DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nithin Dabilpuram <nithind1988@gmail.com>
To: Jerin Jacob <jerinj@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	Kiran Kumar K <kirankumark@marvell.com>
Cc: dev@dpdk.org, kkanas@marvell.com
Subject: [dpdk-dev] [PATCH v4 4/4] net/octeontx2: support tm length adjust and pkt mode
Date: Wed, 22 Apr 2020 22:51:04 +0530	[thread overview]
Message-ID: <20200422172104.23099-4-nithind1988@gmail.com> (raw)
In-Reply-To: <20200422172104.23099-1-nithind1988@gmail.com>

From: Nithin Dabilpuram <ndabilpuram@marvell.com>

This patch adds support to packet length adjust TM feature
for private shaper. It also adds support to packet mode
feature that applies both to private shaper and node DWRR
scheduling of SP children.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
---

v3..v4:
- No change.

v2..v3:
- No change.

v1..v2:
- Newly included patch.

 drivers/net/octeontx2/otx2_tm.c | 140 +++++++++++++++++++++++++++++++++-------
 drivers/net/octeontx2/otx2_tm.h |   5 ++
 2 files changed, 122 insertions(+), 23 deletions(-)

diff --git a/drivers/net/octeontx2/otx2_tm.c b/drivers/net/octeontx2/otx2_tm.c
index f94618d..fa7d21b 100644
--- a/drivers/net/octeontx2/otx2_tm.c
+++ b/drivers/net/octeontx2/otx2_tm.c
@@ -336,18 +336,25 @@ prepare_tm_shaper_reg(struct otx2_nix_tm_node *tm_node,
 {
 	struct shaper_params cir, pir;
 	uint32_t schq = tm_node->hw_id;
+	uint64_t adjust = 0;
 	uint8_t k = 0;
 
 	memset(&cir, 0, sizeof(cir));
 	memset(&pir, 0, sizeof(pir));
 	shaper_config_to_nix(profile, &cir, &pir);
 
-	otx2_tm_dbg("Shaper config node %s(%u) lvl %u id %u, "
-		    "pir %" PRIu64 "(%" PRIu64 "B),"
-		     " cir %" PRIu64 "(%" PRIu64 "B) (%p)",
-		     nix_hwlvl2str(tm_node->hw_lvl), schq, tm_node->lvl,
-		     tm_node->id, pir.rate, pir.burst,
-		     cir.rate, cir.burst, tm_node);
+	/* Packet length adjust */
+	if (tm_node->pkt_mode)
+		adjust = 1;
+	else if (profile)
+		adjust = profile->params.pkt_length_adjust & 0x1FF;
+
+	otx2_tm_dbg("Shaper config node %s(%u) lvl %u id %u, pir %" PRIu64
+		    "(%" PRIu64 "B), cir %" PRIu64 "(%" PRIu64 "B)"
+		    "adjust 0x%" PRIx64 "(pktmode %u) (%p)",
+		    nix_hwlvl2str(tm_node->hw_lvl), schq, tm_node->lvl,
+		    tm_node->id, pir.rate, pir.burst, cir.rate, cir.burst,
+		    adjust, tm_node->pkt_mode, tm_node);
 
 	switch (tm_node->hw_lvl) {
 	case NIX_TXSCH_LVL_SMQ:
@@ -364,7 +371,9 @@ prepare_tm_shaper_reg(struct otx2_nix_tm_node *tm_node,
 
 		/* Configure RED ALG */
 		reg[k] = NIX_AF_MDQX_SHAPE(schq);
-		regval[k] = ((uint64_t)tm_node->red_algo << 9);
+		regval[k] = (adjust |
+			     (uint64_t)tm_node->red_algo << 9 |
+			     (uint64_t)tm_node->pkt_mode << 24);
 		k++;
 		break;
 	case NIX_TXSCH_LVL_TL4:
@@ -381,7 +390,9 @@ prepare_tm_shaper_reg(struct otx2_nix_tm_node *tm_node,
 
 		/* Configure RED algo */
 		reg[k] = NIX_AF_TL4X_SHAPE(schq);
-		regval[k] = ((uint64_t)tm_node->red_algo << 9);
+		regval[k] = (adjust |
+			     (uint64_t)tm_node->red_algo << 9 |
+			     (uint64_t)tm_node->pkt_mode << 24);
 		k++;
 		break;
 	case NIX_TXSCH_LVL_TL3:
@@ -398,7 +409,9 @@ prepare_tm_shaper_reg(struct otx2_nix_tm_node *tm_node,
 
 		/* Configure RED algo */
 		reg[k] = NIX_AF_TL3X_SHAPE(schq);
-		regval[k] = ((uint64_t)tm_node->red_algo << 9);
+		regval[k] = (adjust |
+			     (uint64_t)tm_node->red_algo << 9 |
+			     (uint64_t)tm_node->pkt_mode << 24);
 		k++;
 
 		break;
@@ -416,7 +429,9 @@ prepare_tm_shaper_reg(struct otx2_nix_tm_node *tm_node,
 
 		/* Configure RED algo */
 		reg[k] = NIX_AF_TL2X_SHAPE(schq);
-		regval[k] = ((uint64_t)tm_node->red_algo << 9);
+		regval[k] = (adjust |
+			     (uint64_t)tm_node->red_algo << 9 |
+			     (uint64_t)tm_node->pkt_mode << 24);
 		k++;
 
 		break;
@@ -426,6 +441,12 @@ prepare_tm_shaper_reg(struct otx2_nix_tm_node *tm_node,
 		regval[k] = (cir.rate && cir.burst) ?
 				(shaper2regval(&cir) | 1) : 0;
 		k++;
+
+		/* Configure length disable and adjust */
+		reg[k] = NIX_AF_TL1X_SHAPE(schq);
+		regval[k] = (adjust |
+			     (uint64_t)tm_node->pkt_mode << 24);
+		k++;
 		break;
 	}
 
@@ -773,6 +794,15 @@ nix_tm_node_add_to_list(struct otx2_eth_dev *dev, uint32_t node_id,
 	tm_node->flags = 0;
 	if (user)
 		tm_node->flags = NIX_TM_NODE_USER;
+
+	/* Packet mode */
+	if (!nix_tm_is_leaf(dev, lvl) &&
+	    ((profile && profile->params.packet_mode) ||
+	     (params->nonleaf.wfq_weight_mode &&
+	      params->nonleaf.n_sp_priorities &&
+	      !params->nonleaf.wfq_weight_mode[0])))
+		tm_node->pkt_mode = 1;
+
 	rte_memcpy(&tm_node->params, params, sizeof(struct rte_tm_node_params));
 
 	if (profile)
@@ -1873,8 +1903,10 @@ otx2_nix_tm_capa_get(struct rte_eth_dev *eth_dev,
 	cap->shaper_private_dual_rate_n_max = max_nr_nodes;
 	cap->shaper_private_rate_min = MIN_SHAPER_RATE / 8;
 	cap->shaper_private_rate_max = MAX_SHAPER_RATE / 8;
-	cap->shaper_pkt_length_adjust_min = 0;
-	cap->shaper_pkt_length_adjust_max = 0;
+	cap->shaper_private_packet_mode_supported = 1;
+	cap->shaper_private_byte_mode_supported = 1;
+	cap->shaper_pkt_length_adjust_min = NIX_LENGTH_ADJUST_MIN;
+	cap->shaper_pkt_length_adjust_max = NIX_LENGTH_ADJUST_MAX;
 
 	/* Schedule Capabilities */
 	cap->sched_n_children_max = rsp->schq[NIX_TXSCH_LVL_MDQ];
@@ -1882,6 +1914,8 @@ otx2_nix_tm_capa_get(struct rte_eth_dev *eth_dev,
 	cap->sched_wfq_n_children_per_group_max = cap->sched_n_children_max;
 	cap->sched_wfq_n_groups_max = 1;
 	cap->sched_wfq_weight_max = MAX_SCHED_WEIGHT;
+	cap->sched_wfq_packet_mode_supported = 1;
+	cap->sched_wfq_byte_mode_supported = 1;
 
 	cap->dynamic_update_mask =
 		RTE_TM_UPDATE_NODE_PARENT_KEEP_LEVEL |
@@ -1944,12 +1978,16 @@ otx2_nix_tm_level_capa_get(struct rte_eth_dev *eth_dev, uint32_t lvl,
 			nix_tm_have_tl1_access(dev) ? false : true;
 		cap->nonleaf.shaper_private_rate_min = MIN_SHAPER_RATE / 8;
 		cap->nonleaf.shaper_private_rate_max = MAX_SHAPER_RATE / 8;
+		cap->nonleaf.shaper_private_packet_mode_supported = 1;
+		cap->nonleaf.shaper_private_byte_mode_supported = 1;
 
 		cap->nonleaf.sched_n_children_max = rsp->schq[hw_lvl - 1];
 		cap->nonleaf.sched_sp_n_priorities_max =
 					nix_max_prio(dev, hw_lvl) + 1;
 		cap->nonleaf.sched_wfq_n_groups_max = 1;
 		cap->nonleaf.sched_wfq_weight_max = MAX_SCHED_WEIGHT;
+		cap->nonleaf.sched_wfq_packet_mode_supported = 1;
+		cap->nonleaf.sched_wfq_byte_mode_supported = 1;
 
 		if (nix_tm_have_tl1_access(dev))
 			cap->nonleaf.stats_mask =
@@ -1966,6 +2004,8 @@ otx2_nix_tm_level_capa_get(struct rte_eth_dev *eth_dev, uint32_t lvl,
 		cap->nonleaf.shaper_private_dual_rate_supported = true;
 		cap->nonleaf.shaper_private_rate_min = MIN_SHAPER_RATE / 8;
 		cap->nonleaf.shaper_private_rate_max = MAX_SHAPER_RATE / 8;
+		cap->nonleaf.shaper_private_packet_mode_supported = 1;
+		cap->nonleaf.shaper_private_byte_mode_supported = 1;
 
 		/* MDQ doesn't support Strict Priority */
 		if (hw_lvl == NIX_TXSCH_LVL_MDQ)
@@ -1977,6 +2017,8 @@ otx2_nix_tm_level_capa_get(struct rte_eth_dev *eth_dev, uint32_t lvl,
 			nix_max_prio(dev, hw_lvl) + 1;
 		cap->nonleaf.sched_wfq_n_groups_max = 1;
 		cap->nonleaf.sched_wfq_weight_max = MAX_SCHED_WEIGHT;
+		cap->nonleaf.sched_wfq_packet_mode_supported = 1;
+		cap->nonleaf.sched_wfq_byte_mode_supported = 1;
 	} else {
 		/* unsupported level */
 		error->type = RTE_TM_ERROR_TYPE_UNSPECIFIED;
@@ -2029,6 +2071,8 @@ otx2_nix_tm_node_capa_get(struct rte_eth_dev *eth_dev, uint32_t node_id,
 		(hw_lvl == NIX_TXSCH_LVL_TL1) ? false : true;
 	cap->shaper_private_rate_min = MIN_SHAPER_RATE / 8;
 	cap->shaper_private_rate_max = MAX_SHAPER_RATE / 8;
+	cap->shaper_private_packet_mode_supported = 1;
+	cap->shaper_private_byte_mode_supported = 1;
 
 	/* Non Leaf Scheduler */
 	if (hw_lvl == NIX_TXSCH_LVL_MDQ)
@@ -2041,6 +2085,8 @@ otx2_nix_tm_node_capa_get(struct rte_eth_dev *eth_dev, uint32_t node_id,
 		cap->nonleaf.sched_n_children_max;
 	cap->nonleaf.sched_wfq_n_groups_max = 1;
 	cap->nonleaf.sched_wfq_weight_max = MAX_SCHED_WEIGHT;
+	cap->nonleaf.sched_wfq_packet_mode_supported = 1;
+	cap->nonleaf.sched_wfq_byte_mode_supported = 1;
 
 	if (hw_lvl == NIX_TXSCH_LVL_TL1)
 		cap->stats_mask = RTE_TM_STATS_N_PKTS_RED_DROPPED |
@@ -2096,6 +2142,13 @@ otx2_nix_tm_shaper_profile_add(struct rte_eth_dev *eth_dev,
 		}
 	}
 
+	if (params->pkt_length_adjust < NIX_LENGTH_ADJUST_MIN ||
+	    params->pkt_length_adjust > NIX_LENGTH_ADJUST_MAX) {
+		error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PKT_ADJUST_LEN;
+		error->message = "length adjust invalid";
+		return -EINVAL;
+	}
+
 	profile = rte_zmalloc("otx2_nix_tm_shaper_profile",
 			      sizeof(struct otx2_nix_tm_shaper_profile), 0);
 	if (!profile)
@@ -2108,13 +2161,14 @@ otx2_nix_tm_shaper_profile_add(struct rte_eth_dev *eth_dev,
 
 	otx2_tm_dbg("Added TM shaper profile %u, "
 		    " pir %" PRIu64 " , pbs %" PRIu64 ", cir %" PRIu64
-		    ", cbs %" PRIu64 " , adj %u",
+		    ", cbs %" PRIu64 " , adj %u, pkt mode %d",
 		    profile_id,
 		    params->peak.rate * 8,
 		    params->peak.size,
 		    params->committed.rate * 8,
 		    params->committed.size,
-		    params->pkt_length_adjust);
+		    params->pkt_length_adjust,
+		    params->packet_mode);
 
 	/* Translate rate as bits per second */
 	profile->params.peak.rate = profile->params.peak.rate * 8;
@@ -2170,9 +2224,11 @@ otx2_nix_tm_node_add(struct rte_eth_dev *eth_dev, uint32_t node_id,
 		     struct rte_tm_error *error)
 {
 	struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+	struct otx2_nix_tm_shaper_profile *profile = NULL;
 	struct otx2_nix_tm_node *parent_node;
-	int rc, clear_on_fail = 0;
-	uint32_t exp_next_lvl;
+	int rc, pkt_mode, clear_on_fail = 0;
+	uint32_t exp_next_lvl, i;
+	uint32_t profile_id;
 	uint16_t hw_lvl;
 
 	/* we don't support dynamic updates */
@@ -2234,13 +2290,45 @@ otx2_nix_tm_node_add(struct rte_eth_dev *eth_dev, uint32_t node_id,
 		return -EINVAL;
 	}
 
-	/* Check if shaper profile exists for non leaf node */
-	if (!nix_tm_is_leaf(dev, lvl) &&
-	    params->shaper_profile_id != RTE_TM_SHAPER_PROFILE_ID_NONE &&
-	    !nix_tm_shaper_profile_search(dev, params->shaper_profile_id)) {
-		error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID;
-		error->message = "invalid shaper profile";
-		return -EINVAL;
+	if (!nix_tm_is_leaf(dev, lvl)) {
+		/* Check if shaper profile exists for non leaf node */
+		profile_id = params->shaper_profile_id;
+		profile = nix_tm_shaper_profile_search(dev, profile_id);
+		if (profile_id != RTE_TM_SHAPER_PROFILE_ID_NONE && !profile) {
+			error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID;
+			error->message = "invalid shaper profile";
+			return -EINVAL;
+		}
+
+		/* Minimum static priority count is 1 */
+		if (!params->nonleaf.n_sp_priorities ||
+		    params->nonleaf.n_sp_priorities > TXSCH_TLX_SP_PRIO_MAX) {
+			error->type =
+				RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SP_PRIORITIES;
+			error->message = "invalid sp priorities";
+			return -EINVAL;
+		}
+
+		pkt_mode = 0;
+		/* Validate weight mode */
+		for (i = 0; i < params->nonleaf.n_sp_priorities &&
+		     params->nonleaf.wfq_weight_mode; i++) {
+			pkt_mode = !params->nonleaf.wfq_weight_mode[i];
+			if (pkt_mode == !params->nonleaf.wfq_weight_mode[0])
+				continue;
+
+			error->type =
+				RTE_TM_ERROR_TYPE_NODE_PARAMS_WFQ_WEIGHT_MODE;
+			error->message = "unsupported weight mode";
+			return -EINVAL;
+		}
+
+		if (profile && params->nonleaf.n_sp_priorities &&
+		    pkt_mode != profile->params.packet_mode) {
+			error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE;
+			error->message = "shaper wfq packet mode mismatch";
+			return -EINVAL;
+		}
 	}
 
 	/* Check if there is second DWRR already in siblings or holes in prio */
@@ -2482,6 +2570,12 @@ otx2_nix_tm_node_shaper_update(struct rte_eth_dev *eth_dev,
 		}
 	}
 
+	if (profile && profile->params.packet_mode != tm_node->pkt_mode) {
+		error->type = RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID;
+		error->message = "shaper profile pkt mode mismatch";
+		return -EINVAL;
+	}
+
 	tm_node->params.shaper_profile_id = profile_id;
 
 	/* Nothing to do if not yet committed */
diff --git a/drivers/net/octeontx2/otx2_tm.h b/drivers/net/octeontx2/otx2_tm.h
index 9675182..cdca987 100644
--- a/drivers/net/octeontx2/otx2_tm.h
+++ b/drivers/net/octeontx2/otx2_tm.h
@@ -48,6 +48,7 @@ struct otx2_nix_tm_node {
 #define NIX_TM_NODE_USER	BIT_ULL(2)
 	/* Shaper algorithm for RED state @NIX_REDALG_E */
 	uint32_t red_algo:2;
+	uint32_t pkt_mode:1;
 
 	struct otx2_nix_tm_node *parent;
 	struct rte_tm_node_params params;
@@ -114,6 +115,10 @@ TAILQ_HEAD(otx2_nix_tm_shaper_profile_list, otx2_nix_tm_shaper_profile);
 #define MAX_SHAPER_RATE \
 	SHAPER_RATE(MAX_RATE_EXPONENT, MAX_RATE_MANTISSA, 0)
 
+/* Min is limited so that NIX_AF_SMQX_CFG[MINLEN]+ADJUST is not -ve */
+#define NIX_LENGTH_ADJUST_MIN ((int)-NIX_MIN_HW_FRS + 1)
+#define NIX_LENGTH_ADJUST_MAX 255
+
 /** TM Shaper - low level operations */
 
 /** NIX burst limits */
-- 
2.8.4


  parent reply	other threads:[~2020-04-22 17:21 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-30 16:00 [dpdk-dev] [PATCH 1/2] ethdev: add tm cap for private shaper packet mode Nithin Dabilpuram
2020-03-30 16:00 ` [dpdk-dev] [PATCH 2/2] app/testpmd: add tm non leaf node pktmode command Nithin Dabilpuram
2020-04-07  7:30 ` [dpdk-dev] [PATCH 1/2] ethdev: add tm cap for private shaper packet mode Nithin Dabilpuram
2020-04-07 16:31 ` Dumitrescu, Cristian
2020-04-07 17:21   ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-10 11:45     ` Dumitrescu, Cristian
2020-04-10 11:56       ` Nithin Dabilpuram
2020-04-11 11:44 ` [dpdk-dev] [PATCH v2 1/4] ethdev: add tm support for shaper config in pkt mode Nithin Dabilpuram
2020-04-11 11:44   ` [dpdk-dev] [PATCH v2 2/4] drivers/net: update tm capability for existing pmds Nithin Dabilpuram
2020-04-11 11:44   ` [dpdk-dev] [PATCH v2 3/4] app/testpmd: add tm cmd for non leaf and shaper pktmode Nithin Dabilpuram
2020-04-11 11:44   ` [dpdk-dev] [PATCH v2 4/4] net/octeontx2: support tm length adjust and pkt mode Nithin Dabilpuram
2020-04-16 13:48   ` [dpdk-dev] [PATCH v2 1/4] ethdev: add tm support for shaper config in " Ferruh Yigit
2020-04-21  5:11     ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-21  9:30   ` [dpdk-dev] " Dumitrescu, Cristian
2020-04-21  9:58     ` Nithin Dabilpuram
2020-04-21 10:23       ` Dumitrescu, Cristian
2020-04-21 11:55         ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-22  7:59 ` [dpdk-dev] [PATCH v3] " Nithin Dabilpuram
2020-04-22  7:59   ` [dpdk-dev] [PATCH v3 2/4] drivers/net: update tm capability for existing pmds Nithin Dabilpuram
2020-04-22  7:59   ` [dpdk-dev] [PATCH v3 3/4] app/testpmd: add tm cmd for non leaf and shaper pktmode Nithin Dabilpuram
2020-04-22  7:59   ` [dpdk-dev] [PATCH v3 4/4] net/octeontx2: support tm length adjust and pkt mode Nithin Dabilpuram
2020-04-22  8:09   ` [dpdk-dev] [PATCH v3] ethdev: add tm support for shaper config in " Nithin Dabilpuram
2020-04-22 12:18     ` Singh, Jasvinder
2020-04-22 17:21       ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-22 10:10   ` [dpdk-dev] " Dumitrescu, Cristian
2020-04-22 11:31     ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-22 11:49       ` Nithin Dabilpuram
2020-04-22 11:59         ` Dumitrescu, Cristian
2020-04-22 12:01       ` Dumitrescu, Cristian
2020-04-22  8:05 ` [dpdk-dev] [PATCH v3 1/4] " Nithin Dabilpuram
2020-04-22 17:21 ` [dpdk-dev] [PATCH v4 " Nithin Dabilpuram
2020-04-22 17:21   ` [dpdk-dev] [PATCH v4 2/4] drivers/net: update tm capability for existing pmds Nithin Dabilpuram
2020-04-22 17:21   ` [dpdk-dev] [PATCH v4 3/4] app/testpmd: add tm cmd for non leaf and shaper pktmode Nithin Dabilpuram
2020-04-22 17:21   ` Nithin Dabilpuram [this message]
2020-04-24 10:28   ` [dpdk-dev] [PATCH v4 1/4] ethdev: add tm support for shaper config in pkt mode Dumitrescu, Cristian
2020-04-25 20:09     ` Ferruh Yigit
2020-04-27  9:19       ` Dumitrescu, Cristian
2020-04-27 16:12         ` Ferruh Yigit
2020-04-27 16:28           ` Dumitrescu, Cristian
2020-04-28 15:30             ` Thomas Monjalon
2020-04-28 17:35               ` Dumitrescu, Cristian
2020-04-27 16:29           ` Jerin Jacob
2020-04-27 16:49             ` Ferruh Yigit
2020-04-27 16:59               ` Jerin Jacob
2020-04-28 11:51                 ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-28 13:56                   ` Ferruh Yigit
2020-04-28 14:06                 ` [dpdk-dev] " Ferruh Yigit
2020-04-28 14:45                   ` Bruce Richardson
2020-04-28 15:04                     ` Luca Boccassi
2020-04-28 15:54                       ` Thomas Monjalon
2020-04-29  8:45                         ` Dumitrescu, Cristian
2020-04-29  9:03                           ` Bruce Richardson
2020-05-01 10:27                             ` Ferruh Yigit
2020-05-01 13:16                               ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-08-25 16:59                                 ` Ferruh Yigit
2020-09-07 11:12                                   ` Nithin Dabilpuram
2020-09-14 13:01                                     ` Ferruh Yigit
2020-05-01 13:18                         ` [dpdk-dev] " Jerin Jacob
2020-05-05  8:01                           ` Ray Kinsella
2020-04-28 15:42                     ` Ray Kinsella

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200422172104.23099-4-nithind1988@gmail.com \
    --to=nithind1988@gmail.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=kirankumark@marvell.com \
    --cc=kkanas@marvell.com \
    --cc=ndabilpuram@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).