DPDK patches and discussions
 help / color / mirror / Atom feed
* [PATCH] net/mlx5: fix wrong MPRQ WQE size assertion
@ 2022-01-13 14:36 Alexander Kozyrev
  2022-01-18  8:34 ` Raslan Darawsheh
  0 siblings, 1 reply; 2+ messages in thread
From: Alexander Kozyrev @ 2022-01-13 14:36 UTC (permalink / raw)
  To: dev; +Cc: rasland, viacheslavo, matan, michaelba

Preparation of the stride size and the number of strides for
Multi-Packet RQ was updated recently to accommodate the hardware
limitation about minimum WQE size. The wrong assertion was
introduced to ensure this limitation is met. Assert that the
configured WQE size is not less than the minimum supported size.

Fixes: 219f08a ("net/mlx5: fix missing adjustment MPRQ stride devargs")

Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
 drivers/net/mlx5/mlx5_rxq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index ed21fbba1e..105e094fdf 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1619,7 +1619,7 @@ mlx5_mprq_prepare(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 		log_stride_wqe_size = log_def_stride_num + log_def_stride_size;
-	MLX5_ASSERT(log_stride_wqe_size < config->mprq.log_min_stride_wqe_size);
+	MLX5_ASSERT(log_stride_wqe_size >= config->mprq.log_min_stride_wqe_size);
 	if (desc <= RTE_BIT32(*actual_log_stride_num))
 		goto unsupport;
 	if (min_mbuf_size > RTE_BIT32(log_stride_wqe_size)) {

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-01-18  8:34 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-13 14:36 [PATCH] net/mlx5: fix wrong MPRQ WQE size assertion Alexander Kozyrev
2022-01-18  8:34 ` Raslan Darawsheh

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git