test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH] EEPROM Dump Feature
@ 2020-09-24 16:44 David Liu
  2020-09-29  2:45 ` [dts] [dpdk-dev] " Ma, LihongX
  2020-10-12  8:45 ` Tu, Lijuan
  0 siblings, 2 replies; 3+ messages in thread
From: David Liu @ 2020-09-24 16:44 UTC (permalink / raw)
  To: dts; +Cc: lylavoie, dev, David Liu

add test case and test plan for eeprom dump
compare output result from ethtool and testpmd

Signed-off-by: David Liu <dliu@iol.unh.edu>
---
 test_plans/eeprom_dump_test_plan.rst |  92 ++++++++++++++++++
 tests/TestSuite_eeprom_dump.py       | 139 +++++++++++++++++++++++++++
 2 files changed, 231 insertions(+)
 create mode 100644 test_plans/eeprom_dump_test_plan.rst
 create mode 100644 tests/TestSuite_eeprom_dump.py

diff --git a/test_plans/eeprom_dump_test_plan.rst b/test_plans/eeprom_dump_test_plan.rst
new file mode 100644
index 0000000..3b169c3
--- /dev/null
+++ b/test_plans/eeprom_dump_test_plan.rst
@@ -0,0 +1,92 @@
+.. # BSD LICENSE
+    #
+    # Copyright(c) 2020 Intel Corporation. All rights reserved
+    # Copyright © 2020 The University of New Hampshire. All rights reserved.
+    # All rights reserved.
+    #
+    # Redistribution and use in source and binary forms, with or without
+    # modification, are permitted provided that the following conditions
+    # are met:
+    #
+    #   * Redistributions of source code must retain the above copyright
+    #     notice, this list of conditions and the following disclaimer.
+    #   * Redistributions in binary form must reproduce the above copyright
+    #     notice, this list of conditions and the following disclaimer in
+    #     the documentation and/or other materials provided with the
+    #     distribution.
+    #   * Neither the name of Intel Corporation nor the names of its
+    #     contributors may be used to endorse or promote products derived
+    #     from this software without specific prior written permission.
+    #
+    # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=================
+EEPROM Dump Test
+=================
+
+The EEPROM Dump Test checks the ability to output EEPROM information on
+testpmd when requested. Then compares with output from ethtool to verify
+that both output information is the same. When finished, all the files
+created during testing will be deleted. The difference of the two files
+can be found in the log file.
+
+Prerequisites
+=============
+
+If using vfio the kernel must be >= 3.6+ and VT-d must be enabled in bios.When
+using vfio, use the following commands to load the vfio driver and bind it
+to the device under test::
+
+   modprobe vfio
+   modprobe vfio-pci
+   usertools/dpdk-devbind.py --bind=vfio-pci device_bus_id
+   
+Assuming that ports are up and working, then launch the ``testpmd`` application
+with the following arguments::
+
+   ./build/app/testpmd -- -i --portmask=0x3
+
+Test Case : EEPROM Dump
+=======================
+
+1. Use testpmd to show the EEPROM information on selected port::
+
+    testpmd> show port <PORT_ID> eeprom
+
+2. Quit the testpmd to have access of ethtool, then use ethtool
+   to get EEPROM information on selected port::
+
+    ethtool -e <interface_name> raw on length <length> >> <file_name>.txt
+
+3. Store the output from testpmd and ethtool into two files, then compare both files.
+   Verify they are the same.
+
+4. Delete all the files created during testing.
+
+
+Test Case : Module EEPROM Dump
+===============================
+
+1. Use testpmd to show the EEPROM information on selected port::
+
+    testpmd> show port <PORT_ID> module_eeprom
+
+2. Quit the testpmd to have access of ethtool, then use ethtool
+   to get EEPROM information on selected port::
+
+    ethtool -m <interface_name> raw on length <length> >> <file_name>.txt
+
+3. Store the output from testpmd and ethtool into two files, then compare both files.
+   Verify they are the same.
+
+4. Delete all the files created during testing.
diff --git a/tests/TestSuite_eeprom_dump.py b/tests/TestSuite_eeprom_dump.py
new file mode 100644
index 0000000..8c2bf4c
--- /dev/null
+++ b/tests/TestSuite_eeprom_dump.py
@@ -0,0 +1,139 @@
+#BSD LICENSE
+#
+# Copyright(c) 2020 Intel Corporation. All rights reserved
+# Copyright © 2020 The University of New Hampshire. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+#   * Neither the name of Intel Corporation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+"""
+import utils
+import re
+from pmd_output import PmdOutput
+from test_case import TestCase
+
+
+class TestEEPROMDump(TestCase):
+
+    def set_up_all(self):
+        """
+        Run at the start of each test suite.
+        """
+        self.ports = self.dut.get_ports()
+
+        self.pmdout = PmdOutput(self.dut)
+
+    def set_up(self):
+        """
+        Run before each test case.
+        """
+        pass
+
+    def clean_up_and_compare(self, testname, port):
+        # comapre the two files
+        result = self.dut.send_expect(f"diff testpmd_{testname}_{port}.txt ethtool_{testname}_{port}.txt", "#") 
+
+        # Clean up files
+        self.dut.send_expect(f"rm ethtool_{testname}_raw_{port}.txt", "#")
+        self.dut.send_expect(f"rm ethtool_{testname}_hex_{port}.txt", "#")
+        self.dut.send_expect(f"rm ethtool_{testname}_{port}.txt", "#")
+        self.dut.send_expect(f"rm testpmd_{testname}_{port}.txt", "#")
+
+        self.verify(not result, "Testpmd dumped is not same as linux dumped")
+
+    def dump_to_file(self, regex, get, to):
+            # Get testpmd output to have only hex value
+            for line in re.findall(regex, get):
+                line = line.replace(" ", "").lower()
+                self.dut.send_expect(f"echo {line} >> {to}", "#")
+
+    def check_output(self, testname, ethcommand):
+        self.pmdout.start_testpmd("Default")
+        portsinfo = []
+
+        for port in self.ports:
+            pmdout = self.dut.send_expect(f"show port {port} {testname}", "testpmd>") 
+            self.verify("Finish --" in pmdout, f"{testname} dump failed")
+
+            # get length from testpmd outout
+            length = re.findall(r'(?<=length: )\d+', pmdout)[0]
+
+            # Store the output and length
+            portinfo = {'port': port, 'length' : length, 'pmdout' :pmdout}
+            portsinfo.append(portinfo)
+
+        self.dut.send_expect("quit", "# ")
+
+        # Bind to the default driver to use ethtool after quit testpmd
+        for port in self.ports:
+            netdev = self.dut.ports_info[port]['port']
+            portinfo = portsinfo[port]
+
+            # strip original driver
+            portinfo['ori_driver'] = netdev.get_nic_driver()
+            portinfo['net_dev'] = netdev
+
+            # bind to default driver
+            netdev.bind_driver()
+
+            # get interface
+            iface = netdev.get_interface_name()
+
+            # Get testpmd output to have only hex value
+            self.dump_to_file(r'(?<=: )(.*)(?= \| )', portinfo['pmdout'], f"testpmd_{testname}_{port}.txt")
+
+            self.dut.send_expect(f"ethtool {ethcommand} {iface} raw on length {portinfo['length']} >> ethtool_{testname}_raw_{port}.txt", "#")
+            self.dut.send_expect(f"xxd ethtool_{testname}_raw_{port}.txt >> ethtool_{testname}_hex_{port}.txt", "#")
+            portinfo['ethout'] = self.dut.send_expect(f"cat ethtool_{testname}_hex_{port}.txt", "#")
+            
+            self.dump_to_file(r'(?<=: )(.*)(?=  )', portinfo['ethout'], f"ethtool_{testname}_{port}.txt")
+
+            # Compare the files and delete the files after
+            self.clean_up_and_compare(testname, port)
+
+            # bind to original driver
+            portinfo['net_dev'].bind_driver(portinfo['ori_driver'])
+        
+    def test_eeprom_dump(self):
+        self.check_output("eeprom", "-e")
+
+    def test_module_eeprom_dump(self):
+        self.check_output("module_eeprom", "-m")
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        """
+        self.dut.kill_all()
+
+    def tear_down_all(self):
+        """
+        Run after each test suite.
+        """
+        self.dut.kill_all()
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [dpdk-dev] [PATCH] EEPROM Dump Feature
  2020-09-24 16:44 [dts] [PATCH] EEPROM Dump Feature David Liu
@ 2020-09-29  2:45 ` Ma, LihongX
  2020-10-12  8:45 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Ma, LihongX @ 2020-09-29  2:45 UTC (permalink / raw)
  To: David Liu, dts; +Cc: lylavoie, dev

It seems you cc to the wrong mail.
The prefix of the dts patch is [dts].

Regards,
Ma,lihong

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of David Liu
> Sent: Friday, September 25, 2020 12:45 AM
> To: dts@dpdk.org
> Cc: lylavoie@iol.unh.edu; dev@dpdk.org; David Liu <dliu@iol.unh.edu>
> Subject: [dpdk-dev] [PATCH] EEPROM Dump Feature
> 
> add test case and test plan for eeprom dump compare output result from
> ethtool and testpmd
> 
> Signed-off-by: David Liu <dliu@iol.unh.edu>
> ---
>  test_plans/eeprom_dump_test_plan.rst |  92 ++++++++++++++++++
>  tests/TestSuite_eeprom_dump.py       | 139 +++++++++++++++++++++++++++
>  2 files changed, 231 insertions(+)
>  create mode 100644 test_plans/eeprom_dump_test_plan.rst
>  create mode 100644 tests/TestSuite_eeprom_dump.py


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [dpdk-dev] [PATCH] EEPROM Dump Feature
  2020-09-24 16:44 [dts] [PATCH] EEPROM Dump Feature David Liu
  2020-09-29  2:45 ` [dts] [dpdk-dev] " Ma, LihongX
@ 2020-10-12  8:45 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2020-10-12  8:45 UTC (permalink / raw)
  To: David Liu, dts; +Cc: lylavoie, dev

> add test case and test plan for eeprom dump compare output result from
> ethtool and testpmd
> 
> Signed-off-by: David Liu <dliu@iol.unh.edu>

Applied

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-10-12  8:45 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-24 16:44 [dts] [PATCH] EEPROM Dump Feature David Liu
2020-09-29  2:45 ` [dts] [dpdk-dev] " Ma, LihongX
2020-10-12  8:45 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).