patches for DPDK stable branches
 help / color / mirror / Atom feed
* [PATCH] net/netvsc: fix issues with hot adding multiple VF PCI devices
@ 2022-03-24 17:46 longli
  2022-05-03 10:01 ` Ferruh Yigit
  0 siblings, 1 reply; 2+ messages in thread
From: longli @ 2022-03-24 17:46 UTC (permalink / raw)
  To: dev, Stephen Hemminger; +Cc: Long Li, stable

From: Long Li <longli@microsoft.com>

This patch fixes two issues with hot removing/adding a VF PCI device:
1. The original device argument is lost when it's hot added
2. If there are multiple VFs hot adding at the same time, some of the VFs may
not get added successfully because only one single VF status is stored in the
netvsc.

Fix these by storing the original device arguments and maintain a list of hot
add contexts to deal with multiple VF devices.

Fixes: a2a23a794b ("net/netvsc: support VF device hot add/remove")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
---
 drivers/net/netvsc/hn_ethdev.c | 78 +++++++++++++++++++++++++++-------
 drivers/net/netvsc/hn_var.h    | 12 +++++-
 drivers/net/netvsc/hn_vf.c     |  4 ++
 3 files changed, 77 insertions(+), 17 deletions(-)

diff --git a/drivers/net/netvsc/hn_ethdev.c b/drivers/net/netvsc/hn_ethdev.c
index 8a950403ac..0a357d3645 100644
--- a/drivers/net/netvsc/hn_ethdev.c
+++ b/drivers/net/netvsc/hn_ethdev.c
@@ -554,9 +554,10 @@ static int hn_subchan_configure(struct hn_data *hv,
 static void netvsc_hotplug_retry(void *args)
 {
 	int ret;
-	struct hn_data *hv = args;
+	struct hv_hotadd_context *hot_ctx = args;
+	struct hn_data *hv = hot_ctx->hv;
 	struct rte_eth_dev *dev = &rte_eth_devices[hv->port_id];
-	struct rte_devargs *d = &hv->devargs;
+	struct rte_devargs *d = &hot_ctx->da;
 	char buf[256];
 
 	DIR *di;
@@ -566,10 +567,13 @@ static void netvsc_hotplug_retry(void *args)
 	int s;
 
 	PMD_DRV_LOG(DEBUG, "%s: retry count %d",
-		    __func__, hv->eal_hot_plug_retry);
+		    __func__, hot_ctx->eal_hot_plug_retry);
 
-	if (hv->eal_hot_plug_retry++ > NETVSC_MAX_HOTADD_RETRY)
-		return;
+	if (hot_ctx->eal_hot_plug_retry++ > NETVSC_MAX_HOTADD_RETRY) {
+		PMD_DRV_LOG(NOTICE, "Failed to parse PCI device retry=%d",
+			    hot_ctx->eal_hot_plug_retry);
+		goto free_hotadd_ctx;
+	}
 
 	snprintf(buf, sizeof(buf), "/sys/bus/pci/devices/%s/net", d->name);
 	di = opendir(buf);
@@ -602,7 +606,7 @@ static void netvsc_hotplug_retry(void *args)
 		}
 		if (req.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
 			closedir(di);
-			return;
+			goto free_hotadd_ctx;
 		}
 		memcpy(eth_addr.addr_bytes, req.ifr_hwaddr.sa_data,
 		       RTE_DIM(eth_addr.addr_bytes));
@@ -611,8 +615,13 @@ static void netvsc_hotplug_retry(void *args)
 			PMD_DRV_LOG(NOTICE,
 				    "Found matching MAC address, adding device %s network name %s",
 				    d->name, dir->d_name);
+
+			/* If this device has been hot removed from this
+			 * parent device, restore its args.
+			 */
 			ret = rte_eal_hotplug_add(d->bus->name, d->name,
-						  d->args);
+						  hv->vf_devargs ?
+						  hv->vf_devargs : "");
 			if (ret) {
 				PMD_DRV_LOG(ERR,
 					    "Failed to add PCI device %s",
@@ -624,12 +633,20 @@ static void netvsc_hotplug_retry(void *args)
 		 * the device, or its MAC address did not match.
 		 */
 		closedir(di);
-		return;
+		goto free_hotadd_ctx;
 	}
 	closedir(di);
 retry:
 	/* The device is still being initialized, retry after 1 second */
-	rte_eal_alarm_set(1000000, netvsc_hotplug_retry, hv);
+	rte_eal_alarm_set(1000000, netvsc_hotplug_retry, hot_ctx);
+	return;
+
+free_hotadd_ctx:
+	rte_spinlock_lock(&hv->hotadd_lock);
+	LIST_REMOVE(hot_ctx, list);
+	rte_spinlock_unlock(&hv->hotadd_lock);
+
+	rte_free(hot_ctx);
 }
 
 static void
@@ -637,7 +654,8 @@ netvsc_hotadd_callback(const char *device_name, enum rte_dev_event_type type,
 		       void *arg)
 {
 	struct hn_data *hv = arg;
-	struct rte_devargs *d = &hv->devargs;
+	struct hv_hotadd_context *hot_ctx;
+	struct rte_devargs *d;
 	int ret;
 
 	PMD_DRV_LOG(INFO, "Device notification type=%d device_name=%s",
@@ -649,26 +667,42 @@ netvsc_hotadd_callback(const char *device_name, enum rte_dev_event_type type,
 		if (hv->vf_ctx.vf_state > vf_removed)
 			break;
 
+		hot_ctx = rte_zmalloc("NETVSC-HOTADD", sizeof(*hot_ctx),
+				      rte_mem_page_size());
+
+		if (!hot_ctx) {
+			PMD_DRV_LOG(ERR, "Failed to allocate hotadd context");
+			return;
+		}
+
+		hot_ctx->hv = hv;
+		d = &hot_ctx->da;
+
 		ret = rte_devargs_parse(d, device_name);
 		if (ret) {
 			PMD_DRV_LOG(ERR,
 				    "devargs parsing failed ret=%d", ret);
-			return;
+			goto free_ctx;
 		}
 
 		if (!strcmp(d->bus->name, "pci")) {
 			/* Start the process of figuring out if this
 			 * PCI device is a VF device
 			 */
-			hv->eal_hot_plug_retry = 0;
-			rte_eal_alarm_set(1000000, netvsc_hotplug_retry, hv);
+			rte_spinlock_lock(&hv->hotadd_lock);
+			LIST_INSERT_HEAD(&hv->hotadd_list, hot_ctx, list);
+			rte_spinlock_unlock(&hv->hotadd_lock);
+			rte_eal_alarm_set(1000000, netvsc_hotplug_retry, hot_ctx);
+			return;
 		}
 
 		/* We will switch to VF on RDNIS configure message
 		 * sent from VSP
 		 */
-
+free_ctx:
+		rte_free(hot_ctx);
 		break;
+
 	default:
 		break;
 	}
@@ -1003,12 +1037,20 @@ hn_dev_close(struct rte_eth_dev *dev)
 {
 	int ret;
 	struct hn_data *hv = dev->data->dev_private;
+	struct hv_hotadd_context *hot_ctx;
 
 	PMD_INIT_FUNC_TRACE();
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
 		return 0;
 
-	rte_eal_alarm_cancel(netvsc_hotplug_retry, &hv->devargs);
+	rte_spinlock_lock(&hv->hotadd_lock);
+	while (!LIST_EMPTY(&hv->hotadd_list)) {
+		hot_ctx = LIST_FIRST(&hv->hotadd_list);
+		rte_eal_alarm_cancel(netvsc_hotplug_retry, hot_ctx);
+		LIST_REMOVE(hot_ctx, list);
+		rte_free(hot_ctx);
+	}
+	rte_spinlock_unlock(&hv->hotadd_lock);
 
 	ret = hn_vf_close(dev);
 	hn_dev_free_queues(dev);
@@ -1097,6 +1139,9 @@ eth_hn_dev_init(struct rte_eth_dev *eth_dev)
 
 	PMD_INIT_FUNC_TRACE();
 
+	rte_spinlock_init(&hv->hotadd_lock);
+	LIST_INIT(&hv->hotadd_list);
+
 	vmbus = container_of(device, struct rte_vmbus_device, device);
 	eth_dev->dev_ops = &hn_eth_dev_ops;
 	eth_dev->rx_queue_count = hn_dev_rx_queue_count;
@@ -1221,6 +1266,9 @@ eth_hn_dev_uninit(struct rte_eth_dev *eth_dev)
 	ret_stop = hn_dev_stop(eth_dev);
 	hn_dev_close(eth_dev);
 
+	free(hv->vf_devargs);
+	hv->vf_devargs = NULL;
+
 	hn_detach(hv);
 	hn_chim_uninit(eth_dev);
 	rte_vmbus_chan_close(hv->primary->chan);
diff --git a/drivers/net/netvsc/hn_var.h b/drivers/net/netvsc/hn_var.h
index fbb3995507..416c042a27 100644
--- a/drivers/net/netvsc/hn_var.h
+++ b/drivers/net/netvsc/hn_var.h
@@ -126,6 +126,13 @@ struct hn_vf_ctx {
 	enum vf_device_state	vf_state;
 };
 
+struct hv_hotadd_context {
+	LIST_ENTRY(hv_hotadd_context) list;
+	struct hn_data *hv;
+	struct rte_devargs da;
+	int eal_hot_plug_retry;
+};
+
 struct hn_data {
 	struct rte_vmbus_device *vmbus;
 	struct hn_rx_queue *primary;
@@ -175,8 +182,9 @@ struct hn_data {
 
 	struct vmbus_channel *channels[HN_MAX_CHANNELS];
 
-	struct rte_devargs devargs;
-	int		eal_hot_plug_retry;
+	rte_spinlock_t	hotadd_lock;
+	LIST_HEAD(hotadd_list, hv_hotadd_context) hotadd_list;
+	char		*vf_devargs;
 };
 
 static inline struct vmbus_channel *
diff --git a/drivers/net/netvsc/hn_vf.c b/drivers/net/netvsc/hn_vf.c
index fead8eba5d..72bd899683 100644
--- a/drivers/net/netvsc/hn_vf.c
+++ b/drivers/net/netvsc/hn_vf.c
@@ -129,6 +129,10 @@ static void hn_remove_delayed(void *args)
 		PMD_DRV_LOG(ERR, "rte_eth_dev_stop failed port_id=%u ret=%d",
 			    port_id, ret);
 
+	/* Record the device parameters for possible hotplug events */
+	if (dev->devargs && dev->devargs->args)
+		hv->vf_devargs = strdup(dev->devargs->args);
+
 	ret = rte_eth_dev_close(port_id);
 	if (ret)
 		PMD_DRV_LOG(ERR, "rte_eth_dev_close failed port_id=%u ret=%d",
-- 
2.32.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] net/netvsc: fix issues with hot adding multiple VF PCI devices
  2022-03-24 17:46 [PATCH] net/netvsc: fix issues with hot adding multiple VF PCI devices longli
@ 2022-05-03 10:01 ` Ferruh Yigit
  0 siblings, 0 replies; 2+ messages in thread
From: Ferruh Yigit @ 2022-05-03 10:01 UTC (permalink / raw)
  To: longli, dev, Stephen Hemminger; +Cc: Long Li, stable

On 3/24/2022 5:46 PM, longli@linuxonhyperv.com wrote:
> From: Long Li <longli@microsoft.com>
> 
> This patch fixes two issues with hot removing/adding a VF PCI device:
> 1. The original device argument is lost when it's hot added
> 2. If there are multiple VFs hot adding at the same time, some of the VFs may
> not get added successfully because only one single VF status is stored in the
> netvsc.
> 
> Fix these by storing the original device arguments and maintain a list of hot
> add contexts to deal with multiple VF devices.
> 
> Fixes: a2a23a794b ("net/netvsc: support VF device hot add/remove")
> Cc: stable@dpdk.org
 >
> Signed-off-by: Long Li <longli@microsoft.com>

Applied to dpdk-next-net/main, thanks.

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-05-03 10:01 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-24 17:46 [PATCH] net/netvsc: fix issues with hot adding multiple VF PCI devices longli
2022-05-03 10:01 ` Ferruh Yigit

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).