test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH V1]test_plans/cvl_advanced_iavf_rss_test_plan:delete steps after destroying rss rules
@ 2021-01-26 17:35 qifu
  0 siblings, 0 replies; only message in thread
From: qifu @ 2021-01-26 17:35 UTC (permalink / raw)
  To: dts; +Cc: qifu

synced with developer, the behavior after destroy rss rules are not unified.
so delete the steps after destroying rss rules. 

Signed-off-by: qifu <qi.fu@intel.com>
---
 .../cvl_advanced_iavf_rss_test_plan.rst       | 80 +------------------
 1 file changed, 2 insertions(+), 78 deletions(-)

diff --git a/test_plans/cvl_advanced_iavf_rss_test_plan.rst b/test_plans/cvl_advanced_iavf_rss_test_plan.rst
index c4661550..5cc48c5b 100644
--- a/test_plans/cvl_advanced_iavf_rss_test_plan.rst
+++ b/test_plans/cvl_advanced_iavf_rss_test_plan.rst
@@ -335,8 +335,7 @@ all the test cases run the same test steps as below:
    check the packet is distributed to queues by rss.
    note: if there is not this type packet in the case, omit this step.
 6. destroy the rule and list rule.
-7. send same packet with step 3.
-   check the received packet have different hash value with basic packet.
+
 
 Test case: MAC_IPV4
 ===================
@@ -1502,8 +1501,7 @@ all the test cases run the same test steps as below:
    check all the packets are distributed to queues by rss.
    note: if there is not this type packet in the case, omit this step.
 6. destroy the rule and list rule.
-7. send same packets with step 2.
-   check the received packets have different hash value, or have no hash value.
+
 
 Test case: symmetric MAC_IPV4
 =============================
@@ -1760,41 +1758,6 @@ Subcase 1: two rules with same pattern but different hash input set, not hit def
 
    check the hash value is different from the first packet.
 
-5. destroy the rule 1::
-
-     testpmd> flow destroy 0 rule 1
-     testpmd> flow list 0
-
-   check the rule 1 not exists in the list.
-   send a MAC_IPV4_UDP packet, you can find it hit default ipv4 profile::
-
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",dst="192.168.0.5")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-
-   change the fields [Source IP] or [Dest IP], send a packet::
-
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.7",dst="192.168.0.5")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",dst="192.168.0.9")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.7",dst="192.168.0.9")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-
-   check the hash values of the last two packets are different from the first packet.
-   destroy the rule 0::
-
-     testpmd> flow destroy 0 rule 0
-     testpmd> flow list 0
-
-   check the rule 0 not exists in the list.
-   send a MAC_IPV4_UDP packet, you can find it hit default ipv4 profile::
-
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",dst="192.168.0.5")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-
-   change the fields [Source IP] or [Dest IP], send a packet::
-
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.7",dst="192.168.0.5")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",dst="192.168.0.9")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.7",dst="192.168.0.9")/UDP(dport=45)/Raw("x"*480)], iface="enp134s0f0")
-
-   check the hash values of the last two packets are different from the first packet.
-
 Subcase 2: two rules with same pattern but different hash input set, hit default profile
 ----------------------------------------------------------------------------------------
 
@@ -1842,18 +1805,6 @@ Subcase 2: two rules with same pattern but different hash input set, hit default
 
    check the hash value is different from the first packet.
 
-5. destroy the rule 1::
-
-     testpmd> flow destroy 0 rule 1
-     testpmd> flow list 0
-
-   check the rule 1 not exists in the list.
-   send the MAC_IPV4_PAY packet::
-
-     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",dst="192.168.0.5")/Raw("x"*480)], iface="enp134s0f0")
-
-   check the hash value is not exist.
-
 Subcase 3: two rules, scope smaller created first, and the larger one created later
 -----------------------------------------------------------------------------------
 
@@ -1901,20 +1852,6 @@ Subcase 3: two rules, scope smaller created first, and the larger one created la
 
    check the hash value is the same as the first packet.
 
-5. destroy the rule 1::
-
-     testpmd> flow destroy 0 rule 1
-     testpmd> flow list 0
-
-   check the rule 1 not exists in the list.
-   repeat step 2, get the same result.
-   destroy the rule 0::
-
-     testpmd> flow destroy 0 rule 0
-     testpmd> flow list 0
-
-   send a MAC_IPV4_UDP_PAY packet, check the hash values not exists.
-
 Subcase 4: two rules, scope larger created first, and the smaller one created later
 -----------------------------------------------------------------------------------
 
@@ -1962,16 +1899,3 @@ Subcase 4: two rules, scope larger created first, and the smaller one created la
 
    check the hash value is the same as the first packet.
 
-5. destroy the rule 1::
-
-     testpmd> flow destroy 0 rule 1
-     testpmd> flow list 0
-
-   check the rule 1 not exists in the list.
-   repeat step 2, hit ipv4 profile, get the same result.
-   destroy the rule 0::
-
-     testpmd> flow destroy 0 rule 0
-     testpmd> flow list 0
-
-   send a MAC_IPV4_UDP_PAY packet, check the hash values not exists.
-- 
2.17.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2021-01-26  8:50 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-26 17:35 [dts] [PATCH V1]test_plans/cvl_advanced_iavf_rss_test_plan:delete steps after destroying rss rules qifu

test suite reviews and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \
		dts@dpdk.org
	public-inbox-index dts

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dts


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git