DPDK patches and discussions
 help / color / mirror / Atom feed
From: Marcin Baran <marcinx.baran@intel.com>
To: dev@dpdk.org
Cc: Marcin Baran <marcinx.baran@intel.com>,
	Pawel Modrak <pawelx.modrak@intel.com>
Subject: [dpdk-dev] [PATCH v5 3/6] examples/ioat: add rawdev copy mode support
Date: Fri, 20 Sep 2019 09:37:11 +0200	[thread overview]
Message-ID: <20190920073714.1314-4-marcinx.baran@intel.com> (raw)
In-Reply-To: <20190920073714.1314-1-marcinx.baran@intel.com>

Added support for copying packets using
rawdev device. Each port's Rx queue is
assigned DMA channel for copy.

Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
---
 examples/ioat/ioatfwd.c | 236 ++++++++++++++++++++++++++++++++--------
 1 file changed, 189 insertions(+), 47 deletions(-)

diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 3a092c6cf..c66ce7e49 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -121,6 +121,50 @@ pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
 		rte_pktmbuf_mtod(src, char *), src->data_len);
 }
 
+static uint32_t
+ioat_enqueue_packets(struct rte_mbuf **pkts,
+	uint32_t nb_rx, uint16_t dev_id)
+{
+	int ret;
+	uint32_t i;
+	struct rte_mbuf *pkts_copy[MAX_PKT_BURST];
+
+	const uint64_t addr_offset = RTE_PTR_DIFF(pkts[0]->buf_addr,
+		&pkts[0]->rearm_data);
+
+	ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+		(void *)pkts_copy, nb_rx);
+
+	if (unlikely(ret < 0))
+		rte_exit(EXIT_FAILURE, "Unable to allocate memory.\n");
+
+	for (i = 0; i < nb_rx; i++) {
+		/* Perform data copy */
+		ret = rte_ioat_enqueue_copy(dev_id,
+			pkts[i]->buf_iova
+			- addr_offset,
+			pkts_copy[i]->buf_iova
+			- addr_offset,
+			rte_pktmbuf_data_len(pkts[i])
+			+ addr_offset,
+			(uintptr_t)pkts[i],
+			(uintptr_t)pkts_copy[i],
+			0 /* nofence */);
+
+		if (ret != 1)
+			break;
+	}
+
+	ret = i;
+	/* Free any not enqueued packets. */
+	rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts[i], nb_rx - i);
+	rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts_copy[i],
+		nb_rx - i);
+
+
+	return ret;
+}
+
 /* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. */
 static void
 ioat_rx_port(struct rxtx_port_config *rx_config)
@@ -136,32 +180,40 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
 		if (nb_rx == 0)
 			continue;
 
-		/* Perform packet software copy, free source packets */
-		int ret;
-		struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
-
-		ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
-			(void *)pkts_burst_copy, nb_rx);
-
-		if (unlikely(ret < 0))
-			rte_exit(EXIT_FAILURE,
-				"Unable to allocate memory.\n");
-
-		for (j = 0; j < nb_rx; j++)
-			pktmbuf_sw_copy(pkts_burst[j],
-				pkts_burst_copy[j]);
-
-		rte_mempool_put_bulk(ioat_pktmbuf_pool,
-			(void *)pkts_burst, nb_rx);
-
-		nb_enq = rte_ring_enqueue_burst(
-			rx_config->rx_to_tx_ring,
-			(void *)pkts_burst_copy, nb_rx, NULL);
-
-		/* Free any not enqueued packets. */
-		rte_mempool_put_bulk(ioat_pktmbuf_pool,
-			(void *)&pkts_burst_copy[nb_enq],
-			nb_rx - nb_enq);
+		if (copy_mode == COPY_MODE_IOAT_NUM) {
+			/* Perform packet hardware copy */
+			nb_enq = ioat_enqueue_packets(pkts_burst,
+				nb_rx, rx_config->ioat_ids[i]);
+			if (nb_enq > 0)
+				rte_ioat_do_copies(rx_config->ioat_ids[i]);
+		} else {
+			/* Perform packet software copy, free source packets */
+			int ret;
+			struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
+
+			ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+				(void *)pkts_burst_copy, nb_rx);
+
+			if (unlikely(ret < 0))
+				rte_exit(EXIT_FAILURE,
+					"Unable to allocate memory.\n");
+
+			for (j = 0; j < nb_rx; j++)
+				pktmbuf_sw_copy(pkts_burst[j],
+					pkts_burst_copy[j]);
+
+			rte_mempool_put_bulk(ioat_pktmbuf_pool,
+				(void *)pkts_burst, nb_rx);
+
+			nb_enq = rte_ring_enqueue_burst(
+				rx_config->rx_to_tx_ring,
+				(void *)pkts_burst_copy, nb_rx, NULL);
+
+			/* Free any not enqueued packets. */
+			rte_mempool_put_bulk(ioat_pktmbuf_pool,
+				(void *)&pkts_burst_copy[nb_enq],
+				nb_rx - nb_enq);
+		}
 	}
 }
 
@@ -169,31 +221,64 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
 static void
 ioat_tx_port(struct rxtx_port_config *tx_config)
 {
-	uint32_t i, nb_dq = 0;
+	uint32_t i, j, nb_dq = 0;
+	struct rte_mbuf *mbufs_src[MAX_PKT_BURST];
 	struct rte_mbuf *mbufs_dst[MAX_PKT_BURST];
 
-	/* Deque the mbufs from rx_to_tx_ring. */
-	nb_dq = rte_ring_dequeue_burst(tx_config->rx_to_tx_ring,
-		(void *)mbufs_dst, MAX_PKT_BURST, NULL);
+	if (copy_mode == COPY_MODE_IOAT_NUM) {
+		/* Deque the mbufs from IOAT device. */
+		for (i = 0; i < tx_config->nb_queues; i++) {
+			nb_dq = rte_ioat_completed_copies(
+				tx_config->ioat_ids[i], MAX_PKT_BURST,
+				(void *)mbufs_src, (void *)mbufs_dst);
 
-	if (nb_dq == 0)
-		return;
+			if (nb_dq == 0)
+				break;
 
-	/* Update macs if enabled */
-	if (mac_updating) {
-		for (i = 0; i < nb_dq; i++)
-			update_mac_addrs(mbufs_dst[i],
-				tx_config->rxtx_port);
-	}
+			rte_mempool_put_bulk(ioat_pktmbuf_pool,
+				(void *)mbufs_src, nb_dq);
 
-	const uint16_t nb_tx = rte_eth_tx_burst(tx_config->rxtx_port,
-		0, (void *)mbufs_dst, nb_dq);
+			/* Update macs if enabled */
+			if (mac_updating) {
+				for (j = 0; j < nb_dq; j++)
+					update_mac_addrs(mbufs_dst[j],
+						tx_config->rxtx_port);
+			}
+
+			const uint16_t nb_tx = rte_eth_tx_burst(
+				tx_config->rxtx_port, 0,
+				(void *)mbufs_dst, nb_dq);
 
-	/* Free any unsent packets. */
-	if (unlikely(nb_tx < nb_dq))
-		rte_mempool_put_bulk(ioat_pktmbuf_pool,
-		(void *)&mbufs_dst[nb_tx],
-			nb_dq - nb_tx);
+			/* Free any unsent packets. */
+			if (unlikely(nb_tx < nb_dq))
+				rte_mempool_put_bulk(ioat_pktmbuf_pool,
+				(void *)&mbufs_dst[nb_tx],
+					nb_dq - nb_tx);
+		}
+	} else {
+		/* Deque the mbufs from rx_to_tx_ring. */
+		nb_dq = rte_ring_dequeue_burst(tx_config->rx_to_tx_ring,
+			(void *)mbufs_dst, MAX_PKT_BURST, NULL);
+
+		if (nb_dq == 0)
+			return;
+
+		/* Update macs if enabled */
+		if (mac_updating) {
+			for (i = 0; i < nb_dq; i++)
+				update_mac_addrs(mbufs_dst[i],
+					tx_config->rxtx_port);
+		}
+
+		const uint16_t nb_tx = rte_eth_tx_burst(tx_config->rxtx_port,
+			0, (void *)mbufs_dst, nb_dq);
+
+		/* Free any unsent packets. */
+		if (unlikely(nb_tx < nb_dq))
+			rte_mempool_put_bulk(ioat_pktmbuf_pool,
+			(void *)&mbufs_dst[nb_tx],
+				nb_dq - nb_tx);
+	}
 }
 
 /* Main rx and tx loop if only one slave lcore available */
@@ -389,6 +474,52 @@ check_link_status(uint32_t port_mask)
 	return retval;
 }
 
+static void
+configure_rawdev_queue(uint32_t dev_id)
+{
+	struct rte_ioat_rawdev_config dev_config = { .ring_size = ring_size };
+	struct rte_rawdev_info info = { .dev_private = &dev_config };
+
+	if (rte_rawdev_configure(dev_id, &info) != 0) {
+		rte_exit(EXIT_FAILURE,
+			"Error with rte_rawdev_configure()\n");
+	}
+	if (rte_rawdev_start(dev_id) != 0) {
+		rte_exit(EXIT_FAILURE,
+			"Error with rte_rawdev_start()\n");
+	}
+}
+
+static void
+assign_rawdevs(void)
+{
+	uint16_t nb_rawdev = 0, rdev_id = 0;
+	uint32_t i, j;
+
+	for (i = 0; i < cfg.nb_ports; i++) {
+		for (j = 0; j < cfg.ports[i].nb_queues; j++) {
+			struct rte_rawdev_info rdev_info = { 0 };
+
+			do {
+				if (rdev_id == rte_rawdev_count())
+					goto end;
+				rte_rawdev_info_get(rdev_id++, &rdev_info);
+			} while (strcmp(rdev_info.driver_name,
+				IOAT_PMD_RAWDEV_NAME_STR) != 0);
+
+			cfg.ports[i].ioat_ids[j] = rdev_id - 1;
+			configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
+			++nb_rawdev;
+		}
+	}
+end:
+	if (nb_rawdev < cfg.nb_ports * cfg.ports[0].nb_queues)
+		rte_exit(EXIT_FAILURE,
+			"Not enough IOAT rawdevs (%u) for all queues (%u).\n",
+			nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
+	RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
+}
+
 static void
 assign_rings(void)
 {
@@ -585,18 +716,29 @@ main(int argc, char **argv)
 		rte_exit(EXIT_FAILURE,
 			"There should be at least one slave lcore.\n");
 
-	assign_rings();
+	if (copy_mode == COPY_MODE_IOAT_NUM)
+		assign_rawdevs();
+	else /* copy_mode == COPY_MODE_SW_NUM */
+		assign_rings();
 
 	start_forwarding_cores();
 
 	/* force_quit is true when we get here */
 	rte_eal_mp_wait_lcore();
 
+	uint32_t j;
 	for (i = 0; i < cfg.nb_ports; i++) {
 		printf("Closing port %d\n", cfg.ports[i].rxtx_port);
 		rte_eth_dev_stop(cfg.ports[i].rxtx_port);
 		rte_eth_dev_close(cfg.ports[i].rxtx_port);
-		rte_ring_free(cfg.ports[i].rx_to_tx_ring);
+		if (copy_mode == COPY_MODE_IOAT_NUM) {
+			for (j = 0; j < cfg.ports[i].nb_queues; j++) {
+				printf("Stopping rawdev %d\n",
+					cfg.ports[i].ioat_ids[j]);
+				rte_rawdev_stop(cfg.ports[i].ioat_ids[j]);
+			}
+		} else /* copy_mode == COPY_MODE_SW_NUM */
+			rte_ring_free(cfg.ports[i].rx_to_tx_ring);
 	}
 
 	printf("Bye...\n");
-- 
2.22.0.windows.1


  parent reply	other threads:[~2019-09-20  7:39 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-09  8:29 [dpdk-dev] [PATCH] examples/ioat: create sample app on ioat driver usage Marcin Baran
2019-09-09 13:12 ` Aaron Conole
2019-09-09 13:58   ` Bruce Richardson
2019-09-12  9:52 ` Bruce Richardson
2019-09-12 12:18   ` Baran, MarcinX
2019-09-13 14:39 ` [dpdk-dev] [PATCH v2 0/6] examples/ioat: " Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 1/6] examples/ioat: create " Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-13 18:45   ` [dpdk-dev] [PATCH v2 0/6] examples/ioat: sample app on ioat driver usage Aaron Conole
2019-09-16  9:42     ` Baran, MarcinX
2019-09-19  9:19       ` Aaron Conole
2019-09-18  9:11   ` [dpdk-dev] [PATCH v3 " Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 1/6] examples/ioat: create " Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-19  9:38     ` [dpdk-dev] [PATCH v4 0/6] examples/ioat: sample app on ioat driver usage Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 1/6] examples/ioat: create " Marcin Baran
2019-09-19 14:44         ` Bruce Richardson
2019-09-19 14:46           ` Baran, MarcinX
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-20  7:37       ` [dpdk-dev] [PATCH v5 0/6] examples/ioat: sample app on ioat driver usage Marcin Baran
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 1/6] examples/ioat: create " Marcin Baran
2019-09-27  9:58           ` Bruce Richardson
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-27 10:01           ` Bruce Richardson
2019-09-27 14:01             ` Baran, MarcinX
2019-09-20  7:37         ` Marcin Baran [this message]
2019-09-27 10:05           ` [dpdk-dev] [PATCH v5 3/6] examples/ioat: add rawdev copy mode support Bruce Richardson
2019-09-27 14:03             ` Baran, MarcinX
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-27 10:08           ` Bruce Richardson
2019-09-27 14:03             ` Baran, MarcinX
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-27 10:12           ` Bruce Richardson
2019-09-27 14:04             ` Baran, MarcinX
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-27 10:36           ` Bruce Richardson
2019-09-27 14:14             ` Baran, MarcinX
2019-09-27 10:37           ` Bruce Richardson
2019-09-27 11:01           ` Bruce Richardson
2019-09-27 14:51             ` Baran, MarcinX
2019-09-27 15:00               ` Bruce Richardson
2019-09-27 15:16                 ` Baran, MarcinX
2019-09-27 13:22           ` Bruce Richardson
2019-09-27 15:13             ` Baran, MarcinX
2019-09-30  7:50         ` [dpdk-dev] [PATCH v6 0/6] examples/ioat: sample app on ioat driver usage Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 1/6] examples/ioat: create " Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-10-03  9:48           ` [dpdk-dev] [PATCH v6 0/6] examples/ioat: sample app on ioat driver usage Bruce Richardson
2019-10-04 17:16           ` Kevin Traynor
2019-10-07 11:10             ` Bruce Richardson
2019-10-07 11:08         ` [dpdk-dev] [PATCH v7 0/6] examples/ioat: sample app for ioat driver Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 1/6] examples/ioat: new " Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 2/6] examples/ioat: add software copy support Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 3/6] examples/ioat: add rawdev copy mode support Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 4/6] examples/ioat: add two threads configuration Bruce Richardson
2019-10-27 17:04             ` Thomas Monjalon
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 5/6] examples/ioat: add stats printing for each port Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 6/6] doc/guides/: provide IOAT sample app guide Bruce Richardson
2019-10-27 17:07             ` Thomas Monjalon
2019-10-27 17:07           ` [dpdk-dev] [PATCH v7 0/6] examples/ioat: sample app for ioat driver Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190920073714.1314-4-marcinx.baran@intel.com \
    --to=marcinx.baran@intel.com \
    --cc=dev@dpdk.org \
    --cc=pawelx.modrak@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).