test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v1] test_plans: add test plan for vdev primary and secondary test
@ 2019-06-27 18:20 Yinan
  2019-07-10  6:17 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-06-27 18:20 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 .../vdev_primary_secondary_test_plan.rst      | 130 ++++++++++++++++++
 1 file changed, 130 insertions(+)
 create mode 100644 test_plans/vdev_primary_secondary_test_plan.rst

diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst
new file mode 100644
index 0000000..338c779
--- /dev/null
+++ b/test_plans/vdev_primary_secondary_test_plan.rst
@@ -0,0 +1,130 @@
+.. Copyright (c) <2016>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=============================================
+Primary/secondary process with vdev test plan
+=============================================
+
+This test plan will test vdev primary/secondary by symmetric multi-process example, which demonstrates how a set of processes can run in parallel,
+with each process performing the same set of packet processing operations.
+
+Symmetric MP Application Description
+------------------------------------
+
+This test is a multi-process test which demonstrates how multiple processes can
+work together to perform packet I/O and packet processing in parallel, much as
+other example application work by using multiple threads. In this example, each
+process reads packets from all network ports being used - though from a different
+RX queue in each case. Those packets are then forwarded by each process which
+sends them out by writing them directly to a suitable TX queue.
+
+Prerequisites
+-------------
+
+Assuming that DPDK build has been set up and the multi-process sample
+applications have been built. It is also assumed that a traffic generator has
+been configured and plugged in to the NIC ports 0 and 1.
+
+Test Methodology
+----------------
+
+As with the simple_mp example, the first instance of the symmetric_mp process
+must be run as the primary instance, though with a number of other application
+specific parameters also provided after the EAL arguments. These additional
+parameters are:
+
+* -p <portmask>, where portmask is a hexadecimal bitmask of what ports on the
+  system are to be used. For example: -p 3 to use ports 0 and 1 only.
+* --num-procs <N>, where N is the total number of symmetric_mp instances that
+  will be run side-by-side to perform packet processing. This parameter is used to
+  configure the appropriate number of receive queues on each network port.
+* --proc-id <n>, where n is a numeric value in the range 0 <= n < N (number of
+  processes, specified above). This identifies which symmetric_mp instance is being
+  run, so that each process can read a unique receive queue on each network port.
+
+The secondary symmetric_mp instances must also have these parameters specified,
+and the first two must be the same as those passed to the primary instance, or errors
+result.
+
+For example, to run a set of four symmetric_mp instances, running on lcores 1-4, all
+performing level-2 forwarding of packets between ports 0 and 1, the following
+commands can be used (assuming run as root)::
+
+   ./build/symmetric_mp -c 2 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0
+   ./build/symmetric_mp -c 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1
+   ./build/symmetric_mp -c 8 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2
+   ./build/symmetric_mp -c 10 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3
+
+To run only 1 or 2 instances, the above parameters to the 1 or 2 instances being
+run should remain the same, except for the ``num-procs`` value, which should be
+adjusted appropriately.
+
+Test Case 1: Virtio primary and secondary process test
+======================================================
+
+SW preparation: Change one line of the symmetric_mp sample and rebuild::
+
+    vi ./examples/multi_process/symmetric_mp/main.c
+    -.offloads = DEV_RX_OFFLOAD_CHECKSUM,
+
+1. Bind one port to igb_uio, launch testpmd by below command::
+
+    ./testpmd -l 1-6 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1'  -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+    testpmd>set fwd txonly
+    testpmd>start
+
+2. Launch VM with two virtio ports, must set queues=2 as app receive packets from special queue which index same with proc-id::
+
+    qemu-system-x86_64 -name us-vhost-vm \
+     -cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+     -chardev socket,id=char,path=./vhost-net,server -netdev type=vhost-user,id=mynet1,chardev=char,vhostforce,queues=2 \
+     -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet1,mrg_rxbuf=on,csum=on,mq=on,vectors=15  \
+     -chardev socket,id=char1,path=./vhost-net1,server -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=2 \
+     -device virtio-net-pci,mac=52:54:00:00:00:03,netdev=mynet2,mrg_rxbuf=on,csum=on,mq=on,vectors=15  \
+     -vnc :10 -daemonize
+
+3.  Bind virtio port to igb_uio::
+
+    ./usertools/dpdk-devbind.py --bind=igb_uio xx:xx.x
+    ./usertools/dpdk-devbind.py --bind=igb_uio xx:xx.x
+
+4. Launch two process by example::
+
+    examples/multi_process/symmetric_mp -l 1 -n 4 --proc-type=auto -- -p 3 --num-procs=2 --proc-id=0
+    examples/multi_process/symmetric_mp -l 2 -n 4 --proc-type=secondary -- -p 3 --num-procs=2 --proc-id=1
+
+5. Quit all process, check the packets number in rx/tx statistic like below for both primary process and secondary process::
+
+    Port 0: RX - 27511680, TX - 256, Drop - 27499168
+    Port 1: RX - 27499424, TX - 256, Drop - 27511424
\ No newline at end of file
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-07-10  6:17 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-27 18:20 [dts] [PATCH v1] test_plans: add test plan for vdev primary and secondary test Yinan
2019-07-10  6:17 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).