rte_power_guest_channel_receive_msg
which gives possibility to receive messages send to guest.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
---
 lib/librte_power/channel_commands.h    |  5 +++
 lib/librte_power/guest_channel.c       | 60 ++++++++++++++++++++++++++
 lib/librte_power/guest_channel.h       | 35 +++++++++++++++
 lib/librte_power/rte_power_version.map |  1 +
 4 files changed, 101 insertions(+)

diff --git a/lib/librte_power/channel_commands.h b/lib/librte_power/channel_commands.h
index e7b93a797..33fd53a6d 100644
--- a/lib/librte_power/channel_commands.h
+++ b/lib/librte_power/channel_commands.h
@@ -28,6 +28,11 @@ extern "C" {
 #define CPU_POWER_SCALE_MIN     4
 #define CPU_POWER_ENABLE_TURBO  5
 #define CPU_POWER_DISABLE_TURBO 6
+
+/* Generic Power Command Response */
+#define CPU_POWER_CMD_ACK       1
+#define CPU_POWER_CMD_NACK      2
+
 #define HOURS 24
 
 #define MAX_VFS 10
diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
index 9cf7d2cb2..888423891 100644
--- a/lib/librte_power/guest_channel.c
+++ b/lib/librte_power/guest_channel.c
@@ -10,6 +10,7 @@
 #include <fcntl.h>
 #include <string.h>
 #include <errno.h>
+#include <poll.h>
 
 
 #include <rte_log.h>
@@ -19,6 +20,9 @@
 
 #define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
 
+/* Timeout for incoming message in milliseconds. */
+#define TIMEOUT 10
+
 static int global_fds[RTE_MAX_LCORE] = { [0 ... RTE_MAX_LCORE-1] = -1 };
 
 int
@@ -125,6 +129,62 @@ int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
 	return guest_channel_send_msg(pkt, lcore_id);
 }
 
+int power_guest_channel_read_msg(struct channel_packet *pkt,
+			unsigned int lcore_id)
+{
+	int ret;
+	struct pollfd fds;
+	void *buffer = pkt;
+	int buffer_len = sizeof(*pkt);
+
+	fds.fd = global_fds[lcore_id];
+	fds.events = POLLIN;
+
+	ret = poll(&fds, 1, TIMEOUT);
+	if (ret == 0) {
+		RTE_LOG(DEBUG, GUEST_CHANNEL, "Timeout occurred during poll function.\n");
+		return -1;
+	} else if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Error occurred during poll function: %s\n",
+				strerror(ret));
+		return -1;
+	}
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+				lcore_id, RTE_MAX_LCORE-1);
+		return -1;
+	}
+
+	if (global_fds[lcore_id] < 0) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
+		return -1;
+	}
+
+	while (buffer_len > 0) {
+		ret = read(global_fds[lcore_id],
+				buffer, buffer_len);
+		if (ret < 0) {
+			if (errno == EINTR)
+				continue;
+			return -1;
+		}
+		if (ret == 0) {
+			RTE_LOG(ERR, GUEST_CHANNEL, "Expected more data, but connection has been closed.\n");
+			return -1;
+		}
+		buffer = (char *)buffer + ret;
+		buffer_len -= ret;
+	}
+
+	return 0;
+}
+
+int rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
+			unsigned int lcore_id)
+{
+	return power_guest_channel_read_msg(pkt, lcore_id);
+}
 
 void
 guest_channel_host_disconnect(unsigned int lcore_id)
diff --git a/lib/librte_power/guest_channel.h b/lib/librte_power/guest_channel.h
index 373d39898..7c385df39 100644
--- a/lib/librte_power/guest_channel.h
+++ b/lib/librte_power/guest_channel.h
@@ -68,6 +68,41 @@ int guest_channel_send_msg(struct channel_packet *pkt, unsigned int lcore_id);
 int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
 			unsigned int lcore_id);
 
+/**
+ * Read a message contained in pkt over the Virtio-Serial
+ * from the host endpoint.
+ *
+ * @param pkt
+ *  Pointer to a populated struct channel_packet
+ *
+ * @param lcore_id
+ *  lcore_id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int power_guest_channel_read_msg(struct channel_packet *pkt,
+		unsigned int lcore_id);
+
+/**
+ * Receive a message contained in pkt over the Virtio-Serial
+ * from the host endpoint.
+ *
+ * @param pkt
+ *  Pointer to a populated struct channel_packet
+ *
+ * @param lcore_id
+ *  lcore_id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int __rte_experimental
+rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
+			unsigned int lcore_id);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/rte_power_version.map
index 042917360..69f5ea3f4 100644
--- a/lib/librte_power/rte_power_version.map
+++ b/lib/librte_power/rte_power_version.map
@@ -44,4 +44,5 @@ EXPERIMENTAL {
 	rte_power_empty_poll_stat_update;
 	rte_power_poll_stat_fetch;
 	rte_power_poll_stat_update;
+	rte_power_guest_channel_receive_msg;
 };
-- 
2.17.2


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds
  2019-04-05 13:24 [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Hajkowski
                   ` (2 preceding siblings ...)
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading Hajkowski
@ 2019-04-05 13:24 ` Hajkowski
  2019-04-05 13:24   ` Hajkowski
  2019-09-26 13:01   ` Hunt, David
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest Hajkowski
  2019-04-22 20:36 ` [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Thomas Monjalon
  5 siblings, 2 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Extend vm_power_guest to check incoming confirmations
of messages previously sent to host.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
---
 examples/vm_power_manager/guest_cli/Makefile  |  1 +
 .../guest_cli/vm_power_cli_guest.c            | 73 +++++++++++++++----
 2 files changed, 61 insertions(+), 13 deletions(-)

diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
index e35a68d0f..67cf08193 100644
--- a/examples/vm_power_manager/guest_cli/Makefile
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -18,6 +18,7 @@ SRCS-y := main.c vm_power_cli_guest.c parse.c
 
 CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
 CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
 
 # workaround for a gcc bug with noreturn attribute
 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
index 2d9e7689a..49ed7b208 100644
--- a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
@@ -27,7 +27,7 @@
 #define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
 
 
-#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_GUEST_CLI RTE_LOGTYPE_USER1
 
 struct cmd_quit_result {
 	cmdline_fixed_string_t quit;
@@ -132,6 +132,32 @@ struct cmd_set_cpu_freq_result {
 	cmdline_fixed_string_t cmd;
 };
 
+static int
+check_response_cmd(unsigned int lcore_id, int *result)
+{
+	struct channel_packet pkt;
+	int ret;
+
+	ret = rte_power_guest_channel_receive_msg(&pkt, lcore_id);
+	if (ret < 0)
+		return -1;
+
+	switch (pkt.command) {
+	case(CPU_POWER_CMD_ACK):
+		*result = 1;
+		break;
+	case(CPU_POWER_CMD_NACK):
+		*result = 0;
+		break;
+	default:
+		RTE_LOG(ERR, GUEST_CLI,
+				"Received invalid response from host, expecting ACK/NACK.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 static void
 cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
 		       __attribute__((unused)) void *data)
@@ -139,20 +165,31 @@ cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
 	int ret = -1;
 	struct cmd_set_cpu_freq_result *res = parsed_result;
 
-	if (!strcmp(res->cmd , "up"))
+	if (!strcmp(res->cmd, "up"))
 		ret = rte_power_freq_up(res->lcore_id);
-	else if (!strcmp(res->cmd , "down"))
+	else if (!strcmp(res->cmd, "down"))
 		ret = rte_power_freq_down(res->lcore_id);
-	else if (!strcmp(res->cmd , "min"))
+	else if (!strcmp(res->cmd, "min"))
 		ret = rte_power_freq_min(res->lcore_id);
-	else if (!strcmp(res->cmd , "max"))
+	else if (!strcmp(res->cmd, "max"))
 		ret = rte_power_freq_max(res->lcore_id);
 	else if (!strcmp(res->cmd, "enable_turbo"))
 		ret = rte_power_freq_enable_turbo(res->lcore_id);
 	else if (!strcmp(res->cmd, "disable_turbo"))
 		ret = rte_power_freq_disable_turbo(res->lcore_id);
-	if (ret != 1)
+
+	if (ret != 1) {
 		cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
+		return;
+	}
+	int result;
+	ret = check_response_cmd(res->lcore_id, &result);
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent message received\n");
+	} else {
+		cmdline_printf(cl, "%s received for message sent to host.\n",
+				result == 1 ? "ACK" : "NACK");
+	}
 }
 
 cmdline_parse_token_string_t cmd_set_cpu_freq =
@@ -185,16 +222,26 @@ struct cmd_send_policy_result {
 };
 
 static inline int
-send_policy(struct channel_packet *pkt)
+send_policy(struct channel_packet *pkt, struct cmdline *cl)
 {
 	int ret;
 
 	ret = rte_power_guest_channel_send_msg(pkt, 1);
-	if (ret == 0)
-		return 1;
-	RTE_LOG(DEBUG, POWER, "Error sending message: %s\n",
-			ret > 0 ? strerror(ret) : "channel not connected");
-	return -1;
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "Error sending message: %s\n",
+				ret > 0 ? strerror(ret) : "channel not connected");
+		return -1;
+	}
+
+	int result;
+	ret = check_response_cmd(1, &result);
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent policy received\n");
+	} else {
+		cmdline_printf(cl, "%s for sent policy received.\n",
+				result == 1 ? "ACK" : "NACK");
+	}
+	return 1;
 }
 
 static void
@@ -206,7 +253,7 @@ cmd_send_policy_parsed(void *parsed_result, struct cmdline *cl,
 
 	if (!strcmp(res->cmd, "now")) {
 		printf("Sending Policy down now!\n");
-		ret = send_policy(&policy);
+		ret = send_policy(&policy, cl);
 	}
 	if (ret != 1)
 		cmdline_printf(cl, "Error sending message: %s\n",
-- 
2.17.2

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds Hajkowski
@ 2019-04-05 13:24   ` Hajkowski
  2019-09-26 13:01   ` Hunt, David
  1 sibling, 0 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Extend vm_power_guest to check incoming confirmations
of messages previously sent to host.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
---
 examples/vm_power_manager/guest_cli/Makefile  |  1 +
 .../guest_cli/vm_power_cli_guest.c            | 73 +++++++++++++++----
 2 files changed, 61 insertions(+), 13 deletions(-)

diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
index e35a68d0f..67cf08193 100644
--- a/examples/vm_power_manager/guest_cli/Makefile
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -18,6 +18,7 @@ SRCS-y := main.c vm_power_cli_guest.c parse.c
 
 CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
 CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
 
 # workaround for a gcc bug with noreturn attribute
 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
index 2d9e7689a..49ed7b208 100644
--- a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
@@ -27,7 +27,7 @@
 #define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
 
 
-#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_GUEST_CLI RTE_LOGTYPE_USER1
 
 struct cmd_quit_result {
 	cmdline_fixed_string_t quit;
@@ -132,6 +132,32 @@ struct cmd_set_cpu_freq_result {
 	cmdline_fixed_string_t cmd;
 };
 
+static int
+check_response_cmd(unsigned int lcore_id, int *result)
+{
+	struct channel_packet pkt;
+	int ret;
+
+	ret = rte_power_guest_channel_receive_msg(&pkt, lcore_id);
+	if (ret < 0)
+		return -1;
+
+	switch (pkt.command) {
+	case(CPU_POWER_CMD_ACK):
+		*result = 1;
+		break;
+	case(CPU_POWER_CMD_NACK):
+		*result = 0;
+		break;
+	default:
+		RTE_LOG(ERR, GUEST_CLI,
+				"Received invalid response from host, expecting ACK/NACK.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 static void
 cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
 		       __attribute__((unused)) void *data)
@@ -139,20 +165,31 @@ cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
 	int ret = -1;
 	struct cmd_set_cpu_freq_result *res = parsed_result;
 
-	if (!strcmp(res->cmd , "up"))
+	if (!strcmp(res->cmd, "up"))
 		ret = rte_power_freq_up(res->lcore_id);
-	else if (!strcmp(res->cmd , "down"))
+	else if (!strcmp(res->cmd, "down"))
 		ret = rte_power_freq_down(res->lcore_id);
-	else if (!strcmp(res->cmd , "min"))
+	else if (!strcmp(res->cmd, "min"))
 		ret = rte_power_freq_min(res->lcore_id);
-	else if (!strcmp(res->cmd , "max"))
+	else if (!strcmp(res->cmd, "max"))
 		ret = rte_power_freq_max(res->lcore_id);
 	else if (!strcmp(res->cmd, "enable_turbo"))
 		ret = rte_power_freq_enable_turbo(res->lcore_id);
 	else if (!strcmp(res->cmd, "disable_turbo"))
 		ret = rte_power_freq_disable_turbo(res->lcore_id);
-	if (ret != 1)
+
+	if (ret != 1) {
 		cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
+		return;
+	}
+	int result;
+	ret = check_response_cmd(res->lcore_id, &result);
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent message received\n");
+	} else {
+		cmdline_printf(cl, "%s received for message sent to host.\n",
+				result == 1 ? "ACK" : "NACK");
+	}
 }
 
 cmdline_parse_token_string_t cmd_set_cpu_freq =
@@ -185,16 +222,26 @@ struct cmd_send_policy_result {
 };
 
 static inline int
-send_policy(struct channel_packet *pkt)
+send_policy(struct channel_packet *pkt, struct cmdline *cl)
 {
 	int ret;
 
 	ret = rte_power_guest_channel_send_msg(pkt, 1);
-	if (ret == 0)
-		return 1;
-	RTE_LOG(DEBUG, POWER, "Error sending message: %s\n",
-			ret > 0 ? strerror(ret) : "channel not connected");
-	return -1;
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "Error sending message: %s\n",
+				ret > 0 ? strerror(ret) : "channel not connected");
+		return -1;
+	}
+
+	int result;
+	ret = check_response_cmd(1, &result);
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent policy received\n");
+	} else {
+		cmdline_printf(cl, "%s for sent policy received.\n",
+				result == 1 ? "ACK" : "NACK");
+	}
+	return 1;
 }
 
 static void
@@ -206,7 +253,7 @@ cmd_send_policy_parsed(void *parsed_result, struct cmdline *cl,
 
 	if (!strcmp(res->cmd, "now")) {
 		printf("Sending Policy down now!\n");
-		ret = send_policy(&policy);
+		ret = send_policy(&policy, cl);
 	}
 	if (ret != 1)
 		cmdline_printf(cl, "Error sending message: %s\n",
-- 
2.17.2


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest
  2019-04-05 13:24 [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Hajkowski
                   ` (3 preceding siblings ...)
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds Hajkowski
@ 2019-04-05 13:24 ` Hajkowski
  2019-04-05 13:24   ` Hajkowski
  2019-09-26 13:06   ` Hunt, David
  2019-04-22 20:36 ` [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Thomas Monjalon
  5 siblings, 2 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Use new guest channel API to send confirmation
message for received power command.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
---
 examples/vm_power_manager/channel_monitor.c | 68 +++++++++++++++++++--
 1 file changed, 62 insertions(+), 6 deletions(-)

diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
index 7892d75de..ed580b36a 100644
--- a/examples/vm_power_manager/channel_monitor.c
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -627,6 +627,41 @@ apply_policy(struct policy *pol)
 		apply_workload_profile(pol);
 }
 
+static int
+write_binary_packet(struct channel_packet *pkt, struct channel_info *chan_info)
+{
+	int ret, buffer_len = sizeof(*pkt);
+	void *buffer = pkt;
+
+	if (chan_info->fd < 0) {
+		RTE_LOG(ERR, CHANNEL_MONITOR, "Channel is not connected\n");
+		return -1;
+	}
+
+	while (buffer_len > 0) {
+		ret = write(chan_info->fd, buffer, buffer_len);
+		if (ret == -1) {
+			if (errno == EINTR)
+				continue;
+			RTE_LOG(ERR, CHANNEL_MONITOR, "Write function failed due to %s.\n",
+					strerror(errno));
+			return -1;
+		}
+		buffer = (char *)buffer + ret;
+		buffer_len -= ret;
+	}
+	return 0;
+}
+
+static int
+send_ack_for_received_cmd(struct channel_packet *pkt,
+		struct channel_info *chan_info,
+		uint32_t command)
+{
+	pkt->command = command;
+	return write_binary_packet(pkt, chan_info);
+}
+
 static int
 process_request(struct channel_packet *pkt, struct channel_info *chan_info)
 {
@@ -650,33 +685,54 @@ process_request(struct channel_packet *pkt, struct channel_info *chan_info)
 		RTE_LOG(DEBUG, CHANNEL_MONITOR, "Processing requested cmd for cpu:%d\n",
 			core_num);
 
+		bool valid_unit = true;
+		int scale_res;
+
 		switch (pkt->unit) {
 		case(CPU_POWER_SCALE_MIN):
-			power_manager_scale_core_min(core_num);
+			scale_res = power_manager_scale_core_min(core_num);
 			break;
 		case(CPU_POWER_SCALE_MAX):
-			power_manager_scale_core_max(core_num);
+			scale_res = power_manager_scale_core_max(core_num);
 			break;
 		case(CPU_POWER_SCALE_DOWN):
-			power_manager_scale_core_down(core_num);
+			scale_res = power_manager_scale_core_down(core_num);
 			break;
 		case(CPU_POWER_SCALE_UP):
-			power_manager_scale_core_up(core_num);
+			scale_res = power_manager_scale_core_up(core_num);
 			break;
 		case(CPU_POWER_ENABLE_TURBO):
-			power_manager_enable_turbo_core(core_num);
+			scale_res = power_manager_enable_turbo_core(core_num);
 			break;
 		case(CPU_POWER_DISABLE_TURBO):
-			power_manager_disable_turbo_core(core_num);
+			scale_res = power_manager_disable_turbo_core(core_num);
 			break;
 		default:
+			valid_unit = false;
 			break;
 		}
+
+		if (valid_unit) {
+			ret = send_ack_for_received_cmd(pkt,
+					chan_info,
+					scale_res > 0 ?
+						CPU_POWER_CMD_ACK :
+						CPU_POWER_CMD_NACK);
+			if (ret < 0)
+				RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
+		} else
+			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Unexpected unit type.\n");
+
 	}
 
 	if (pkt->command == PKT_POLICY) {
 		RTE_LOG(INFO, CHANNEL_MONITOR, "Processing policy request %s\n",
 				pkt->vm_name);
+		int ret = send_ack_for_received_cmd(pkt,
+				chan_info,
+				CPU_POWER_CMD_ACK);
+		if (ret < 0)
+			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
 		update_policy(pkt);
 		policy_is_set = 1;
 	}
-- 
2.17.2

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest Hajkowski
@ 2019-04-05 13:24   ` Hajkowski
  2019-09-26 13:06   ` Hunt, David
  1 sibling, 0 replies; 29+ messages in thread
From: Hajkowski @ 2019-04-05 13:24 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

From: Marcin Hajkowski <marcinx.hajkowski@intel.com>

Use new guest channel API to send confirmation
message for received power command.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
---
 examples/vm_power_manager/channel_monitor.c | 68 +++++++++++++++++++--
 1 file changed, 62 insertions(+), 6 deletions(-)

diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
index 7892d75de..ed580b36a 100644
--- a/examples/vm_power_manager/channel_monitor.c
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -627,6 +627,41 @@ apply_policy(struct policy *pol)
 		apply_workload_profile(pol);
 }
 
+static int
+write_binary_packet(struct channel_packet *pkt, struct channel_info *chan_info)
+{
+	int ret, buffer_len = sizeof(*pkt);
+	void *buffer = pkt;
+
+	if (chan_info->fd < 0) {
+		RTE_LOG(ERR, CHANNEL_MONITOR, "Channel is not connected\n");
+		return -1;
+	}
+
+	while (buffer_len > 0) {
+		ret = write(chan_info->fd, buffer, buffer_len);
+		if (ret == -1) {
+			if (errno == EINTR)
+				continue;
+			RTE_LOG(ERR, CHANNEL_MONITOR, "Write function failed due to %s.\n",
+					strerror(errno));
+			return -1;
+		}
+		buffer = (char *)buffer + ret;
+		buffer_len -= ret;
+	}
+	return 0;
+}
+
+static int
+send_ack_for_received_cmd(struct channel_packet *pkt,
+		struct channel_info *chan_info,
+		uint32_t command)
+{
+	pkt->command = command;
+	return write_binary_packet(pkt, chan_info);
+}
+
 static int
 process_request(struct channel_packet *pkt, struct channel_info *chan_info)
 {
@@ -650,33 +685,54 @@ process_request(struct channel_packet *pkt, struct channel_info *chan_info)
 		RTE_LOG(DEBUG, CHANNEL_MONITOR, "Processing requested cmd for cpu:%d\n",
 			core_num);
 
+		bool valid_unit = true;
+		int scale_res;
+
 		switch (pkt->unit) {
 		case(CPU_POWER_SCALE_MIN):
-			power_manager_scale_core_min(core_num);
+			scale_res = power_manager_scale_core_min(core_num);
 			break;
 		case(CPU_POWER_SCALE_MAX):
-			power_manager_scale_core_max(core_num);
+			scale_res = power_manager_scale_core_max(core_num);
 			break;
 		case(CPU_POWER_SCALE_DOWN):
-			power_manager_scale_core_down(core_num);
+			scale_res = power_manager_scale_core_down(core_num);
 			break;
 		case(CPU_POWER_SCALE_UP):
-			power_manager_scale_core_up(core_num);
+			scale_res = power_manager_scale_core_up(core_num);
 			break;
 		case(CPU_POWER_ENABLE_TURBO):
-			power_manager_enable_turbo_core(core_num);
+			scale_res = power_manager_enable_turbo_core(core_num);
 			break;
 		case(CPU_POWER_DISABLE_TURBO):
-			power_manager_disable_turbo_core(core_num);
+			scale_res = power_manager_disable_turbo_core(core_num);
 			break;
 		default:
+			valid_unit = false;
 			break;
 		}
+
+		if (valid_unit) {
+			ret = send_ack_for_received_cmd(pkt,
+					chan_info,
+					scale_res > 0 ?
+						CPU_POWER_CMD_ACK :
+						CPU_POWER_CMD_NACK);
+			if (ret < 0)
+				RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
+		} else
+			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Unexpected unit type.\n");
+
 	}
 
 	if (pkt->command == PKT_POLICY) {
 		RTE_LOG(INFO, CHANNEL_MONITOR, "Processing policy request %s\n",
 				pkt->vm_name);
+		int ret = send_ack_for_received_cmd(pkt,
+				chan_info,
+				CPU_POWER_CMD_ACK);
+		if (ret < 0)
+			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
 		update_policy(pkt);
 		policy_is_set = 1;
 	}
-- 
2.17.2


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-05 13:24 [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Hajkowski
                   ` (4 preceding siblings ...)
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest Hajkowski
@ 2019-04-22 20:36 ` Thomas Monjalon
  2019-04-22 20:36   ` Thomas Monjalon
  2019-04-24  8:38   ` Hunt, David
  5 siblings, 2 replies; 29+ messages in thread
From: Thomas Monjalon @ 2019-04-22 20:36 UTC (permalink / raw)
  To: david.hunt, Marcin Hajkowski; +Cc: dev

05/04/2019 15:24, Hajkowski:
> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> 
> Extend guest channel API to allow bidirectional
> communication. Modify power manager host and guest
> side to communicate in both directions.

This patchset is deferred to 19.08 because of a lack
of review.

Note: too many librte_power patches are not reviewed.

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-22 20:36 ` [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Thomas Monjalon
@ 2019-04-22 20:36   ` Thomas Monjalon
  2019-04-24  8:38   ` Hunt, David
  1 sibling, 0 replies; 29+ messages in thread
From: Thomas Monjalon @ 2019-04-22 20:36 UTC (permalink / raw)
  To: david.hunt, Marcin Hajkowski; +Cc: dev

05/04/2019 15:24, Hajkowski:
> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> 
> Extend guest channel API to allow bidirectional
> communication. Modify power manager host and guest
> side to communicate in both directions.

This patchset is deferred to 19.08 because of a lack
of review.

Note: too many librte_power patches are not reviewed.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-22 20:36 ` [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Thomas Monjalon
  2019-04-22 20:36   ` Thomas Monjalon
@ 2019-04-24  8:38   ` Hunt, David
  2019-04-24  8:38     ` Hunt, David
  2019-04-24  8:44     ` Thomas Monjalon
  1 sibling, 2 replies; 29+ messages in thread
From: Hunt, David @ 2019-04-24  8:38 UTC (permalink / raw)
  To: Thomas Monjalon, Marcin Hajkowski; +Cc: dev

On 22/4/2019 9:36 PM, Thomas Monjalon wrote:
> 05/04/2019 15:24, Hajkowski:
>> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
>>
>> Extend guest channel API to allow bidirectional
>> communication. Modify power manager host and guest
>> side to communicate in both directions.
> This patchset is deferred to 19.08 because of a lack
> of review.
>
> Note: too many librte_power patches are not reviewed.


Hi Thomas,

  The four remaining patch sets for power were initially submitted after 
the v1 deadline, and were not expected to make it into 19.05. We will be 
sure to review for 19.08.

Regards,
Dave.

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-24  8:38   ` Hunt, David
@ 2019-04-24  8:38     ` Hunt, David
  2019-04-24  8:44     ` Thomas Monjalon
  1 sibling, 0 replies; 29+ messages in thread
From: Hunt, David @ 2019-04-24  8:38 UTC (permalink / raw)
  To: Thomas Monjalon, Marcin Hajkowski; +Cc: dev

On 22/4/2019 9:36 PM, Thomas Monjalon wrote:
> 05/04/2019 15:24, Hajkowski:
>> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
>>
>> Extend guest channel API to allow bidirectional
>> communication. Modify power manager host and guest
>> side to communicate in both directions.
> This patchset is deferred to 19.08 because of a lack
> of review.
>
> Note: too many librte_power patches are not reviewed.


Hi Thomas,

  The four remaining patch sets for power were initially submitted after 
the v1 deadline, and were not expected to make it into 19.05. We will be 
sure to review for 19.08.

Regards,
Dave.


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-24  8:38   ` Hunt, David
  2019-04-24  8:38     ` Hunt, David
@ 2019-04-24  8:44     ` Thomas Monjalon
  2019-04-24  8:44       ` Thomas Monjalon
  2019-07-04 19:55       ` Thomas Monjalon
  1 sibling, 2 replies; 29+ messages in thread
From: Thomas Monjalon @ 2019-04-24  8:44 UTC (permalink / raw)
  To: Hunt, David, Marcin Hajkowski; +Cc: dev

24/04/2019 10:38, Hunt, David:
> On 22/4/2019 9:36 PM, Thomas Monjalon wrote:
> > 05/04/2019 15:24, Hajkowski:
> >> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> >>
> >> Extend guest channel API to allow bidirectional
> >> communication. Modify power manager host and guest
> >> side to communicate in both directions.
> > This patchset is deferred to 19.08 because of a lack
> > of review.
> >
> > Note: too many librte_power patches are not reviewed.
> 
> 
> Hi Thomas,
> 
>   The four remaining patch sets for power were initially submitted after 
> the v1 deadline, and were not expected to make it into 19.05. We will be 
> sure to review for 19.08.

OK thanks for the confirmation.
In such case, it is better to add "19.08" in the subject prefix
so it is explicit from the beginning. Thanks

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-24  8:44     ` Thomas Monjalon
@ 2019-04-24  8:44       ` Thomas Monjalon
  2019-07-04 19:55       ` Thomas Monjalon
  1 sibling, 0 replies; 29+ messages in thread
From: Thomas Monjalon @ 2019-04-24  8:44 UTC (permalink / raw)
  To: Hunt, David, Marcin Hajkowski; +Cc: dev

24/04/2019 10:38, Hunt, David:
> On 22/4/2019 9:36 PM, Thomas Monjalon wrote:
> > 05/04/2019 15:24, Hajkowski:
> >> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> >>
> >> Extend guest channel API to allow bidirectional
> >> communication. Modify power manager host and guest
> >> side to communicate in both directions.
> > This patchset is deferred to 19.08 because of a lack
> > of review.
> >
> > Note: too many librte_power patches are not reviewed.
> 
> 
> Hi Thomas,
> 
>   The four remaining patch sets for power were initially submitted after 
> the v1 deadline, and were not expected to make it into 19.05. We will be 
> sure to review for 19.08.

OK thanks for the confirmation.
In such case, it is better to add "19.08" in the subject prefix
so it is explicit from the beginning. Thanks




^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 0/4] bidirect guest channel
  2019-04-24  8:44     ` Thomas Monjalon
  2019-04-24  8:44       ` Thomas Monjalon
@ 2019-07-04 19:55       ` Thomas Monjalon
  1 sibling, 0 replies; 29+ messages in thread
From: Thomas Monjalon @ 2019-07-04 19:55 UTC (permalink / raw)
  To: Hunt, David; +Cc: dev, Marcin Hajkowski

24/04/2019 10:44, Thomas Monjalon:
> 24/04/2019 10:38, Hunt, David:
> > On 22/4/2019 9:36 PM, Thomas Monjalon wrote:
> > > 05/04/2019 15:24, Hajkowski:
> > >> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> > >>
> > >> Extend guest channel API to allow bidirectional
> > >> communication. Modify power manager host and guest
> > >> side to communicate in both directions.
> > > This patchset is deferred to 19.08 because of a lack
> > > of review.
> > >
> > > Note: too many librte_power patches are not reviewed.
> > 
> > 
> > Hi Thomas,
> > 
> >   The four remaining patch sets for power were initially submitted after 
> > the v1 deadline, and were not expected to make it into 19.05. We will be 
> > sure to review for 19.08.
> 
> OK thanks for the confirmation.
> In such case, it is better to add "19.08" in the subject prefix
> so it is explicit from the beginning. Thanks

There was no more review since April.
I guess it will miss 19.08 as well.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading Hajkowski
  2019-04-05 13:24   ` Hajkowski
@ 2019-09-26 13:00   ` Hunt, David
  2019-09-26 15:53     ` Daly, Lee
  1 sibling, 1 reply; 29+ messages in thread
From: Hunt, David @ 2019-09-26 13:00 UTC (permalink / raw)
  To: 20190402082121.5472-1-marcinx.hajkowski; +Cc: dev, Marcin Hajkowski


On 05/04/2019 14:24, Hajkowski wrote:
> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
>
> Added new experimental API rte_power_guest_channel_receive_msg
> which gives possibility to receive messages send to guest.
>
> Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> ---
>   lib/librte_power/channel_commands.h    |  5 +++
>   lib/librte_power/guest_channel.c       | 60 ++++++++++++++++++++++++++
>   lib/librte_power/guest_channel.h       | 35 +++++++++++++++
>   lib/librte_power/rte_power_version.map |  1 +
>   4 files changed, 101 insertions(+)
>
> diff --git a/lib/librte_power/channel_commands.h b/lib/librte_power/channel_commands.h
> index e7b93a797..33fd53a6d 100644
> --- a/lib/librte_power/channel_commands.h
> +++ b/lib/librte_power/channel_commands.h
> @@ -28,6 +28,11 @@ extern "C" {
>   #define CPU_POWER_SCALE_MIN     4
>   #define CPU_POWER_ENABLE_TURBO  5
>   #define CPU_POWER_DISABLE_TURBO 6
> +
> +/* Generic Power Command Response */
> +#define CPU_POWER_CMD_ACK       1
> +#define CPU_POWER_CMD_NACK      2
> +
>   #define HOURS 24
>   
>   #define MAX_VFS 10
> diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
> index 9cf7d2cb2..888423891 100644
> --- a/lib/librte_power/guest_channel.c
> +++ b/lib/librte_power/guest_channel.c
> @@ -10,6 +10,7 @@
>   #include <fcntl.h>
>   #include <string.h>
>   #include <errno.h>
> +#include <poll.h>
>   
>   
>   #include <rte_log.h>
> @@ -19,6 +20,9 @@
>   
>   #define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
>   
> +/* Timeout for incoming message in milliseconds. */
> +#define TIMEOUT 10
> +
>   static int global_fds[RTE_MAX_LCORE] = { [0 ... RTE_MAX_LCORE-1] = -1 };
>   
>   int
> @@ -125,6 +129,62 @@ int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
>   	return guest_channel_send_msg(pkt, lcore_id);
>   }
>   
> +int power_guest_channel_read_msg(struct channel_packet *pkt,
> +			unsigned int lcore_id)
> +{
> +	int ret;
> +	struct pollfd fds;
> +	void *buffer = pkt;
> +	int buffer_len = sizeof(*pkt);
> +
> +	fds.fd = global_fds[lcore_id];
> +	fds.events = POLLIN;
> +
> +	ret = poll(&fds, 1, TIMEOUT);
> +	if (ret == 0) {
> +		RTE_LOG(DEBUG, GUEST_CHANNEL, "Timeout occurred during poll function.\n");
> +		return -1;
> +	} else if (ret < 0) {
> +		RTE_LOG(ERR, GUEST_CHANNEL, "Error occurred during poll function: %s\n",
> +				strerror(ret));
> +		return -1;
> +	}
> +
> +	if (lcore_id >= RTE_MAX_LCORE) {
> +		RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
> +				lcore_id, RTE_MAX_LCORE-1);
> +		return -1;
> +	}
> +
> +	if (global_fds[lcore_id] < 0) {
> +		RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
> +		return -1;
> +	}
> +
> +	while (buffer_len > 0) {
> +		ret = read(global_fds[lcore_id],
> +				buffer, buffer_len);
> +		if (ret < 0) {
> +			if (errno == EINTR)
> +				continue;
> +			return -1;
> +		}
> +		if (ret == 0) {
> +			RTE_LOG(ERR, GUEST_CHANNEL, "Expected more data, but connection has been closed.\n");
> +			return -1;
> +		}
> +		buffer = (char *)buffer + ret;
> +		buffer_len -= ret;
> +	}
> +
> +	return 0;
> +}
> +
> +int rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
> +			unsigned int lcore_id)
> +{
> +	return power_guest_channel_read_msg(pkt, lcore_id);
> +}
>   
>   void
>   guest_channel_host_disconnect(unsigned int lcore_id)
> diff --git a/lib/librte_power/guest_channel.h b/lib/librte_power/guest_channel.h
> index 373d39898..7c385df39 100644
> --- a/lib/librte_power/guest_channel.h
> +++ b/lib/librte_power/guest_channel.h
> @@ -68,6 +68,41 @@ int guest_channel_send_msg(struct channel_packet *pkt, unsigned int lcore_id);
>   int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
>   			unsigned int lcore_id);
>   
> +/**
> + * Read a message contained in pkt over the Virtio-Serial
> + * from the host endpoint.
> + *
> + * @param pkt
> + *  Pointer to a populated struct channel_packet
> + *
> + * @param lcore_id
> + *  lcore_id.
> + *
> + * @return
> + *  - 0 on success.
> + *  - Negative on error.
> + */
> +int power_guest_channel_read_msg(struct channel_packet *pkt,
> +		unsigned int lcore_id);
> +
> +/**
> + * Receive a message contained in pkt over the Virtio-Serial
> + * from the host endpoint.
> + *
> + * @param pkt
> + *  Pointer to a populated struct channel_packet
> + *
> + * @param lcore_id
> + *  lcore_id.
> + *
> + * @return
> + *  - 0 on success.
> + *  - Negative on error.
> + */
> +int __rte_experimental
> +rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
> +			unsigned int lcore_id);
> +
>   #ifdef __cplusplus
>   }
>   #endif
> diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/rte_power_version.map
> index 042917360..69f5ea3f4 100644
> --- a/lib/librte_power/rte_power_version.map
> +++ b/lib/librte_power/rte_power_version.map
> @@ -44,4 +44,5 @@ EXPERIMENTAL {
>   	rte_power_empty_poll_stat_update;
>   	rte_power_poll_stat_fetch;
>   	rte_power_poll_stat_update;
> +	rte_power_guest_channel_receive_msg;
>   };


I tested this with the later patches in the set, and the acknowledges 
successfully get back to the guest from the host in the form of an Ack 
or Nack for various commands sent from the guest.

Tested-by: David Hunt <david.hunt@intel.com>




^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds Hajkowski
  2019-04-05 13:24   ` Hajkowski
@ 2019-09-26 13:01   ` Hunt, David
  2019-09-26 15:49     ` Daly, Lee
  1 sibling, 1 reply; 29+ messages in thread
From: Hunt, David @ 2019-09-26 13:01 UTC (permalink / raw)
  To: 20190402082121.5472-1-marcinx.hajkowski; +Cc: dev, Marcin Hajkowski


On 05/04/2019 14:24, Hajkowski wrote:
> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
>
> Extend vm_power_guest to check incoming confirmations
> of messages previously sent to host.
>
> Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> ---
>   examples/vm_power_manager/guest_cli/Makefile  |  1 +
>   .../guest_cli/vm_power_cli_guest.c            | 73 +++++++++++++++----
>   2 files changed, 61 insertions(+), 13 deletions(-)
>
> diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
> index e35a68d0f..67cf08193 100644
> --- a/examples/vm_power_manager/guest_cli/Makefile
> +++ b/examples/vm_power_manager/guest_cli/Makefile
> @@ -18,6 +18,7 @@ SRCS-y := main.c vm_power_cli_guest.c parse.c
>   
>   CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
>   CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>   
>   # workaround for a gcc bug with noreturn attribute
>   # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
> index 2d9e7689a..49ed7b208 100644
> --- a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
> +++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
> @@ -27,7 +27,7 @@
>   #define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
>   
>   
> -#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
> +#define RTE_LOGTYPE_GUEST_CLI RTE_LOGTYPE_USER1
>   
>   struct cmd_quit_result {
>   	cmdline_fixed_string_t quit;
> @@ -132,6 +132,32 @@ struct cmd_set_cpu_freq_result {
>   	cmdline_fixed_string_t cmd;
>   };
>   
> +static int
> +check_response_cmd(unsigned int lcore_id, int *result)
> +{
> +	struct channel_packet pkt;
> +	int ret;
> +
> +	ret = rte_power_guest_channel_receive_msg(&pkt, lcore_id);
> +	if (ret < 0)
> +		return -1;
> +
> +	switch (pkt.command) {
> +	case(CPU_POWER_CMD_ACK):
> +		*result = 1;
> +		break;
> +	case(CPU_POWER_CMD_NACK):
> +		*result = 0;
> +		break;
> +	default:
> +		RTE_LOG(ERR, GUEST_CLI,
> +				"Received invalid response from host, expecting ACK/NACK.\n");
> +		return -1;
> +	}
> +
> +	return 0;
> +}
> +
>   static void
>   cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
>   		       __attribute__((unused)) void *data)
> @@ -139,20 +165,31 @@ cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
>   	int ret = -1;
>   	struct cmd_set_cpu_freq_result *res = parsed_result;
>   
> -	if (!strcmp(res->cmd , "up"))
> +	if (!strcmp(res->cmd, "up"))
>   		ret = rte_power_freq_up(res->lcore_id);
> -	else if (!strcmp(res->cmd , "down"))
> +	else if (!strcmp(res->cmd, "down"))
>   		ret = rte_power_freq_down(res->lcore_id);
> -	else if (!strcmp(res->cmd , "min"))
> +	else if (!strcmp(res->cmd, "min"))
>   		ret = rte_power_freq_min(res->lcore_id);
> -	else if (!strcmp(res->cmd , "max"))
> +	else if (!strcmp(res->cmd, "max"))
>   		ret = rte_power_freq_max(res->lcore_id);
>   	else if (!strcmp(res->cmd, "enable_turbo"))
>   		ret = rte_power_freq_enable_turbo(res->lcore_id);
>   	else if (!strcmp(res->cmd, "disable_turbo"))
>   		ret = rte_power_freq_disable_turbo(res->lcore_id);
> -	if (ret != 1)
> +
> +	if (ret != 1) {
>   		cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
> +		return;
> +	}
> +	int result;
> +	ret = check_response_cmd(res->lcore_id, &result);
> +	if (ret < 0) {
> +		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent message received\n");
> +	} else {
> +		cmdline_printf(cl, "%s received for message sent to host.\n",
> +				result == 1 ? "ACK" : "NACK");
> +	}
>   }
>   
>   cmdline_parse_token_string_t cmd_set_cpu_freq =
> @@ -185,16 +222,26 @@ struct cmd_send_policy_result {
>   };
>   
>   static inline int
> -send_policy(struct channel_packet *pkt)
> +send_policy(struct channel_packet *pkt, struct cmdline *cl)
>   {
>   	int ret;
>   
>   	ret = rte_power_guest_channel_send_msg(pkt, 1);
> -	if (ret == 0)
> -		return 1;
> -	RTE_LOG(DEBUG, POWER, "Error sending message: %s\n",
> -			ret > 0 ? strerror(ret) : "channel not connected");
> -	return -1;
> +	if (ret < 0) {
> +		RTE_LOG(ERR, GUEST_CLI, "Error sending message: %s\n",
> +				ret > 0 ? strerror(ret) : "channel not connected");
> +		return -1;
> +	}
> +
> +	int result;
> +	ret = check_response_cmd(1, &result);
> +	if (ret < 0) {
> +		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent policy received\n");
> +	} else {
> +		cmdline_printf(cl, "%s for sent policy received.\n",
> +				result == 1 ? "ACK" : "NACK");
> +	}
> +	return 1;
>   }
>   
>   static void
> @@ -206,7 +253,7 @@ cmd_send_policy_parsed(void *parsed_result, struct cmdline *cl,
>   
>   	if (!strcmp(res->cmd, "now")) {
>   		printf("Sending Policy down now!\n");
> -		ret = send_policy(&policy);
> +		ret = send_policy(&policy, cl);
>   	}
>   	if (ret != 1)
>   		cmdline_printf(cl, "Error sending message: %s\n",



I tested this with the later patches in the set, and the acknowledges 
successfully get back to the guest from the host in the form of an Ack 
or Nack for various commands sent from the guest.

Tested-by: David Hunt <david.hunt@intel.com>





^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest Hajkowski
  2019-04-05 13:24   ` Hajkowski
@ 2019-09-26 13:06   ` Hunt, David
  2019-09-26 15:47     ` Daly, Lee
  1 sibling, 1 reply; 29+ messages in thread
From: Hunt, David @ 2019-09-26 13:06 UTC (permalink / raw)
  To: 20190402082121.5472-1-marcinx.hajkowski; +Cc: dev, Marcin Hajkowski


On 05/04/2019 14:24, Hajkowski wrote:
> From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
>
> Use new guest channel API to send confirmation
> message for received power command.
>
> Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> ---
>   examples/vm_power_manager/channel_monitor.c | 68 +++++++++++++++++++--
>   1 file changed, 62 insertions(+), 6 deletions(-)
>
> diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
> index 7892d75de..ed580b36a 100644
> --- a/examples/vm_power_manager/channel_monitor.c
> +++ b/examples/vm_power_manager/channel_monitor.c
> @@ -627,6 +627,41 @@ apply_policy(struct policy *pol)
>   		apply_workload_profile(pol);
>   }
>   
> +static int
> +write_binary_packet(struct channel_packet *pkt, struct channel_info *chan_info)
> +{
> +	int ret, buffer_len = sizeof(*pkt);
> +	void *buffer = pkt;
> +
> +	if (chan_info->fd < 0) {
> +		RTE_LOG(ERR, CHANNEL_MONITOR, "Channel is not connected\n");
> +		return -1;
> +	}
> +
> +	while (buffer_len > 0) {
> +		ret = write(chan_info->fd, buffer, buffer_len);
> +		if (ret == -1) {
> +			if (errno == EINTR)
> +				continue;
> +			RTE_LOG(ERR, CHANNEL_MONITOR, "Write function failed due to %s.\n",
> +					strerror(errno));
> +			return -1;
> +		}
> +		buffer = (char *)buffer + ret;
> +		buffer_len -= ret;
> +	}
> +	return 0;
> +}
> +
> +static int
> +send_ack_for_received_cmd(struct channel_packet *pkt,
> +		struct channel_info *chan_info,
> +		uint32_t command)
> +{
> +	pkt->command = command;
> +	return write_binary_packet(pkt, chan_info);
> +}
> +
>   static int
>   process_request(struct channel_packet *pkt, struct channel_info *chan_info)
>   {
> @@ -650,33 +685,54 @@ process_request(struct channel_packet *pkt, struct channel_info *chan_info)
>   		RTE_LOG(DEBUG, CHANNEL_MONITOR, "Processing requested cmd for cpu:%d\n",
>   			core_num);
>   
> +		bool valid_unit = true;
> +		int scale_res;
> +
>   		switch (pkt->unit) {
>   		case(CPU_POWER_SCALE_MIN):
> -			power_manager_scale_core_min(core_num);
> +			scale_res = power_manager_scale_core_min(core_num);
>   			break;
>   		case(CPU_POWER_SCALE_MAX):
> -			power_manager_scale_core_max(core_num);
> +			scale_res = power_manager_scale_core_max(core_num);
>   			break;
>   		case(CPU_POWER_SCALE_DOWN):
> -			power_manager_scale_core_down(core_num);
> +			scale_res = power_manager_scale_core_down(core_num);
>   			break;
>   		case(CPU_POWER_SCALE_UP):
> -			power_manager_scale_core_up(core_num);
> +			scale_res = power_manager_scale_core_up(core_num);
>   			break;
>   		case(CPU_POWER_ENABLE_TURBO):
> -			power_manager_enable_turbo_core(core_num);
> +			scale_res = power_manager_enable_turbo_core(core_num);
>   			break;
>   		case(CPU_POWER_DISABLE_TURBO):
> -			power_manager_disable_turbo_core(core_num);
> +			scale_res = power_manager_disable_turbo_core(core_num);
>   			break;
>   		default:
> +			valid_unit = false;
>   			break;
>   		}
> +
> +		if (valid_unit) {
> +			ret = send_ack_for_received_cmd(pkt,
> +					chan_info,
> +					scale_res > 0 ?
> +						CPU_POWER_CMD_ACK :
> +						CPU_POWER_CMD_NACK);
> +			if (ret < 0)
> +				RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
> +		} else
> +			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Unexpected unit type.\n");
> +
>   	}
>   
>   	if (pkt->command == PKT_POLICY) {
>   		RTE_LOG(INFO, CHANNEL_MONITOR, "Processing policy request %s\n",
>   				pkt->vm_name);
> +		int ret = send_ack_for_received_cmd(pkt,
> +				chan_info,
> +				CPU_POWER_CMD_ACK);
> +		if (ret < 0)
> +			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
>   		update_policy(pkt);
>   		policy_is_set = 1;
>   	}

Using the guest_cli sample app in a VM, sending commands to the 
vm_power_manager app on the host, we now have Acks and Nacks coming from 
the host to the VM to conform the execution of the guest requests.

vmpower(guest)> set_cpu_freq 3 down
ACK received for message sent to host.
vmpower(guest)> set_cpu_freq 3 up
ACK received for message sent to host.
vmpower(guest)> set_cpu_freq 3 up
NACK received for message sent to host.

(NACK because we're already at the maxumum frequency)

And in the host vm_power_manager command line, we can see when a guest 
request cannot be processed:
POWER: Turbo is off, frequency can't be scaled up more 31

Patchset looks good functionally.

Tested-by: David Hunt <david.hunt@intel.com>









^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest
  2019-09-26 13:06   ` Hunt, David
@ 2019-09-26 15:47     ` Daly, Lee
  0 siblings, 0 replies; 29+ messages in thread
From: Daly, Lee @ 2019-09-26 15:47 UTC (permalink / raw)
  To: Hunt, David; +Cc: dev, Marcin Hajkowski

> On 05/04/2019 14:24, Hajkowski wrote:
> > From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> >
> > Use new guest channel API to send confirmation message for received
> > power command.
> >
> > Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> > ---
> >   examples/vm_power_manager/channel_monitor.c | 68
> +++++++++++++++++++--
> >   1 file changed, 62 insertions(+), 6 deletions(-)
> >
> > diff --git a/examples/vm_power_manager/channel_monitor.c
> > b/examples/vm_power_manager/channel_monitor.c
> > index 7892d75de..ed580b36a 100644
> > --- a/examples/vm_power_manager/channel_monitor.c
> > +++ b/examples/vm_power_manager/channel_monitor.c


<...>

> 
> Using the guest_cli sample app in a VM, sending commands to the
> vm_power_manager app on the host, we now have Acks and Nacks coming
> from the host to the VM to conform the execution of the guest requests.
> 
> vmpower(guest)> set_cpu_freq 3 down
> ACK received for message sent to host.
> vmpower(guest)> set_cpu_freq 3 up
> ACK received for message sent to host.
> vmpower(guest)> set_cpu_freq 3 up
> NACK received for message sent to host.
> 
> (NACK because we're already at the maxumum frequency)
> 
> And in the host vm_power_manager command line, we can see when a
> guest request cannot be processed:
> POWER: Turbo is off, frequency can't be scaled up more 31
> 
> Patchset looks good functionally.
> 
> Tested-by: David Hunt <david.hunt@intel.com>
 Acked-by: Lee Daly <lee.daly@intel.com>

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds
  2019-09-26 13:01   ` Hunt, David
@ 2019-09-26 15:49     ` Daly, Lee
  0 siblings, 0 replies; 29+ messages in thread
From: Daly, Lee @ 2019-09-26 15:49 UTC (permalink / raw)
  To: Hunt, David; +Cc: dev, Marcin Hajkowski

> On 05/04/2019 14:24, Hajkowski wrote:
> > From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> >
> > Extend vm_power_guest to check incoming confirmations of messages
> > previously sent to host.
> >
> > Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> > ---
> >   examples/vm_power_manager/guest_cli/Makefile  |  1 +
> >   .../guest_cli/vm_power_cli_guest.c            | 73 +++++++++++++++----
> >   2 files changed, 61 insertions(+), 13 deletions(-)
> >
> > diff --git a/examples/vm_power_manager/guest_cli/Makefile
> > b/examples/vm_power_manager/guest_cli/Makefile
> > index e35a68d0f..67cf08193 100644
> > --- a/examples/vm_power_manager/guest_cli/Makefile
> > +++ b/examples/vm_power_manager/guest_cli/Makefile
> > @@ -18,6 +18,7 @@ SRCS-y := main.c vm_power_cli_guest.c parse.c


<...>

> I tested this with the later patches in the set, and the acknowledges
> successfully get back to the guest from the host in the form of an Ack or Nack
> for various commands sent from the guest.
> 
> Tested-by: David Hunt <david.hunt@intel.com>

Acked-by: Lee Daly <lee.daly@intel.com>

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading
  2019-09-26 13:00   ` Hunt, David
@ 2019-09-26 15:53     ` Daly, Lee
  0 siblings, 0 replies; 29+ messages in thread
From: Daly, Lee @ 2019-09-26 15:53 UTC (permalink / raw)
  To: Hunt, David, 20190402082121.5472-1-marcinx.hajkowski
  Cc: dev, Marcin Hajkowski

> On 05/04/2019 14:24, Hajkowski wrote:
> > From: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> >
> > Added new experimental API rte_power_guest_channel_receive_msg
> > which gives possibility to receive messages send to guest.
> >
> > Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
> > ---
> >   lib/librte_power/channel_commands.h    |  5 +++
> >   lib/librte_power/guest_channel.c       | 60 ++++++++++++++++++++++++++
> >   lib/librte_power/guest_channel.h       | 35 +++++++++++++++
> >   lib/librte_power/rte_power_version.map |  1 +
> >   4 files changed, 101 insertions(+)
> >
> > diff --git a/lib/librte_power/channel_commands.h
> > b/lib/librte_power/channel_commands.h


<...>

> > diff --git a/lib/librte_power/rte_power_version.map
> > b/lib/librte_power/rte_power_version.map
> > index 042917360..69f5ea3f4 100644
> > --- a/lib/librte_power/rte_power_version.map
> > +++ b/lib/librte_power/rte_power_version.map
> > @@ -44,4 +44,5 @@ EXPERIMENTAL {
> >   	rte_power_empty_poll_stat_update;
> >   	rte_power_poll_stat_fetch;
> >   	rte_power_poll_stat_update;
> > +	rte_power_guest_channel_receive_msg;
> >   };
Nit Pick, new api should be added in alphabetical order, i.e after "rte_power_empty_poll_stat_update" .

> 
> 
> I tested this with the later patches in the set, and the acknowledges
> successfully get back to the guest from the host in the form of an Ack or Nack
> for various commands sent from the guest.
> 
> Tested-by: David Hunt <david.hunt@intel.com>
> 

Feel free to add my ack after the above minor change. 
Acked-by: Lee Daly <lee.daly@intel.com>

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel
  2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 1/4] power: fix invalid socket indicator value Hajkowski
  2019-04-05 13:24   ` Hajkowski
@ 2019-09-27  8:42   ` Marcin Hajkowski
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 1/4] power: fix invalid socket indicator value Marcin Hajkowski
                       ` (4 more replies)
  1 sibling, 5 replies; 29+ messages in thread
From: Marcin Hajkowski @ 2019-09-27  8:42 UTC (permalink / raw)
  To: david.hunt; +Cc: dev

Extend guest channel API to allow bidirectional communication. Modify power manager host and guest side to communicate in both directions.

---

v6:
* put map file api's in alphabetical order
* fix checkpatch issue around experimental tag

v5:
* enhance logging

v4:
* [vm_power_manager] treat 0 as valid socket id
* [guest_manager] use user level logs
* correct code formatting

v3:
* fix global_fds[lcore_id] comparison to invalid value
* check 0 to verify if read function actually read some data
* define _NACK cmd instead of _NAK
* simplify rte_power_guest_channel_receive_msg func logic

v2:
* send ack only if power operation return positive value
* log diffent error for unexpected incoming command and
  error during ack/nak cmd sending


Marcin Hajkowski (4):
[PATCH v6 1/4] power: fix invalid socket indicator value
[PATCH v6 2/4] power: extend guest channel API for reading
[PATCH v6 3/4] power: process incoming confirmation cmds
[PATCH v6 4/4] power: send confirmation cmd to vm guest


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v6 1/4] power: fix invalid socket indicator value
  2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
@ 2019-09-27  8:42     ` Marcin Hajkowski
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 2/4] power: extend guest channel API for reading Marcin Hajkowski
                       ` (3 subsequent siblings)
  4 siblings, 0 replies; 29+ messages in thread
From: Marcin Hajkowski @ 2019-09-27  8:42 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski, stable

Currently 0 is being used for not connected slot indication.
This is not consistent with linux doc which identifies 0 as valid
(connected) slot, thus modification was done to change it.

Fixes: cd0d5547 ("power: vm communication channels in guest")
Cc: stable@dpdk.org

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
 lib/librte_power/guest_channel.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
index c17ea46b4..9cf7d2cb2 100644
--- a/lib/librte_power/guest_channel.c
+++ b/lib/librte_power/guest_channel.c
@@ -19,7 +19,7 @@
 
 #define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
 
-static int global_fds[RTE_MAX_LCORE];
+static int global_fds[RTE_MAX_LCORE] = { [0 ... RTE_MAX_LCORE-1] = -1 };
 
 int
 guest_channel_host_connect(const char *path, unsigned int lcore_id)
@@ -35,7 +35,7 @@ guest_channel_host_connect(const char *path, unsigned int lcore_id)
 		return -1;
 	}
 	/* check if path is already open */
-	if (global_fds[lcore_id] != 0) {
+	if (global_fds[lcore_id] != -1) {
 		RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is already open with fd %d\n",
 				lcore_id, global_fds[lcore_id]);
 		return -1;
@@ -84,7 +84,7 @@ guest_channel_host_connect(const char *path, unsigned int lcore_id)
 	return 0;
 error:
 	close(fd);
-	global_fds[lcore_id] = 0;
+	global_fds[lcore_id] = -1;
 	return -1;
 }
 
@@ -100,7 +100,7 @@ guest_channel_send_msg(struct channel_packet *pkt, unsigned int lcore_id)
 		return -1;
 	}
 
-	if (global_fds[lcore_id] == 0) {
+	if (global_fds[lcore_id] < 0) {
 		RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
 		return -1;
 	}
@@ -134,8 +134,8 @@ guest_channel_host_disconnect(unsigned int lcore_id)
 				lcore_id, RTE_MAX_LCORE-1);
 		return;
 	}
-	if (global_fds[lcore_id] == 0)
+	if (global_fds[lcore_id] < 0)
 		return;
 	close(global_fds[lcore_id]);
-	global_fds[lcore_id] = 0;
+	global_fds[lcore_id] = -1;
 }
-- 
2.17.1


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v6 2/4] power: extend guest channel API for reading
  2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 1/4] power: fix invalid socket indicator value Marcin Hajkowski
@ 2019-09-27  8:42     ` Marcin Hajkowski
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 3/4] power: process incoming confirmation cmds Marcin Hajkowski
                       ` (2 subsequent siblings)
  4 siblings, 0 replies; 29+ messages in thread
From: Marcin Hajkowski @ 2019-09-27  8:42 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

Added new experimental API rte_power_guest_channel_receive_msg
which gives possibility to receive messages send to guest.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
---
 lib/librte_power/channel_commands.h    |  5 +++
 lib/librte_power/guest_channel.c       | 60 ++++++++++++++++++++++++++
 lib/librte_power/guest_channel.h       | 36 ++++++++++++++++
 lib/librte_power/rte_power_version.map |  1 +
 4 files changed, 102 insertions(+)

diff --git a/lib/librte_power/channel_commands.h b/lib/librte_power/channel_commands.h
index eca8ff70c..d81216b42 100644
--- a/lib/librte_power/channel_commands.h
+++ b/lib/librte_power/channel_commands.h
@@ -25,6 +25,11 @@ extern "C" {
 #define CPU_POWER_SCALE_MIN     4
 #define CPU_POWER_ENABLE_TURBO  5
 #define CPU_POWER_DISABLE_TURBO 6
+
+/* Generic Power Command Response */
+#define CPU_POWER_CMD_ACK       1
+#define CPU_POWER_CMD_NACK      2
+
 #define HOURS 24
 
 #define MAX_VFS 10
diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
index 9cf7d2cb2..888423891 100644
--- a/lib/librte_power/guest_channel.c
+++ b/lib/librte_power/guest_channel.c
@@ -10,6 +10,7 @@
 #include <fcntl.h>
 #include <string.h>
 #include <errno.h>
+#include <poll.h>
 
 
 #include <rte_log.h>
@@ -19,6 +20,9 @@
 
 #define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
 
+/* Timeout for incoming message in milliseconds. */
+#define TIMEOUT 10
+
 static int global_fds[RTE_MAX_LCORE] = { [0 ... RTE_MAX_LCORE-1] = -1 };
 
 int
@@ -125,6 +129,62 @@ int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
 	return guest_channel_send_msg(pkt, lcore_id);
 }
 
+int power_guest_channel_read_msg(struct channel_packet *pkt,
+			unsigned int lcore_id)
+{
+	int ret;
+	struct pollfd fds;
+	void *buffer = pkt;
+	int buffer_len = sizeof(*pkt);
+
+	fds.fd = global_fds[lcore_id];
+	fds.events = POLLIN;
+
+	ret = poll(&fds, 1, TIMEOUT);
+	if (ret == 0) {
+		RTE_LOG(DEBUG, GUEST_CHANNEL, "Timeout occurred during poll function.\n");
+		return -1;
+	} else if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Error occurred during poll function: %s\n",
+				strerror(ret));
+		return -1;
+	}
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+				lcore_id, RTE_MAX_LCORE-1);
+		return -1;
+	}
+
+	if (global_fds[lcore_id] < 0) {
+		RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
+		return -1;
+	}
+
+	while (buffer_len > 0) {
+		ret = read(global_fds[lcore_id],
+				buffer, buffer_len);
+		if (ret < 0) {
+			if (errno == EINTR)
+				continue;
+			return -1;
+		}
+		if (ret == 0) {
+			RTE_LOG(ERR, GUEST_CHANNEL, "Expected more data, but connection has been closed.\n");
+			return -1;
+		}
+		buffer = (char *)buffer + ret;
+		buffer_len -= ret;
+	}
+
+	return 0;
+}
+
+int rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
+			unsigned int lcore_id)
+{
+	return power_guest_channel_read_msg(pkt, lcore_id);
+}
 
 void
 guest_channel_host_disconnect(unsigned int lcore_id)
diff --git a/lib/librte_power/guest_channel.h b/lib/librte_power/guest_channel.h
index 373d39898..61e142289 100644
--- a/lib/librte_power/guest_channel.h
+++ b/lib/librte_power/guest_channel.h
@@ -68,6 +68,42 @@ int guest_channel_send_msg(struct channel_packet *pkt, unsigned int lcore_id);
 int rte_power_guest_channel_send_msg(struct channel_packet *pkt,
 			unsigned int lcore_id);
 
+/**
+ * Read a message contained in pkt over the Virtio-Serial
+ * from the host endpoint.
+ *
+ * @param pkt
+ *  Pointer to a populated struct channel_packet
+ *
+ * @param lcore_id
+ *  lcore_id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int power_guest_channel_read_msg(struct channel_packet *pkt,
+		unsigned int lcore_id);
+
+/**
+ * Receive a message contained in pkt over the Virtio-Serial
+ * from the host endpoint.
+ *
+ * @param pkt
+ *  Pointer to a populated struct channel_packet
+ *
+ * @param lcore_id
+ *  lcore_id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+__rte_experimental
+int
+rte_power_guest_channel_receive_msg(struct channel_packet *pkt,
+			unsigned int lcore_id);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/rte_power_version.map
index 042917360..772983813 100644
--- a/lib/librte_power/rte_power_version.map
+++ b/lib/librte_power/rte_power_version.map
@@ -42,6 +42,7 @@ EXPERIMENTAL {
 	rte_power_empty_poll_stat_free;
 	rte_power_empty_poll_stat_init;
 	rte_power_empty_poll_stat_update;
+	rte_power_guest_channel_receive_msg;
 	rte_power_poll_stat_fetch;
 	rte_power_poll_stat_update;
 };
-- 
2.17.1


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v6 3/4] power: process incoming confirmation cmds
  2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 1/4] power: fix invalid socket indicator value Marcin Hajkowski
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 2/4] power: extend guest channel API for reading Marcin Hajkowski
@ 2019-09-27  8:42     ` Marcin Hajkowski
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 4/4] power: send confirmation cmd to vm guest Marcin Hajkowski
  2019-10-27 18:29     ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Thomas Monjalon
  4 siblings, 0 replies; 29+ messages in thread
From: Marcin Hajkowski @ 2019-09-27  8:42 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

Extend vm_power_guest to check incoming confirmations
of messages previously sent to host.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
---
 examples/vm_power_manager/guest_cli/Makefile  |  1 +
 .../guest_cli/vm_power_cli_guest.c            | 73 +++++++++++++++----
 2 files changed, 61 insertions(+), 13 deletions(-)

diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
index e35a68d0f..67cf08193 100644
--- a/examples/vm_power_manager/guest_cli/Makefile
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -18,6 +18,7 @@ SRCS-y := main.c vm_power_cli_guest.c parse.c
 
 CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
 CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
 
 # workaround for a gcc bug with noreturn attribute
 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
index 78c3aa0a1..cdb241801 100644
--- a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
@@ -27,7 +27,7 @@
 #define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
 
 
-#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_GUEST_CLI RTE_LOGTYPE_USER1
 
 struct cmd_quit_result {
 	cmdline_fixed_string_t quit;
@@ -132,6 +132,32 @@ struct cmd_set_cpu_freq_result {
 	cmdline_fixed_string_t cmd;
 };
 
+static int
+check_response_cmd(unsigned int lcore_id, int *result)
+{
+	struct channel_packet pkt;
+	int ret;
+
+	ret = rte_power_guest_channel_receive_msg(&pkt, lcore_id);
+	if (ret < 0)
+		return -1;
+
+	switch (pkt.command) {
+	case(CPU_POWER_CMD_ACK):
+		*result = 1;
+		break;
+	case(CPU_POWER_CMD_NACK):
+		*result = 0;
+		break;
+	default:
+		RTE_LOG(ERR, GUEST_CLI,
+				"Received invalid response from host, expecting ACK/NACK.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 static void
 cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
 		       __attribute__((unused)) void *data)
@@ -139,20 +165,31 @@ cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
 	int ret = -1;
 	struct cmd_set_cpu_freq_result *res = parsed_result;
 
-	if (!strcmp(res->cmd , "up"))
+	if (!strcmp(res->cmd, "up"))
 		ret = rte_power_freq_up(res->lcore_id);
-	else if (!strcmp(res->cmd , "down"))
+	else if (!strcmp(res->cmd, "down"))
 		ret = rte_power_freq_down(res->lcore_id);
-	else if (!strcmp(res->cmd , "min"))
+	else if (!strcmp(res->cmd, "min"))
 		ret = rte_power_freq_min(res->lcore_id);
-	else if (!strcmp(res->cmd , "max"))
+	else if (!strcmp(res->cmd, "max"))
 		ret = rte_power_freq_max(res->lcore_id);
 	else if (!strcmp(res->cmd, "enable_turbo"))
 		ret = rte_power_freq_enable_turbo(res->lcore_id);
 	else if (!strcmp(res->cmd, "disable_turbo"))
 		ret = rte_power_freq_disable_turbo(res->lcore_id);
-	if (ret != 1)
+
+	if (ret != 1) {
 		cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
+		return;
+	}
+	int result;
+	ret = check_response_cmd(res->lcore_id, &result);
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent message received\n");
+	} else {
+		cmdline_printf(cl, "%s received for message sent to host.\n",
+				result == 1 ? "ACK" : "NACK");
+	}
 }
 
 cmdline_parse_token_string_t cmd_set_cpu_freq =
@@ -185,16 +222,26 @@ struct cmd_send_policy_result {
 };
 
 static inline int
-send_policy(struct channel_packet *pkt)
+send_policy(struct channel_packet *pkt, struct cmdline *cl)
 {
 	int ret;
 
 	ret = rte_power_guest_channel_send_msg(pkt, 1);
-	if (ret == 0)
-		return 1;
-	RTE_LOG(DEBUG, POWER, "Error sending message: %s\n",
-			ret > 0 ? strerror(ret) : "channel not connected");
-	return -1;
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "Error sending message: %s\n",
+				ret > 0 ? strerror(ret) : "channel not connected");
+		return -1;
+	}
+
+	int result;
+	ret = check_response_cmd(1, &result);
+	if (ret < 0) {
+		RTE_LOG(ERR, GUEST_CLI, "No confirmation for sent policy received\n");
+	} else {
+		cmdline_printf(cl, "%s for sent policy received.\n",
+				result == 1 ? "ACK" : "NACK");
+	}
+	return 1;
 }
 
 static void
@@ -206,7 +253,7 @@ cmd_send_policy_parsed(void *parsed_result, struct cmdline *cl,
 
 	if (!strcmp(res->cmd, "now")) {
 		printf("Sending Policy down now!\n");
-		ret = send_policy(&policy);
+		ret = send_policy(&policy, cl);
 	}
 	if (ret != 1)
 		cmdline_printf(cl, "Error sending message: %s\n",
-- 
2.17.1


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [dpdk-dev] [PATCH v6 4/4] power: send confirmation cmd to vm guest
  2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
                       ` (2 preceding siblings ...)
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 3/4] power: process incoming confirmation cmds Marcin Hajkowski
@ 2019-09-27  8:42     ` Marcin Hajkowski
  2019-10-27 18:29     ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Thomas Monjalon
  4 siblings, 0 replies; 29+ messages in thread
From: Marcin Hajkowski @ 2019-09-27  8:42 UTC (permalink / raw)
  To: david.hunt; +Cc: dev, Marcin Hajkowski

Use new guest channel API to send confirmation
message for received power command.

Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
---
 examples/vm_power_manager/channel_monitor.c | 68 +++++++++++++++++++--
 1 file changed, 62 insertions(+), 6 deletions(-)

diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
index fe6088a18..0c73fac55 100644
--- a/examples/vm_power_manager/channel_monitor.c
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -671,6 +671,41 @@ apply_policy(struct policy *pol)
 		apply_workload_profile(pol);
 }
 
+static int
+write_binary_packet(struct channel_packet *pkt, struct channel_info *chan_info)
+{
+	int ret, buffer_len = sizeof(*pkt);
+	void *buffer = pkt;
+
+	if (chan_info->fd < 0) {
+		RTE_LOG(ERR, CHANNEL_MONITOR, "Channel is not connected\n");
+		return -1;
+	}
+
+	while (buffer_len > 0) {
+		ret = write(chan_info->fd, buffer, buffer_len);
+		if (ret == -1) {
+			if (errno == EINTR)
+				continue;
+			RTE_LOG(ERR, CHANNEL_MONITOR, "Write function failed due to %s.\n",
+					strerror(errno));
+			return -1;
+		}
+		buffer = (char *)buffer + ret;
+		buffer_len -= ret;
+	}
+	return 0;
+}
+
+static int
+send_ack_for_received_cmd(struct channel_packet *pkt,
+		struct channel_info *chan_info,
+		uint32_t command)
+{
+	pkt->command = command;
+	return write_binary_packet(pkt, chan_info);
+}
+
 static int
 process_request(struct channel_packet *pkt, struct channel_info *chan_info)
 {
@@ -694,33 +729,54 @@ process_request(struct channel_packet *pkt, struct channel_info *chan_info)
 		RTE_LOG(DEBUG, CHANNEL_MONITOR, "Processing requested cmd for cpu:%d\n",
 			core_num);
 
+		bool valid_unit = true;
+		int scale_res;
+
 		switch (pkt->unit) {
 		case(CPU_POWER_SCALE_MIN):
-			power_manager_scale_core_min(core_num);
+			scale_res = power_manager_scale_core_min(core_num);
 			break;
 		case(CPU_POWER_SCALE_MAX):
-			power_manager_scale_core_max(core_num);
+			scale_res = power_manager_scale_core_max(core_num);
 			break;
 		case(CPU_POWER_SCALE_DOWN):
-			power_manager_scale_core_down(core_num);
+			scale_res = power_manager_scale_core_down(core_num);
 			break;
 		case(CPU_POWER_SCALE_UP):
-			power_manager_scale_core_up(core_num);
+			scale_res = power_manager_scale_core_up(core_num);
 			break;
 		case(CPU_POWER_ENABLE_TURBO):
-			power_manager_enable_turbo_core(core_num);
+			scale_res = power_manager_enable_turbo_core(core_num);
 			break;
 		case(CPU_POWER_DISABLE_TURBO):
-			power_manager_disable_turbo_core(core_num);
+			scale_res = power_manager_disable_turbo_core(core_num);
 			break;
 		default:
+			valid_unit = false;
 			break;
 		}
+
+		if (valid_unit) {
+			ret = send_ack_for_received_cmd(pkt,
+					chan_info,
+					scale_res > 0 ?
+						CPU_POWER_CMD_ACK :
+						CPU_POWER_CMD_NACK);
+			if (ret < 0)
+				RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
+		} else
+			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Unexpected unit type.\n");
+
 	}
 
 	if (pkt->command == PKT_POLICY) {
 		RTE_LOG(INFO, CHANNEL_MONITOR, "Processing policy request %s\n",
 				pkt->vm_name);
+		int ret = send_ack_for_received_cmd(pkt,
+				chan_info,
+				CPU_POWER_CMD_ACK);
+		if (ret < 0)
+			RTE_LOG(DEBUG, CHANNEL_MONITOR, "Error during sending ack command.\n");
 		update_policy(pkt);
 		policy_is_set = 1;
 	}
-- 
2.17.1


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel
  2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
                       ` (3 preceding siblings ...)
  2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 4/4] power: send confirmation cmd to vm guest Marcin Hajkowski
@ 2019-10-27 18:29     ` Thomas Monjalon
  4 siblings, 0 replies; 29+ messages in thread
From: Thomas Monjalon @ 2019-10-27 18:29 UTC (permalink / raw)
  To: Marcin Hajkowski; +Cc: dev, david.hunt

27/09/2019 10:42, Marcin Hajkowski:
> Marcin Hajkowski (4):
> [PATCH v6 1/4] power: fix invalid socket indicator value
> [PATCH v6 2/4] power: extend guest channel API for reading
> [PATCH v6 3/4] power: process incoming confirmation cmds
> [PATCH v6 4/4] power: send confirmation cmd to vm guest

Applied, thanks




^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, other threads:[~2019-10-27 18:29 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-05 13:24 [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Hajkowski
2019-04-05 13:24 ` Hajkowski
2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 1/4] power: fix invalid socket indicator value Hajkowski
2019-04-05 13:24   ` Hajkowski
2019-09-27  8:42   ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Marcin Hajkowski
2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 1/4] power: fix invalid socket indicator value Marcin Hajkowski
2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 2/4] power: extend guest channel API for reading Marcin Hajkowski
2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 3/4] power: process incoming confirmation cmds Marcin Hajkowski
2019-09-27  8:42     ` [dpdk-dev] [PATCH v6 4/4] power: send confirmation cmd to vm guest Marcin Hajkowski
2019-10-27 18:29     ` [dpdk-dev] [PATCH v6 0/4] bidirectional guest channel Thomas Monjalon
2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 2/4] power: extend guest channel API for reading Hajkowski
2019-04-05 13:24   ` Hajkowski
2019-09-26 13:00   ` Hunt, David
2019-09-26 15:53     ` Daly, Lee
2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 3/4] power: process incoming confirmation cmds Hajkowski
2019-04-05 13:24   ` Hajkowski
2019-09-26 13:01   ` Hunt, David
2019-09-26 15:49     ` Daly, Lee
2019-04-05 13:24 ` [dpdk-dev] [PATCH v5 4/4] power: send confirmation cmd to vm guest Hajkowski
2019-04-05 13:24   ` Hajkowski
2019-09-26 13:06   ` Hunt, David
2019-09-26 15:47     ` Daly, Lee
2019-04-22 20:36 ` [dpdk-dev] [PATCH v5 0/4] bidirect guest channel Thomas Monjalon
2019-04-22 20:36   ` Thomas Monjalon
2019-04-24  8:38   ` Hunt, David
2019-04-24  8:38     ` Hunt, David
2019-04-24  8:44     ` Thomas Monjalon
2019-04-24  8:44       ` Thomas Monjalon
2019-07-04 19:55       ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).