patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Dongdong Liu <liudongdong3@huawei.com>
To: <dev@dpdk.org>
Cc: <yux.jiang@intel.com>, <zhiminx.huang@intel.com>,
	<qingx.sun@intel.com>, <ferruh.yigit@xilinx.com>,
	<songx.jiale@intel.com>, <stable@dpdk.org>,
	Huisong Li <lihuisong@huawei.com>,
	Dongdong Liu <liudongdong3@huawei.com>,
	Chas Williams <chas3@att.com>,
	"Min Hu (Connor)" <humin29@huawei.com>,
	Declan Doherty <declan.doherty@intel.com>,
	Tomasz Kulasek <tomaszx.kulasek@intel.com>
Subject: [PATCH 2/2] app/test: fix bonding RSS test when disable RSS
Date: Wed, 8 Jun 2022 19:45:48 +0800	[thread overview]
Message-ID: <20220608114548.25837-3-liudongdong3@huawei.com> (raw)
In-Reply-To: <20220608114548.25837-1-liudongdong3@huawei.com>

From: Huisong Li <lihuisong@huawei.com>

The "test_rss_lazy" test is used for testing bonding RSS functions
when bonded port disable RSS. Currently, this test case can update
RSS functions of bonded and slave port if bonded port turns off RSS.
It is unreasonable and has been adjusted to be non-updateable in
following patch:
"93e1ea6dfa99 ethdev: fix RSS update when RSS is disabled"

So this patch fixes this test code.

Fixes: 43b630244e7e ("app/test: add dynamic bonding RSS configuration")
Cc: stable@dpdk.org

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
 app/test/test_link_bonding_rssconf.c | 78 ++++++++++++++++++++++++++--
 1 file changed, 73 insertions(+), 5 deletions(-)

diff --git a/app/test/test_link_bonding_rssconf.c b/app/test/test_link_bonding_rssconf.c
index 7228965ced..b3d71c6f3a 100644
--- a/app/test/test_link_bonding_rssconf.c
+++ b/app/test/test_link_bonding_rssconf.c
@@ -468,15 +468,85 @@ test_rss(void)
 
 	TEST_ASSERT_SUCCESS(test_propagate(), "Propagation test failed");
 
-	TEST_ASSERT(slave_remove_and_add() == 1, "New slave should be synced");
+	TEST_ASSERT(slave_remove_and_add() == 1, "remove and add slaves success.");
 
 	remove_slaves_and_stop_bonded_device();
 
 	return TEST_SUCCESS;
 }
 
+
+/**
+ * Test RSS configuration over bonded and slaves.
+ */
+static int
+test_rss_config_lazy(void)
+{
+	struct rte_eth_rss_conf bond_rss_conf = {0};
+	struct slave_conf *port;
+	uint8_t rss_key[40];
+	uint64_t rss_hf;
+	int retval;
+	uint16_t i;
+	uint8_t n;
+
+	retval = rte_eth_dev_info_get(test_params.bond_port_id,
+				      &test_params.bond_dev_info);
+	TEST_ASSERT((retval == 0), "Error during getting device (port %u) info: %s\n",
+		    test_params.bond_port_id, strerror(-retval));
+
+	rss_hf = test_params.bond_dev_info.flow_type_rss_offloads;
+	if (rss_hf != 0) {
+		bond_rss_conf.rss_key = NULL;
+		bond_rss_conf.rss_hf = rss_hf;
+		retval = rte_eth_dev_rss_hash_update(test_params.bond_port_id,
+						     &bond_rss_conf);
+		TEST_ASSERT(retval != 0, "Succeeded in setting bonded port hash function");
+	}
+
+	/* Set all keys to zero for all slaves */
+	FOR_EACH_PORT(n, port) {
+		port = &test_params.slave_ports[n];
+		retval = rte_eth_dev_rss_hash_conf_get(port->port_id,
+						       &port->rss_conf);
+		TEST_ASSERT_SUCCESS(retval, "Cannot get slaves RSS configuration");
+		memset(port->rss_key, 0, sizeof(port->rss_key));
+		port->rss_conf.rss_key = port->rss_key;
+		port->rss_conf.rss_key_len = sizeof(port->rss_key);
+		retval = rte_eth_dev_rss_hash_update(port->port_id,
+						     &port->rss_conf);
+		TEST_ASSERT(retval != 0, "Succeeded in setting slaves RSS keys");
+	}
+
+	/* Set RSS keys for bonded port */
+	memset(rss_key, 1, sizeof(rss_key));
+	bond_rss_conf.rss_hf = rss_hf;
+	bond_rss_conf.rss_key = rss_key;
+	bond_rss_conf.rss_key_len = sizeof(rss_key);
+
+	retval = rte_eth_dev_rss_hash_update(test_params.bond_port_id,
+					     &bond_rss_conf);
+	TEST_ASSERT(retval != 0, "Succeeded in setting bonded port RSS keys");
+
+	/*  Test RETA propagation */
+	for (i = 0; i < RXTX_QUEUE_COUNT; i++) {
+		FOR_EACH_PORT(n, port) {
+			port = &test_params.slave_ports[n];
+			retval = reta_set(port->port_id, (i + 1) % RXTX_QUEUE_COUNT,
+					  port->dev_info.reta_size);
+			TEST_ASSERT(retval != 0, "Succeeded in setting slaves RETA");
+		}
+
+		retval = reta_set(test_params.bond_port_id, i % RXTX_QUEUE_COUNT,
+				  test_params.bond_dev_info.reta_size);
+		TEST_ASSERT(retval != 0, "Succeeded in setting bonded port RETA");
+	}
+
+	return TEST_SUCCESS;
+}
+
 /**
- * Test propagation logic, when RX_RSS mq_mode is turned off for bonding port
+ * Test RSS function logic, when RX_RSS mq_mode is turned off for bonding port
  */
 static int
 test_rss_lazy(void)
@@ -497,9 +567,7 @@ test_rss_lazy(void)
 	TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params.bond_port_id),
 			"Failed to start bonding port (%d).", test_params.bond_port_id);
 
-	TEST_ASSERT_SUCCESS(test_propagate(), "Propagation test failed");
-
-	TEST_ASSERT(slave_remove_and_add() == 0, "New slave shouldn't be synced");
+	TEST_ASSERT_SUCCESS(test_rss_config_lazy(), "Succeeded in setting RSS hash when RX_RSS mq_mode is turned off");
 
 	remove_slaves_and_stop_bonded_device();
 
-- 
2.33.0


  parent reply	other threads:[~2022-06-08 11:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-08 11:45 [PATCH 0/2] " Dongdong Liu
2022-06-08 11:45 ` [PATCH 1/2] net/bonding: fix RSS inconsistent between bonded and slaves Dongdong Liu
2022-06-09  8:52   ` Andrew Rybchenko
2022-06-08 11:45 ` Dongdong Liu [this message]
2022-06-09  8:53 ` [PATCH 0/2] app/test: fix bonding RSS test when disable RSS Andrew Rybchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220608114548.25837-3-liudongdong3@huawei.com \
    --to=liudongdong3@huawei.com \
    --cc=chas3@att.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@xilinx.com \
    --cc=humin29@huawei.com \
    --cc=lihuisong@huawei.com \
    --cc=qingx.sun@intel.com \
    --cc=songx.jiale@intel.com \
    --cc=stable@dpdk.org \
    --cc=tomaszx.kulasek@intel.com \
    --cc=yux.jiang@intel.com \
    --cc=zhiminx.huang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).