patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH v3 1/6] app/testpmd: fix missing verification of port id
       [not found] <1600501034-50042-1-git-send-email-humin29@huawei.com>
@ 2020-09-19  7:37 ` Min Hu (Connor)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 2/6] app/testpmd: fix VLAN offload configuration when config fail Min Hu (Connor)
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Min Hu (Connor) @ 2020-09-19  7:37 UTC (permalink / raw)
  To: xavier.huwei; +Cc: forest.zhouchang, Chengchang Tang, stable, Wei Hu

From: Chengchang Tang <tangchengchang@huawei.com>

To set Tx vlan offloads, it is required to stop port firstly. But before
checking whether the port is stopped, the port id entered by the user
is not checked for validity. When the port id is illegal, it would lead
to a segmentation fault since it attempts to access a member of
non-existent port.

This patch adds verification of port id in tx vlan offloads and remove
duplicated check.

Fixes: 597f9fafe13b ("app/testpmd: convert to new Tx offloads API")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
v1 -> v2: remove the duplicated check.
---
 app/test-pmd/cmdline.c | 9 +++++++++
 app/test-pmd/config.c  | 6 ------
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 5f93409..43b7c2f 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -4291,6 +4291,9 @@ cmd_tx_vlan_set_parsed(void *parsed_result,
 {
 	struct cmd_tx_vlan_set_result *res = parsed_result;
 
+	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+		return;
+
 	if (!port_is_stopped(res->port_id)) {
 		printf("Please stop port %d first\n", res->port_id);
 		return;
@@ -4345,6 +4348,9 @@ cmd_tx_vlan_set_qinq_parsed(void *parsed_result,
 {
 	struct cmd_tx_vlan_set_qinq_result *res = parsed_result;
 
+	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+		return;
+
 	if (!port_is_stopped(res->port_id)) {
 		printf("Please stop port %d first\n", res->port_id);
 		return;
@@ -4458,6 +4464,9 @@ cmd_tx_vlan_reset_parsed(void *parsed_result,
 {
 	struct cmd_tx_vlan_reset_result *res = parsed_result;
 
+	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+		return;
+
 	if (!port_is_stopped(res->port_id)) {
 		printf("Please stop port %d first\n", res->port_id);
 		return;
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index b6eb2a5..2bdec25 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -3545,8 +3545,6 @@ tx_vlan_set(portid_t port_id, uint16_t vlan_id)
 	struct rte_eth_dev_info dev_info;
 	int ret;
 
-	if (port_id_is_invalid(port_id, ENABLED_WARN))
-		return;
 	if (vlan_id_is_invalid(vlan_id))
 		return;
 
@@ -3577,8 +3575,6 @@ tx_qinq_set(portid_t port_id, uint16_t vlan_id, uint16_t vlan_id_outer)
 	struct rte_eth_dev_info dev_info;
 	int ret;
 
-	if (port_id_is_invalid(port_id, ENABLED_WARN))
-		return;
 	if (vlan_id_is_invalid(vlan_id))
 		return;
 	if (vlan_id_is_invalid(vlan_id_outer))
@@ -3604,8 +3600,6 @@ tx_qinq_set(portid_t port_id, uint16_t vlan_id, uint16_t vlan_id_outer)
 void
 tx_vlan_reset(portid_t port_id)
 {
-	if (port_id_is_invalid(port_id, ENABLED_WARN))
-		return;
 	ports[port_id].dev_conf.txmode.offloads &=
 				~(DEV_TX_OFFLOAD_VLAN_INSERT |
 				  DEV_TX_OFFLOAD_QINQ_INSERT);
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-stable] [PATCH v3 2/6] app/testpmd: fix VLAN offload configuration when config fail
       [not found] <1600501034-50042-1-git-send-email-humin29@huawei.com>
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 1/6] app/testpmd: fix missing verification of port id Min Hu (Connor)
@ 2020-09-19  7:37 ` Min Hu (Connor)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 3/6] app/testpmd: remove restriction on txpkts set Min Hu (Connor)
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Min Hu (Connor) @ 2020-09-19  7:37 UTC (permalink / raw)
  To: xavier.huwei; +Cc: forest.zhouchang, Chengchang Tang, stable, Wei Hu

From: Chengchang Tang <tangchengchang@huawei.com>

When failing to configure VLAN offloads after the port was started, there
is no need to update the port configuration. Currently, when user
configure an unsupported VLAN offloads and fails, and then restart the
port, it will fails since the configuration has been refreshed.

This patch makes the function return directly insead of refreshing the
configuration when execution fails.

Fixes: 384161e00627 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
 app/test-pmd/config.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 2bdec25..4e33208 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -3390,9 +3390,11 @@ vlan_extend_set(portid_t port_id, int on)
 	}
 
 	diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
-	if (diag < 0)
+	if (diag < 0) {
 		printf("rx_vlan_extend_set(port_pi=%d, on=%d) failed "
 	       "diag=%d\n", port_id, on, diag);
+		return;
+	}
 	ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
 }
 
@@ -3417,9 +3419,11 @@ rx_vlan_strip_set(portid_t port_id, int on)
 	}
 
 	diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
-	if (diag < 0)
+	if (diag < 0) {
 		printf("rx_vlan_strip_set(port_pi=%d, on=%d) failed "
 	       "diag=%d\n", port_id, on, diag);
+		return;
+	}
 	ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
 }
 
@@ -3458,9 +3462,11 @@ rx_vlan_filter_set(portid_t port_id, int on)
 	}
 
 	diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
-	if (diag < 0)
+	if (diag < 0) {
 		printf("rx_vlan_filter_set(port_pi=%d, on=%d) failed "
 	       "diag=%d\n", port_id, on, diag);
+		return;
+	}
 	ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
 }
 
@@ -3485,9 +3491,11 @@ rx_vlan_qinq_strip_set(portid_t port_id, int on)
 	}
 
 	diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
-	if (diag < 0)
+	if (diag < 0) {
 		printf("%s(port_pi=%d, on=%d) failed "
 	       "diag=%d\n", __func__, port_id, on, diag);
+		return;
+	}
 	ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
 }
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-stable] [PATCH v3 3/6] app/testpmd: remove restriction on txpkts set
       [not found] <1600501034-50042-1-git-send-email-humin29@huawei.com>
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 1/6] app/testpmd: fix missing verification of port id Min Hu (Connor)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 2/6] app/testpmd: fix VLAN offload configuration when config fail Min Hu (Connor)
@ 2020-09-19  7:37 ` Min Hu (Connor)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 4/6] app/testpmd: fix packet header in txonly mode Min Hu (Connor)
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Min Hu (Connor) @ 2020-09-19  7:37 UTC (permalink / raw)
  To: xavier.huwei; +Cc: forest.zhouchang, Chengchang Tang, stable, Wei Hu

From: Chengchang Tang <tangchengchang@huawei.com>

Currently, if nb_txd is not set, the txpkts is not allowed to be set
because the nb_txd is used to avoid the numer of segments exceed the Tx
ring size and the default value of nb_txd is 0. And there is a bug that
nb_txd is the global configuration for Tx ring size and the ring size
could be changed by some command per queue. So these valid check is
unreliable and introduced unnecessary constraints.

This patch adds a valid check function to use the real Tx ring size to
check the validity of txpkts.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
 app/test-pmd/config.c | 42 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 4e33208..882de2d 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2984,17 +2984,51 @@ show_tx_pkt_segments(void)
 	printf("Split packet: %s\n", split);
 }
 
+static bool
+nb_segs_is_invalid(unsigned int nb_segs)
+{
+	uint16_t port_id;
+
+	RTE_ETH_FOREACH_DEV(port_id) {
+		struct rte_port *port = &ports[port_id];
+		uint16_t ring_size;
+		uint16_t queue_id;
+
+		/*
+		 * When configure the txq by rte_eth_tx_queue_setup with
+		 * nb_tx_desc being 0, it will use a default value provided by
+		 * PMDs to setup this txq. If the default value is 0, it will
+		 * use the RTE_ETH_DEV_FALLBACK_TX_RINGSIZE to setup this txq.
+		 */
+		for (queue_id = 0; queue_id < nb_txq; queue_id++) {
+			if (port->nb_tx_desc[queue_id])
+				ring_size = port->nb_tx_desc[queue_id];
+			else if (port->dev_info.default_txportconf.ring_size)
+				ring_size =
+				    port->dev_info.default_txportconf.ring_size;
+			else
+				ring_size = RTE_ETH_DEV_FALLBACK_TX_RINGSIZE;
+
+			if (ring_size < nb_segs) {
+				printf("nb segments per TX packets=%u >= TX "
+				       "queue(%u) ring_size=%u - ignored\n",
+					nb_segs, queue_id, ring_size);
+				return true;
+			}
+		}
+	}
+
+	return false;
+}
+
 void
 set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs)
 {
 	uint16_t tx_pkt_len;
 	unsigned i;
 
-	if (nb_segs >= (unsigned) nb_txd) {
-		printf("nb segments per TX packets=%u >= nb_txd=%u - ignored\n",
-		       nb_segs, (unsigned int) nb_txd);
+	if (nb_segs_is_invalid(nb_segs))
 		return;
-	}
 
 	/*
 	 * Check that each segment length is greater or equal than
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-stable] [PATCH v3 4/6] app/testpmd: fix packet header in txonly mode
       [not found] <1600501034-50042-1-git-send-email-humin29@huawei.com>
                   ` (2 preceding siblings ...)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 3/6] app/testpmd: remove restriction on txpkts set Min Hu (Connor)
@ 2020-09-19  7:37 ` Min Hu (Connor)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 5/6] app/testpmd: fix valid desc id check Min Hu (Connor)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 6/6] app/testpmd: fix displaying Rx Tx queues information Min Hu (Connor)
  5 siblings, 0 replies; 6+ messages in thread
From: Min Hu (Connor) @ 2020-09-19  7:37 UTC (permalink / raw)
  To: xavier.huwei; +Cc: forest.zhouchang, Chengchang Tang, stable, Wei Hu

From: Chengchang Tang <tangchengchang@huawei.com>

In txonly forward mode, the packet header is fixed by the initial
setting, including the packet length and checksum. So when the packets
varies, this may cause a packet header error. Currently, there are two
methods in txonly mode to randomly change the packets.
1. Set txsplit random and txpkts (x[,y]*), the number of segments
   each packets will be a random value between 1 and total number of
   segments determined by txpkts settings.
   The step as follows:
     a) ./testpmd -w xxx -l xx -n 4 -- -i --disable-device-start
     b) port config 0 tx_offload multi_segs on
     c) set fwd txonly
     d) set txsplit rand
     e) set txpkts 2048,2048,2048,2048
     f) start
The nb_segs of the packets sent by testpmd will be 1~4. The real packet
length will be 2048, 4096, 6144 and 8192. But in fact the packet length
in ip header and udp header will be fixed by 8178 and 8158.

2. Set txonly-multi-flow. the ip address will be varied to generate
   multiple flow.
   The step as follows:
     a) ./testpmd -w xxx -l xx -n 4 -- -i --txonly-multi-flow
     b) set fwd txonly
     c) start
The ip address of each pkts will change randomly, but since the header
is fixed, the checksum may be a error value.

Therefore, this patch adds a function to update the packet length and
check sum in the pkts header when the txsplit mode is set to rand or
multi-flow is set.

Fixes: 82010ef55e7c ("app/testpmd: make txonly mode generate multiple flows")
Fixes: 79bec05b32b7 ("app/testpmd: add ability to split outgoing packets")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
 app/test-pmd/txonly.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c
index 45def72..d55ee7c 100644
--- a/app/test-pmd/txonly.c
+++ b/app/test-pmd/txonly.c
@@ -156,6 +156,34 @@ setup_pkt_udp_ip_headers(struct rte_ipv4_hdr *ip_hdr,
 	ip_hdr->hdr_checksum = (uint16_t) ip_cksum;
 }
 
+static inline void
+update_pkt_header(struct rte_mbuf *pkt, uint32_t total_pkt_len)
+{
+	struct rte_ipv4_hdr *ip_hdr;
+	struct rte_udp_hdr *udp_hdr;
+	uint16_t pkt_data_len;
+	uint16_t pkt_len;
+
+	pkt_data_len = (uint16_t) (total_pkt_len - (
+					sizeof(struct rte_ether_hdr) +
+					sizeof(struct rte_ipv4_hdr) +
+					sizeof(struct rte_udp_hdr)));
+	/* updata udp pkt length */
+	udp_hdr = rte_pktmbuf_mtod_offset(pkt, struct rte_udp_hdr *,
+				sizeof(struct rte_ether_hdr) +
+				sizeof(struct rte_ipv4_hdr));
+	pkt_len = (uint16_t) (pkt_data_len + sizeof(struct rte_udp_hdr));
+	udp_hdr->dgram_len = RTE_CPU_TO_BE_16(pkt_len);
+
+	/* updata ip pkt length and csum */
+	ip_hdr = rte_pktmbuf_mtod_offset(pkt, struct rte_ipv4_hdr *,
+				sizeof(struct rte_ether_hdr));
+	ip_hdr->hdr_checksum = 0;
+	pkt_len = (uint16_t) (pkt_len + sizeof(struct rte_ipv4_hdr));
+	ip_hdr->total_length = RTE_CPU_TO_BE_16(pkt_len);
+	ip_hdr->hdr_checksum = rte_ipv4_cksum(ip_hdr);
+}
+
 static inline bool
 pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp,
 		struct rte_ether_hdr *eth_hdr, const uint16_t vlan_tci,
@@ -223,6 +251,10 @@ pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp,
 	copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt,
 			sizeof(struct rte_ether_hdr) +
 			sizeof(struct rte_ipv4_hdr));
+
+	if (unlikely(tx_pkt_split == TX_PKT_SPLIT_RND) || txonly_multi_flow)
+		update_pkt_header(pkt, pkt_len);
+
 	if (unlikely(timestamp_enable)) {
 		uint64_t skew = RTE_PER_LCORE(timestamp_qskew);
 		struct {
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-stable] [PATCH v3 5/6] app/testpmd: fix valid desc id check
       [not found] <1600501034-50042-1-git-send-email-humin29@huawei.com>
                   ` (3 preceding siblings ...)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 4/6] app/testpmd: fix packet header in txonly mode Min Hu (Connor)
@ 2020-09-19  7:37 ` Min Hu (Connor)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 6/6] app/testpmd: fix displaying Rx Tx queues information Min Hu (Connor)
  5 siblings, 0 replies; 6+ messages in thread
From: Min Hu (Connor) @ 2020-09-19  7:37 UTC (permalink / raw)
  To: xavier.huwei; +Cc: forest.zhouchang, Chengchang Tang, stable, Wei Hu

From: Chengchang Tang <tangchengchang@huawei.com>

The number of desc is a per queue configuration. But in the check function,
nb_txd & nb_rxd are used to check whether the desc_id is valid. nb_txd &
nb_rxd are the global configuration of number of desc. If the queue
configuration is changed by cmdline liks: "port config xx txq xx ring_size
xxx", the real value will be changed.

This patch use the real value to check whether the desc_id is valid. And if
these are not configured by user. It will use the default value to check
it, since the rte_eth_rx_queue_setup & rte_eth_tx_queue_setup will use a
default value to confiure the queue if nb_rx_desc or nb_tx_desc is zero.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
 app/test-pmd/config.c | 53 +++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 43 insertions(+), 10 deletions(-)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 882de2d..b7851c7 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1891,22 +1891,55 @@ tx_queue_id_is_invalid(queueid_t txq_id)
 }
 
 static int
-rx_desc_id_is_invalid(uint16_t rxdesc_id)
+rx_desc_id_is_invalid(portid_t port_id, queueid_t rxq_id, uint16_t rxdesc_id)
 {
-	if (rxdesc_id < nb_rxd)
+	struct rte_port *port = &ports[port_id];
+	uint16_t ring_size;
+
+	/*
+	 * When configure the rxq by rte_eth_rx_queue_setup with nb_rx_desc
+	 * being 0, it will use a default value provided by PMDs to setup this
+	 * rxq. If the default value is 0, it will use the
+	 * RTE_ETH_DEV_FALLBACK_RX_RINGSIZE to setup this rxq.
+	 */
+	if (port->nb_rx_desc[rxq_id])
+		ring_size = port->nb_rx_desc[rxq_id];
+	else if (port->dev_info.default_rxportconf.ring_size)
+		ring_size = port->dev_info.default_rxportconf.ring_size;
+	else
+		ring_size =  RTE_ETH_DEV_FALLBACK_RX_RINGSIZE;
+
+	if (rxdesc_id < ring_size)
 		return 0;
-	printf("Invalid RX descriptor %d (must be < nb_rxd=%d)\n",
-	       rxdesc_id, nb_rxd);
+	printf("Invalid RX descriptor %d (must be < ring_size=%d)\n",
+	       rxdesc_id, ring_size);
 	return 1;
 }
 
 static int
-tx_desc_id_is_invalid(uint16_t txdesc_id)
+tx_desc_id_is_invalid(portid_t port_id, queueid_t txq_id, uint16_t txdesc_id)
 {
-	if (txdesc_id < nb_txd)
+	struct rte_port *port = &ports[port_id];
+	uint16_t ring_size;
+
+	/*
+	 * When configure the txq by rte_eth_tx_queue_setup with nb_tx_desc
+	 * being 0, it will use a default value provided by PMDs to setup this
+	 * txq. If the default value is 0, it will use the
+	 * RTE_ETH_DEV_FALLBACK_TX_RINGSIZE to setup this txq.
+	 */
+	if (port->nb_tx_desc[txq_id])
+		ring_size = port->nb_tx_desc[txq_id];
+	else if (port->dev_info.default_txportconf.ring_size)
+		ring_size = port->dev_info.default_txportconf.ring_size;
+	else
+		ring_size =  RTE_ETH_DEV_FALLBACK_RX_RINGSIZE;
+
+	if (txdesc_id < ring_size)
 		return 0;
-	printf("Invalid TX descriptor %d (must be < nb_txd=%d)\n",
-	       txdesc_id, nb_txd);
+
+	printf("Invalid TX descriptor %d (must be < ring_size=%d)\n",
+	       txdesc_id, ring_size);
 	return 1;
 }
 
@@ -2031,7 +2064,7 @@ rx_ring_desc_display(portid_t port_id, queueid_t rxq_id, uint16_t rxd_id)
 		return;
 	if (rx_queue_id_is_invalid(rxq_id))
 		return;
-	if (rx_desc_id_is_invalid(rxd_id))
+	if (rx_desc_id_is_invalid(port_id, rxq_id, rxd_id))
 		return;
 	rx_mz = ring_dma_zone_lookup("rx_ring", port_id, rxq_id);
 	if (rx_mz == NULL)
@@ -2048,7 +2081,7 @@ tx_ring_desc_display(portid_t port_id, queueid_t txq_id, uint16_t txd_id)
 		return;
 	if (tx_queue_id_is_invalid(txq_id))
 		return;
-	if (tx_desc_id_is_invalid(txd_id))
+	if (tx_desc_id_is_invalid(port_id, txq_id, txd_id))
 		return;
 	tx_mz = ring_dma_zone_lookup("tx_ring", port_id, txq_id);
 	if (tx_mz == NULL)
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-stable] [PATCH v3 6/6] app/testpmd: fix displaying Rx Tx queues information
       [not found] <1600501034-50042-1-git-send-email-humin29@huawei.com>
                   ` (4 preceding siblings ...)
  2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 5/6] app/testpmd: fix valid desc id check Min Hu (Connor)
@ 2020-09-19  7:37 ` Min Hu (Connor)
  5 siblings, 0 replies; 6+ messages in thread
From: Min Hu (Connor) @ 2020-09-19  7:37 UTC (permalink / raw)
  To: xavier.huwei; +Cc: forest.zhouchang, Huisong Li, stable, Wei Hu

From: Huisong Li <lihuisong@huawei.com>

Currently, the information of Rx/Tx queues from PMD driver is not displayed
exactly in the rxtx_config_display function. Because "ports[pid].rx_conf"
and "ports[pid].tx_conf" maintained in testpmd application may be not the
value actually used by PMD driver. For instance, user does not set a field,
but PMD driver has to use the default value.

This patch fixes rxtx_config_display so that the information of Rx/Tx
queues can be really displayed for the PMD driver that implement
.rxq_info_get and .txq_info_get ops callback function.

Fixes: 75c530c1bd5351 ("app/testpmd: fix port configuration print")
Fixes: d44f8a485f5d1f ("app/testpmd: enable per queue configure")
Cc: stable@dpdk.org

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
 app/test-pmd/config.c | 64 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 47 insertions(+), 17 deletions(-)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index b7851c7..03cd671 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2122,10 +2122,17 @@ rxtx_config_display(void)
 		struct rte_eth_txconf *tx_conf = &ports[pid].tx_conf[0];
 		uint16_t *nb_rx_desc = &ports[pid].nb_rx_desc[0];
 		uint16_t *nb_tx_desc = &ports[pid].nb_tx_desc[0];
-		uint16_t nb_rx_desc_tmp;
-		uint16_t nb_tx_desc_tmp;
 		struct rte_eth_rxq_info rx_qinfo;
 		struct rte_eth_txq_info tx_qinfo;
+		uint16_t rx_free_thresh_tmp;
+		uint16_t tx_free_thresh_tmp;
+		uint16_t tx_rs_thresh_tmp;
+		uint16_t nb_rx_desc_tmp;
+		uint16_t nb_tx_desc_tmp;
+		uint64_t offloads_tmp;
+		uint8_t pthresh_tmp;
+		uint8_t hthresh_tmp;
+		uint8_t wthresh_tmp;
 		int32_t rc;
 
 		/* per port config */
@@ -2139,41 +2146,64 @@ rxtx_config_display(void)
 		/* per rx queue config only for first queue to be less verbose */
 		for (qid = 0; qid < 1; qid++) {
 			rc = rte_eth_rx_queue_info_get(pid, qid, &rx_qinfo);
-			if (rc)
+			if (rc) {
 				nb_rx_desc_tmp = nb_rx_desc[qid];
-			else
+				rx_free_thresh_tmp =
+					rx_conf[qid].rx_free_thresh;
+				pthresh_tmp = rx_conf[qid].rx_thresh.pthresh;
+				hthresh_tmp = rx_conf[qid].rx_thresh.hthresh;
+				wthresh_tmp = rx_conf[qid].rx_thresh.wthresh;
+				offloads_tmp = rx_conf[qid].offloads;
+			} else {
 				nb_rx_desc_tmp = rx_qinfo.nb_desc;
+				rx_free_thresh_tmp =
+						rx_qinfo.conf.rx_free_thresh;
+				pthresh_tmp = rx_qinfo.conf.rx_thresh.pthresh;
+				hthresh_tmp = rx_qinfo.conf.rx_thresh.hthresh;
+				wthresh_tmp = rx_qinfo.conf.rx_thresh.wthresh;
+				offloads_tmp = rx_qinfo.conf.offloads;
+			}
 
 			printf("    RX queue: %d\n", qid);
 			printf("      RX desc=%d - RX free threshold=%d\n",
-				nb_rx_desc_tmp, rx_conf[qid].rx_free_thresh);
+				nb_rx_desc_tmp, rx_free_thresh_tmp);
 			printf("      RX threshold registers: pthresh=%d hthresh=%d "
 				" wthresh=%d\n",
-				rx_conf[qid].rx_thresh.pthresh,
-				rx_conf[qid].rx_thresh.hthresh,
-				rx_conf[qid].rx_thresh.wthresh);
-			printf("      RX Offloads=0x%"PRIx64"\n",
-				rx_conf[qid].offloads);
+				pthresh_tmp, hthresh_tmp, wthresh_tmp);
+			printf("      RX Offloads=0x%"PRIx64"\n", offloads_tmp);
 		}
 
 		/* per tx queue config only for first queue to be less verbose */
 		for (qid = 0; qid < 1; qid++) {
 			rc = rte_eth_tx_queue_info_get(pid, qid, &tx_qinfo);
-			if (rc)
+			if (rc) {
 				nb_tx_desc_tmp = nb_tx_desc[qid];
-			else
+				tx_free_thresh_tmp =
+					tx_conf[qid].tx_free_thresh;
+				pthresh_tmp = tx_conf[qid].tx_thresh.pthresh;
+				hthresh_tmp = tx_conf[qid].tx_thresh.hthresh;
+				wthresh_tmp = tx_conf[qid].tx_thresh.wthresh;
+				offloads_tmp = tx_conf[qid].offloads;
+				tx_rs_thresh_tmp = tx_conf[qid].tx_rs_thresh;
+			} else {
 				nb_tx_desc_tmp = tx_qinfo.nb_desc;
+				tx_free_thresh_tmp =
+						tx_qinfo.conf.tx_free_thresh;
+				pthresh_tmp = tx_qinfo.conf.tx_thresh.pthresh;
+				hthresh_tmp = tx_qinfo.conf.tx_thresh.hthresh;
+				wthresh_tmp = tx_qinfo.conf.tx_thresh.wthresh;
+				offloads_tmp = tx_qinfo.conf.offloads;
+				tx_rs_thresh_tmp = tx_qinfo.conf.tx_rs_thresh;
+			}
 
 			printf("    TX queue: %d\n", qid);
 			printf("      TX desc=%d - TX free threshold=%d\n",
-				nb_tx_desc_tmp, tx_conf[qid].tx_free_thresh);
+				nb_tx_desc_tmp, tx_free_thresh_tmp);
 			printf("      TX threshold registers: pthresh=%d hthresh=%d "
 				" wthresh=%d\n",
-				tx_conf[qid].tx_thresh.pthresh,
-				tx_conf[qid].tx_thresh.hthresh,
-				tx_conf[qid].tx_thresh.wthresh);
+				pthresh_tmp, hthresh_tmp, wthresh_tmp);
 			printf("      TX offloads=0x%"PRIx64" - TX RS bit threshold=%d\n",
-				tx_conf[qid].offloads, tx_conf->tx_rs_thresh);
+				offloads_tmp, tx_rs_thresh_tmp);
 		}
 	}
 }
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2020-09-19  7:40 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1600501034-50042-1-git-send-email-humin29@huawei.com>
2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 1/6] app/testpmd: fix missing verification of port id Min Hu (Connor)
2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 2/6] app/testpmd: fix VLAN offload configuration when config fail Min Hu (Connor)
2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 3/6] app/testpmd: remove restriction on txpkts set Min Hu (Connor)
2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 4/6] app/testpmd: fix packet header in txonly mode Min Hu (Connor)
2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 5/6] app/testpmd: fix valid desc id check Min Hu (Connor)
2020-09-19  7:37 ` [dpdk-stable] [PATCH v3 6/6] app/testpmd: fix displaying Rx Tx queues information Min Hu (Connor)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).