DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nithin Dabilpuram <nithind1988@gmail.com>
To: Jasvinder Singh <jasvinder.singh@intel.com>,
	Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	Ferruh Yigit <ferruh.yigit@intel.com>,
	Andrew Rybchenko <arybchenko@solarflare.com>
Cc: dev@dpdk.org, jerinj@marvell.com, kkanas@marvell.com,
	Nithin Dabilpuram <ndabilpuram@marvell.com>
Subject: [dpdk-dev] [PATCH v3 1/4] ethdev: add tm support for shaper config in pkt mode
Date: Wed, 22 Apr 2020 13:35:09 +0530	[thread overview]
Message-ID: <20200422080509.10510-1-nithind1988@gmail.com> (raw)
In-Reply-To: <20200330160019.29674-1-ndabilpuram@marvell.com>

From: Nithin Dabilpuram <ndabilpuram@marvell.com>

Some NIC hardware support shaper to work in packet mode i.e
shaping or ratelimiting traffic is in packets per second (PPS) as
opposed to default bytes per second (BPS). Hence this patch
adds support to configure shared or private shaper in packet mode,
provide rate in PPS and add related tm capabilities in port/level/node
capability structures.

This patch also updates tm port/level/node capability structures with
exiting features of scheduler wfq packet mode, scheduler wfq byte mode
and private/shared shaper byte mode.

SoftNIC PMD is also updated with new capabilities.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
---

v2..v3:
- Fix typo's
- Add shaper_shared_(packet, byte)_mode_supported in level and node cap
- Fix comment in pkt_length_adjust.
- Move rte_eth_softnic_tm.c capability update to patch 1/4 to 
  avoid compilations issues in node and level cap array in softnicpmd.
  ../drivers/net/softnic/rte_eth_softnic_tm.c:782:3: warning: braces around scalar initializer
   {.nonleaf = {
  ../drivers/net/softnic/rte_eth_softnic_tm.c:782:3: note: (near initialization for ‘tm_node_cap[0].shaper_shared_byte_mode_supported’)
  ../drivers/net/softnic/rte_eth_softnic_tm.c:782:4: error: field name not in record or union initializer
   {.nonleaf = {

v1..v2:
- Add seperate capability for shaper and scheduler pktmode and bytemode.
- Add packet_mode field in struct rte_tm_shaper_params to indicate
packet mode shaper profile.


 drivers/net/softnic/rte_eth_softnic_tm.c |  65 ++++++++++
 lib/librte_ethdev/rte_tm.h               | 196 ++++++++++++++++++++++++++++++-
 2 files changed, 259 insertions(+), 2 deletions(-)

diff --git a/drivers/net/softnic/rte_eth_softnic_tm.c b/drivers/net/softnic/rte_eth_softnic_tm.c
index 80a470c..344819f 100644
--- a/drivers/net/softnic/rte_eth_softnic_tm.c
+++ b/drivers/net/softnic/rte_eth_softnic_tm.c
@@ -447,6 +447,8 @@ static const struct rte_tm_capabilities tm_cap = {
 	.shaper_private_dual_rate_n_max = 0,
 	.shaper_private_rate_min = 1,
 	.shaper_private_rate_max = UINT32_MAX,
+	.shaper_private_packet_mode_supported = 0,
+	.shaper_private_byte_mode_supported = 1,
 
 	.shaper_shared_n_max = UINT32_MAX,
 	.shaper_shared_n_nodes_per_shaper_max = UINT32_MAX,
@@ -454,6 +456,8 @@ static const struct rte_tm_capabilities tm_cap = {
 	.shaper_shared_dual_rate_n_max = 0,
 	.shaper_shared_rate_min = 1,
 	.shaper_shared_rate_max = UINT32_MAX,
+	.shaper_shared_packet_mode_supported = 0,
+	.shaper_shared_byte_mode_supported = 1,
 
 	.shaper_pkt_length_adjust_min = RTE_TM_ETH_FRAMING_OVERHEAD_FCS,
 	.shaper_pkt_length_adjust_max = RTE_TM_ETH_FRAMING_OVERHEAD_FCS,
@@ -463,6 +467,8 @@ static const struct rte_tm_capabilities tm_cap = {
 	.sched_wfq_n_children_per_group_max = UINT32_MAX,
 	.sched_wfq_n_groups_max = 1,
 	.sched_wfq_weight_max = UINT32_MAX,
+	.sched_wfq_packet_mode_supported = 0,
+	.sched_wfq_byte_mode_supported = 1,
 
 	.cman_wred_packet_mode_supported = WRED_SUPPORTED,
 	.cman_wred_byte_mode_supported = 0,
@@ -548,13 +554,19 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 			.shaper_private_dual_rate_supported = 0,
 			.shaper_private_rate_min = 1,
 			.shaper_private_rate_max = UINT32_MAX,
+			.shaper_private_packet_mode_supported = 0,
+			.shaper_private_byte_mode_supported = 1,
 			.shaper_shared_n_max = 0,
+			.shaper_shared_packet_mode_supported = 0,
+			.shaper_shared_byte_mode_supported = 0,
 
 			.sched_n_children_max = UINT32_MAX,
 			.sched_sp_n_priorities_max = 1,
 			.sched_wfq_n_children_per_group_max = UINT32_MAX,
 			.sched_wfq_n_groups_max = 1,
 			.sched_wfq_weight_max = 1,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 0,
 
 			.stats_mask = STATS_MASK_DEFAULT,
 		} },
@@ -572,7 +584,11 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 			.shaper_private_dual_rate_supported = 0,
 			.shaper_private_rate_min = 1,
 			.shaper_private_rate_max = UINT32_MAX,
+			.shaper_private_packet_mode_supported = 0,
+			.shaper_private_byte_mode_supported = 1,
 			.shaper_shared_n_max = 0,
+			.shaper_shared_packet_mode_supported = 0,
+			.shaper_shared_byte_mode_supported = 0,
 
 			.sched_n_children_max = UINT32_MAX,
 			.sched_sp_n_priorities_max = 1,
@@ -580,9 +596,14 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 			.sched_wfq_n_groups_max = 1,
 #ifdef RTE_SCHED_SUBPORT_TC_OV
 			.sched_wfq_weight_max = UINT32_MAX,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 1,
 #else
 			.sched_wfq_weight_max = 1,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 0,
 #endif
+
 			.stats_mask = STATS_MASK_DEFAULT,
 		} },
 	},
@@ -599,7 +620,11 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 			.shaper_private_dual_rate_supported = 0,
 			.shaper_private_rate_min = 1,
 			.shaper_private_rate_max = UINT32_MAX,
+			.shaper_private_packet_mode_supported = 0,
+			.shaper_private_byte_mode_supported = 1,
 			.shaper_shared_n_max = 0,
+			.shaper_shared_packet_mode_supported = 0,
+			.shaper_shared_byte_mode_supported = 0,
 
 			.sched_n_children_max =
 				RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE,
@@ -608,6 +633,8 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 			.sched_wfq_n_children_per_group_max = 1,
 			.sched_wfq_n_groups_max = 0,
 			.sched_wfq_weight_max = 1,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 0,
 
 			.stats_mask = STATS_MASK_DEFAULT,
 		} },
@@ -625,7 +652,11 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 			.shaper_private_dual_rate_supported = 0,
 			.shaper_private_rate_min = 1,
 			.shaper_private_rate_max = UINT32_MAX,
+			.shaper_private_packet_mode_supported = 0,
+			.shaper_private_byte_mode_supported = 1,
 			.shaper_shared_n_max = 1,
+			.shaper_shared_packet_mode_supported = 0,
+			.shaper_shared_byte_mode_supported = 1,
 
 			.sched_n_children_max =
 				RTE_SCHED_BE_QUEUES_PER_PIPE,
@@ -634,6 +665,8 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 				RTE_SCHED_BE_QUEUES_PER_PIPE,
 			.sched_wfq_n_groups_max = 1,
 			.sched_wfq_weight_max = UINT32_MAX,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 1,
 
 			.stats_mask = STATS_MASK_DEFAULT,
 		} },
@@ -651,7 +684,11 @@ static const struct rte_tm_level_capabilities tm_level_cap[] = {
 			.shaper_private_dual_rate_supported = 0,
 			.shaper_private_rate_min = 0,
 			.shaper_private_rate_max = 0,
+			.shaper_private_packet_mode_supported = 0,
+			.shaper_private_byte_mode_supported = 0,
 			.shaper_shared_n_max = 0,
+			.shaper_shared_packet_mode_supported = 0,
+			.shaper_shared_byte_mode_supported = 0,
 
 			.cman_head_drop_supported = 0,
 			.cman_wred_packet_mode_supported = WRED_SUPPORTED,
@@ -736,7 +773,11 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 		.shaper_private_dual_rate_supported = 0,
 		.shaper_private_rate_min = 1,
 		.shaper_private_rate_max = UINT32_MAX,
+		.shaper_private_packet_mode_supported = 0,
+		.shaper_private_byte_mode_supported = 1,
 		.shaper_shared_n_max = 0,
+		.shaper_shared_packet_mode_supported = 0,
+		.shaper_shared_byte_mode_supported = 0,
 
 		{.nonleaf = {
 			.sched_n_children_max = UINT32_MAX,
@@ -744,6 +785,8 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 			.sched_wfq_n_children_per_group_max = UINT32_MAX,
 			.sched_wfq_n_groups_max = 1,
 			.sched_wfq_weight_max = 1,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 0,
 		} },
 
 		.stats_mask = STATS_MASK_DEFAULT,
@@ -754,7 +797,11 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 		.shaper_private_dual_rate_supported = 0,
 		.shaper_private_rate_min = 1,
 		.shaper_private_rate_max = UINT32_MAX,
+		.shaper_private_packet_mode_supported = 0,
+		.shaper_private_byte_mode_supported = 1,
 		.shaper_shared_n_max = 0,
+		.shaper_shared_packet_mode_supported = 0,
+		.shaper_shared_byte_mode_supported = 0,
 
 		{.nonleaf = {
 			.sched_n_children_max = UINT32_MAX,
@@ -762,6 +809,8 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 			.sched_wfq_n_children_per_group_max = UINT32_MAX,
 			.sched_wfq_n_groups_max = 1,
 			.sched_wfq_weight_max = UINT32_MAX,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 0,
 		} },
 
 		.stats_mask = STATS_MASK_DEFAULT,
@@ -772,7 +821,11 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 		.shaper_private_dual_rate_supported = 0,
 		.shaper_private_rate_min = 1,
 		.shaper_private_rate_max = UINT32_MAX,
+		.shaper_private_packet_mode_supported = 0,
+		.shaper_private_byte_mode_supported = 1,
 		.shaper_shared_n_max = 0,
+		.shaper_shared_packet_mode_supported = 0,
+		.shaper_shared_byte_mode_supported = 0,
 
 		{.nonleaf = {
 			.sched_n_children_max =
@@ -782,6 +835,8 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 			.sched_wfq_n_children_per_group_max = 1,
 			.sched_wfq_n_groups_max = 0,
 			.sched_wfq_weight_max = 1,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 0,
 		} },
 
 		.stats_mask = STATS_MASK_DEFAULT,
@@ -792,7 +847,11 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 		.shaper_private_dual_rate_supported = 0,
 		.shaper_private_rate_min = 1,
 		.shaper_private_rate_max = UINT32_MAX,
+		.shaper_private_packet_mode_supported = 0,
+		.shaper_private_byte_mode_supported = 1,
 		.shaper_shared_n_max = 1,
+		.shaper_shared_packet_mode_supported = 0,
+		.shaper_shared_byte_mode_supported = 1,
 
 		{.nonleaf = {
 			.sched_n_children_max =
@@ -802,6 +861,8 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 				RTE_SCHED_BE_QUEUES_PER_PIPE,
 			.sched_wfq_n_groups_max = 1,
 			.sched_wfq_weight_max = UINT32_MAX,
+			.sched_wfq_packet_mode_supported = 0,
+			.sched_wfq_byte_mode_supported = 1,
 		} },
 
 		.stats_mask = STATS_MASK_DEFAULT,
@@ -812,7 +873,11 @@ static const struct rte_tm_node_capabilities tm_node_cap[] = {
 		.shaper_private_dual_rate_supported = 0,
 		.shaper_private_rate_min = 0,
 		.shaper_private_rate_max = 0,
+		.shaper_private_packet_mode_supported = 0,
+		.shaper_private_byte_mode_supported = 0,
 		.shaper_shared_n_max = 0,
+		.shaper_shared_packet_mode_supported = 0,
+		.shaper_shared_byte_mode_supported = 0,
 
 
 		{.leaf = {
diff --git a/lib/librte_ethdev/rte_tm.h b/lib/librte_ethdev/rte_tm.h
index f9c0cf3..b3865af 100644
--- a/lib/librte_ethdev/rte_tm.h
+++ b/lib/librte_ethdev/rte_tm.h
@@ -250,6 +250,23 @@ struct rte_tm_capabilities {
 	 */
 	uint64_t shaper_private_rate_max;
 
+	/** Shaper private packet mode supported. When non-zero, this parameter
+	 * indicates that there is at least one node that can be configured
+	 * with packet mode in it's private shaper. When shaper is configured
+	 * in packet mode, committed/peak rate provided is interpreted
+	 * in packets per second.
+	 */
+	int shaper_private_packet_mode_supported;
+
+	/** Shaper private byte mode supported. When non-zero, this parameter
+	 * indicates that there is at least one node that can be configured
+	 * with byte mode in it's private shaper. When shaper is configured
+	 * in byte mode, committed/peak rate provided is interpreted in
+	 * bytes per second.
+	 */
+	int shaper_private_byte_mode_supported;
+
+
 	/** Maximum number of shared shapers. The value of zero indicates that
 	 * shared shapers are not supported.
 	 */
@@ -284,6 +301,21 @@ struct rte_tm_capabilities {
 	 */
 	uint64_t shaper_shared_rate_max;
 
+	/** Shaper shared packet mode supported. When non-zero, this parameter
+	 * indicates a shared shaper can be configured with packet mode.
+	 * When shared shaper is configured in packet mode, committed/peak rate
+	 * provided is interpreted in packets per second.
+	 */
+	int shaper_shared_packet_mode_supported;
+
+	/** Shaper shared byte mode supported. When non-zero, this parameter
+	 * indicates that a shared shaper can be configured with byte mode.
+	 * When shared shaper is configured in byte mode, committed/peak rate
+	 * provided is interpreted in bytes per second.
+	 */
+	int shaper_shared_byte_mode_supported;
+
+
 	/** Minimum value allowed for packet length adjustment for any private
 	 * or shared shaper.
 	 */
@@ -339,6 +371,22 @@ struct rte_tm_capabilities {
 	 */
 	uint32_t sched_wfq_weight_max;
 
+	/** WFQ packet mode supported. When non-zero, this parameter indicates
+	 * that there is at least one non-leaf node that supports packet mode
+	 * for WFQ among it's children. WFQ weights will be applied against
+	 * packet count for scheduling children when a non-leaf node
+	 * is configured appropriately.
+	 */
+	int sched_wfq_packet_mode_supported;
+
+	/** WFQ byte mode supported. When non-zero, this parameter indicates
+	 * that there is at least one non-leaf node that supports byte mode
+	 * for WFQ among it's children. WFQ weights will be applied against
+	 * bytes for scheduling children when a non-leaf node is configured
+	 * appropriately.
+	 */
+	int sched_wfq_byte_mode_supported;
+
 	/** WRED packet mode support. When non-zero, this parameter indicates
 	 * that there is at least one leaf node that supports the WRED packet
 	 * mode, which might not be true for all the leaf nodes. In packet
@@ -485,6 +533,24 @@ struct rte_tm_level_capabilities {
 			 */
 			uint64_t shaper_private_rate_max;
 
+			/** Shaper private packet mode supported. When non-zero,
+			 * this parameter indicates there is at least one
+			 * non-leaf node at this level that can be configured
+			 * with packet mode in it's private shaper. When private
+			 * shaper is configured in packet mode, committed/peak
+			 * rate provided is interpreted in packets per second.
+			 */
+			int shaper_private_packet_mode_supported;
+
+			/** Shaper private byte mode supported. When non-zero,
+			 * this parameter indicates there is at least one
+			 * non-leaf node at this level that can be configured
+			 * with byte mode in it's private shaper. When private
+			 * shaper is configured in byte mode, committed/peak
+			 * rate provided is interpreted in bytes per second.
+			 */
+			int shaper_private_byte_mode_supported;
+
 			/** Maximum number of shared shapers that any non-leaf
 			 * node on this level can be part of. The value of zero
 			 * indicates that shared shapers are not supported by
@@ -495,6 +561,20 @@ struct rte_tm_level_capabilities {
 			 */
 			uint32_t shaper_shared_n_max;
 
+			/** Shaper shared packet mode supported. When non-zero,
+			 * this parameter indicates that there is at least one
+			 * non-leaf node on this level that can be part of
+			 * shared shapers which work in packet mode.
+			 */
+			int shaper_shared_packet_mode_supported;
+
+			/** Shaper shared byte mode supported. When non-zero,
+			 * this parameter indicates that there is at least one
+			 * non-leaf node on this level that can be part of
+			 * shared shapers which work in byte mode.
+			 */
+			int shaper_shared_byte_mode_supported;
+
 			/** Maximum number of children nodes. This parameter
 			 * indicates that there is at least one non-leaf node on
 			 * this level that can be configured with this many
@@ -554,6 +634,25 @@ struct rte_tm_level_capabilities {
 			 */
 			uint32_t sched_wfq_weight_max;
 
+			/** WFQ packet mode supported. When non-zero, this
+			 * parameter indicates that there is at least one
+			 * non-leaf node at this level that supports packet
+			 * mode for WFQ among it's children. WFQ weights will
+			 * be applied against packet count for scheduling
+			 * children when a non-leaf node is configured
+			 * appropriately.
+			 */
+			int sched_wfq_packet_mode_supported;
+
+			/** WFQ byte mode supported. When non-zero, this
+			 * parameter indicates that there is at least one
+			 * non-leaf node at this level that supports byte
+			 * mode for WFQ among it's children. WFQ weights will
+			 * be applied against bytes for scheduling children
+			 * when a non-leaf node is configured appropriately.
+			 */
+			int sched_wfq_byte_mode_supported;
+
 			/** Mask of statistics counter types supported by the
 			 * non-leaf nodes on this level. Every supported
 			 * statistics counter type is supported by at least one
@@ -596,6 +695,24 @@ struct rte_tm_level_capabilities {
 			 */
 			uint64_t shaper_private_rate_max;
 
+			/** Shaper private packet mode supported. When non-zero,
+			 * this parameter indicates there is at least one leaf
+			 * node at this level that can be configured with
+			 * packet mode in it's private shaper. When private
+			 * shaper is configured in packet mode, committed/peak
+			 * rate provided is interpreted in packets per second.
+			 */
+			int shaper_private_packet_mode_supported;
+
+			/** Shaper private byte mode supported. When non-zero,
+			 * this parameter indicates there is at least one leaf
+			 * node at this level that can be configured with
+			 * byte mode in it's private shaper. When private shaper
+			 * is configured in byte mode, committed/peak rate
+			 * provided is interpreted in bytes per second.
+			 */
+			int shaper_private_byte_mode_supported;
+
 			/** Maximum number of shared shapers that any leaf node
 			 * on this level can be part of. The value of zero
 			 * indicates that shared shapers are not supported by
@@ -606,6 +723,20 @@ struct rte_tm_level_capabilities {
 			 */
 			uint32_t shaper_shared_n_max;
 
+			/** Shaper shared packet mode supported. When non-zero,
+			 * this parameter indicates that there is at least one
+			 * leaf node on this level that can be part of
+			 * shared shapers which work in packet mode.
+			 */
+			int shaper_shared_packet_mode_supported;
+
+			/** Shaper shared byte mode supported. When non-zero,
+			 * this parameter indicates that there is at least one
+			 * leaf node on this level that can be part of
+			 * shared shapers which work in byte mode.
+			 */
+			int shaper_shared_byte_mode_supported;
+
 			/** WRED packet mode support. When non-zero, this
 			 * parameter indicates that there is at least one leaf
 			 * node on this level that supports the WRED packet
@@ -686,12 +817,38 @@ struct rte_tm_node_capabilities {
 	 */
 	uint64_t shaper_private_rate_max;
 
+	/** Shaper private packet mode supported. When non-zero, this parameter
+	 * indicates private shaper of current node can be configured with
+	 * packet mode. When configured in packet mode, committed/peak rate
+	 * provided is interpreted in packets per second.
+	 */
+	int shaper_private_packet_mode_supported;
+
+	/** Shaper private byte mode supported. When non-zero, this parameter
+	 * indicates private shaper of current node can be configured with
+	 * byte mode. When configured in byte mode, committed/peak rate
+	 * provided is interpreted in bytes per second.
+	 */
+	int shaper_private_byte_mode_supported;
+
 	/** Maximum number of shared shapers the current node can be part of.
 	 * The value of zero indicates that shared shapers are not supported by
 	 * the current node.
 	 */
 	uint32_t shaper_shared_n_max;
 
+	/** Shaper shared packet mode supported. When non-zero,
+	 * this parameter indicates that current node can be part of
+	 * shared shapers which work in packet mode.
+	 */
+	int shaper_shared_packet_mode_supported;
+
+	/** Shaper shared byte mode supported. When non-zero,
+	 * this parameter indicates that current node can be part of
+	 * shared shapers which work in byte mode.
+	 */
+	int shaper_shared_byte_mode_supported;
+
 	RTE_STD_C11
 	union {
 		/** Items valid only for non-leaf nodes. */
@@ -735,6 +892,23 @@ struct rte_tm_node_capabilities {
 			 * WFQ weight, so WFQ is reduced to FQ.
 			 */
 			uint32_t sched_wfq_weight_max;
+
+			/** WFQ packet mode supported. When non-zero, this
+			 * parameter indicates that current node supports packet
+			 * mode for WFQ among it's children. WFQ weights will be
+			 * applied against packet count for scheduling children
+			 * when configured appropriately.
+			 */
+			int sched_wfq_packet_mode_supported;
+
+			/** WFQ byte mode supported. When non-zero, this
+			 * parameter indicates that current node supports byte
+			 * mode for WFQ among it's children. WFQ weights will be
+			 * applied against  bytes for scheduling children when
+			 * configured appropriately.
+			 */
+			int sched_wfq_byte_mode_supported;
+
 		} nonleaf;
 
 		/** Items valid only for leaf nodes. */
@@ -836,10 +1010,10 @@ struct rte_tm_wred_params {
  * Token bucket
  */
 struct rte_tm_token_bucket {
-	/** Token bucket rate (bytes per second) */
+	/** Token bucket rate (bytes per second or packets per second) */
 	uint64_t rate;
 
-	/** Token bucket size (bytes), a.k.a. max burst size */
+	/** Token bucket size (bytes or packets), a.k.a. max burst size */
 	uint64_t size;
 };
 
@@ -860,6 +1034,11 @@ struct rte_tm_token_bucket {
  * Dual rate shapers use both the committed and the peak token buckets. The
  * rate of the peak bucket has to be bigger than zero, as well as greater than
  * or equal to the rate of the committed bucket.
+ *
+ * @see struct rte_tm_capabilities::shaper_private_packet_mode_supported
+ * @see struct rte_tm_capabilities::shaper_private_byte_mode_supported
+ * @see struct rte_tm_capabilities::shaper_shared_packet_mode_supported
+ * @see struct rte_tm_capabilities::shaper_shared_byte_mode_supported
  */
 struct rte_tm_shaper_params {
 	/** Committed token bucket */
@@ -872,8 +1051,19 @@ struct rte_tm_shaper_params {
 	 * purpose of shaping. Can be used to correct the packet length with
 	 * the framing overhead bytes that are also consumed on the wire (e.g.
 	 * RTE_TM_ETH_FRAMING_OVERHEAD_FCS).
+	 * This field is ignored when the profile enables packet mode.
 	 */
 	int32_t pkt_length_adjust;
+
+	/** When zero, the private or shared shaper that is associated to this
+	 * profile works in byte mode and hence *rate* and *size* fields in
+	 * both token bucket configurations are specified in bytes per second
+	 * and bytes respectively.
+	 * When non-zero, that private or shared shaper works in packet mode and
+	 * hence *rate* and *size* fields in both token bucket configurations
+	 * are specified in packets per second and packets respectively.
+	 */
+	int packet_mode;
 };
 
 /**
@@ -925,6 +1115,8 @@ struct rte_tm_node_params {
 			 * When non-NULL, it points to a pre-allocated array of
 			 * *n_sp_priorities* values, with non-zero value for
 			 * byte-mode and zero for packet-mode.
+			 * @see struct rte_tm_node_capabilities::sched_wfq_packet_mode_supported
+			 * @see struct rte_tm_node_capabilities::sched_wfq_byte_mode_supported
 			 */
 			int *wfq_weight_mode;
 
-- 
2.8.4


  parent reply	other threads:[~2020-04-22  8:05 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-30 16:00 [dpdk-dev] [PATCH 1/2] ethdev: add tm cap for private shaper packet mode Nithin Dabilpuram
2020-03-30 16:00 ` [dpdk-dev] [PATCH 2/2] app/testpmd: add tm non leaf node pktmode command Nithin Dabilpuram
2020-04-07  7:30 ` [dpdk-dev] [PATCH 1/2] ethdev: add tm cap for private shaper packet mode Nithin Dabilpuram
2020-04-07 16:31 ` Dumitrescu, Cristian
2020-04-07 17:21   ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-10 11:45     ` Dumitrescu, Cristian
2020-04-10 11:56       ` Nithin Dabilpuram
2020-04-11 11:44 ` [dpdk-dev] [PATCH v2 1/4] ethdev: add tm support for shaper config in pkt mode Nithin Dabilpuram
2020-04-11 11:44   ` [dpdk-dev] [PATCH v2 2/4] drivers/net: update tm capability for existing pmds Nithin Dabilpuram
2020-04-11 11:44   ` [dpdk-dev] [PATCH v2 3/4] app/testpmd: add tm cmd for non leaf and shaper pktmode Nithin Dabilpuram
2020-04-11 11:44   ` [dpdk-dev] [PATCH v2 4/4] net/octeontx2: support tm length adjust and pkt mode Nithin Dabilpuram
2020-04-16 13:48   ` [dpdk-dev] [PATCH v2 1/4] ethdev: add tm support for shaper config in " Ferruh Yigit
2020-04-21  5:11     ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-21  9:30   ` [dpdk-dev] " Dumitrescu, Cristian
2020-04-21  9:58     ` Nithin Dabilpuram
2020-04-21 10:23       ` Dumitrescu, Cristian
2020-04-21 11:55         ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-22  7:59 ` [dpdk-dev] [PATCH v3] " Nithin Dabilpuram
2020-04-22  7:59   ` [dpdk-dev] [PATCH v3 2/4] drivers/net: update tm capability for existing pmds Nithin Dabilpuram
2020-04-22  7:59   ` [dpdk-dev] [PATCH v3 3/4] app/testpmd: add tm cmd for non leaf and shaper pktmode Nithin Dabilpuram
2020-04-22  7:59   ` [dpdk-dev] [PATCH v3 4/4] net/octeontx2: support tm length adjust and pkt mode Nithin Dabilpuram
2020-04-22  8:09   ` [dpdk-dev] [PATCH v3] ethdev: add tm support for shaper config in " Nithin Dabilpuram
2020-04-22 12:18     ` Singh, Jasvinder
2020-04-22 17:21       ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-22 10:10   ` [dpdk-dev] " Dumitrescu, Cristian
2020-04-22 11:31     ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-22 11:49       ` Nithin Dabilpuram
2020-04-22 11:59         ` Dumitrescu, Cristian
2020-04-22 12:01       ` Dumitrescu, Cristian
2020-04-22  8:05 ` Nithin Dabilpuram [this message]
2020-04-22 17:21 ` [dpdk-dev] [PATCH v4 1/4] " Nithin Dabilpuram
2020-04-22 17:21   ` [dpdk-dev] [PATCH v4 2/4] drivers/net: update tm capability for existing pmds Nithin Dabilpuram
2020-04-22 17:21   ` [dpdk-dev] [PATCH v4 3/4] app/testpmd: add tm cmd for non leaf and shaper pktmode Nithin Dabilpuram
2020-04-22 17:21   ` [dpdk-dev] [PATCH v4 4/4] net/octeontx2: support tm length adjust and pkt mode Nithin Dabilpuram
2020-04-24 10:28   ` [dpdk-dev] [PATCH v4 1/4] ethdev: add tm support for shaper config in " Dumitrescu, Cristian
2020-04-25 20:09     ` Ferruh Yigit
2020-04-27  9:19       ` Dumitrescu, Cristian
2020-04-27 16:12         ` Ferruh Yigit
2020-04-27 16:28           ` Dumitrescu, Cristian
2020-04-28 15:30             ` Thomas Monjalon
2020-04-28 17:35               ` Dumitrescu, Cristian
2020-04-27 16:29           ` Jerin Jacob
2020-04-27 16:49             ` Ferruh Yigit
2020-04-27 16:59               ` Jerin Jacob
2020-04-28 11:51                 ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-28 13:56                   ` Ferruh Yigit
2020-04-28 14:06                 ` [dpdk-dev] " Ferruh Yigit
2020-04-28 14:45                   ` Bruce Richardson
2020-04-28 15:04                     ` Luca Boccassi
2020-04-28 15:54                       ` Thomas Monjalon
2020-04-29  8:45                         ` Dumitrescu, Cristian
2020-04-29  9:03                           ` Bruce Richardson
2020-05-01 10:27                             ` Ferruh Yigit
2020-05-01 13:16                               ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-08-25 16:59                                 ` Ferruh Yigit
2020-09-07 11:12                                   ` Nithin Dabilpuram
2020-09-14 13:01                                     ` Ferruh Yigit
2020-05-01 13:18                         ` [dpdk-dev] " Jerin Jacob
2020-05-05  8:01                           ` Ray Kinsella
2020-04-28 15:42                     ` Ray Kinsella

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200422080509.10510-1-nithind1988@gmail.com \
    --to=nithind1988@gmail.com \
    --cc=arybchenko@solarflare.com \
    --cc=cristian.dumitrescu@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jasvinder.singh@intel.com \
    --cc=jerinj@marvell.com \
    --cc=kkanas@marvell.com \
    --cc=ndabilpuram@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).