test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH]tests: change packet configuration
@ 2020-09-02 15:15 Peng Yuan
  2020-09-10  0:55 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Peng Yuan @ 2020-09-02 15:15 UTC (permalink / raw)
  To: dts; +Cc: Peng Yuan

change packet configuration to fix traffic error.
add eal_param to adapt the tester and dut on the same server senario.
get driver type from config file.

Signed-off-by: Peng Yuan <yuan.peng@intel.com>

diff --git a/tests/TestSuite_softnic.py b/tests/TestSuite_softnic.py
index c6ba6b9..7752546 100644
--- a/tests/TestSuite_softnic.py
+++ b/tests/TestSuite_softnic.py
@@ -75,7 +75,8 @@ class TestSoftnic(TestCase):
         self.dut.session.copy_file_to(self.firmware, self.root_path)
         self.dut.session.copy_file_to(self.tm_firmware, self.root_path)
         self.dut.session.copy_file_to(self.nat_firmware, self.root_path)
-        self.cmd = "./%s/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/tmp/%s,cpu_id=1,conn_port=8086' -- -i --forward-mode=softnic --portmask=0x2"
+        self.eal_param = " -w %s" % self.dut.ports_info[0]['pci']
+        self.cmd = "./%s/app/testpmd -c 0x7 -s 0x4 -n 4 %s --vdev 'net_softnic0,firmware=/tmp/%s,cpu_id=1,conn_port=8086' -- -i --forward-mode=softnic --portmask=0x2"
         # get dts output path
         if self.logger.log_path.startswith(os.sep):
             self.output_path = self.logger.log_path
@@ -90,7 +91,7 @@ class TestSoftnic(TestCase):
         self.host_intf = self.dut.ports_info[self.used_dut_port]['intf']
         out = self.dut.send_expect('ethtool %s' % self.host_intf, '#')
         self.speed = re.findall('Supported link modes:   (\d*)', out)[0]
-        self.dut.bind_interfaces_linux('igb_uio', [ports[0]])
+        self.dut.bind_interfaces_linux(self.drivername, [ports[0]])
 
     def set_up(self):
         """
@@ -106,7 +107,7 @@ class TestSoftnic(TestCase):
         # 10G nic pps(M)
         expect_pps = [14, 8, 4, 2, 1, 0.9, 0.8]
 
-        self.dut.send_expect(self.cmd % (self.target, 'firmware.cli'), "testpmd>", timeout=300)
+        self.dut.send_expect(self.cmd % (self.target, self.eal_param, 'firmware.cli'), "testpmd>", timeout=300)
         self.dut.send_expect("set fwd macswap", "testpmd>")
         self.dut.send_expect("start", "testpmd>")
         rx_port = self.tester.get_local_port(0)
@@ -116,7 +117,7 @@ class TestSoftnic(TestCase):
             payload_size = frame - self.headers_size
             tgen_input = []
             pcap = os.sep.join([self.output_path, "test.pcap"])
-            pkt = "Ether(dst='%s')/IP()/UDP()/Raw('x'*%d)" % (self.dmac, payload_size)
+            pkt = "Ether(dst='%s')/IP()/UDP()/Raw(load='x'*%d)" % (self.dmac, payload_size)
             self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, pkt))
             tgen_input.append((tx_port, rx_port, pcap))
             self.tester.scapy_execute()
@@ -132,11 +133,11 @@ class TestSoftnic(TestCase):
 
     def test_perf_shaping_for_pipe(self):
         self.change_config_file('tm_firmware.cli')
-        self.dut.send_expect(self.cmd % (self.target, 'tm_firmware.cli'), "testpmd> ", timeout=800)
+        self.dut.send_expect(self.cmd % (self.target, self.eal_param, 'tm_firmware.cli'), "testpmd> ", timeout=800)
         self.dut.send_expect("set fwd macswap", "testpmd>")
         self.dut.send_expect("start", "testpmd>")
         rx_port = self.tester.get_local_port(0)
-        pkts = ["Ether(dst='%s')/IP(dst='100.0.0.0')/UDP()/Raw('x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.15.255')/UDP()/Raw('x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.4.0')/UDP()/Raw('x'*(64 - %s))"]
+        pkts = ["Ether(dst='%s')/IP(dst='100.0.0.0')/UDP()/Raw(load='x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.15.255')/UDP()/Raw(load='x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.4.0')/UDP()/Raw(load='x'*(64 - %s))"]
         except_bps_range = [1700000, 2000000]
 
         for i in range(3):
@@ -169,7 +170,7 @@ class TestSoftnic(TestCase):
         for t in pkt_type:
             for i in range(2):
                 self.dut.send_expect("sed -i -e '12c table action profile AP0 ipv4 offset 270 fwd nat %s proto %s' %s" % (pkt_location[i], t, self.root_path + 'nat_firmware.cli'), "#")
-                self.dut.send_expect(self.cmd % (self.target, 'nat_firmware.cli'), "testpmd>", timeout=60)
+                self.dut.send_expect(self.cmd % (self.target, self.eal_param, 'nat_firmware.cli'), "testpmd>", timeout=60)
                 self.dut.send_expect("start", "testpmd>")
                 # src ip tcp
                 for j in range(2):
@@ -182,9 +183,9 @@ class TestSoftnic(TestCase):
         self.tester.scapy_foreground()
         pkt = "Ether(dst='%s')/IP(dst='%s')/" % (self.dmac, ip)
         if pkt_type == 'tcp':
-            pkt = pkt + "TCP()/Raw('x'*20)"
+            pkt = pkt + "TCP()/Raw(load='x'*20)"
         else:
-            pkt = pkt + "UDP()/Raw('x'*20)"
+            pkt = pkt + "UDP()/Raw(load='x'*20)"
 
         self.tester.scapy_append('sendp([%s], iface="%s")' % (pkt, self.txItf))
         self.start_tcpdump(self.txItf)
-- 
2.7.4


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2020-09-10  0:55 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-02 15:15 [dts] [PATCH]tests: change packet configuration Peng Yuan
2020-09-10  0:55 ` Tu, Lijuan

test suite reviews and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \
		dts@dpdk.org
	public-inbox-index dts

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dts


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git