DPDK patches and discussions
 help / color / mirror / Atom feed
From: Maxime Coquelin <maxime.coquelin@redhat.com>
To: dev@dpdk.org, matan@mellanox.com, chenbo.xia@intel.com,
	yong.liu@intel.com, yinan.wang@intel.com
Cc: thomas@monjalon.net, ferruh.yigit@intel.com,
	david.marchand@redhat.com,
	Maxime Coquelin <maxime.coquelin@redhat.com>
Subject: [dpdk-dev] [PATCH v4 3/3] net/vhost: fix interrupt mode
Date: Wed, 29 Jul 2020 15:36:26 +0200	[thread overview]
Message-ID: <20200729133626.237098-4-maxime.coquelin@redhat.com> (raw)
In-Reply-To: <20200729133626.237098-1-maxime.coquelin@redhat.com>

At .new_device() time, only the first vring pair is
now ready, other vrings are configured later.

Problem is that when application will setup and enable
interrupts, only the first queue pair Rx interrupt will
be enabled.

This patches fixes the issue by setting the number of
max interrupts to the number of Rx queues that will be
later initialized. Then, as soon as a Rx vring is ready
and interrupt enabled by the application, it removes the
corresponding uninitialized epoll event, and installs a
new one with the valid FD.

Fixes: 604052ae5395 ("net/vhost: support queue update")

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
 drivers/net/vhost/rte_eth_vhost.c | 91 +++++++++++++++++++++++++++----
 1 file changed, 81 insertions(+), 10 deletions(-)

diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
index 951929c663..e55278af69 100644
--- a/drivers/net/vhost/rte_eth_vhost.c
+++ b/drivers/net/vhost/rte_eth_vhost.c
@@ -5,6 +5,7 @@
 #include <unistd.h>
 #include <pthread.h>
 #include <stdbool.h>
+#include <sys/epoll.h>
 
 #include <rte_mbuf.h>
 #include <rte_ethdev_driver.h>
@@ -95,6 +96,8 @@ struct vhost_queue {
 	uint16_t port;
 	uint16_t virtqueue_id;
 	struct vhost_stats stats;
+	int intr_enable;
+	rte_spinlock_t intr_lock;
 };
 
 struct pmd_internal {
@@ -524,12 +527,58 @@ find_internal_resource(char *ifname)
 	return list;
 }
 
+static int
+eth_vhost_update_intr(struct rte_eth_dev *eth_dev, uint16_t rxq_idx)
+{
+	struct rte_intr_handle *handle = eth_dev->intr_handle;
+	struct rte_epoll_event rev;
+	int epfd, ret;
+
+	if (!handle)
+		return 0;
+
+	if (handle->efds[rxq_idx] == handle->elist[rxq_idx].fd)
+		return 0;
+
+	VHOST_LOG(INFO, "kickfd for rxq-%d was changed, updating handler.\n",
+			rxq_idx);
+
+	if (handle->elist[rxq_idx].fd != -1)
+		VHOST_LOG(ERR, "Unexpected previous kickfd value (Got %d, expected -1).\n",
+				handle->elist[rxq_idx].fd);
+
+	/*
+	 * First remove invalid epoll event, and then install
+	 * the new one. May be solved with a proper API in the
+	 * future.
+	 */
+	epfd = handle->elist[rxq_idx].epfd;
+	rev = handle->elist[rxq_idx];
+	ret = rte_epoll_ctl(epfd, EPOLL_CTL_DEL, rev.fd,
+			&handle->elist[rxq_idx]);
+	if (ret) {
+		VHOST_LOG(ERR, "Delete epoll event failed.\n");
+		return ret;
+	}
+
+	rev.fd = handle->efds[rxq_idx];
+	handle->elist[rxq_idx] = rev;
+	ret = rte_epoll_ctl(epfd, EPOLL_CTL_ADD, rev.fd,
+			&handle->elist[rxq_idx]);
+	if (ret) {
+		VHOST_LOG(ERR, "Add epoll event failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int
 eth_rxq_intr_enable(struct rte_eth_dev *dev, uint16_t qid)
 {
 	struct rte_vhost_vring vring;
 	struct vhost_queue *vq;
-	int ret = 0;
+	int old_intr_enable, ret = 0;
 
 	vq = dev->data->rx_queues[qid];
 	if (!vq) {
@@ -537,6 +586,18 @@ eth_rxq_intr_enable(struct rte_eth_dev *dev, uint16_t qid)
 		return -1;
 	}
 
+	rte_spinlock_lock(&vq->intr_lock);
+	old_intr_enable = vq->intr_enable;
+	vq->intr_enable = 1;
+	ret = eth_vhost_update_intr(dev, qid);
+	rte_spinlock_unlock(&vq->intr_lock);
+
+	if (ret < 0) {
+		VHOST_LOG(ERR, "Failed to update rxq%d's intr\n", qid);
+		vq->intr_enable = old_intr_enable;
+		return ret;
+	}
+
 	ret = rte_vhost_get_vhost_vring(vq->vid, (qid << 1) + 1, &vring);
 	if (ret < 0) {
 		VHOST_LOG(ERR, "Failed to get rxq%d's vring\n", qid);
@@ -571,6 +632,8 @@ eth_rxq_intr_disable(struct rte_eth_dev *dev, uint16_t qid)
 	rte_vhost_enable_guest_notification(vq->vid, (qid << 1) + 1, 0);
 	rte_wmb();
 
+	vq->intr_enable = 0;
+
 	return 0;
 }
 
@@ -593,7 +656,6 @@ eth_vhost_install_intr(struct rte_eth_dev *dev)
 {
 	struct rte_vhost_vring vring;
 	struct vhost_queue *vq;
-	int count = 0;
 	int nb_rxq = dev->data->nb_rx_queues;
 	int i;
 	int ret;
@@ -623,6 +685,8 @@ eth_vhost_install_intr(struct rte_eth_dev *dev)
 
 	VHOST_LOG(INFO, "Prepare intr vec\n");
 	for (i = 0; i < nb_rxq; i++) {
+		dev->intr_handle->intr_vec[i] = RTE_INTR_VEC_RXTX_OFFSET + i;
+		dev->intr_handle->efds[i] = -1;
 		vq = dev->data->rx_queues[i];
 		if (!vq) {
 			VHOST_LOG(INFO, "rxq-%d not setup yet, skip!\n", i);
@@ -641,14 +705,12 @@ eth_vhost_install_intr(struct rte_eth_dev *dev)
 				"rxq-%d's kickfd is invalid, skip!\n", i);
 			continue;
 		}
-		dev->intr_handle->intr_vec[i] = RTE_INTR_VEC_RXTX_OFFSET + i;
 		dev->intr_handle->efds[i] = vring.kickfd;
-		count++;
 		VHOST_LOG(INFO, "Installed intr vec for rxq-%d\n", i);
 	}
 
-	dev->intr_handle->nb_efd = count;
-	dev->intr_handle->max_intr = count + 1;
+	dev->intr_handle->nb_efd = nb_rxq;
+	dev->intr_handle->max_intr = nb_rxq + 1;
 	dev->intr_handle->type = RTE_INTR_HANDLE_VDEV;
 
 	return 0;
@@ -835,6 +897,7 @@ vring_conf_update(int vid, struct rte_eth_dev *eth_dev, uint16_t vring_id)
 {
 	struct rte_eth_conf *dev_conf = &eth_dev->data->dev_conf;
 	struct pmd_internal *internal = eth_dev->data->dev_private;
+	struct vhost_queue *vq;
 	struct rte_vhost_vring vring;
 	int rx_idx = vring_id % 2 ? (vring_id - 1) >> 1 : -1;
 	int ret = 0;
@@ -853,12 +916,18 @@ vring_conf_update(int vid, struct rte_eth_dev *eth_dev, uint16_t vring_id)
 					vring_id);
 			return ret;
 		}
+		eth_dev->intr_handle->efds[rx_idx] = vring.kickfd;
 
-		if (vring.kickfd != eth_dev->intr_handle->efds[rx_idx]) {
-			VHOST_LOG(INFO, "kickfd for rxq-%d was changed.\n",
-					  rx_idx);
-			eth_dev->intr_handle->efds[rx_idx] = vring.kickfd;
+		vq = eth_dev->data->rx_queues[rx_idx];
+		if (!vq) {
+			VHOST_LOG(ERR, "rxq%d is not setup yet\n", rx_idx);
+			return -1;
 		}
+
+		rte_spinlock_lock(&vq->intr_lock);
+		if (vq->intr_enable)
+			ret = eth_vhost_update_intr(eth_dev, rx_idx);
+		rte_spinlock_unlock(&vq->intr_lock);
 	}
 
 	return ret;
@@ -1152,6 +1221,7 @@ eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
 
 	vq->mb_pool = mb_pool;
 	vq->virtqueue_id = rx_queue_id * VIRTIO_QNUM + VIRTIO_TXQ;
+	rte_spinlock_init(&vq->intr_lock);
 	dev->data->rx_queues[rx_queue_id] = vq;
 
 	return 0;
@@ -1173,6 +1243,7 @@ eth_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
 	}
 
 	vq->virtqueue_id = tx_queue_id * VIRTIO_QNUM + VIRTIO_RXQ;
+	rte_spinlock_init(&vq->intr_lock);
 	dev->data->tx_queues[tx_queue_id] = vq;
 
 	return 0;
-- 
2.26.2


  parent reply	other threads:[~2020-07-29 13:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29 13:36 [dpdk-dev] [PATCH v4 0/3] Fix Vhost regressions Maxime Coquelin
2020-07-29 13:36 ` [dpdk-dev] [PATCH v4 1/3] vhost: fix guest notification setting Maxime Coquelin
2020-07-29 13:36 ` [dpdk-dev] [PATCH v4 2/3] net/vhost: fix queue update Maxime Coquelin
2020-07-29 13:36 ` Maxime Coquelin [this message]
2020-07-29 14:18   ` [dpdk-dev] [PATCH v4 3/3] net/vhost: fix interrupt mode Xia, Chenbo
2020-07-30  5:48     ` Xiao, QimaiX
2020-07-29 14:54 ` [dpdk-dev] [PATCH v4 0/3] Fix Vhost regressions Maxime Coquelin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200729133626.237098-4-maxime.coquelin@redhat.com \
    --to=maxime.coquelin@redhat.com \
    --cc=chenbo.xia@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=matan@mellanox.com \
    --cc=thomas@monjalon.net \
    --cc=yinan.wang@intel.com \
    --cc=yong.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).