test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH V1 3/3] test_plans/virtio_event_idx_interrupt_test_plan.rst
@ 2021-04-01 16:34 Yinan Wang
  0 siblings, 0 replies; only message in thread
From: Yinan Wang @ 2021-04-01 16:34 UTC (permalink / raw)
  To: dts; +Cc: Yinan Wang

Add cases for cbdma packed ring test.

Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
 .../virtio_event_idx_interrupt_test_plan.rst  | 77 ++++++++++++++++++-
 1 file changed, 75 insertions(+), 2 deletions(-)

diff --git a/test_plans/virtio_event_idx_interrupt_test_plan.rst b/test_plans/virtio_event_idx_interrupt_test_plan.rst
index eb26a13f..f30bfd6d 100644
--- a/test_plans/virtio_event_idx_interrupt_test_plan.rst
+++ b/test_plans/virtio_event_idx_interrupt_test_plan.rst
@@ -261,7 +261,7 @@ Test Case 6: Wake up packed ring virtio-net cores with event idx interrupt mode
 Test Case 7: Split ring virtio-pci driver reload test with CBDMA enabled
 ========================================================================
 
-1. Bind one nic port and one cbdma port to igb_uio, then launch the vhost sample by below commands::
+1. Bind one nic port and one cbdma channel to igb_uio, then launch the vhost sample by below commands::
 
     rm -rf vhost-net*
     ./testpmd -c 0xF0000000 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -299,7 +299,7 @@ Test Case 7: Split ring virtio-pci driver reload test with CBDMA enabled
 Test Case 8: Wake up split ring virtio-net cores with event idx interrupt mode and cbdma enabled 16 queues test
 ================================================================================================================
 
-1. Bind one nic port to igb_uio, then launch the vhost sample by below commands::
+1. Bind one nic port and 16 cbdma channels to igb_uio, then launch the vhost sample by below commands::
 
     rm -rf vhost-net*
     ./testpmd -l 1-17 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7],dmathr=64' -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
@@ -331,3 +331,76 @@ Test Case 8: Wake up split ring virtio-net cores with event idx interrupt mode a
     testpmd>start
     testpmd>stop
 
+Test Case 9: Packed ring virtio-pci driver reload test with CBDMA enabled
+========================================================================
+
+1. Bind one nic port and one cbdma channel to igb_uio, then launch the vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./testpmd -c 0xF0000000 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>start
+
+2. Launch VM::
+
+    taskset -c 32-33 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu2004_2.img  \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
+     -chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+     -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on \
+     -vnc :12 -daemonize
+
+3. On VM1, set virtio device IP, send 10M packets from packet generator to nic then check virtio device can receive packets::
+
+    ifconfig [ens3] 1.1.1.2      # [ens3] is the name of virtio-net
+    tcpdump -i [ens3]
+
+4. Reload virtio-net driver by below cmds::
+
+    ifconfig [ens3] down
+    ./dpdk-devbind.py -u [00:03.0]   # [00:03.0] is the pci addr of virtio-net
+    ./dpdk-devbind.py -b virtio-pci [00:03.0]
+
+5. Check virtio device can receive packets again::
+
+    ifconfig [ens3] 1.1.1.2
+    tcpdump -i [ens3]
+
+6. Rerun step4 and step5 100 times to check event idx workable after driver reload.
+
+Test Case 10: Wake up packed ring virtio-net cores with event idx interrupt mode and cbdma enabled 16 queues test
+================================================================================================================
+
+1. Bind one nic port and 16 cbdma channels to igb_uio, then launch the vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./testpmd -l 1-17 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7],dmathr=64' -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+    testpmd>start
+
+2. Launch VM::
+
+    taskset -c 32-33 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu2004_2.img  \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
+     -chardev socket,id=char0,path=./vhost-net,server -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
+     -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on \
+     -vnc :12 -daemonize
+
+3. On VM1, give virtio device ip addr and enable vitio-net with 16 quques::
+
+    ifconfig [ens3] 1.1.1.2           # [ens3] is the name of virtio-net
+    ethtool -L [ens3] combined 16
+
+4. Send 10M different ip addr packets from packet generator to nic, check virtio-net interrupt times by below cmd in VM::
+
+    cat /proc/interrupts
+
+5. After two hours stress test, stop and restart testpmd, check each queue has new packets coming::
+
+    testpmd>stop
+    testpmd>start
+    testpmd>stop
+
-- 
2.25.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2021-04-01  7:52 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-01 16:34 [dts] [PATCH V1 3/3] test_plans/virtio_event_idx_interrupt_test_plan.rst Yinan Wang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).