test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v1] test_plans: add virtio ci test for performance track
@ 2020-01-12 20:29 Yinan
  2020-01-13  7:52 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-01-12 20:29 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

add vhost/virtio pvp and loopback basic test for performance track in CI

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 test_plans/perf_virtio_user_loopback.rst | 292 +++++++++++++++++++++++
 test_plans/perf_virtio_user_pvp.rst      | 191 +++++++++++++++
 2 files changed, 483 insertions(+)
 create mode 100644 test_plans/perf_virtio_user_loopback.rst
 create mode 100644 test_plans/perf_virtio_user_pvp.rst

diff --git a/test_plans/perf_virtio_user_loopback.rst b/test_plans/perf_virtio_user_loopback.rst
new file mode 100644
index 0000000..62ca31a
--- /dev/null
+++ b/test_plans/perf_virtio_user_loopback.rst
@@ -0,0 +1,292 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===========================================
+vhost/virtio multi-paths loopback test plan
+===========================================
+
+Benchmark vhost/virtio-user loopback test with 9 tx/rx paths.
+Includes split ring mergeable, non-mergeable, vector_rx, inorder mergeable,
+inorder non-mergeable, packed ring mergeable, packed ring non-mergeable，
+packed ring inorder mergeable, packed ring inorder non-mergeable path.
+
+Test Case 1: loopback test with packed ring mergeable path
+==========================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 2: loopback test with packed ring non-mergeable path
+==============================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd, [frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 3: loopback test with packed ring inorder mergeable path
+===================================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 4: loopback test with packed ring inorder non-mergeable path
+======================================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 5: loopback test with split ring mergeable path
+==========================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 6: loopback test with split ring non-mergeable path
+=============================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 7: loopback test with split ring vector_rx path
+=========================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+    -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 8: loopback test with split ring inorder mergeable path
+=================================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 9: loopback test with split ring inorder non-mergeable path
+=====================================================================
+
+1. Launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem --no-pci \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+    testpmd>set txpkts [frame_size]
+    testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+    testpmd>show port stats all
\ No newline at end of file
diff --git a/test_plans/perf_virtio_user_pvp.rst b/test_plans/perf_virtio_user_pvp.rst
new file mode 100644
index 0000000..11c1550
--- /dev/null
+++ b/test_plans/perf_virtio_user_pvp.rst
@@ -0,0 +1,191 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+======================================
+vhost/virtio pvp performance test plan
+======================================
+
+Benchmark PVP performance with split ring mergeable path and packed ring mergeable path.
+For basic pvp test，give 1 core for vhost and virtio respectively.
+For virtio single core performance test，give 2 cores for vhost and 1 core for virtio,
+set io fwd at vhost side to lower the vhost workload.
+For vhost single core performance test，give 2 cores for virtio and 1 core for vhost,
+set io fwd at virtio side to lower the virtio workload.
+
+Test flow
+=========
+
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: pvp test with packed ring mergeable path
+=====================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-3  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
+    -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 2: virtio single core performance test with packed ring mergeable path
+=================================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+    testpmd>set fwd io
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 3: vhost single core performance test with packed ring mergeable path
+===============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 4: pvp test with split ring mergeable path
+====================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
+    -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 5: virtio single core performance test with split ring mergeable path
+===============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+    testpmd>set fwd io
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+    testpmd>show port stats all
+
+Test Case 6: vhost single core performance test with split ring mergeable path
+==============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+    testpmd>show port stats all
\ No newline at end of file
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-13  7:52 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-12 20:29 [dts] [PATCH v1] test_plans: add virtio ci test for performance track Yinan
2020-01-13  7:52 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).