DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Kumar, Ravi1" <Ravi1.Kumar@amd.com>
To: "Namburu, Chandu-babu" <chandu@amd.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Somalapuram, Amaranath" <Amaranath.Somalapuram@amd.com>
Subject: Re: [dpdk-dev] [PATCH v1] net/axgbe: add debug logs
Date: Sun, 16 Feb 2020 06:49:05 +0000	[thread overview]
Message-ID: <MW2PR12MB257047076BAEE98D386B4A37AE170@MW2PR12MB2570.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20200211081939.17793-1-cnamburu@amd.com>

[AMD Official Use Only - Internal Distribution Only]

Acked-by: Ravi Kumar <ravi1.kumar@amd.com>

>
>
>-----Original Message-----
>From: Namburu, Chandu-babu <chandu@amd.com> 
>Sent: Tuesday, February 11, 2020 1:50 PM
>To: dev@dpdk.org
>Cc: Kumar, Ravi1 <Ravi1.Kumar@amd.com>; Somalapuram, Amaranath <Amaranath.Somalapuram@amd.com>
>Subject: [PATCH v1] net/axgbe: add debug logs
>
>From: Chandu Babu N <chandu@amd.com>
>
>Add debug logs in various modules in axgbe
>
>Signed-off-by: Chandu Babu N <chandu@amd.com>
>---
> drivers/net/axgbe/axgbe_dev.c      | 17 ++++++++--
> drivers/net/axgbe/axgbe_ethdev.c   |  2 ++
> drivers/net/axgbe/axgbe_i2c.c      | 10 ++++++
> drivers/net/axgbe/axgbe_mdio.c     | 51 +++++++++++++++++++++++++++++-
> drivers/net/axgbe/axgbe_phy_impl.c | 43 ++++++++++++++++++++++++-
> 5 files changed, 119 insertions(+), 4 deletions(-)
>
>diff --git a/drivers/net/axgbe/axgbe_dev.c b/drivers/net/axgbe/axgbe_dev.c index 83089f20d..2e796c0b3 100644
>--- a/drivers/net/axgbe/axgbe_dev.c
>+++ b/drivers/net/axgbe/axgbe_dev.c
>@@ -260,6 +260,9 @@ static int axgbe_enable_tx_flow_control(struct axgbe_port *pdata)
> 			ehfc = 1;
> 
> 		AXGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_RQOMR, EHFC, ehfc);
>+
>+		PMD_DRV_LOG(DEBUG, "flow control %s for RXq%u\n",
>+			    ehfc ? "enabled" : "disabled", i);
> 	}
> 
> 	/* Set MAC flow control */
>@@ -915,6 +918,9 @@ static void axgbe_config_rx_fifo_size(struct axgbe_port *pdata)
> 	/*Calculate and config Flow control threshold*/
> 	axgbe_calculate_flow_control_threshold(pdata);
> 	axgbe_config_flow_control_threshold(pdata);
>+
>+	PMD_DRV_LOG(DEBUG, "%d Rx hardware queues, %d byte fifo per queue\n",
>+		    pdata->rx_q_count, q_fifo_size);
> }
> 
> static void axgbe_config_tx_fifo_size(struct axgbe_port *pdata) @@ -938,6 +944,9 @@ static void axgbe_config_tx_fifo_size(struct axgbe_port *pdata)
> 
> 	for (i = 0; i < pdata->tx_q_count; i++)
> 		AXGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_TQOMR, TQS, p_fifo);
>+
>+	PMD_DRV_LOG(DEBUG, "%d Tx hardware queues, %d byte fifo per queue\n",
>+		    pdata->tx_q_count, q_fifo_size);
> }
> 
> static void axgbe_config_queue_mapping(struct axgbe_port *pdata) @@ -952,12 +961,16 @@ static void axgbe_config_queue_mapping(struct axgbe_port *pdata)
> 	qptc_extra = pdata->tx_q_count % pdata->hw_feat.tc_cnt;
> 
> 	for (i = 0, queue = 0; i < pdata->hw_feat.tc_cnt; i++) {
>-		for (j = 0; j < qptc; j++)
>+		for (j = 0; j < qptc; j++) {
>+			PMD_DRV_LOG(DEBUG, "TXq%u mapped to TC%u\n", queue, i);
> 			AXGMAC_MTL_IOWRITE_BITS(pdata, queue, MTL_Q_TQOMR,
> 						Q2TCMAP, i);
>-		if (i < qptc_extra)
>+		}
>+		if (i < qptc_extra) {
>+			PMD_DRV_LOG(DEBUG, "TXq%u mapped to TC%u\n", queue, i);
> 			AXGMAC_MTL_IOWRITE_BITS(pdata, queue, MTL_Q_TQOMR,
> 						Q2TCMAP, i);
>+		}
> 	}
> 
> 	if (pdata->rss_enable) {
>diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
>index d0b6f091f..7445c544d 100644
>--- a/drivers/net/axgbe/axgbe_ethdev.c
>+++ b/drivers/net/axgbe/axgbe_ethdev.c
>@@ -201,12 +201,14 @@ axgbe_dev_interrupt_handler(void *param)
> 	pdata->phy_if.an_isr(pdata);
> 	/*DMA related interrupts*/
> 	dma_isr = AXGMAC_IOREAD(pdata, DMA_ISR);
>+	PMD_DRV_LOG(DEBUG, "DMA_ISR=%#010x\n", dma_isr);
> 	if (dma_isr) {
> 		if (dma_isr & 1) {
> 			dma_ch_isr =
> 				AXGMAC_DMA_IOREAD((struct axgbe_rx_queue *)
> 						  pdata->rx_queues[0],
> 						  DMA_CH_SR);
>+			PMD_DRV_LOG(DEBUG, "DMA_CH0_ISR=%#010x\n", dma_ch_isr);
> 			AXGMAC_DMA_IOWRITE((struct axgbe_rx_queue *)
> 					   pdata->rx_queues[0],
> 					   DMA_CH_SR, dma_ch_isr);
>diff --git a/drivers/net/axgbe/axgbe_i2c.c b/drivers/net/axgbe/axgbe_i2c.c index 204ec3679..ab3738a12 100644
>--- a/drivers/net/axgbe/axgbe_i2c.c
>+++ b/drivers/net/axgbe/axgbe_i2c.c
>@@ -162,9 +162,15 @@ static int axgbe_i2c_isr(struct axgbe_port *pdata)
> 
> 	isr = XI2C_IOREAD(pdata, IC_RAW_INTR_STAT);
> 
>+	PMD_DRV_LOG(DEBUG, "I2C interrupt received: status=%#010x\n", isr);
>+
> 	axgbe_i2c_clear_isr_interrupts(pdata, isr);
> 
> 	if (isr & AXGBE_INTR_TX_ABRT) {
>+		PMD_DRV_LOG(DEBUG,
>+			    "I2C TX_ABRT received (%#010x) for target %#04x\n",
>+			    state->tx_abort_source, state->op->target);
>+
> 		axgbe_i2c_disable_interrupts(pdata);
> 
> 		state->ret = -EIO;
>@@ -285,6 +291,8 @@ static void axgbe_i2c_stop(struct axgbe_port *pdata)
> 	if (!pdata->i2c.started)
> 		return;
> 
>+	PMD_DRV_LOG(DEBUG, "stopping I2C\n");
>+
> 	pdata->i2c.started = 0;
> 	axgbe_i2c_disable_interrupts(pdata);
> 	axgbe_i2c_disable(pdata);
>@@ -296,6 +304,8 @@ static int axgbe_i2c_start(struct axgbe_port *pdata)
> 	if (pdata->i2c.started)
> 		return 0;
> 
>+	PMD_DRV_LOG(DEBUG, "starting I2C\n");
>+
> 	pdata->i2c.started = 1;
> 
> 	return 0;
>diff --git a/drivers/net/axgbe/axgbe_mdio.c b/drivers/net/axgbe/axgbe_mdio.c index 4b280b72d..0f226c3f2 100644
>--- a/drivers/net/axgbe/axgbe_mdio.c
>+++ b/drivers/net/axgbe/axgbe_mdio.c
>@@ -300,6 +300,8 @@ static void axgbe_an73_restart(struct axgbe_port *pdata)  {
> 	axgbe_an73_enable_interrupts(pdata);
> 	axgbe_an73_set(pdata, true, true);
>+
>+	PMD_DRV_LOG(DEBUG, "CL73 AN enabled/restarted\n");
> }
> 
> static void axgbe_an73_disable(struct axgbe_port *pdata) @@ -307,6 +309,8 @@ static void axgbe_an73_disable(struct axgbe_port *pdata)
> 	axgbe_an73_set(pdata, false, false);
> 	axgbe_an73_disable_interrupts(pdata);
> 	pdata->an_start = 0;
>+
>+	PMD_DRV_LOG(DEBUG, "CL73 AN disabled\n");
> }
> 
> static void axgbe_an_restart(struct axgbe_port *pdata) @@ -384,6 +388,8 @@ static enum axgbe_an axgbe_an73_tx_training(struct axgbe_port *pdata,
> 		XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
> 			    reg);
> 
>+		PMD_DRV_LOG(DEBUG, "KR training initiated\n");
>+
> 		if (pdata->phy_if.phy_impl.kr_training_post)
> 			pdata->phy_if.phy_impl.kr_training_post(pdata);
> 	}
>@@ -466,6 +472,9 @@ static enum axgbe_an axgbe_an73_page_received(struct axgbe_port *pdata)
> 			pdata->kx_state = AXGBE_RX_BPA;
> 
> 			pdata->an_start = rte_get_timer_cycles();
>+
>+			PMD_DRV_LOG(NOTICE,
>+				    "CL73 AN timed out, resetting state\n");
> 		}
> 	}
> 
>@@ -515,6 +524,26 @@ static enum axgbe_an axgbe_an73_incompat_link(struct axgbe_port *pdata)
> 	return AXGBE_AN_INCOMPAT_LINK;
> }
> 
>+static const char *axgbe_state_as_string(enum axgbe_an state) {
>+	switch (state) {
>+	case AXGBE_AN_READY:
>+		return "Ready";
>+	case AXGBE_AN_PAGE_RECEIVED:
>+		return "Page-Received";
>+	case AXGBE_AN_INCOMPAT_LINK:
>+		return "Incompatible-Link";
>+	case AXGBE_AN_COMPLETE:
>+		return "Complete";
>+	case AXGBE_AN_NO_LINK:
>+		return "No-Link";
>+	case AXGBE_AN_ERROR:
>+		return "Error";
>+	default:
>+		return "Undefined";
>+	}
>+}
>+
> static void axgbe_an73_state_machine(struct axgbe_port *pdata)  {
> 	enum axgbe_an cur_state = pdata->an_state; @@ -536,6 +565,9 @@ static void axgbe_an73_state_machine(struct axgbe_port *pdata)
> 		pdata->an_state = AXGBE_AN_ERROR;
> 	}
> 
>+	PMD_DRV_LOG(DEBUG, "CL73 AN : %s\n",
>+		    axgbe_state_as_string(pdata->an_state));
>+
> again:
> 	cur_state = pdata->an_state;
> 
>@@ -581,6 +613,9 @@ static void axgbe_an73_state_machine(struct axgbe_port *pdata)
> 		pdata->an_start = 0;
> 		if (pdata->phy_if.phy_impl.an_post)
> 			pdata->phy_if.phy_impl.an_post(pdata);
>+
>+		PMD_DRV_LOG(DEBUG, "CL73 AN result: %s\n",
>+			    axgbe_state_as_string(pdata->an_result));
> 	}
> 
> 	if (cur_state != pdata->an_state)
>@@ -685,6 +720,8 @@ static void axgbe_an37_isr(struct axgbe_port *pdata)
> 
> static void axgbe_an_isr(struct axgbe_port *pdata)  {
>+	PMD_DRV_LOG(DEBUG, "AN interrupt received\n");
>+
> 	switch (pdata->an_mode) {
> 	case AXGBE_AN_MODE_CL73:
> 	case AXGBE_AN_MODE_CL73_REDRV:
>@@ -792,6 +829,8 @@ static void axgbe_an73_init(struct axgbe_port *pdata)
> 	reg &= ~AXGBE_XNP_NP_EXCHANGE;
> 
> 	XMDIO_WRITE(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
>+
>+	PMD_DRV_LOG(DEBUG, "CL73 AN initialized\n");
> }
> 
> static void axgbe_an_init(struct axgbe_port *pdata) @@ -843,6 +882,8 @@ static int axgbe_phy_config_fixed(struct axgbe_port *pdata)  {
> 	enum axgbe_mode mode;
> 
>+	PMD_DRV_LOG(DEBUG, "fixed PHY configuration\n");
>+
> 	/* Disable auto-negotiation */
> 	axgbe_an_disable(pdata);
> 
>@@ -886,6 +927,9 @@ static int __axgbe_phy_config_aneg(struct axgbe_port *pdata)
> 		ret = axgbe_phy_config_fixed(pdata);
> 		if (ret || !pdata->kr_redrv)
> 			return ret;
>+		PMD_DRV_LOG(DEBUG, "AN redriver support\n");
>+	} else {
>+		PMD_DRV_LOG(DEBUG, "AN PHY configuration\n");
> 	}
> 
> 	/* Disable auto-negotiation interrupt */ @@ -959,8 +1003,10 @@ static void axgbe_check_link_timeout(struct axgbe_port *pdata)
> 	link_timeout = pdata->link_check + (AXGBE_LINK_TIMEOUT *
> 					    2 *  rte_get_timer_hz());
> 	ticks = rte_get_timer_cycles();
>-	if (time_after(ticks, link_timeout))
>+	if (time_after(ticks, link_timeout)) {
>+		PMD_DRV_LOG(NOTICE, "AN link timeout\n");
> 		axgbe_phy_config_aneg(pdata);
>+	}
> }
> 
> static enum axgbe_mode axgbe_phy_status_aneg(struct axgbe_port *pdata) @@ -1088,6 +1134,7 @@ static void axgbe_phy_status(struct axgbe_port *pdata)
> 
> static void axgbe_phy_stop(struct axgbe_port *pdata)  {
>+	PMD_DRV_LOG(DEBUG, "stopping PHY\n");
> 	if (!pdata->phy_started)
> 		return;
> 	/* Indicate the PHY is down */
>@@ -1103,6 +1150,8 @@ static int axgbe_phy_start(struct axgbe_port *pdata)  {
> 	int ret;
> 
>+	PMD_DRV_LOG(DEBUG, "starting PHY\n");
>+
> 	ret = pdata->phy_if.phy_impl.start(pdata);
> 	if (ret)
> 		return ret;
>diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
>index a324a2bc9..02236ec19 100644
>--- a/drivers/net/axgbe/axgbe_phy_impl.c
>+++ b/drivers/net/axgbe/axgbe_phy_impl.c
>@@ -790,6 +790,32 @@ static void axgbe_phy_sfp_reset(struct axgbe_phy_data *phy_data)
> 	phy_data->sfp_speed = AXGBE_SFP_SPEED_UNKNOWN;  }
> 
>+static const char *axgbe_base_as_string(enum axgbe_sfp_base sfp_base) {
>+	switch (sfp_base) {
>+	case AXGBE_SFP_BASE_1000_T:
>+		return "1G_T";
>+	case AXGBE_SFP_BASE_1000_SX:
>+		return "1G_SX";
>+	case AXGBE_SFP_BASE_1000_LX:
>+		return "1G_LX";
>+	case AXGBE_SFP_BASE_1000_CX:
>+		return "1G_CX";
>+	case AXGBE_SFP_BASE_10000_SR:
>+		return "10G_SR";
>+	case AXGBE_SFP_BASE_10000_LR:
>+		return "10G_LR";
>+	case AXGBE_SFP_BASE_10000_LRM:
>+		return "10G_LRM";
>+	case AXGBE_SFP_BASE_10000_ER:
>+		return "10G_ER";
>+	case AXGBE_SFP_BASE_10000_CR:
>+		return "10G_CR";
>+	default:
>+		return "Unknown";
>+	}
>+}
>+
> static void axgbe_phy_sfp_detect(struct axgbe_port *pdata)  {
> 	struct axgbe_phy_data *phy_data = pdata->phy_data; @@ -820,6 +846,9 @@ static void axgbe_phy_sfp_detect(struct axgbe_port *pdata)
> 	axgbe_phy_sfp_parse_eeprom(pdata);
> 	axgbe_phy_sfp_external_phy(pdata);
> 
>+	PMD_DRV_LOG(DEBUG, "SFP Base: %s\n",
>+		    axgbe_base_as_string(phy_data->sfp_base));
>+
> put:
> 	axgbe_phy_sfp_phy_settings(pdata);
> 	axgbe_phy_put_comm_ownership(pdata);
>@@ -1169,7 +1198,10 @@ static void axgbe_phy_set_redrv_mode(struct axgbe_port *pdata)
> 
> static void axgbe_phy_start_ratechange(struct axgbe_port *pdata)  {
>-	if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
>+	/* Log if a previous command did not complete */
>+	if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
>+		PMD_DRV_LOG(NOTICE, "firmware mailbox not ready for command\n");
>+	else
> 		return;
> }
> 
>@@ -1185,6 +1217,7 @@ static void axgbe_phy_complete_ratechange(struct axgbe_port *pdata)
> 
> 		rte_delay_us(1500);
> 	}
>+	PMD_DRV_LOG(NOTICE, "firmware mailbox command did not complete\n");
> }
> 
> static void axgbe_phy_rrc(struct axgbe_port *pdata) @@ -1204,6 +1237,8 @@ static void axgbe_phy_rrc(struct axgbe_port *pdata)
> 	XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
> 
> 	axgbe_phy_complete_ratechange(pdata);
>+
>+	PMD_DRV_LOG(DEBUG, "receiver reset complete\n");
> }
> 
> static void axgbe_phy_power_off(struct axgbe_port *pdata) @@ -1218,6 +1253,8 @@ static void axgbe_phy_power_off(struct axgbe_port *pdata)
> 	XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
> 	axgbe_phy_complete_ratechange(pdata);
> 	phy_data->cur_mode = AXGBE_MODE_UNKNOWN;
>+
>+	PMD_DRV_LOG(DEBUG, "phy powered off\n");
> }
> 
> static void axgbe_phy_sfi_mode(struct axgbe_port *pdata) @@ -1249,6 +1286,8 @@ static void axgbe_phy_sfi_mode(struct axgbe_port *pdata)
> 	XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
> 	axgbe_phy_complete_ratechange(pdata);
> 	phy_data->cur_mode = AXGBE_MODE_SFI;
>+
>+	PMD_DRV_LOG(DEBUG, "10GbE SFI mode set\n");
> }
> 
> static void axgbe_phy_kr_mode(struct axgbe_port *pdata) @@ -1271,6 +1310,8 @@ static void axgbe_phy_kr_mode(struct axgbe_port *pdata)
> 	XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
> 	axgbe_phy_complete_ratechange(pdata);
> 	phy_data->cur_mode = AXGBE_MODE_KR;
>+
>+	PMD_DRV_LOG(DEBUG, "10GbE KR mode set\n");
> }
> 
> static void axgbe_phy_kx_2500_mode(struct axgbe_port *pdata)
>--
>2.17.1
>
>

  reply	other threads:[~2020-02-16  6:49 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-11  8:19 cnamburu
2020-02-16  6:49 ` Kumar, Ravi1 [this message]
2020-02-27  9:18   ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MW2PR12MB257047076BAEE98D386B4A37AE170@MW2PR12MB2570.namprd12.prod.outlook.com \
    --to=ravi1.kumar@amd.com \
    --cc=Amaranath.Somalapuram@amd.com \
    --cc=chandu@amd.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).