test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts][PATCH V1 2/7] test_plans/basic_4k_pages_dsa_test_plan: add basic_4k_pages_dsa testplan
@ 2022-05-07  9:58 Wei Ling
  0 siblings, 0 replies; only message in thread
From: Wei Ling @ 2022-05-07  9:58 UTC (permalink / raw)
  To: dts; +Cc: Wei Ling

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 68569 bytes --]

Add basic_4k_pages_dsa_test_plan.rst into test_plans.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 test_plans/basic_4k_pages_dsa_test_plan.rst | 1146 +++++++++++++++++++
 1 file changed, 1146 insertions(+)
 create mode 100644 test_plans/basic_4k_pages_dsa_test_plan.rst

diff --git a/test_plans/basic_4k_pages_dsa_test_plan.rst b/test_plans/basic_4k_pages_dsa_test_plan.rst
new file mode 100644
index 00000000..235fa5f4
--- /dev/null
+++ b/test_plans/basic_4k_pages_dsa_test_plan.rst
@@ -0,0 +1,1146 @@
+.. Copyright (c) <2022>, Intel Corporation\r
+   All rights reserved.\r
+\r
+   Redistribution and use in source and binary forms, with or without\r
+   modification, are permitted provided that the following conditions\r
+   are met:\r
+\r
+   - Redistributions of source code must retain the above copyright\r
+     notice, this list of conditions and the following disclaimer.\r
+\r
+   - Redistributions in binary form must reproduce the above copyright\r
+     notice, this list of conditions and the following disclaimer in\r
+     the documentation and/or other materials provided with the\r
+     distribution.\r
+\r
+   - Neither the name of Intel Corporation nor the names of its\r
+     contributors may be used to endorse or promote products derived\r
+     from this software without specific prior written permission.\r
+\r
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS\r
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT\r
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS\r
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE\r
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,\r
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\r
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR\r
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)\r
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,\r
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)\r
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED\r
+   OF THE POSSIBILITY OF SUCH DAMAGE.\r
+\r
+===============================================================\r
+vhost async operation with DSA driver using 4K-pages test plan\r
+===============================================================\r
+\r
+Description\r
+===========\r
+\r
+Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way.\r
+In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA\r
+channels and one DMA channel can be shared by multiple vrings at the same time. Vhost enqueue operation with CBDMA channels is supported\r
+in both split and packed ring.\r
+\r
+This document provides the test plan for testing some basic functions when Vhost-user using asynchronous data path with\r
+DSA driver (kernel IDXD driver and DPDK vfio-pci driver) and using 4K-pages memory environment.\r
+1. test Vhost asynchronous data path with DSA driver in the PVP topology environment with testpmd.\r
+2. check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and packed ring \r
+vhost-user/virtio-net mergeable path.\r
+3.Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring\r
+and packed ring vhost-user/virtio-net mergeable and non-mergeable path.\r
+4. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring.\r
+5. Vhost-user using 1G hugepges and virtio-user using 4k-pages.\r
+\r
+DPDK 19.02 add support for using virtio-user without hugepages. The --no-huge mode was augmented to use memfd-backed\r
+memory (on systems that support memfd), to allow using virtio-user-based NICs without hugepages.\r
+\r
+Note:\r
+1. When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may\r
+exceed IOMMU's max capability, better to use 1G guest hugepage.\r
+2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd, and the suite has not yet been automated.\r
+\r
+Prerequisites\r
+=============\r
+\r
+General set up\r
+--------------\r
+1. Turn off transparent hugepage in grub by adding GRUB_CMDLINE_LINUX="transparent_hugepage=never".\r
+\r
+2. Compile DPDK::\r
+\r
+	# CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>\r
+	# ninja -C <dpdk build dir> -j 110\r
+	For example,\r
+	CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc\r
+	ninja -C x86_64-native-linuxapp-gcc -j 110\r
+\r
+3. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -s\r
+\r
+	Network devices using kernel driver\r
+	===================================\r
+	0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci\r
+\r
+	4DMA devices using kernel driver\r
+	4===============================\r
+	40000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+	40000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+	40000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+	40000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+	40000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+	40000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+	40000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+	40000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci\r
+\r
+4. Prepare tmpfs with 4K-pages::\r
+\r
+	mkdir /mnt/tmpfs_4k\r
+	mkdir /mnt/tmpfs_4k_2\r
+	mount tmpfs /mnt/tmpfs_4k -t tmpfs -o size=4G\r
+	mount tmpfs /mnt/tmpfs_4k_2 -t tmpfs -o size=4G\r
+\r
+Test case\r
+=========\r
+\r
+Common steps\r
+------------\r
+1. Bind 1 NIC port to vfio-pci::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>\r
+	For example:\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:4f.1\r
+\r
+2.Bind DSA devices to DPDK vfio-pci driver::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port DSA device id>\r
+	For example, bind 2 DMA devices to vfio-pci driver:\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0\r
+\r
+.. note::\r
+\r
+	One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and\r
+	eight WQ for DSA deivce 0000:e7:01.0 and 0000:ec:01.0. The value of “max_queues” is 1~8:\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:e7:01.0,max_queues=1 -- -i\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:ec:01.0,max_queues=8 -- -i\r
+\r
+3. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>\r
+	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq>\r
+\r
+.. note::\r
+\r
+	Better to reset WQ when need operate DSA devices that bound to idxd drvier:\r
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices * 2>\r
+	You can check it by 'ls /dev/dsa'\r
+	numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0\r
+	numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8\r
+\r
+	For example, bind 2 DMA devices to idxd driver and configure WQ:\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0\r
+	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0\r
+	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2\r
+	Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3"\r
+\r
+Test Case 1: Basic test vhost/virtio-user split ring with 4K-pages and dsa dpdk driver\r
+----------------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring when vhost uses the asynchronous \r
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.\r
+\r
+1. Bind one dsa device(6a:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2.\r
+\r
+2. Launch vhost::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=1 \\r
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:6a:01.0-q0]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with 4K-pages::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::\r
+\r
+	testpmd>show port stats all\r
+\r
+Test Case 2: Basic test vhost/virtio-user packed ring with 4K-pages and dsa dpdk driver\r
+----------------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring when vhost uses the asynchronous \r
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.\r
+\r
+1. Bind one dsa device(6a:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2.\r
+\r
+2. Launch vhost::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=4 \\r
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:6a:01.0-q0]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with 4K-pages::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::\r
+\r
+	testpmd>show port stats all\r
+\r
+Test Case 3: PVP split ring multi-queues with 4K-pages and dsa dpdk driver\r
+-----------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring multi-queues when vhost uses the asynchronous \r
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.\r
+\r
+1. Bind 8 dsa device and one nic port to vfio-pci like common step 1-2::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 \r
+\r
+2. Launch vhost by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:4f:00.1 -a 0000:6a:01.0 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \\r
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \\r
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with inorder mergeable path::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \\r
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::\r
+\r
+	testpmd>show port stats all\r
+\r
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::\r
+\r
+	testpmd>stop\r
+\r
+6. restart vhost port and send imix pkts again, check get same throuhput as above::\r
+\r
+	testpmd>start\r
+	testpmd>show port stats all\r
+\r
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels with 1G hugepage::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \\r
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+8. Rerun step 3-5.\r
+\r
+Test Case 4: PVP packed ring multi-queues with 4K-pages and dsa dpdk driver\r
+------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring multi-queues when vhost uses the asynchronous \r
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.\r
+\r
+1. Bind 8 dsa device and one nic port to vfio-pci like common step 1-2::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 \r
+\r
+2. Launch vhost by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:4f:00.1 -a 0000:6a:01.0 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \\r
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \\r
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with inorder mergeable path::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \\r
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::\r
+\r
+	testpmd>show port stats all\r
+\r
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::\r
+\r
+	testpmd>stop\r
+\r
+6. restart vhost port and send imix pkts again, check get same throuhput as above::\r
+\r
+	testpmd>start\r
+	testpmd>show port stats all\r
+\r
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels with 1G hugepage::::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \\r
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+8. Rerun step 3-5.\r
+\r
+Test Case 5: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic\r
+--------------------------------------------------------------------------------------------------------\r
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path \r
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver \r
+in 4k-pages environment.\r
+\r
+1. Bind 1 dsa device to vfio-pci like common step 2::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0\r
+\r
+2. Launch vhost by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:6a:01.0,max_queues=2 \\r
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],dma_ring_size=2048' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0],dma_ring_size=2048' \\r
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:6a:01.0-q0,lcore4@0000:6a:01.0-q1]\r
+	testpmd>start\r
+\r
+3. Launch VM1 and VM2::\r
+\r
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10\r
+\r
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12\r
+\r
+3. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+4. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+5. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+6. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::\r
+\r
+	testpmd>show port xstats all\r
+\r
+Test Case 6: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic\r
+---------------------------------------------------------------------------------------------------------\r
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path \r
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver \r
+in 4k-pages environment.\r
+\r
+1. Bind 1 dsa device to vfio-pci like common step 2::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0\r
+ \r
+2. Launch vhost by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:6a:01.0 \\r
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],dma_ring_size=2048' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0],dma_ring_size=2048' \\r
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:6a:01.0-q0,lcore4@0000:6a:01.0-q1]\r
+	testpmd>start\r
+\r
+3. Launch VM1 and VM2::\r
+\r
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10\r
+\r
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12\r
+\r
+3. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+4. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+5. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+6. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::\r
+\r
+	testpmd>show port xstats all\r
+\r
+Test Case 7: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa dpdk driver\r
+---------------------------------------------------------------------------------------------------------\r
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in \r
+vm2vm vhost-user/virtio-net multi-queues mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver.\r
+And one virtio-net is split ring, the other is packed ring. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.\r
+\r
+1. Bind 2 dsa channel to vfio-pci like common step 2::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+\r
+2. Launch vhost::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \\r
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \\r
+	--lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3,lcore3@0000:6a:01.0-q0,lcore3@0000:74:01.0-q2,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:6f:01.0-q1,lcore4@0000:79:01.0-q3,lcore4@0000:6a:01.0-q1,lcore4@0000:6f:01.0-q2,lcore4@0000:74:01.0-q3,lcore4@0000:79:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q6,lcore4@0000:f1:01.0-q7,lcore5@0000:f6:01.0-q0]\r
+	testpmd>start\r
+\r
+3. Launch VM qemu::\r
+\r
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10\r
+\r
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12\r
+\r
+4. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ethtool -L ens5 combined 8\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+5. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ethtool -L ens5 combined 8\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+6. Scp 1MB file form VM1 to VM2::\r
+\r
+	<VM1># scp <file> root@1.1.1.8:/\r
+\r
+7. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+Test Case 8: Basic test vhost/virtio-user split ring with 4K-pages and dsa kernel driver\r
+----------------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring when vhost uses the asynchronous \r
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.\r
+\r
+1. Bind one nic port to vfio-pci and one dsa device to idxd like common step 1 and 3::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1\r
+\r
+	#ls /dev/dsa,check wq configure, reset if exist\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch vhost::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 \\r
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@wq0.0]\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with 4K-pages::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i\r
+	testpmd>start\r
+\r
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::\r
+\r
+	testpmd>show port stats all\r
+\r
+Test Case 9: Basic test vhost/virtio-user packed ring with 4K-pages and dsa dpdk driver\r
+----------------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring when vhost uses the asynchronous \r
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.\r
+\r
+1. Bind one nic port to vfio-pci and one dsa device to idxd like common step 1 and 3::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1\r
+\r
+	#ls /dev/dsa,check wq configure, reset if exist\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch vhost::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 \\r
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@wq0.1]\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with 4K-pages::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i\r
+	testpmd>start\r
+\r
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::\r
+\r
+	testpmd>show port stats all\r
+\r
+Test Case 10: PVP split ring multi-queues with 4K-pages and dsa kernel driver\r
+--------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring multi-queues when vhost uses the asynchronous \r
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.\r
+\r
+1. Bind one nic port to vfio-pci and 8 dsa device to idxd like common step 1 and 3::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1\r
+\r
+	.ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch vhost by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:4f:00.1 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \\r
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \\r
+	--lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with inorder mergeable path::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \\r
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::\r
+\r
+	testpmd>show port stats all\r
+\r
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::\r
+\r
+	testpmd>stop\r
+\r
+6. restart vhost port and send imix pkts again, check get same throuhput as above::\r
+\r
+	testpmd>start\r
+	testpmd>show port stats all\r
+\r
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \\r
+	--lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq0.1,lcore13@wq0.2,lcore14@wq0.1,lcore14@wq0.2,lcore15@wq0.1,lcore15@wq0.2]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+8. Rerun step 4-6.\r
+\r
+Test Case 11: PVP packed ring multi-queues with 4K-pages and dsa kernel driver\r
+---------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring multi-queues when vhost uses the asynchronous\r
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.\r
+\r
+1. Bind one nic port to vfio-pci and 8 dsa device to idxd like common step 1 and 3::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1\r
+\r
+	.ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch vhost by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:4f:00.1 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3]' \\r
+	--iova=va -- -i --nb-cores=8 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \\r
+	--lcore-dma=[lcore11@wq0.0,lcore12@wq2.1,lcore13@wq4.2,lcore14@wq6.3]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with inorder mergeable path::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \\r
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::\r
+\r
+	testpmd>show port stats all\r
+\r
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::\r
+\r
+	testpmd>stop\r
+\r
+6. restart vhost port and send imix pkts again, check get same throuhput as above::\r
+\r
+	testpmd>start\r
+	testpmd>show port stats all\r
+\r
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18  -a 0000:4f:00.1 \\r
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \\r
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \\r
+	--lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+8. Rerun step 4-6.\r
+\r
+Test Case 12: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic\r
+---------------------------------------------------------------------------------------------------------\r
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path\r
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver\r
+in 4k-pages environment.\r
+\r
+1. Bind 1 dsa device to idxd like common step 2::\r
+\r
+	ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch the Vhost sample by below commands::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \\r
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \\r
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --no-numa --socket-num=0 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3]\r
+	testpmd>start\r
+\r
+3. Launch VM1 and VM2 on socket 1::\r
+\r
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10\r
+\r
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12\r
+\r
+4. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+5. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+6. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::\r
+\r
+	testpmd>show port xstats all\r
+\r
+Test Case 13: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic\r
+-----------------------------------------------------------------------------------------------------------\r
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path\r
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver\r
+in 4k-pages environment.\r
+\r
+1. Bind 2 dsa device to idxd like common step 2::\r
+\r
+	ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch the Vhost sample by below commands::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost \\r
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \\r
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore4@wq2.0]\r
+	testpmd>start\r
+\r
+3. Launch VM1 and VM2 with qemu::\r
+\r
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10\r
+\r
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12\r
+\r
+4. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+5. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+6. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::\r
+\r
+	testpmd>show port xstats all\r
+\r
+Test Case 14: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa kernel driver\r
+-----------------------------------------------------------------------------------------------------------\r
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in\r
+vm2vm vhost-user/virtio-net split and packed ring mergeable path when vhost uses the asynchronous enqueue operations with\r
+dsa kernel driver. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.\r
+\r
+1. Bind 8 dsa device to idxd like common step 3::\r
+\r
+	ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch vhost::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \\r
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \\r
+	--lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3,lcore3@wq0.0,lcore3@wq4.2,lcore3@wq8.4,lcore3@wq10.5,lcore3@wq12.6,lcore3@wq14.7,lcore4@wq2.1,lcore4@wq6.3,lcore4@wq0.1,lcore4@wq2.2,lcore4@wq4.3,lcore4@wq6.4,lcore4@wq8.5,lcore4@wq10.6,lcore4@wq12.7,lcore5@wq14.0]\r
+	testpmd>start\r
+\r
+3. Launch VM qemu::\r
+\r
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10\r
+\r
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12\r
+\r
+4. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ethtool -L ens5 combined 8\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+5. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ethtool -L ens5 combined 8\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+6. Scp 1MB file form VM1 to VM2::\r
+\r
+	<VM1># scp <file> root@1.1.1.8:/\r
+\r
+7. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+Test Case 15: PVP split and packed ring dynamic queue number test with dsa dpdk and kernel driver\r
+---------------------------------------------------------------------------------------------------\r
+This case uses testpmd and Traffic Generator(For example, Trex) to test split and packed ring when vhost uses the asynchronous enqueue operations\r
+with dsa dpdk and kernel driver and if the vhost-user can work well when the queue number dynamic change.\r
+\r
+1. bind 2 dsa device to idxd, 2 dsa device to vfio-pci and one nic port to vfio-pci like common step 1-3::\r
+\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1\r
+\r
+	ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch vhost::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 \\r
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0;txq1]' \\r
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+3. Launch virtio-user with split ring mergeable in-order path by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \\r
+	-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+4. Send imix packets from packet generator with random ip, check perforamnce can get target.\r
+\r
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.\r
+\r
+6. Quit and relaunch vhost as below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \\r
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=4,client=1,dmas=[txq0;txq1;txq2;txq3]' \\r
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=4 --rxq=4 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q2,lcore3@0000:ec:01.0-q3]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+7. Send imix packets from packet generator with random ip, check perforamnce can get target.\r
+\r
+8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.\r
+\r
+9. Quit and relaunch vhost as below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \\r
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5]' \\r
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0,lcore3@wq2.2,lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+10. Send imix packets from packet generator with random ip, check perforamnce can get target.\r
+\r
+11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.\r
+\r
+12. Quit and relaunch vhost with diff cahnnels as below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \\r
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \\r
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq0.1,lcore3@wq2.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+13. Send imix packets from packet generator with random ip, check perforamnce can get target.\r
+\r
+14. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.\r
+\r
+15. Quit and relaunch virtio-user with packed ring mergeable in-order path by below command::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \\r
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \\r
+	-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8\r
+	testpmd>set fwd mac\r
+	testpmd>start\r
+\r
+16. Rerun steps 4-5.\r
+\r
+Test Case 16: VM2VM split ring vhost-user/virtio-net non-mergeable 4k-pages 16 queues dsa dpdk and kernel driver test with large packet payload valid check\r
+-------------------------------------------------------------------------------------------------------------------------------------------------------------\r
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in\r
+vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk\r
+and kernel driver. The dynamic change of multi-queues number also test.\r
+\r
+1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 2-3::\r
+\r
+	ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6\r
+	ls /dev/dsa #check wq configure success\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0\r
+\r
+2. Launch the Vhost sample by below commands::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost  \\r
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \\r
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 \\r
+	--lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:ec:01.0-q0,lcore2@0000:ec:01.0-q1,lcore3@wq0.0,lcore3@wq2.0,lcore4@0000:e7:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q4,lcore4@0000:ec:01.0-q5,lcore5@wq4.1,lcore5@wq2.1]\r
+	testpmd>start\r
+\r
+3. Launch VM1 and VM2::\r
+\r
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0,server \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10\r
+\r
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1,server \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12\r
+\r
+4. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ethtool -L ens5 combined 16\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+5. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ethtool -L ens5 combined 16\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+6. Scp 1MB file form VM1 to VM2::\r
+\r
+	<VM1># scp <file>> root@1.1.1.8:/\r
+\r
+7. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+8. Quit vhost ports and relaunch vhost ports w/ diff dsa channels::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \\r
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \\r
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 --lcore-dma=[lcore2@0000:e7:01.0-q2,lcore2@0000:f1:01.0-q3,lcore2@0000:f1:01.0-q1,lcore2@wq4.2,lcore3@wq6.1,lcore3@wq6.3,lcore4@0000:e7:01.0-q2,lcore4@0000:f6:01.0-q5,lcore4@wq4.2,lcore4@wq6.0,lcore5@wq4.2,lcore5@wq6.0]\r
+	testpmd>start\r
+\r
+9. rerun step 6-7.\r
+\r
+10. Quit vhost ports and relaunch vhost ports w/o dsa channels::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0\r
+	testpmd>start\r
+\r
+11. Rerun step 6-7.\r
+\r
+12. Quit vhost ports and relaunch vhost ports with 1 queues::\r
+\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --no-numa --socket-num=0\r
+	testpmd>start\r
+\r
+13. On VM1, set virtio device::\r
+\r
+	<VM1># ethtool -L ens5 combined 1\r
+\r
+14. On VM2, set virtio device::\r
+\r
+	<VM2># ethtool -L ens5 combined 1\r
+\r
+15. Rerun step 5-6.\r
+\r
+Test Case 17: vm2vm packed ring vhost-user/virtio-net mergeable 16 queues dsa dpdk and kernel driver test with large packet payload valid check\r
+--------------------------------------------------------------------------------------------------------------------------------------------------\r
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in\r
+vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk\r
+and kernel driver. The dynamic change of multi-queues number also test.\r
+\r
+1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 2-3::\r
+\r
+	ls /dev/dsa #check wq configure, reset if exist\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 f6:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0\r
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 2\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 4\r
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 6\r
+	ls /dev/dsa #check wq configure success\r
+\r
+2. Launch the Vhost sample by below commands::\r
+\r
+	rm -rf vhost-net*\r
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \\r
+	--vdev 'net_vhost0,iface=vhost-net0,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \\r
+	--vdev 'net_vhost1,iface=vhost-net1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \\r
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 \\r
+	--lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq2.0,lcore2@wq2.1,lcore3@wq0.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:e7:01.0-q4,lcore4@0000:ec:01.0-q5,lcore4@0000:f1:01.0-q1,lcore4@wq2.0,lcore5@wq4.1,lcore5@wq2.0,lcore5@wq4.1,lcore5@wq6.2]\r
+	testpmd>start\r
+\r
+3. Launch VM1 and VM2 with qemu::\r
+\r
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \\r
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net0 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10\r
+\r
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \\r
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \\r
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \\r
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \\r
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \\r
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \\r
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \\r
+	-chardev socket,id=char0,path=./vhost-net1 \\r
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \\r
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12\r
+\r
+4. On VM1, set virtio device IP and run arp protocal::\r
+\r
+	<VM1># ethtool -L ens5 combined 16\r
+	<VM1># ifconfig ens5 1.1.1.2\r
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02\r
+\r
+5. On VM2, set virtio device IP and run arp protocal::\r
+\r
+	<VM2># ethtool -L ens5 combined 16\r
+	<VM2># ifconfig ens5 1.1.1.8\r
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01\r
+\r
+6. Scp 1MB file form VM1 to VM2::\r
+\r
+	<VM1># scp <file>> root@1.1.1.8:/\r
+\r
+7. Check the iperf performance between two VMs by below commands::\r
+\r
+	<VM1># iperf -s -i 1\r
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60\r
+\r
+8. Rerun step 6-7 five times.\r
-- 
2.25.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2022-05-07  9:59 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-07  9:58 [dts][PATCH V1 2/7] test_plans/basic_4k_pages_dsa_test_plan: add basic_4k_pages_dsa testplan Wei Ling

test suite reviews and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \
		dts@dpdk.org
	public-inbox-index dts

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dts


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git