test suite reviews and discussions
 help / color / Atom feed
* [dts] [PATCH]test_plans: change rss command due to dpdk code change
@ 2020-06-09 13:03 Peng Yuan
  2020-06-11 13:22 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Peng Yuan @ 2020-06-09 13:03 UTC (permalink / raw)
  To: dts; +Cc: Peng Yuan

change rss command due to dpdk code change
devide the i40e cases and ixgbe/igb cases

Signed-off-by: Peng Yuan <yuan.peng@intel.com>

diff --git a/test_plans/rss_to_rte_flow_test_plan.rst b/test_plans/rss_to_rte_flow_test_plan.rst
index d91484a..0e33f11 100644
--- a/test_plans/rss_to_rte_flow_test_plan.rst
+++ b/test_plans/rss_to_rte_flow_test_plan.rst
@@ -50,7 +50,7 @@ Prerequisites
 =============
 
 1. Hardware:
-   Fortville/82599/I350
+   I40E/IXGBE/IGB driver NIC
 
 2. Software:
    dpdk: http://dpdk.org/git/dpdk
@@ -66,13 +66,21 @@ Prerequisites
     pkt2 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.2")/UDP(dport=50, sport=50)/("X"*48)
     pkt3 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.3")/TCP(dport=50, sport=50)/("X"*48)
     pkt4 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.2")/("X"*48)
-    pkt5 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2",nh=132)/SCTP(dport=80, sport=80)/("X"*48)
-    pkt6 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/UDP(dport=50, sport=50)/("X"*48)
-    pkt7 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/TCP(dport=50, sport=50)/("X"*48)
-    pkt8 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/("X"*48)
-
-Test case: disable and enable rss
-=================================
+    pkt5 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.2", frag=1)/Raw("X"*48)
+    pkt6 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2",nh=132)/SCTP(dport=80, sport=80)/("X"*48)
+    pkt7 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/UDP(dport=50, sport=50)/("X"*48)
+    pkt8 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/TCP(dport=50, sport=50)/("X"*48)
+    pkt9 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/("X"*48)
+    pkt10 = Ether(dst="00:00:00:00:01:00")/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020", nh=44)/("X"*48)
+    pkt11 = Ether(dst="00:00:00:00:01:00", type=0x0807)/Raw(load="\x61\x62\x63\x64")
+
+5. The rss setting commands are different between i40e driver and ixgbe/igb driver.
+   So design different cases on i40e/ixgbe/igb.
+
+I40E Cases
+==========
+Test case: set rss types on two ports (I40E)
+============================================
 
 1. Start the testpmd::
 
@@ -87,73 +95,118 @@ Test case: disable and enable rss
     RSS functions:
      ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to all the four queues.
+    testpmd> show port 1 rss-hash
+    RSS functions:
+     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-3. disable all RSS fuctions::
+   Send the ipv4-other/ipv4-frag/ipv6-other/ipv6-frag packets with different src/dst ip address to two ports.
+   All the packets are distributed to all the four queues of two ports.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to two ports.
+   All the packets are distributed to queue 0 on two ports.
 
-    testpmd> flow create 0 ingress pattern end actions rss types none end / end
+3. Enable ipv4-udp RSS function on port 0::
+
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
     Flow rule #0 created
+
     testpmd> show port 0 rss-hash
-    RSS disabled
+    RSS functions:
+     ipv4-udp udp
 
-   Send the ipv4-udp packets with different src/dst ip address.
-   All the packets are distributed to queue 0.
-   Notes: only i40e support the command,
-   others don't support the command created.
+    testpmd> show port 1 rss-hash
+    RSS functions:
+     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-4. enable RSS fuction with all RSS hash type::
 
-    testpmd> flow create 0 ingress pattern end actions rss types all end / end
-    Flow rule #1 created
-    testpmd> show port 0 rss-hash
+   Send the ipv4-other/ipv4-frag/ipv6-other/ipv6-frag packets with different src/dst ip address to two ports.
+   All the packets to port 0 are distributed to queue 0.
+   All the packets to port 1 are distributed to all the four queues
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to two ports.
+   All the packets to port 0 are distributed to all the four queues.
+   All the packets to port 1 are distributed to queue 0
+
+4. enable RSS fuction with all RSS hash type on port 1::
+
+    testpmd> flow create 1 ingress pattern eth / end actions rss types l2-payload end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / end actions rss types ipv4-other end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / end actions rss types ipv4-frag end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / sctp / end actions rss types ipv4-sctp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss types ipv6-other end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss types ipv6-frag end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / udp / end actions rss types ipv6-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / tcp / end actions rss types ipv6-tcp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / sctp / end actions rss types ipv6-sctp end queues end / end
+
+   all the rules can be created successfully.
+   then check the rule list::
+
+    testpmd> flow list 1
+
+   there are 11 rules listed correctly.
+   then show the port RSS function::
+
+    testpmd> show port 1 rss-hash
     RSS functions:
      all ipv4-frag ipv4-tcp ipv4-udp ipv4-sctp ipv4-other ipv6-frag ipv6-tcp ipv6-udp ipv6-sctp ipv6-other l2-payload ip udp tcp sctp
 
-   Send the ipv4-udp packets with different src/dst ip address.
-   All the packets are distributed to all the four queues.
+   Send the ipv4-other/ipv4-frag/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address or different sport/dport to port 1.
+   All the packets are distributed to all the four queues of port 1.
+   Send same packets to port 0.
+   ipv4-udp packets are distributed to all the queues of port 0.
+   other packets are distributed to queue 0.
 
-Notes: the default RSS functions are different among several NICs.
-Here shows the printing of NIC with i40e driver.
+5. enable RSS fuction with all RSS hash type on port 0, all the rules can be created successfully.
+   Send same packets to port 0.
+   All the packets are distributed to all the four queues of port 0.
+   Send same packets to port 1.
+   All the packets are distributed to all the four queues of port 1.
 
-Test case: enable ipv4-udp rss
-==============================
+6. delete rule 0/2/10 of port 1::
 
-1. Start the testpmd::
+    testpmd> flow destroy 1 rule 0
+    testpmd> flow destroy 1 rule 2
+    testpmd> flow destroy 1 rule 10
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
-    testpmd> set fwd rxonly
-    testpmd> set verbose 1
-    testpmd> start
+   list the rules on port 1, other rules can be listed.
+   Send same packets to port 0.
+   All the packets are distributed to all the four queues of port 0.
+   Send same packets to port 1.
+   L2-payload/ipv4-frag/ipv6-sctp are distributed to queue 0 of port 1.
+   Other packets are distributed to all the four queues of port 1.
 
-2. Show port default RSS fuctions::
+7. disable RSS fuction with all RSS hash type on port 0::
 
+    testpmd> flow flush 0
     testpmd> show port 0 rss-hash
-    RSS functions:
-     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
+    RSS disabled
 
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to all the four queues.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
+   Send same packets to port 0.
    All the packets are distributed to queue 0.
-   Notes: different NICs has different default RSS type function.
-   the result is for i40e.
+   Send same packets to port 1.
+   L2-payload/ipv4-frag/ipv6-sctp are distributed to queue 0 of port 1.
+   Other packets are distributed to all the four queues of port 1.
 
-3. Enable ipv4-udp, and set all the queues into RSS queue rule::
+8. disable RSS fuction with all RSS hash type on port 1::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end / end
-    Flow rule #0 created
-    testpmd> show port 0 rss-hash
-    RSS functions:
-     ipv4-udp udp
+    testpmd> flow flush 1
+    testpmd> show port 1 rss-hash
+    RSS disabled
 
-   Send the ipv4-other packets with different src/dst ip address.
+   Send same packets to port 0.
+   All the packets are distributed to queue 0.
+   Send same packets to port 1.
    All the packets are distributed to queue 0.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
-   All the packets are distributed to all the four queues.
 
-Test case: set valid and invalid queue
-======================================
+   Notes: only i40e support the command,
+   others don't support the command created.
+
+Notes: the default RSS functions are different among several NICs.
+Here shows the printing of NIC with i40e driver.
+
+Test case: set rss queues on two ports (I40E)
+=============================================
 
 1. Start the testpmd::
 
@@ -162,77 +215,187 @@ Test case: set valid and invalid queue
     testpmd> set verbose 1
     testpmd> start
 
-2. Set queue 0, 8 and 15 into RSS queue rule::
+2. Set queue 0, 8 and 15 into RSS queue rule on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 0 8 15 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 0 8 15 end / end
 
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to queue 0/8/15.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
-   All the packets are distributed to queue 0.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to all queues of port 1.
 
-3. Set a second RSS queue rule::
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to port 0 and port 1.
+   All the packets are distributed to queue 0 of both ports.
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 3 end / end
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 3 end / end
+3. Set a RSS queue rule on port 1::
 
-   The two rules failed to be created.
-   There can't be more than one RSS queue rule.
+    testpmd> flow create 1 ingress pattern end actions rss types end queues 3 end / end
 
-4. Reset the RSS queue rule::
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 3 of port 1.
+
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to port 0 and port 1.
+   All the packets are distributed to queue 0 of both ports.
+
+4. Set a second RSS queue rule on port 1::
+
+    testpmd> flow create 1 ingress pattern end actions rss types end queues 0 8 15 end / end
+
+   The rule is set successfully. list the rules::
+
+    testpmd> flow list 1
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     => RSS
+    1       0       0       i--     => RSS
+
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 0/8/15 of port 1.
+
+Notes: rule 1 conflicts with rule 0, rule 1 will overlap the rule 0.
+
+5. delete rule 0 of port 0::
 
     testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 3 end / end
 
-   The rule is set successfully.
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to queue 0.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
-   All the packets are distributed to queue 0/8/15.
+   there is no rule listed on port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to all queues of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 0/8/15 of port 1.
 
-5. Set a wrong parameter: queue ID is 16 ::
+6. Set a RSS queue rule on port 0 again::
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 16 end / end
+     testpmd> flow create 0 ingress pattern end actions rss types end queues 0 8 15 end / end
 
-   The rule failed to be created.
+   delete rule 1 of port 1::
 
-6. Set all the queues to the rule::
+    testpmd> flow destroy 1 rule 1
+    testpmd> flow list 1
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     => RSS
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 end / end
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to all queues of port 1.
+
+7. Set a RSS queue rule on port 1 again::
+
+    testpmd> flow create 1 ingress pattern end actions rss types end queues 3 end / end
+
+   deleate rule 0 of port 1::
+
+    testpmd> flow destroy 1 rule 0
+    testpmd> flow list 1
+    ID      Group   Prio    Attr    Rule
+    1       0       0       i--     => RSS
+
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 3 of port 1.
+
+8. Flush rules on port 1::
+
+    testpmd> flow flush 1
+
+   there is no rule listed on port 1.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to all queues of port 1.
+
+9. Set a wrong parameter: queue ID is 16 ::
+
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 16 end / end
+
+   Fail to create the rule, report message::
+
+    queue id > max number of queues: Invalid argument
+
+10. Set all the queues to the rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 end / end
 
    Send the ipv4-other packets with different src/dst ip address.
-   The packets may be distributed to any of the queue 0-15.
+   All the packets are distributed to all queues.
 
 Notes: The max queue number may be different in different NIC types.
 We can set different queue number in command line with different NIC types.
 
-Test case: Different packet types
-=================================
+Test case: set rss types and rss queues on two ports (I40E)
+===========================================================
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=8 --txq=8 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
 
-2. Set queue 1, 8 and 15 into RSS queue rule::
+2. Show port default RSS fuctions on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss types udp ipv4-tcp ipv6-sctp ipv4-other end queues 1 8 15 end / end
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-3. Send the eight packets to port 0.
-   pkt2/pkt3/pkt4/pkt5/pkt6 are distributed to queue 1/8/15.
-   Other packets are distributed to queue 0.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to all the four queues.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport port 0.
+   All the packets are distributed to queue 0.
 
-4. Set a different packet type RSS queue rule::
+Notes: different NICs has different default RSS type function.
+the result is for i40e.
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv6-other end queues 3 end / end
+3. Enable ipv4-udp, and set queue 0 2 7 into RSS queue rule::
 
-   The rule failed to be created.
-   There can't be more than one RSS queue rule.
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    Flow rule #0 created
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 0 2 7 end / end
+    Flow rule #1 created
 
-Test case: disable rss in command-line
-======================================
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     ipv4-udp udp
+
+   Send the ipv4-other packets with different src/dst ip address to two ports.
+   All the packets to queue 0 are distributed to queue 0.
+   All the packets to queue 1 are distributed to all queue.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to two ports.
+   All the packets to queue 0 are distributed to queue 0/2/7.
+   All the packets to queue 1 are distributed to queue 0.
+
+4. Enable ipv4-udp/ipv4-tcp/ipv6-other/ipv6-sctp/ipv6-udp RSS type, and set a RSS queue rule on port 1::
+
+     testpmd> flow create 1 ingress pattern end actions rss types end queues 1 4 7 end / end
+     testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss types ipv6-other end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv6 / sctp / end actions rss types ipv6-sctp end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv6 / udp / end actions rss types ipv6-udp end queues end / end
+
+5. Send the eight packets to two ports.
+   ipv4-udp packet to port 0 is distributed to queue 0/2/7.
+   Other packets to port 0 are distributed to queue 0.
+   ipv4-udp/ipv4-tcp/ipv6-other/ipv6-sctp/ipv6-udp to port 1 are distributed to queue 1/4/7.
+   Other packets to port 1 are distributed to queue 0.
+
+6. Set a different RSS queue rule on port 1::
+
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 3 end / end
+
+   Send the eight packets to port 0.
+   get same result with step 5.
+   Send the eight packets to port 1.
+   ipv4-udp/ipv4-tcp/ipv6-other/ipv6-sctp/ipv6-udp to port 1 are distributed to queue 3.
+   Other packets are distributed to queue 0.
+
+Test case: disable rss in command-line (I40E)
+=============================================
 
 1. Start the testpmd::
 
@@ -240,34 +403,66 @@ Test case: disable rss in command-line
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
+    testpmd> show port 0 rss-hash
+    RSS disabled
 
-2. Send the eight packets to port 0.
+2. Send the eight packets to port 0 and port 1
    All the packets are distributed to queue 0.
 
-3. enable all RSS function type::
+3. enable ipv4-udp and ipv6-tcp RSS function type on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss types all end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 0 ingress pattern eth / ipv6 / tcp / end actions rss types ipv6-tcp end queues end / end
 
    Send the eight packets to port 0.
-   All the packets are distributed to any of queue 0-7
+   ipv4-udp/ipv6-tcp packets are distributed to all queues.
+   Other packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   All packets are distributed to queue 0.
 
-   or set the RSS queue rule::
+4. set queue 1, 4, 7 into RSS queue rule on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv6-tcp ipv4-udp sctp ipv6-other end queues 5 6 7 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 1 4 7 end / end
 
    Send the eight packets to port 0.
-   pkt1/pkt2/pkt5/pkt7/pkt8 are distributed to queue 5/6/7.
+   ipv4-udp/ipv6-tcp packets are distributed to queue 1/4/7.
    Other packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   All packets are distributed to queue 0.
 
-4. Clean the rule::
+5. enable ipv4-udp and ipv6-other RSS function type on port 1::
+
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss types ipv6-other end queues end / end
+
+   Send the eight packets to port 0.
+   ipv4-udp/ipv6-tcp packets are distributed to queue 1/4/7.
+   Other packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   ipv4-udp/ipv6-other packets are distributed to queue 0-7.
+   Other packets are distributed to queue 0.
+
+6. Clean the rules of port 0::
 
     testpmd> flow flush 0
 
    Send the eight packets to port 0.
    All the packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   ipv4-udp/ipv6-other packets are distributed to queue 0-7.
+   Other packets are distributed to queue 0.
 
-Test case: set key and key_len
-==============================
+   Clean the rules of port 1::
+
+    testpmd> flow flush 1
+
+   Send the eight packets to port 0.
+   All the packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   All the packets are distributed to queue 0.
+
+Test case: set key and key_len (I40E)
+=====================================
 
 Only i40e support key and key_len setting.
 
@@ -280,14 +475,20 @@ Only i40e support key and key_len setting.
 
 2. Set ipv4-udp RSS and show the default RSS key::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
     testpmd> show port 0 rss-hash key
     RSS functions:
      ipv4-udp udp
     RSS key:
     74657374706D6427732064656661756C74205253532068617368206B65792C206F7665727269646520697420666F722062657474
+    testpmd> show port 1 rss-hash key
+    RSS functions:
+     ipv4-udp udp
+    RSS key:
+    74657374706D6427732064656661756C74205253532068617368206B65792C206F7665727269646520697420666F722062657474
 
-   Send the five packets to port 0::
+   Send the five packets to port 0 and port 1::
 
     pkt1 = Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0',dst='4.0.0.0')/UDP(sport=100,dport=200)/('X'*48)
     pkt2 = Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0',dst='4.0.0.0')/UDP(sport=100,dport=201)/('X'*48)
@@ -301,10 +502,9 @@ Only i40e support key and key_len setting.
    pkt4 is distributed to queue 1.
    pkt5 is distributed to queue 2.
 
-3. Set ipv4-udp key::
+3. Set ipv4-udp key on port 0::
 
-    testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end key \
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end key \
     1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678901234567890FFFFFFFFFFFF / end
     testpmd> show port 0 rss-hash key
     RSS functions:
@@ -318,11 +518,11 @@ Only i40e support key and key_len setting.
    pkt3 is distributed to queue 2.
    pkt4 is distributed to queue 0.
    pkt5 is distributed to queue 3.
+   Send the same five packets to port 1, they are distributed to same queues with step 2.
 
 4. Set ipv4-udp with truncating key_len::
 
-    testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end key \
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end key \
     1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678901234567890FFFFFFFFFFFF key_len 50 / end
     testpmd> show port 0 rss-hash key
     RSS functions:
@@ -336,6 +536,7 @@ Only i40e support key and key_len setting.
    pkt3 is distributed to queue 0.
    pkt4 is distributed to queue 1.
    pkt5 is distributed to queue 0.
+   Send the same five packets to port 1, they are distributed to same queues with step 2.
 
    The key length is 52 bytes, if setting it shorter than 52, the key value doesn't take effect.
    The showed key value is an invalid value, not the default value.
@@ -343,8 +544,7 @@ Only i40e support key and key_len setting.
 
 5. Set ipv4-udp with padding key_len::
 
-    testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end key \
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end key \
     1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678901234567890FFFFFF key_len 52 / end
     testpmd> show port 0 rss-hash key
     RSS functions:
@@ -358,12 +558,31 @@ Only i40e support key and key_len setting.
    pkt3 is distributed to queue 2.
    pkt4 is distributed to queue 0.
    pkt5 is distributed to queue 3.
+   Send the same five packets to port 1, they are distributed to same queues with step 2.
 
    The lengh of key is 49 bytes, but the key_len is 52,
    so the last three bytes of key is padded by default value.
 
-Test case: Flow directory rule and RSS rule combination
-=======================================================
+6. Set ipv4-udp key on port 1::
+
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end key \
+    1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678909876543210EEEEEEEEEEEE / end
+    testpmd> show port 1 rss-hash key
+    RSS functions:
+     ipv4-udp udp
+    RSS key:
+    1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678909876543210EEEEEEEEEEEE
+
+   Send the same five packets to port 0, they are distributed to same queues with step 5.
+   Send the same five packets to port 1,
+   pkt1 is distributed to queue 3.
+   pkt2 is distributed to queue 2.
+   pkt3 is distributed to queue 2.
+   pkt4 is distributed to queue 0.
+   pkt5 is distributed to queue 3.
+
+Test case: Flow directory rule and RSS rule combination (I40E)
+==============================================================
 
 1. Start the testpmd::
 
@@ -374,9 +593,10 @@ Test case: Flow directory rule and RSS rule combination
 
 2. Set a RSS queue rule::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 6 7 8 end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 6 7 8 end / end
 
-   Send pkt2 to port 0, pkt2 is distributed to queue 8.
+   Send ipv4-udp packet to port 0, distributed to queue 8.
 
 3. Set a flow directory rule::
 
@@ -386,13 +606,13 @@ Test case: Flow directory rule and RSS rule combination
 
 4. Destroy the flow directory rule::
 
-    testpmd> flow destroy 0 rule 1
+    testpmd> flow destroy 0 rule 2
 
    Send pkt2 to port 0, pkt2 is distributed to queue 8 again.
    So flow directory filter is priority to RSS hash filter.
 
-Test case: Set queue-region generic flow api
-==============================================
+Test case: Set queue-region with rte_flow api (I40E)
+===================================================
  
 1. Start the testpmd::
 
@@ -403,7 +623,8 @@ Test case: Set queue-region generic flow api
 
 2. Set a RSS queue rule::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-tcp end queues 7 8 10 11 12 14 15 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 7 8 10 11 12 14 15 end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp end queues end / end
 
 3. Send pkt to port 0::
 
@@ -430,23 +651,25 @@ Test case: Set queue-region generic flow api
     testpmd> flow list 0
     ID      Group   Prio    Attr    Rule
     0       0       0       i-      => RSS
-    1       0       0       i-      VLAN => RSS
+    1       0       0       i-      ETH IPV4 TCP => RSS
     2       0       0       i-      VLAN => RSS
     3       0       0       i-      VLAN => RSS
+    4       0       0       i-      VLAN => RSS
 
-    testpmd> flow destroy 0 rule 2
-    Flow rule #2 destroyed
+    testpmd> flow destroy 0 rule 3
+    Flow rule #3 destroyed
     testpmd> flow list 0
     ID      Group   Prio    Attr    Rule
     0       0       0       i-      => RSS
-    1       0       0       i-      VLAN => RSS
-    3       0       0       i-      VLAN => RSS
+    1       0       0       i-      ETH IPV4 TCP => RSS
+    2       0       0       i-      VLAN => RSS
+    4       0       0       i-      VLAN => RSS
 
-   Send the 3 packets to port 0. They are all distributed to queue 0.
+   Send the 3 packets to port 0. They are all distributed to queue 8.
    Queue region only can be deleted all or none.
 
-Test case: Set queue region with invalid parameter
-==================================================
+Test case: Set queue region in rte_flow with invalid parameter (I40E)
+=====================================================================
 
 1. Start the testpmd::
 
@@ -455,30 +678,40 @@ Test case: Set queue region with invalid parameter
     testpmd> set verbose 1
     testpmd> start
 
-2. Set a RSS queue rule::
+2. Set a queue region::
+
+    testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 10 11 end / end
+    port_flow_complain(): Caught PMD error type 16 (specific action): cause: 0x7ffeb4a60fd8, no valid queues: Invalid argument
+
+3. Set a RSS queue rule first::
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 8 10 11 12 15 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 8 10 11 12 15 end / end
 
-3. Set invalid queue ID "9" to queue region::
+4. Set invalid queue ID "9" to queue region::
 
     testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 8 9 end / end
     Caught error type 11 (specific action): cause: 0x7ffda008efe8, no valid queues
 
    Queue of queue region must be included in rss function appointed queue.
 
-4. Set discontinuous queue ID to queue region::
+5. Set discontinuous queue ID to queue region::
 
     testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 8 10 end / end
     Caught error type 11 (specific action): cause: 0x7ffda008efe8, no valid queues
 
-5. Set invalid queue number to queue region::
+6. Set invalid queue number to queue region::
 
     testpmd> flow create 0 ingress pattern vlan tci is 0x4000 / end actions rss queues 10 11 12 end / end
     i40e_flow_parse_rss_action(): The region sizes should be any of the following values: 1, 2, 4, 8, 16, 32, 64 as long as the total number of queues do not exceed the VSI allocation
     Caught error type 2 (flow rule (handle)): Failed to create flow.
 
-Test case: Queue region and RSS rule combination
-=========================================================
+7. Set a queue region::
+
+    testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 10 11 end / end
+    Flow rule #1 created
+
+Test case: Queue region and RSS rule combination (I40E)
+=======================================================
 
 Notes: Queue region is only supported by fortville, so this case only can
 be implemented with fortville.
@@ -486,7 +719,7 @@ be implemented with fortville.
 1. Start the testpmd::
 
     ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
-    testpmd> port config all rss all
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -497,17 +730,246 @@ be implemented with fortville.
     testpmd> set port 0 queue-region region_id 0 flowtype 31
     testpmd> set port 0 queue-region flush on
 
-   Send pkt2 to port 0. It is distributed to queue 1.
+   Send ipv4-udp packet to port 0. It is distributed to queue 1.
 
 3. Set a RSS queue rule::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 6 7 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 6 7 end / end
 
-   Send pkt2 to port 0. It is still distributed to queue 1.
+   Send ipv4-udp packet to port 0. It is still distributed to queue 1.
 
 4. flush the queue region::
 
     testpmd> set port 0 queue-region flush off 
 
-   Send pkt2 to port 0. It is distributed to queue 7.
+   Send ipv4-udp packet to port 0. It is distributed to queue 7.
    Queue region is priority to RSS queue rule.
+
+
+IXGBE/IGB cases
+===============
+IXGBE/IGB doesn't support L2-payload ptype.
+
+Test case: disable and enable rss
+=================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Show port default RSS fuctions::
+
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv6 ipv6-ex ip
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to all the four queues.
+
+3. disable all RSS fuctions::
+
+    testpmd> flow create 0 ingress pattern end actions rss types none end / end
+    Flow rule #0 created
+    testpmd> show port 0 rss-hash
+    RSS disabled
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+
+4. enable RSS fuction with all RSS hash type::
+
+    testpmd> flow create 0 ingress pattern end actions rss types all end / end
+    Flow rule #1 created
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp ipv6-ex ipv6-tcp-ex ipv6-udp-ex ip udp tcp
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to all the four queues.
+
+Notes: the default RSS functions may be different among several NICs.
+
+Test case: enable ipv4-udp rss
+==============================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Show port default RSS fuctions::
+
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv6 ipv6-ex ip
+
+3. Enable ipv4-udp, and set all the queues into RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end / end
+    Flow rule #0 created
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4-udp udp
+
+   Send the ipv4-other/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport.
+   All the packets are distributed to all the four queues.
+
+Test case: set rss valid/invalid queue rule
+===========================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Set queue 0, 8 and 15 into RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss queues 0 8 15 end / end
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0/8/15.
+
+3. Set a second RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss queues 3 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 3 end / end
+
+   The two rules failed to be created.
+   There can't be more than one RSS queue rule.
+
+4. Reset the RSS queue rule::
+
+    testpmd> flow flush 0
+    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 3 end / end
+
+   The rule is set successfully.
+   Send the ipv4-other/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport.
+   All the packets are distributed to queue 3.
+
+5. Set a wrong parameter: queue ID is 16 ::
+
+    testpmd> flow flush 0
+    testpmd> flow create 0 ingress pattern end actions rss queues 16 end / end
+
+   The rule failed to be created.
+
+6. Set all the queues to the rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 end / end
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   The packets may be distributed to any of the queue 0-15.
+
+Notes: The max queue number may be different in different NIC types.
+We can set different queue number in command line with different NIC types.
+
+Test case: Different packet types
+=================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Set queue 1, 8 and 15 into RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types udp ipv4-tcp ipv6-sctp ipv4-other end queues 1 8 15 end / end
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4-tcp ipv4-udp ipv6-udp ipv6-udp-ex udp tcp
+
+3. Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   ipv4-udp/ipv4-tcp/ipv6-udp are distributed to queue 1/8/15.
+   Other packets are distributed to queue 0.
+
+4. Set a different packet type RSS queue rule::
+
+    testpmd> flow flush 0
+    testpmd> flow create 0 ingress pattern end actions rss types ipv6 ipv4 end queues 3 8 end / end
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv6 ip
+
+5. Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   all the packets are distributed to queue 1/8/15.
+
+Notes: IXGBE only support udp/tcp ptype enabling alone,
+not support ipv4-other/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-sctp enabling alone.
+
+Test case: disable rss in command-line
+======================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 0x3 -n 4 -- -i --rxq=8 --txq=8 --disable-rss --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+
+3. enable all RSS function type::
+
+    testpmd> flow create 0 ingress pattern end actions rss types all end / end
+
+   Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to any of queue 0-7
+
+4. Clean the rule::
+
+    testpmd> flow flush 0
+
+   Send the all type packets to port 0.
+   All the packets are distributed to queue 0.
+
+5. Set the RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types ipv6-tcp ipv4-udp end queues 5 6 7 end / end
+
+   Send ipv4-udp/ipv6-tcp packets with different src/dst ip address.
+   All the packets are distributed to queue 5/6/7.
+   Send ipv4-other/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+
+Test case: Flow directory rule and RSS rule combination
+=======================================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Set a RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 6 7 8 end / end
+
+   Send pkt2 to port 0, pkt2 is distributed to queue 8.
+
+3. Set a flow directory rule::
+
+    testpmd> flow create 0 ingress pattern eth / ipv4 src is 10.0.0.1 dst is 192.168.0.2 / udp src is 50 dst is 50 / end actions queue index 1 / end
+
+   Send pkt2 to port 0, pkt2 is distributed to queue 1.
+
+4. Destroy the flow directory rule::
+
+    testpmd> flow destroy 0 rule 1
+
+   Send pkt2 to port 0, pkt2 is distributed to queue 8 again.
+   So flow directory filter is priority to RSS hash filter.
-- 
2.7.4


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [dts] [PATCH]test_plans: change rss command due to dpdk code change
  2020-06-09 13:03 [dts] [PATCH]test_plans: change rss command due to dpdk code change Peng Yuan
@ 2020-06-11 13:22 ` Tu, Lijuan
  0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-06-11 13:22 UTC (permalink / raw)
  To: Peng, Yuan, dts; +Cc: Peng, Yuan

Applied, thanks

-----Original Message-----
From: dts <dts-bounces@dpdk.org> On Behalf Of Peng Yuan
Sent: 2020^[$BG/^[(B6^[$B7n^[(B9^[$BF|^[(B 21:04
To: dts@dpdk.org
Cc: Peng, Yuan <yuan.peng@intel.com>
Subject: [dts] [PATCH]test_plans: change rss command due to dpdk code change

change rss command due to dpdk code change devide the i40e cases and ixgbe/igb cases

Signed-off-by: Peng Yuan <yuan.peng@intel.com>

diff --git a/test_plans/rss_to_rte_flow_test_plan.rst b/test_plans/rss_to_rte_flow_test_plan.rst
index d91484a..0e33f11 100644
--- a/test_plans/rss_to_rte_flow_test_plan.rst
+++ b/test_plans/rss_to_rte_flow_test_plan.rst
@@ -50,7 +50,7 @@ Prerequisites
 =============
 
 1. Hardware:
-   Fortville/82599/I350
+   I40E/IXGBE/IGB driver NIC
 
 2. Software:
    dpdk: http://dpdk.org/git/dpdk
@@ -66,13 +66,21 @@ Prerequisites
     pkt2 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.2")/UDP(dport=50, sport=50)/("X"*48)
     pkt3 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.3")/TCP(dport=50, sport=50)/("X"*48)
     pkt4 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.2")/("X"*48)
-    pkt5 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2",nh=132)/SCTP(dport=80, sport=80)/("X"*48)
-    pkt6 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/UDP(dport=50, sport=50)/("X"*48)
-    pkt7 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/TCP(dport=50, sport=50)/("X"*48)
-    pkt8 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/("X"*48)
-
-Test case: disable and enable rss
-=================================
+    pkt5 = Ether(dst="00:00:00:00:01:00")/IP(src="10.0.0.1",dst="192.168.0.2", frag=1)/Raw("X"*48)
+    pkt6 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2",nh=132)/SCTP(dport=80, sport=80)/("X"*48)
+    pkt7 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/UDP(dport=50, sport=50)/("X"*48)
+    pkt8 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/TCP(dport=50, sport=50)/("X"*48)
+    pkt9 = Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1",dst="2001::2")/("X"*48)
+    pkt10 = Ether(dst="00:00:00:00:01:00")/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020", nh=44)/("X"*48)
+    pkt11 = Ether(dst="00:00:00:00:01:00", 
+ type=0x0807)/Raw(load="\x61\x62\x63\x64")
+
+5. The rss setting commands are different between i40e driver and ixgbe/igb driver.
+   So design different cases on i40e/ixgbe/igb.
+
+I40E Cases
+==========
+Test case: set rss types on two ports (I40E) 
+============================================
 
 1. Start the testpmd::
 
@@ -87,73 +95,118 @@ Test case: disable and enable rss
     RSS functions:
      ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to all the four queues.
+    testpmd> show port 1 rss-hash
+    RSS functions:
+     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-3. disable all RSS fuctions::
+   Send the ipv4-other/ipv4-frag/ipv6-other/ipv6-frag packets with different src/dst ip address to two ports.
+   All the packets are distributed to all the four queues of two ports.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to two ports.
+   All the packets are distributed to queue 0 on two ports.
 
-    testpmd> flow create 0 ingress pattern end actions rss types none end / end
+3. Enable ipv4-udp RSS function on port 0::
+
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end 
+ actions rss types ipv4-udp end queues end / end
     Flow rule #0 created
+
     testpmd> show port 0 rss-hash
-    RSS disabled
+    RSS functions:
+     ipv4-udp udp
 
-   Send the ipv4-udp packets with different src/dst ip address.
-   All the packets are distributed to queue 0.
-   Notes: only i40e support the command,
-   others don't support the command created.
+    testpmd> show port 1 rss-hash
+    RSS functions:
+     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-4. enable RSS fuction with all RSS hash type::
 
-    testpmd> flow create 0 ingress pattern end actions rss types all end / end
-    Flow rule #1 created
-    testpmd> show port 0 rss-hash
+   Send the ipv4-other/ipv4-frag/ipv6-other/ipv6-frag packets with different src/dst ip address to two ports.
+   All the packets to port 0 are distributed to queue 0.
+   All the packets to port 1 are distributed to all the four queues
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to two ports.
+   All the packets to port 0 are distributed to all the four queues.
+   All the packets to port 1 are distributed to queue 0
+
+4. enable RSS fuction with all RSS hash type on port 1::
+
+    testpmd> flow create 1 ingress pattern eth / end actions rss types l2-payload end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / end actions rss types ipv4-other end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / end actions rss types ipv4-frag end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / sctp / end actions rss types ipv4-sctp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss types ipv6-other end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss types ipv6-frag end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / udp / end actions rss types ipv6-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / tcp / end actions rss types ipv6-tcp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / sctp / end 
+ actions rss types ipv6-sctp end queues end / end
+
+   all the rules can be created successfully.
+   then check the rule list::
+
+    testpmd> flow list 1
+
+   there are 11 rules listed correctly.
+   then show the port RSS function::
+
+    testpmd> show port 1 rss-hash
     RSS functions:
      all ipv4-frag ipv4-tcp ipv4-udp ipv4-sctp ipv4-other ipv6-frag ipv6-tcp ipv6-udp ipv6-sctp ipv6-other l2-payload ip udp tcp sctp
 
-   Send the ipv4-udp packets with different src/dst ip address.
-   All the packets are distributed to all the four queues.
+   Send the ipv4-other/ipv4-frag/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address or different sport/dport to port 1.
+   All the packets are distributed to all the four queues of port 1.
+   Send same packets to port 0.
+   ipv4-udp packets are distributed to all the queues of port 0.
+   other packets are distributed to queue 0.
 
-Notes: the default RSS functions are different among several NICs.
-Here shows the printing of NIC with i40e driver.
+5. enable RSS fuction with all RSS hash type on port 0, all the rules can be created successfully.
+   Send same packets to port 0.
+   All the packets are distributed to all the four queues of port 0.
+   Send same packets to port 1.
+   All the packets are distributed to all the four queues of port 1.
 
-Test case: enable ipv4-udp rss
-==============================
+6. delete rule 0/2/10 of port 1::
 
-1. Start the testpmd::
+    testpmd> flow destroy 1 rule 0
+    testpmd> flow destroy 1 rule 2
+    testpmd> flow destroy 1 rule 10
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
-    testpmd> set fwd rxonly
-    testpmd> set verbose 1
-    testpmd> start
+   list the rules on port 1, other rules can be listed.
+   Send same packets to port 0.
+   All the packets are distributed to all the four queues of port 0.
+   Send same packets to port 1.
+   L2-payload/ipv4-frag/ipv6-sctp are distributed to queue 0 of port 1.
+   Other packets are distributed to all the four queues of port 1.
 
-2. Show port default RSS fuctions::
+7. disable RSS fuction with all RSS hash type on port 0::
 
+    testpmd> flow flush 0
     testpmd> show port 0 rss-hash
-    RSS functions:
-     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
+    RSS disabled
 
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to all the four queues.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
+   Send same packets to port 0.
    All the packets are distributed to queue 0.
-   Notes: different NICs has different default RSS type function.
-   the result is for i40e.
+   Send same packets to port 1.
+   L2-payload/ipv4-frag/ipv6-sctp are distributed to queue 0 of port 1.
+   Other packets are distributed to all the four queues of port 1.
 
-3. Enable ipv4-udp, and set all the queues into RSS queue rule::
+8. disable RSS fuction with all RSS hash type on port 1::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end / end
-    Flow rule #0 created
-    testpmd> show port 0 rss-hash
-    RSS functions:
-     ipv4-udp udp
+    testpmd> flow flush 1
+    testpmd> show port 1 rss-hash
+    RSS disabled
 
-   Send the ipv4-other packets with different src/dst ip address.
+   Send same packets to port 0.
+   All the packets are distributed to queue 0.
+   Send same packets to port 1.
    All the packets are distributed to queue 0.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
-   All the packets are distributed to all the four queues.
 
-Test case: set valid and invalid queue
-======================================
+   Notes: only i40e support the command,
+   others don't support the command created.
+
+Notes: the default RSS functions are different among several NICs.
+Here shows the printing of NIC with i40e driver.
+
+Test case: set rss queues on two ports (I40E) 
+=============================================
 
 1. Start the testpmd::
 
@@ -162,77 +215,187 @@ Test case: set valid and invalid queue
     testpmd> set verbose 1
     testpmd> start
 
-2. Set queue 0, 8 and 15 into RSS queue rule::
+2. Set queue 0, 8 and 15 into RSS queue rule on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 0 8 15 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 0 8 15 end / end
 
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to queue 0/8/15.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
-   All the packets are distributed to queue 0.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to all queues of port 1.
 
-3. Set a second RSS queue rule::
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to port 0 and port 1.
+   All the packets are distributed to queue 0 of both ports.
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 3 end / end
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 3 end / end
+3. Set a RSS queue rule on port 1::
 
-   The two rules failed to be created.
-   There can't be more than one RSS queue rule.
+    testpmd> flow create 1 ingress pattern end actions rss types end 
+ queues 3 end / end
 
-4. Reset the RSS queue rule::
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 3 of port 1.
+
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to port 0 and port 1.
+   All the packets are distributed to queue 0 of both ports.
+
+4. Set a second RSS queue rule on port 1::
+
+    testpmd> flow create 1 ingress pattern end actions rss types end 
+ queues 0 8 15 end / end
+
+   The rule is set successfully. list the rules::
+
+    testpmd> flow list 1
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     => RSS
+    1       0       0       i--     => RSS
+
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 0/8/15 of port 1.
+
+Notes: rule 1 conflicts with rule 0, rule 1 will overlap the rule 0.
+
+5. delete rule 0 of port 0::
 
     testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 3 end / end
 
-   The rule is set successfully.
-   Send the ipv4-other packets with different src/dst ip address.
-   All the packets are distributed to queue 0.
-   Send the ipv4-udp packets with different src/dst ip and sport/dport.
-   All the packets are distributed to queue 0/8/15.
+   there is no rule listed on port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to all queues of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 0/8/15 of port 1.
 
-5. Set a wrong parameter: queue ID is 16 ::
+6. Set a RSS queue rule on port 0 again::
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 16 end / end
+     testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 0 8 15 end / end
 
-   The rule failed to be created.
+   delete rule 1 of port 1::
 
-6. Set all the queues to the rule::
+    testpmd> flow destroy 1 rule 1
+    testpmd> flow list 1
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     => RSS
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 end / end
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to all queues of port 1.
+
+7. Set a RSS queue rule on port 1 again::
+
+    testpmd> flow create 1 ingress pattern end actions rss types end 
+ queues 3 end / end
+
+   deleate rule 0 of port 1::
+
+    testpmd> flow destroy 1 rule 0
+    testpmd> flow list 1
+    ID      Group   Prio    Attr    Rule
+    1       0       0       i--     => RSS
+
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to queue 3 of port 1.
+
+8. Flush rules on port 1::
+
+    testpmd> flow flush 1
+
+   there is no rule listed on port 1.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to queue 0/8/15 of port 0.
+   Send the ipv4-other packets with different src/dst ip address to port 1.
+   All the packets are distributed to all queues of port 1.
+
+9. Set a wrong parameter: queue ID is 16 ::
+
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 16 end / end
+
+   Fail to create the rule, report message::
+
+    queue id > max number of queues: Invalid argument
+
+10. Set all the queues to the rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 end / end
 
    Send the ipv4-other packets with different src/dst ip address.
-   The packets may be distributed to any of the queue 0-15.
+   All the packets are distributed to all queues.
 
 Notes: The max queue number may be different in different NIC types.
 We can set different queue number in command line with different NIC types.
 
-Test case: Different packet types
-=================================
+Test case: set rss types and rss queues on two ports (I40E) 
+===========================================================
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=8 --txq=8 
+ --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
 
-2. Set queue 1, 8 and 15 into RSS queue rule::
+2. Show port default RSS fuctions on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss types udp ipv4-tcp ipv6-sctp ipv4-other end queues 1 8 15 end / end
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     ipv4-frag ipv4-other ipv6-frag ipv6-other ip
 
-3. Send the eight packets to port 0.
-   pkt2/pkt3/pkt4/pkt5/pkt6 are distributed to queue 1/8/15.
-   Other packets are distributed to queue 0.
+   Send the ipv4-other packets with different src/dst ip address to port 0.
+   All the packets are distributed to all the four queues.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport port 0.
+   All the packets are distributed to queue 0.
 
-4. Set a different packet type RSS queue rule::
+Notes: different NICs has different default RSS type function.
+the result is for i40e.
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv6-other end queues 3 end / end
+3. Enable ipv4-udp, and set queue 0 2 7 into RSS queue rule::
 
-   The rule failed to be created.
-   There can't be more than one RSS queue rule.
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    Flow rule #0 created
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 0 2 7 end / end
+    Flow rule #1 created
 
-Test case: disable rss in command-line
-======================================
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     ipv4-udp udp
+
+   Send the ipv4-other packets with different src/dst ip address to two ports.
+   All the packets to queue 0 are distributed to queue 0.
+   All the packets to queue 1 are distributed to all queue.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport to two ports.
+   All the packets to queue 0 are distributed to queue 0/2/7.
+   All the packets to queue 1 are distributed to queue 0.
+
+4. Enable ipv4-udp/ipv4-tcp/ipv6-other/ipv6-sctp/ipv6-udp RSS type, and set a RSS queue rule on port 1::
+
+     testpmd> flow create 1 ingress pattern end actions rss types end queues 1 4 7 end / end
+     testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss types ipv6-other end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv6 / sctp / end actions rss types ipv6-sctp end queues end / end
+     testpmd> flow create 1 ingress pattern eth / ipv6 / udp / end 
+ actions rss types ipv6-udp end queues end / end
+
+5. Send the eight packets to two ports.
+   ipv4-udp packet to port 0 is distributed to queue 0/2/7.
+   Other packets to port 0 are distributed to queue 0.
+   ipv4-udp/ipv4-tcp/ipv6-other/ipv6-sctp/ipv6-udp to port 1 are distributed to queue 1/4/7.
+   Other packets to port 1 are distributed to queue 0.
+
+6. Set a different RSS queue rule on port 1::
+
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 3 end / end
+
+   Send the eight packets to port 0.
+   get same result with step 5.
+   Send the eight packets to port 1.
+   ipv4-udp/ipv4-tcp/ipv6-other/ipv6-sctp/ipv6-udp to port 1 are distributed to queue 3.
+   Other packets are distributed to queue 0.
+
+Test case: disable rss in command-line (I40E) 
+=============================================
 
 1. Start the testpmd::
 
@@ -240,34 +403,66 @@ Test case: disable rss in command-line
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
+    testpmd> show port 0 rss-hash
+    RSS disabled
 
-2. Send the eight packets to port 0.
+2. Send the eight packets to port 0 and port 1
    All the packets are distributed to queue 0.
 
-3. enable all RSS function type::
+3. enable ipv4-udp and ipv6-tcp RSS function type on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss types all end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 0 ingress pattern eth / ipv6 / tcp / end 
+ actions rss types ipv6-tcp end queues end / end
 
    Send the eight packets to port 0.
-   All the packets are distributed to any of queue 0-7
+   ipv4-udp/ipv6-tcp packets are distributed to all queues.
+   Other packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   All packets are distributed to queue 0.
 
-   or set the RSS queue rule::
+4. set queue 1, 4, 7 into RSS queue rule on port 0::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv6-tcp ipv4-udp sctp ipv6-other end queues 5 6 7 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 1 4 7 end / end
 
    Send the eight packets to port 0.
-   pkt1/pkt2/pkt5/pkt7/pkt8 are distributed to queue 5/6/7.
+   ipv4-udp/ipv6-tcp packets are distributed to queue 1/4/7.
    Other packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   All packets are distributed to queue 0.
 
-4. Clean the rule::
+5. enable ipv4-udp and ipv6-other RSS function type on port 1::
+
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv6 / end actions rss 
+ types ipv6-other end queues end / end
+
+   Send the eight packets to port 0.
+   ipv4-udp/ipv6-tcp packets are distributed to queue 1/4/7.
+   Other packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   ipv4-udp/ipv6-other packets are distributed to queue 0-7.
+   Other packets are distributed to queue 0.
+
+6. Clean the rules of port 0::
 
     testpmd> flow flush 0
 
    Send the eight packets to port 0.
    All the packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   ipv4-udp/ipv6-other packets are distributed to queue 0-7.
+   Other packets are distributed to queue 0.
 
-Test case: set key and key_len
-==============================
+   Clean the rules of port 1::
+
+    testpmd> flow flush 1
+
+   Send the eight packets to port 0.
+   All the packets are distributed to queue 0.
+   Send the eight packets to port 1.
+   All the packets are distributed to queue 0.
+
+Test case: set key and key_len (I40E)
+=====================================
 
 Only i40e support key and key_len setting.
 
@@ -280,14 +475,20 @@ Only i40e support key and key_len setting.
 
 2. Set ipv4-udp RSS and show the default RSS key::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end 
+ actions rss types ipv4-udp end queues end / end
     testpmd> show port 0 rss-hash key
     RSS functions:
      ipv4-udp udp
     RSS key:
     74657374706D6427732064656661756C74205253532068617368206B65792C206F7665727269646520697420666F722062657474
+    testpmd> show port 1 rss-hash key
+    RSS functions:
+     ipv4-udp udp
+    RSS key:
+    
+ 74657374706D6427732064656661756C74205253532068617368206B65792C206F7665
+ 727269646520697420666F722062657474
 
-   Send the five packets to port 0::
+   Send the five packets to port 0 and port 1::
 
     pkt1 = Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0',dst='4.0.0.0')/UDP(sport=100,dport=200)/('X'*48)
     pkt2 = Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0',dst='4.0.0.0')/UDP(sport=100,dport=201)/('X'*48)
@@ -301,10 +502,9 @@ Only i40e support key and key_len setting.
    pkt4 is distributed to queue 1.
    pkt5 is distributed to queue 2.
 
-3. Set ipv4-udp key::
+3. Set ipv4-udp key on port 0::
 
-    testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end key \
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end 
+ actions rss types ipv4-udp end queues end key \
     1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678901234567890FFFFFFFFFFFF / end
     testpmd> show port 0 rss-hash key
     RSS functions:
@@ -318,11 +518,11 @@ Only i40e support key and key_len setting.
    pkt3 is distributed to queue 2.
    pkt4 is distributed to queue 0.
    pkt5 is distributed to queue 3.
+   Send the same five packets to port 1, they are distributed to same queues with step 2.
 
 4. Set ipv4-udp with truncating key_len::
 
-    testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end key \
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end 
+ actions rss types ipv4-udp end queues end key \
     1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678901234567890FFFFFFFFFFFF key_len 50 / end
     testpmd> show port 0 rss-hash key
     RSS functions:
@@ -336,6 +536,7 @@ Only i40e support key and key_len setting.
    pkt3 is distributed to queue 0.
    pkt4 is distributed to queue 1.
    pkt5 is distributed to queue 0.
+   Send the same five packets to port 1, they are distributed to same queues with step 2.
 
    The key length is 52 bytes, if setting it shorter than 52, the key value doesn't take effect.
    The showed key value is an invalid value, not the default value.
@@ -343,8 +544,7 @@ Only i40e support key and key_len setting.
 
 5. Set ipv4-udp with padding key_len::
 
-    testpmd> flow flush 0
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end key \
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end 
+ actions rss types ipv4-udp end queues end key \
     1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678901234567890FFFFFF key_len 52 / end
     testpmd> show port 0 rss-hash key
     RSS functions:
@@ -358,12 +558,31 @@ Only i40e support key and key_len setting.
    pkt3 is distributed to queue 2.
    pkt4 is distributed to queue 0.
    pkt5 is distributed to queue 3.
+   Send the same five packets to port 1, they are distributed to same queues with step 2.
 
    The lengh of key is 49 bytes, but the key_len is 52,
    so the last three bytes of key is padded by default value.
 
-Test case: Flow directory rule and RSS rule combination -=======================================================
+6. Set ipv4-udp key on port 1::
+
+    testpmd> flow create 1 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end key \
+    1234567890123456789012345678901234567890FFFFFFFFFFFF1234567890123456789012345678909876543210EEEEEEEEEEEE / end
+    testpmd> show port 1 rss-hash key
+    RSS functions:
+     ipv4-udp udp
+    RSS key:
+    
+ 1234567890123456789012345678901234567890FFFFFFFFFFFF123456789012345678
+ 9012345678909876543210EEEEEEEEEEEE
+
+   Send the same five packets to port 0, they are distributed to same queues with step 5.
+   Send the same five packets to port 1,
+   pkt1 is distributed to queue 3.
+   pkt2 is distributed to queue 2.
+   pkt3 is distributed to queue 2.
+   pkt4 is distributed to queue 0.
+   pkt5 is distributed to queue 3.
+
+Test case: Flow directory rule and RSS rule combination (I40E) 
+==============================================================
 
 1. Start the testpmd::
 
@@ -374,9 +593,10 @@ Test case: Flow directory rule and RSS rule combination
 
 2. Set a RSS queue rule::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 6 7 8 end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 6 7 8 end / end
 
-   Send pkt2 to port 0, pkt2 is distributed to queue 8.
+   Send ipv4-udp packet to port 0, distributed to queue 8.
 
 3. Set a flow directory rule::
 
@@ -386,13 +606,13 @@ Test case: Flow directory rule and RSS rule combination
 
 4. Destroy the flow directory rule::
 
-    testpmd> flow destroy 0 rule 1
+    testpmd> flow destroy 0 rule 2
 
    Send pkt2 to port 0, pkt2 is distributed to queue 8 again.
    So flow directory filter is priority to RSS hash filter.
 
-Test case: Set queue-region generic flow api -==============================================
+Test case: Set queue-region with rte_flow api (I40E) 
+===================================================
  
 1. Start the testpmd::
 
@@ -403,7 +623,8 @@ Test case: Set queue-region generic flow api
 
 2. Set a RSS queue rule::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-tcp end queues 7 8 10 11 12 14 15 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end queues 7 8 10 11 12 14 15 end / end
+    testpmd> flow create 0 ingress pattern eth / ipv4 / tcp / end 
+ actions rss types ipv4-tcp end queues end / end
 
 3. Send pkt to port 0::
 
@@ -430,23 +651,25 @@ Test case: Set queue-region generic flow api
     testpmd> flow list 0
     ID      Group   Prio    Attr    Rule
     0       0       0       i-      => RSS
-    1       0       0       i-      VLAN => RSS
+    1       0       0       i-      ETH IPV4 TCP => RSS
     2       0       0       i-      VLAN => RSS
     3       0       0       i-      VLAN => RSS
+    4       0       0       i-      VLAN => RSS
 
-    testpmd> flow destroy 0 rule 2
-    Flow rule #2 destroyed
+    testpmd> flow destroy 0 rule 3
+    Flow rule #3 destroyed
     testpmd> flow list 0
     ID      Group   Prio    Attr    Rule
     0       0       0       i-      => RSS
-    1       0       0       i-      VLAN => RSS
-    3       0       0       i-      VLAN => RSS
+    1       0       0       i-      ETH IPV4 TCP => RSS
+    2       0       0       i-      VLAN => RSS
+    4       0       0       i-      VLAN => RSS
 
-   Send the 3 packets to port 0. They are all distributed to queue 0.
+   Send the 3 packets to port 0. They are all distributed to queue 8.
    Queue region only can be deleted all or none.
 
-Test case: Set queue region with invalid parameter -==================================================
+Test case: Set queue region in rte_flow with invalid parameter (I40E) 
+=====================================================================
 
 1. Start the testpmd::
 
@@ -455,30 +678,40 @@ Test case: Set queue region with invalid parameter
     testpmd> set verbose 1
     testpmd> start
 
-2. Set a RSS queue rule::
+2. Set a queue region::
+
+    testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 10 11 end / end
+    port_flow_complain(): Caught PMD error type 16 (specific action): 
+ cause: 0x7ffeb4a60fd8, no valid queues: Invalid argument
+
+3. Set a RSS queue rule first::
 
-    testpmd> flow create 0 ingress pattern end actions rss queues 8 10 11 12 15 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 8 10 11 12 15 end / end
 
-3. Set invalid queue ID "9" to queue region::
+4. Set invalid queue ID "9" to queue region::
 
     testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 8 9 end / end
     Caught error type 11 (specific action): cause: 0x7ffda008efe8, no valid queues
 
    Queue of queue region must be included in rss function appointed queue.
 
-4. Set discontinuous queue ID to queue region::
+5. Set discontinuous queue ID to queue region::
 
     testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 8 10 end / end
     Caught error type 11 (specific action): cause: 0x7ffda008efe8, no valid queues
 
-5. Set invalid queue number to queue region::
+6. Set invalid queue number to queue region::
 
     testpmd> flow create 0 ingress pattern vlan tci is 0x4000 / end actions rss queues 10 11 12 end / end
     i40e_flow_parse_rss_action(): The region sizes should be any of the following values: 1, 2, 4, 8, 16, 32, 64 as long as the total number of queues do not exceed the VSI allocation
     Caught error type 2 (flow rule (handle)): Failed to create flow.
 
-Test case: Queue region and RSS rule combination -=========================================================
+7. Set a queue region::
+
+    testpmd> flow create 0 ingress pattern vlan tci is 0x2000 / end actions rss queues 10 11 end / end
+    Flow rule #1 created
+
+Test case: Queue region and RSS rule combination (I40E) 
+=======================================================
 
 Notes: Queue region is only supported by fortville, so this case only can  be implemented with fortville.
@@ -486,7 +719,7 @@ be implemented with fortville.
 1. Start the testpmd::
 
     ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
-    testpmd> port config all rss all
+    testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end 
+ actions rss types ipv4-udp end queues end / end
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -497,17 +730,246 @@ be implemented with fortville.
     testpmd> set port 0 queue-region region_id 0 flowtype 31
     testpmd> set port 0 queue-region flush on
 
-   Send pkt2 to port 0. It is distributed to queue 1.
+   Send ipv4-udp packet to port 0. It is distributed to queue 1.
 
 3. Set a RSS queue rule::
 
-    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end queues 6 7 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types end 
+ queues 6 7 end / end
 
-   Send pkt2 to port 0. It is still distributed to queue 1.
+   Send ipv4-udp packet to port 0. It is still distributed to queue 1.
 
 4. flush the queue region::
 
     testpmd> set port 0 queue-region flush off 
 
-   Send pkt2 to port 0. It is distributed to queue 7.
+   Send ipv4-udp packet to port 0. It is distributed to queue 7.
    Queue region is priority to RSS queue rule.
+
+
+IXGBE/IGB cases
+===============
+IXGBE/IGB doesn't support L2-payload ptype.
+
+Test case: disable and enable rss
+=================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Show port default RSS fuctions::
+
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv6 ipv6-ex ip
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to all the four queues.
+
+3. disable all RSS fuctions::
+
+    testpmd> flow create 0 ingress pattern end actions rss types none end / end
+    Flow rule #0 created
+    testpmd> show port 0 rss-hash
+    RSS disabled
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+
+4. enable RSS fuction with all RSS hash type::
+
+    testpmd> flow create 0 ingress pattern end actions rss types all end / end
+    Flow rule #1 created
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp ipv6-ex 
+ ipv6-tcp-ex ipv6-udp-ex ip udp tcp
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to all the four queues.
+
+Notes: the default RSS functions may be different among several NICs.
+
+Test case: enable ipv4-udp rss
+==============================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Show port default RSS fuctions::
+
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv6 ipv6-ex ip
+
+3. Enable ipv4-udp, and set all the queues into RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types ipv4-udp end / end
+    Flow rule #0 created
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4-udp udp
+
+   Send the ipv4-other/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport.
+   All the packets are distributed to all the four queues.
+
+Test case: set rss valid/invalid queue rule 
+===========================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Set queue 0, 8 and 15 into RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss queues 0 8 
+ 15 end / end
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0/8/15.
+
+3. Set a second RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss queues 3 end / end
+    testpmd> flow create 0 ingress pattern end actions rss types 
+ ipv4-udp end queues 3 end / end
+
+   The two rules failed to be created.
+   There can't be more than one RSS queue rule.
+
+4. Reset the RSS queue rule::
+
+    testpmd> flow flush 0
+    testpmd> flow create 0 ingress pattern end actions rss types 
+ ipv4-udp end queues 3 end / end
+
+   The rule is set successfully.
+   Send the ipv4-other/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+   Send the ipv4-udp packets with different src/dst ip and sport/dport.
+   All the packets are distributed to queue 3.
+
+5. Set a wrong parameter: queue ID is 16 ::
+
+    testpmd> flow flush 0
+    testpmd> flow create 0 ingress pattern end actions rss queues 16 
+ end / end
+
+   The rule failed to be created.
+
+6. Set all the queues to the rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss queues 0 1 2 
+ 3 4 5 6 7 8 9 10 11 12 13 14 15 end / end
+
+   Send the ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   The packets may be distributed to any of the queue 0-15.
+
+Notes: The max queue number may be different in different NIC types.
+We can set different queue number in command line with different NIC types.
+
+Test case: Different packet types
+=================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Set queue 1, 8 and 15 into RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types udp ipv4-tcp ipv6-sctp ipv4-other end queues 1 8 15 end / end
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4-tcp ipv4-udp ipv6-udp ipv6-udp-ex udp tcp
+
+3. Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   ipv4-udp/ipv4-tcp/ipv6-udp are distributed to queue 1/8/15.
+   Other packets are distributed to queue 0.
+
+4. Set a different packet type RSS queue rule::
+
+    testpmd> flow flush 0
+    testpmd> flow create 0 ingress pattern end actions rss types ipv6 ipv4 end queues 3 8 end / end
+    testpmd> show port 0 rss-hash
+    RSS functions:
+     all ipv4 ipv6 ip
+
+5. Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   all the packets are distributed to queue 1/8/15.
+
+Notes: IXGBE only support udp/tcp ptype enabling alone, not support 
+ipv4-other/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-sctp enabling alone.
+
+Test case: disable rss in command-line
+======================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 0x3 -n 4 -- -i --rxq=8 --txq=8 --disable-rss --port-topology=chained
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+
+3. enable all RSS function type::
+
+    testpmd> flow create 0 ingress pattern end actions rss types all 
+ end / end
+
+   Send ipv4-other/ipv4-udp/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-tcp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to any of queue 0-7
+
+4. Clean the rule::
+
+    testpmd> flow flush 0
+
+   Send the all type packets to port 0.
+   All the packets are distributed to queue 0.
+
+5. Set the RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types 
+ ipv6-tcp ipv4-udp end queues 5 6 7 end / end
+
+   Send ipv4-udp/ipv6-tcp packets with different src/dst ip address.
+   All the packets are distributed to queue 5/6/7.
+   Send ipv4-other/ipv4-tcp/ipv4-sctp/ipv4-frag/ipv6-other/ipv6-frag/ipv6-udp/ipv6-sctp packets with different src/dst ip address.
+   All the packets are distributed to queue 0.
+
+Test case: Flow directory rule and RSS rule combination 
+=======================================================
+
+1. Start the testpmd::
+
+    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+
+2. Set a RSS queue rule::
+
+    testpmd> flow create 0 ingress pattern end actions rss types 
+ ipv4-udp end queues 6 7 8 end / end
+
+   Send pkt2 to port 0, pkt2 is distributed to queue 8.
+
+3. Set a flow directory rule::
+
+    testpmd> flow create 0 ingress pattern eth / ipv4 src is 10.0.0.1 
+ dst is 192.168.0.2 / udp src is 50 dst is 50 / end actions queue index 
+ 1 / end
+
+   Send pkt2 to port 0, pkt2 is distributed to queue 1.
+
+4. Destroy the flow directory rule::
+
+    testpmd> flow destroy 0 rule 1
+
+   Send pkt2 to port 0, pkt2 is distributed to queue 8 again.
+   So flow directory filter is priority to RSS hash filter.
--
2.7.4


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-09 13:03 [dts] [PATCH]test_plans: change rss command due to dpdk code change Peng Yuan
2020-06-11 13:22 ` Tu, Lijuan

test suite reviews and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \
		dts@dpdk.org
	public-inbox-index dts


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dts


AGPL code for this site: git clone https://public-inbox.org/ public-inbox