* [dts] [PATCH v1] test_plans: add test plan for virtio pvp regression test
@ 2019-07-07 22:29 Yinan
2019-07-10 5:44 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-07-07 22:29 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
.../virtio_pvp_regression_test_plan.rst | 276 ++++++++++++++++++
1 file changed, 276 insertions(+)
create mode 100644 test_plans/virtio_pvp_regression_test_plan.rst
diff --git a/test_plans/virtio_pvp_regression_test_plan.rst b/test_plans/virtio_pvp_regression_test_plan.rst
new file mode 100644
index 0000000..32374b0
--- /dev/null
+++ b/test_plans/virtio_pvp_regression_test_plan.rst
@@ -0,0 +1,276 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================================
+vhost/virtio-pmd qemu regression test plan
+==========================================
+
+Add feature combind cases to capture regression issue: cover 2 queues + reconnect + multi qemu version + multi-paths with virtio1.0 and virtio0.95.
+
+Test flow
+=========
+
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: pvp test with virtio 0.95 mergeable path
+=====================================================
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Check dut machine already has installed different version qemu, includes [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12, qemu_3.0], launch VM with different qemu version separately::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+
+ ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
+ --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send 64B and 1518B packets by packet generator separately, show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Quit vhost-user, then re-launch, check if the reconnect can work and ensure the traffic can continue.
+
+6. Kill VM, then re-launch VM, check if the reconnect can work and ensure the traffic can continue.
+
+Test Case 2: pvp test with virtio 0.95 normal path
+==================================================
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Check dut machine already has installed different version qemu, includes [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12, qemu_3.0], launch VM with different qemu version separately::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+
+ ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
+ --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send 64B and 1518B packets by packet generator separately, show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Quit vhost-user, then re-launch, check if the reconnect can work and ensure the traffic can continue.
+
+6. Kill VM, then re-launch VM, check if the reconnect can work and ensure the traffic can continue.
+
+Test Case 3: pvp test with virtio 0.95 vrctor_rx path
+=====================================================
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Check dut machine already has installed different version qemu, includes [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12, qemu_3.0], launch VM with different qemu version separately::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+
+ ./testpmd -c 0x7 -n 3 -- -i \
+ --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send 64B and 1518B packets by packet generator separately, show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Quit vhost-user, then re-launch, check if the reconnect can work and ensure the traffic can continue.
+
+6. Kill VM, then re-launch VM, check if the reconnect can work and ensure the traffic can continue.
+
+Test Case 4: pvp test with virtio 1.0 mergeable path
+====================================================
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Check dut machine already has installed different version qemu, includes [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12, qemu_3.0], launch VM with different qemu version separately, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+
+ ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
+ --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send 64B and 1518B packets by packet generator separately, show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Quit vhost-user, then re-launch, check if the reconnect can work and ensure the traffic can continue.
+
+6. Kill VM, then re-launch VM, check if the reconnect can work and ensure the traffic can continue.
+
+Test Case 5: pvp test with virtio 1.0 normal path
+=================================================
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Check dut machine already has installed different version qemu, includes [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12, qemu_3.0], launch VM with different qemu version separately, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+
+ ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
+ --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send 64B and 1518B packets by packet generator separately, show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Quit vhost-user, then re-launch, check if the reconnect can work and ensure the traffic can continue.
+
+6. Kill VM, then re-launch VM, check if the reconnect can work and ensure the traffic can continue.
+
+Test Case 6: pvp test with virtio 1.0 vrctor_rx path
+====================================================
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Check dut machine already has installed different version qemu, includes [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12, qemu_3.0], launch VM with different qemu version separately, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+
+ ./testpmd -c 0x7 -n 3 -- -i \
+ --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send 64B and 1518B packets by packet generator separately, show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Quit vhost-user, then re-launch, check if the reconnect can work and ensure the traffic can continue.
+
+6. Kill VM, then re-launch VM, check if the reconnect can work and ensure the traffic can continue.
\ No newline at end of file
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans: add test plan for virtio pvp regression test
2019-07-07 22:29 [dts] [PATCH v1] test_plans: add test plan for virtio pvp regression test Yinan
@ 2019-07-10 5:44 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-07-10 5:44 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied ,thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, July 8, 2019 6:29 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: add test plan for virtio pvp regression
> test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../virtio_pvp_regression_test_plan.rst | 276 ++++++++++++++++++
> 1 file changed, 276 insertions(+)
> create mode 100644 test_plans/virtio_pvp_regression_test_plan.rst
>
> diff --git a/test_plans/virtio_pvp_regression_test_plan.rst
> b/test_plans/virtio_pvp_regression_test_plan.rst
> new file mode 100644
> index 0000000..32374b0
> --- /dev/null
> +++ b/test_plans/virtio_pvp_regression_test_plan.rst
> @@ -0,0 +1,276 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==========================================
> +vhost/virtio-pmd qemu regression test plan
> +==========================================
> +
> +Add feature combind cases to capture regression issue: cover 2 queues +
> reconnect + multi qemu version + multi-paths with virtio1.0 and virtio0.95.
> +
> +Test flow
> +=========
> +
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +Test Case 1: pvp test with virtio 0.95 mergeable path
> +=====================================================
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --
> rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Check dut machine already has installed different version qemu, includes
> [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12,
> qemu_3.0], launch VM with different qemu version separately::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net,server \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2
> \
> + -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,mq=on,vectors=15 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> +
> + ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
> + --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send 64B and 1518B packets by packet generator separately, show
> throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Quit vhost-user, then re-launch, check if the reconnect can work and
> ensure the traffic can continue.
> +
> +6. Kill VM, then re-launch VM, check if the reconnect can work and ensure
> the traffic can continue.
> +
> +Test Case 2: pvp test with virtio 0.95 normal path
> +==================================================
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --
> rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Check dut machine already has installed different version qemu, includes
> [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12,
> qemu_3.0], launch VM with different qemu version separately::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net,server \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2
> \
> + -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=10
> 24,tx_queue_size=1024,mq=on,vectors=15 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> +
> + ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
> + --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send 64B and 1518B packets by packet generator separately, show
> throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Quit vhost-user, then re-launch, check if the reconnect can work and
> ensure the traffic can continue.
> +
> +6. Kill VM, then re-launch VM, check if the reconnect can work and ensure
> the traffic can continue.
> +
> +Test Case 3: pvp test with virtio 0.95 vrctor_rx path
> +=====================================================
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --
> rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Check dut machine already has installed different version qemu, includes
> [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12,
> qemu_3.0], launch VM with different qemu version separately::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net,server \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2
> \
> + -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=10
> 24,tx_queue_size=1024,mq=on,vectors=15 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> +
> + ./testpmd -c 0x7 -n 3 -- -i \
> + --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send 64B and 1518B packets by packet generator separately, show
> throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Quit vhost-user, then re-launch, check if the reconnect can work and
> ensure the traffic can continue.
> +
> +6. Kill VM, then re-launch VM, check if the reconnect can work and ensure
> the traffic can continue.
> +
> +Test Case 4: pvp test with virtio 1.0 mergeable path
> +====================================================
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --
> rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Check dut machine already has installed different version qemu, includes
> [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12,
> qemu_3.0], launch VM with different qemu version separately, note: we
> need add "disable-modern=false" to enable virtio 1.0::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net,server \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2
> \
> + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,mq=o
> n,vectors=15 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> +
> + ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
> + --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send 64B and 1518B packets by packet generator separately, show
> throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Quit vhost-user, then re-launch, check if the reconnect can work and
> ensure the traffic can continue.
> +
> +6. Kill VM, then re-launch VM, check if the reconnect can work and ensure
> the traffic can continue.
> +
> +Test Case 5: pvp test with virtio 1.0 normal path
> +=================================================
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --
> rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Check dut machine already has installed different version qemu, includes
> [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12,
> qemu_3.0], launch VM with different qemu version separately, note: we
> need add "disable-modern=false" to enable virtio 1.0::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net,server \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2
> \
> + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=o
> n,vectors=15 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> +
> + ./testpmd -c 0x7 -n 4 -- -i --enable-hw-vlan-strip\
> + --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send 64B and 1518B packets by packet generator separately, show
> throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Quit vhost-user, then re-launch, check if the reconnect can work and
> ensure the traffic can continue.
> +
> +6. Kill VM, then re-launch VM, check if the reconnect can work and ensure
> the traffic can continue.
> +
> +Test Case 6: pvp test with virtio 1.0 vrctor_rx path
> +====================================================
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --
> rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Check dut machine already has installed different version qemu, includes
> [qemu_2.7, qemu_2.8, qemu_2.9, qemu_2.10, qemu_2.11, qemu_2.12,
> qemu_3.0], launch VM with different qemu version separately, note: we
> need add "disable-modern=false" to enable virtio 1.0::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 3 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net,server \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2
> \
> + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=o
> n,vectors=15 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> +
> + ./testpmd -c 0x7 -n 3 -- -i \
> + --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send 64B and 1518B packets by packet generator separately, show
> throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Quit vhost-user, then re-launch, check if the reconnect can work and
> ensure the traffic can continue.
> +
> +6. Kill VM, then re-launch VM, check if the reconnect can work and ensure
> the traffic can continue.
> \ No newline at end of file
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-07-10 5:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-07 22:29 [dts] [PATCH v1] test_plans: add test plan for virtio pvp regression test Yinan
2019-07-10 5:44 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).