From: Muhammad Bilal <m.bilal@emumba.com>
To: declan.doherty@intel.com, tomasz.kantecki@intel.com,
pbhagavatula@marvell.com, skori@marvell.com
Cc: dev@dpdk.org, Muhammad Bilal <m.bilal@emumba.com>
Subject: [dpdk-dev] [PATCH 3/5] examples/l2fwd-keepalive: free resources in case of error
Date: Tue, 19 May 2020 13:54:42 +0500 [thread overview]
Message-ID: <20200519085444.4562-3-m.bilal@emumba.com> (raw)
In-Reply-To: <20200519085444.4562-1-m.bilal@emumba.com>
Freeing the resources and call rte_eal_cleanup in case of error exit.
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
---
examples/l2fwd-keepalive/main.c | 97 +++++++++++++++++++++++++--------
1 file changed, 74 insertions(+), 23 deletions(-)
diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
index b7585d55e..04038711f 100644
--- a/examples/l2fwd-keepalive/main.c
+++ b/examples/l2fwd-keepalive/main.c
@@ -526,6 +526,18 @@ relay_core_state(void *ptr_data, const int id_core,
id_core, core_state, last_alive);
}
+static void
+stop_and_close_eth_dev(uint16_t portid)
+{
+ RTE_ETH_FOREACH_DEV(portid) {
+ printf("Closing port %d...", portid);
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+ rte_eal_cleanup();
+}
+
int
main(int argc, char **argv)
{
@@ -533,7 +545,8 @@ main(int argc, char **argv)
int ret;
uint16_t nb_ports;
uint16_t nb_ports_available = 0;
- uint16_t portid, last_port;
+ uint16_t portid = 0;
+ uint16_t last_port;
unsigned lcore_id, rx_lcore_id;
unsigned nb_ports_in_mask = 0;
unsigned int total_nb_mbufs;
@@ -559,21 +572,28 @@ main(int argc, char **argv)
/* parse application arguments (after the EAL ones) */
ret = l2fwd_parse_args(argc, argv);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
+ }
nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* create the mbuf pool */
- total_nb_mbufs = NB_MBUF_PER_PORT * nb_ports;
-
- l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool",
- total_nb_mbufs, 32, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
- rte_socket_id());
- if (l2fwd_pktmbuf_pool == NULL)
+ l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+ if (l2fwd_pktmbuf_pool == NULL) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
+ }
+
+ nb_ports = rte_eth_dev_count_avail();
+ if (nb_ports == 0) {
+ stop_and_close_eth_dev(portid);
+ rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
+ }
/* reset l2fwd_dst_ports */
for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
@@ -615,8 +635,10 @@ main(int argc, char **argv)
lcore_queue_conf[rx_lcore_id].n_rx_port ==
l2fwd_rx_queue_per_lcore) {
rx_lcore_id++;
- if (rx_lcore_id >= RTE_MAX_LCORE)
+ if (rx_lcore_id >= RTE_MAX_LCORE) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Not enough cores\n");
+ }
}
if (qconf != &lcore_queue_conf[rx_lcore_id])
@@ -648,33 +670,41 @@ main(int argc, char **argv)
fflush(stdout);
ret = rte_eth_dev_info_get(portid, &dev_info);
- if (ret != 0)
+ if (ret != 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Error during getting device (port %u) info: %s\n",
portid, strerror(-ret));
+ }
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
local_port_conf.txmode.offloads |=
DEV_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Cannot configure device: err=%d, port=%u\n",
ret, portid);
+ }
ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
&nb_txd);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Cannot adjust number of descriptors: err=%d, port=%u\n",
ret, portid);
+ }
ret = rte_eth_macaddr_get(portid,
&l2fwd_ports_eth_addr[portid]);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Cannot mac address: err=%d, port=%u\n",
ret, portid);
+ }
/* init one RX queue */
fflush(stdout);
@@ -684,10 +714,12 @@ main(int argc, char **argv)
rte_eth_dev_socket_id(portid),
&rxq_conf,
l2fwd_pktmbuf_pool);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"rte_eth_rx_queue_setup:err=%d, port=%u\n",
ret, portid);
+ }
/* init one TX queue on each port */
fflush(stdout);
@@ -696,41 +728,51 @@ main(int argc, char **argv)
ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
rte_eth_dev_socket_id(portid),
&txq_conf);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"rte_eth_tx_queue_setup:err=%d, port=%u\n",
ret, portid);
+ }
/* Initialize TX buffers */
tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
rte_eth_dev_socket_id(portid));
- if (tx_buffer[portid] == NULL)
+ if (tx_buffer[portid] == NULL) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n",
portid);
+ }
rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);
ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
rte_eth_tx_buffer_count_callback,
&port_statistics[portid].dropped);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"Cannot set error callback for tx buffer on port %u\n",
portid);
+ }
/* Start device */
ret = rte_eth_dev_start(portid);
- if (ret < 0)
+ if (ret < 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"rte_eth_dev_start:err=%d, port=%u\n",
ret, portid);
+ }
ret = rte_eth_promiscuous_enable(portid);
- if (ret != 0)
+ if (ret != 0) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"rte_eth_promiscuous_enable:err=%s, port=%u\n",
rte_strerror(-ret), portid);
+ }
printf("Port %u, MAC address: "
"%02X:%02X:%02X:%02X:%02X:%02X\n\n",
@@ -747,6 +789,7 @@ main(int argc, char **argv)
}
if (!nb_ports_available) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"All available ports are disabled. Please set portmask.\n");
}
@@ -761,13 +804,17 @@ main(int argc, char **argv)
ka_shm = NULL;
if (check_period > 0) {
ka_shm = rte_keepalive_shm_create();
- if (ka_shm == NULL)
+ if (ka_shm == NULL) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE,
"rte_keepalive_shm_create() failed");
+ }
rte_global_keepalive_info =
rte_keepalive_create(&dead_core, ka_shm);
- if (rte_global_keepalive_info == NULL)
+ if (rte_global_keepalive_info == NULL) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "init_keep_alive() failed");
+ }
rte_keepalive_register_relay_callback(rte_global_keepalive_info,
relay_core_state, ka_shm);
rte_timer_init(&hb_timer);
@@ -778,8 +825,10 @@ main(int argc, char **argv)
(void(*)(struct rte_timer*, void*))
&rte_keepalive_dispatch_pings,
rte_global_keepalive_info
- ) != 0 )
+ ) != 0 ) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Keepalive setup failure.\n");
+ }
}
if (timer_period > 0) {
if (rte_timer_reset(&stats_timer,
@@ -787,8 +836,10 @@ main(int argc, char **argv)
PERIODICAL,
rte_lcore_id(),
&print_stats, NULL
- ) != 0 )
+ ) != 0 ) {
+ stop_and_close_eth_dev(portid);
rte_exit(EXIT_FAILURE, "Stats setup failure.\n");
+ }
}
/* launch per-lcore init on every slave lcore */
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
--
2.17.1
next prev parent reply other threads:[~2020-05-19 8:55 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-19 8:54 [dpdk-dev] [PATCH 1/5] examples/l2fwd-event: " Muhammad Bilal
2020-05-19 8:54 ` [dpdk-dev] [PATCH 2/5] examples/l2fwd-jobstats: " Muhammad Bilal
2020-05-19 8:54 ` Muhammad Bilal [this message]
2020-05-19 8:54 ` [dpdk-dev] [PATCH 4/5] examples/l2fwd-cat: " Muhammad Bilal
2020-05-19 8:54 ` [dpdk-dev] [PATCH 5/5] examples/l2fwd-crypto: " Muhammad Bilal
2020-05-19 9:34 ` [dpdk-dev] [EXT] [PATCH 1/5] examples/l2fwd-event: " Sunil Kumar Kori
2020-06-02 12:27 ` Muhammad Bilal
2020-06-10 10:01 ` Sunil Kumar Kori
2020-06-15 12:00 ` Muhammad Bilal
2020-06-16 5:53 ` Sunil Kumar Kori
2020-06-16 10:14 ` Muhammad Bilal
2020-06-16 10:38 ` Sunil Kumar Kori
2023-06-12 16:56 ` Stephen Hemminger
2023-06-12 17:17 ` Sunil Kumar Kori
2020-06-16 11:47 ` Jakub Grajciar -X (jgrajcia - PANTHEON TECH SRO at Cisco)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200519085444.4562-3-m.bilal@emumba.com \
--to=m.bilal@emumba.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=pbhagavatula@marvell.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).