From: Steve Yang <stevex.yang@intel.com>
To: dev@dpdk.org
Cc: qiming.yang@intel.com, qi.z.zhang@intel.com,
Steve Yang <stevex.yang@intel.com>
Subject: [dpdk-dev] [PATCH v1 2/2] net/ice/base: support L4 for QinQ switch filter
Date: Fri, 10 Sep 2021 08:54:58 +0000 [thread overview]
Message-ID: <20210910085458.61835-3-stevex.yang@intel.com> (raw)
In-Reply-To: <20210910085458.61835-1-stevex.yang@intel.com>
This patch adds more dummy packet types for QinQ packet,
it enables tcp/udp layer of ipv4/ipv6 for QinQ payload,
so we can use L4 dst/src port as input set for switch
filter.
For Example:
flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 \
/ ipv4 src is 10.1.1.1 / tcp src is 400 / end actions vf id 1 / end
Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
drivers/net/ice/base/ice_switch.c | 173 +++++++++++++++++++++++++++++-
1 file changed, 168 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 9179f66c20..5da8d650da 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -1660,7 +1660,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_VLAN_EX, 12 },
{ ICE_VLAN_IN, 16 },
- { ICE_ETYPE_OL, 20 },
+ { ICE_ETYPE_OL, 20 },
{ ICE_IPV4_OFOS, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1674,6 +1674,35 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
0x81, 0x00, 0x00, 0x00, /* ICE_VLAN_IN 16 */
0x08, 0x00, /* ICE_ETYPE_OL 20 */
+ 0x45, 0x00, 0x00, 0x14, /* ICE_IPV4_OFOS 22 */
+ 0x00, 0x01, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x00, 0x00, /* 2 bytes for 4 byte alignment */
+};
+
+static const
+struct ice_dummy_pkt_offsets dummy_qinq_ipv4_udp_packet_offsets[] = {
+ { ICE_MAC_OFOS, 0 },
+ { ICE_VLAN_EX, 12 },
+ { ICE_VLAN_IN, 16 },
+ { ICE_ETYPE_OL, 20 },
+ { ICE_IPV4_OFOS, 22 },
+ { ICE_UDP_ILOS, 42 },
+ { ICE_PROTOCOL_LAST, 0 },
+};
+
+static const u8 dummy_qinq_ipv4_udp_pkt[] = {
+ 0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x91, 0x00, 0x00, 0x00, /* ICE_VLAN_EX 12 */
+ 0x81, 0x00, 0x00, 0x00, /* ICE_VLAN_IN 16 */
+ 0x08, 0x00, /* ICE_ETYPE_OL 20 */
+
0x45, 0x00, 0x00, 0x1c, /* ICE_IPV4_OFOS 22 */
0x00, 0x01, 0x00, 0x00,
0x00, 0x11, 0x00, 0x00,
@@ -1686,11 +1715,46 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
0x00, 0x00, /* 2 bytes for 4 byte alignment */
};
+static const
+struct ice_dummy_pkt_offsets dummy_qinq_ipv4_tcp_packet_offsets[] = {
+ { ICE_MAC_OFOS, 0 },
+ { ICE_VLAN_EX, 12 },
+ { ICE_VLAN_IN, 16 },
+ { ICE_ETYPE_OL, 20 },
+ { ICE_IPV4_OFOS, 22 },
+ { ICE_TCP_IL, 42 },
+ { ICE_PROTOCOL_LAST, 0 },
+};
+
+static const u8 dummy_qinq_ipv4_tcp_pkt[] = {
+ 0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x91, 0x00, 0x00, 0x00, /* ICE_VLAN_EX 12 */
+ 0x81, 0x00, 0x00, 0x00, /* ICE_VLAN_IN 16 */
+ 0x08, 0x00, /* ICE_ETYPE_OL 20 */
+
+ 0x45, 0x00, 0x00, 0x28, /* ICE_IPV4_OFOS 22 */
+ 0x00, 0x01, 0x00, 0x00,
+ 0x00, 0x06, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x00, 0x00, 0x00, 0x00, /* ICE_TCP_IL 42 */
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x50, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x00, 0x00, /* 2 bytes for 4 byte alignment */
+};
+
static const struct ice_dummy_pkt_offsets dummy_qinq_ipv6_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_VLAN_EX, 12 },
{ ICE_VLAN_IN, 16 },
- { ICE_ETYPE_OL, 20 },
+ { ICE_ETYPE_OL, 20 },
{ ICE_IPV6_OFOS, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1705,7 +1769,41 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
0x86, 0xDD, /* ICE_ETYPE_OL 20 */
0x60, 0x00, 0x00, 0x00, /* ICE_IPV6_OFOS 22 */
- 0x00, 0x10, 0x11, 0x00, /* Next header UDP */
+ 0x00, 0x00, 0x3b, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x00, 0x00, /* 2 bytes for 4 byte alignment */
+};
+
+static const
+struct ice_dummy_pkt_offsets dummy_qinq_ipv6_udp_packet_offsets[] = {
+ { ICE_MAC_OFOS, 0 },
+ { ICE_VLAN_EX, 12 },
+ { ICE_VLAN_IN, 16 },
+ { ICE_ETYPE_OL, 20 },
+ { ICE_IPV6_OFOS, 22 },
+ { ICE_UDP_ILOS, 62 },
+ { ICE_PROTOCOL_LAST, 0 },
+};
+
+static const u8 dummy_qinq_ipv6_udp_pkt[] = {
+ 0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x91, 0x00, 0x00, 0x00, /* ICE_VLAN_EX 12 */
+ 0x81, 0x00, 0x00, 0x00, /* ICE_VLAN_IN 16 */
+ 0x86, 0xDD, /* ICE_ETYPE_OL 20 */
+
+ 0x60, 0x00, 0x00, 0x00, /* ICE_IPV6_OFOS 22 */
+ 0x00, 0x08, 0x11, 0x00, /* Next header UDP */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
@@ -1716,9 +1814,46 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, /* ICE_UDP_ILOS 62 */
- 0x00, 0x10, 0x00, 0x00,
+ 0x00, 0x08, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, /* needed for ESP packets */
+ 0x00, 0x00, /* 2 bytes for 4 byte alignment */
+};
+
+static const
+struct ice_dummy_pkt_offsets dummy_qinq_ipv6_tcp_packet_offsets[] = {
+ { ICE_MAC_OFOS, 0 },
+ { ICE_VLAN_EX, 12 },
+ { ICE_VLAN_IN, 16 },
+ { ICE_ETYPE_OL, 20 },
+ { ICE_IPV6_OFOS, 22 },
+ { ICE_TCP_IL, 62 },
+ { ICE_PROTOCOL_LAST, 0 },
+};
+
+static const u8 dummy_qinq_ipv6_tcp_pkt[] = {
+ 0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x91, 0x00, 0x00, 0x00, /* ICE_VLAN_EX 12 */
+ 0x81, 0x00, 0x00, 0x00, /* ICE_VLAN_IN 16 */
+ 0x86, 0xDD, /* ICE_ETYPE_OL 20 */
+
+ 0x60, 0x00, 0x00, 0x00, /* ICE_IPV6_OFOS 22 */
+ 0x00, 0x14, 0x06, 0x00, /* Next header TCP */
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+
+ 0x00, 0x00, 0x00, 0x00, /* ICE_TCP_IL 62 */
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x50, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, /* 2 bytes for 4 byte alignment */
@@ -7918,12 +8053,40 @@ ice_find_dummy_packet(struct ice_adv_lkup_elem *lkups, u16 lkups_cnt,
if ((tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
tun_type == ICE_NON_TUN_QINQ) && ipv6) {
+ if (tcp) {
+ *pkt = dummy_qinq_ipv6_tcp_pkt;
+ *pkt_len = sizeof(dummy_qinq_ipv6_tcp_pkt);
+ *offsets = dummy_qinq_ipv6_tcp_packet_offsets;
+ return;
+ }
+
+ if (udp) {
+ *pkt = dummy_qinq_ipv6_udp_pkt;
+ *pkt_len = sizeof(dummy_qinq_ipv6_udp_pkt);
+ *offsets = dummy_qinq_ipv6_udp_packet_offsets;
+ return;
+ }
+
*pkt = dummy_qinq_ipv6_pkt;
*pkt_len = sizeof(dummy_qinq_ipv6_pkt);
*offsets = dummy_qinq_ipv6_packet_offsets;
return;
} else if (tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
tun_type == ICE_NON_TUN_QINQ) {
+ if (tcp) {
+ *pkt = dummy_qinq_ipv4_tcp_pkt;
+ *pkt_len = sizeof(dummy_qinq_ipv4_tcp_pkt);
+ *offsets = dummy_qinq_ipv4_tcp_packet_offsets;
+ return;
+ }
+
+ if (udp) {
+ *pkt = dummy_qinq_ipv4_udp_pkt;
+ *pkt_len = sizeof(dummy_qinq_ipv4_udp_pkt);
+ *offsets = dummy_qinq_ipv4_udp_packet_offsets;
+ return;
+ }
+
*pkt = dummy_qinq_ipv4_pkt;
*pkt_len = sizeof(dummy_qinq_ipv4_pkt);
*offsets = dummy_qinq_ipv4_packet_offsets;
--
2.27.0
next prev parent reply other threads:[~2021-09-10 8:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-10 8:54 [dpdk-dev] [PATCH v1 0/2] " Steve Yang
2021-09-10 8:54 ` [dpdk-dev] [PATCH v1 1/2] net/ice: add L4 support " Steve Yang
2021-09-10 8:54 ` Steve Yang [this message]
2021-09-16 7:14 ` [dpdk-dev] [PATCH v1 0/2] support L4 " Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210910085458.61835-3-stevex.yang@intel.com \
--to=stevex.yang@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
--cc=qiming.yang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).