From: sys_stv@intel.com
To: test-report@dpdk.org
Subject: [dpdk-test-report] |FAILURE| pw56110[v2] mempool/octeontx2: fix arm64 clang build failure
Date: 05 Jul 2019 09:05:54 -0700 [thread overview]
Message-ID: <ee68f5$7cn1s0@orsmga001.jf.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 5882 bytes --]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/56110
_apply issues_
Submitter: Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>
Date: 2019-07-05 04:26:50
Reply_mail: 20190705042650.3457-1-pbhagavatula@marvell.com
DPDK git baseline:
Repo:dpdk, CommitID: 703458e19c16135143b3f30089e1af66100c82dc
*Repo: dpdk
* CASP inline-asm. i.e. if the optimization level is reduced to -O0 the
* CASP restrictions aren't followed and the compiler might end up violation the
* CASP rules. Fix it by explicitly providing ((optimize("-O3"))).
*
* Example:
* ccSPMGzq.s:1648: Error: reg pair must start from even reg at
* operand 1 - `casp x21,x22,x0,x1,[x19]'
*/
static __attribute__((optimize("-O3"))) __rte_noinline int __hot
npa_lf_aura_op_alloc_bulk(const int64_t wdata, int64_t * const addr,
unsigned int n, void **obj_table)
{
const __uint128_t wdata128 = ((__uint128_t)wdata << 64) | wdata;
uint64x2_t failed = vdupq_n_u64(~0);
switch (n) {
case 32:
{
__uint128_t t0, t1, t2, t3, t4, t5, t6, t7, t8, t9;
--
"fmov v18.D[1], %H[t2]\n"
"casp %[t2], %H[t2], %[wdata], %H[wdata], [%[loc]]\n"
"fmov d19, %[t3]\n"
"fmov v19.D[1], %H[t3]\n"
"casp %[t3], %H[t3], %[wdata], %H[wdata], [%[loc]]\n"
"and %[failed].16B, %[failed].16B, v16.16B\n"
"and %[failed].16B, %[failed].16B, v17.16B\n"
"and %[failed].16B, %[failed].16B, v18.16B\n"
"and %[failed].16B, %[failed].16B, v19.16B\n"
"fmov d20, %[t4]\n"
"fmov v20.D[1], %H[t4]\n"
"fmov d21, %[t5]\n"
"fmov v21.D[1], %H[t5]\n"
"fmov d22, %[t6]\n"
"fmov v22.D[1], %H[t6]\n"
"fmov d23, %[t7]\n"
"fmov v23.D[1], %H[t7]\n"
"and %[failed].16B, %[failed].16B, v20.16B\n"
"and %[failed].16B, %[failed].16B, v21.16B\n"
"and %[failed].16B, %[failed].16B, v22.16B\n"
"and %[failed].16B, %[failed].16B, v23.16B\n"
"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
"st1 { v20.2d, v21.2d, v22.2d, v23.2d}, [%[dst]], 64\n"
"fmov d16, %[t8]\n"
"fmov v16.D[1], %H[t8]\n"
"fmov d17, %[t9]\n"
"fmov v17.D[1], %H[t9]\n"
"fmov d18, %[t10]\n"
"fmov v18.D[1], %H[t10]\n"
"fmov d19, %[t11]\n"
"fmov v19.D[1], %H[t11]\n"
"and %[failed].16B, %[failed].16B, v16.16B\n"
"and %[failed].16B, %[failed].16B, v17.16B\n"
"and %[failed].16B, %[failed].16B, v18.16B\n"
"and %[failed].16B, %[failed].16B, v19.16B\n"
"fmov d20, %[t0]\n"
"fmov v20.D[1], %H[t0]\n"
"fmov d21, %[t1]\n"
"fmov v21.D[1], %H[t1]\n"
"fmov d22, %[t2]\n"
"fmov v22.D[1], %H[t2]\n"
"fmov d23, %[t3]\n"
"fmov v23.D[1], %H[t3]\n"
"and %[failed].16B, %[failed].16B, v20.16B\n"
"and %[failed].16B, %[failed].16B, v21.16B\n"
"and %[failed].16B, %[failed].16B, v22.16B\n"
"and %[failed].16B, %[failed].16B, v23.16B\n"
"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
"st1 { v20.2d, v21.2d, v22.2d, v23.2d}, [%[dst]], 64\n"
: "+Q" (*addr), [failed] "=&w" (failed),
[t0] "=&r" (t0), [t1] "=&r" (t1), [t2] "=&r" (t2),
[t3] "=&r" (t3), [t4] "=&r" (t4), [t5] "=&r" (t5),
[t6] "=&r" (t6), [t7] "=&r" (t7), [t8] "=&r" (t8),
[t9] "=&r" (t9), [t10] "=&r" (t10), [t11] "=&r" (t11)
: [wdata] "r" (wdata128), [dst] "r" (obj_table),
--
"fmov v17.D[1], %H[t1]\n"
"fmov d18, %[t2]\n"
"fmov v18.D[1], %H[t2]\n"
"fmov d19, %[t3]\n"
"fmov v19.D[1], %H[t3]\n"
"and %[failed].16B, %[failed].16B, v16.16B\n"
"and %[failed].16B, %[failed].16B, v17.16B\n"
"and %[failed].16B, %[failed].16B, v18.16B\n"
"and %[failed].16B, %[failed].16B, v19.16B\n"
"fmov d20, %[t4]\n"
"fmov v20.D[1], %H[t4]\n"
"fmov d21, %[t5]\n"
"fmov v21.D[1], %H[t5]\n"
"fmov d22, %[t6]\n"
"fmov v22.D[1], %H[t6]\n"
"fmov d23, %[t7]\n"
"fmov v23.D[1], %H[t7]\n"
"and %[failed].16B, %[failed].16B, v20.16B\n"
"and %[failed].16B, %[failed].16B, v21.16B\n"
"and %[failed].16B, %[failed].16B, v22.16B\n"
"and %[failed].16B, %[failed].16B, v23.16B\n"
"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
"st1 { v20.2d, v21.2d, v22.2d, v23.2d}, [%[dst]], 64\n"
: "+Q" (*addr), [failed] "=&w" (failed),
[t0] "=&r" (t0), [t1] "=&r" (t1), [t2] "=&r" (t2),
[t3] "=&r" (t3), [t4] "=&r" (t4), [t5] "=&r" (t5),
[t6] "=&r" (t6), [t7] "=&r" (t7)
: [wdata] "r" (wdata128), [dst] "r" (obj_table),
[loc] "r" (addr)
--
"fmov v17.D[1], %H[t1]\n"
"fmov d18, %[t2]\n"
"fmov v18.D[1], %H[t2]\n"
"fmov d19, %[t3]\n"
"fmov v19.D[1], %H[t3]\n"
"and %[failed].16B, %[failed].16B, v16.16B\n"
"and %[failed].16B, %[failed].16B, v17.16B\n"
"and %[failed].16B, %[failed].16B, v18.16B\n"
"and %[failed].16B, %[failed].16B, v19.16B\n"
"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
: "+Q" (*addr), [failed] "=&w" (failed),
[t0] "=&r" (t0), [t1] "=&r" (t1), [t2] "=&r" (t2),
[t3] "=&r" (t3)
: [wdata] "r" (wdata128), [dst] "r" (obj_table),
[loc] "r" (addr)
: "memory", "v16", "v17", "v18", "v19"
--
"casp %[t1], %H[t1], %[wdata], %H[wdata], [%[loc]]\n"
"fmov d16, %[t0]\n"
"fmov v16.D[1], %H[t0]\n"
"fmov d17, %[t1]\n"
"fmov v17.D[1], %H[t1]\n"
"and %[failed].16B, %[failed].16B, v16.16B\n"
"and %[failed].16B, %[failed].16B, v17.16B\n"
"st1 { v16.2d, v17.2d}, [%[dst]], 32\n"
: "+Q" (*addr), [failed] "=&w" (failed),
[t0] "=&r" (t0), [t1] "=&r" (t1)
: [wdata] "r" (wdata128), [dst] "r" (obj_table),
[loc] "r" (addr)
: "memory", "v16", "v17"
);
--
asm volatile (
".cpu generic+lse\n"
"casp %[t0], %H[t0], %[wdata], %H[wdata], [%[loc]]\n"
"fmov d16, %[t0]\n"
"fmov v16.D[1], %H[t0]\n"
"and %[failed].16B, %[failed].16B, v16.16B\n"
"st1 { v16.2d}, [%[dst]], 16\n"
: "+Q" (*addr), [failed] "=&w" (failed),
[t0] "=&r" (t0)
: [wdata] "r" (wdata128), [dst] "r" (obj_table),
[loc] "r" (addr)
: "memory", "v16"
);
break;
}
error: patch failed: drivers/mempool/octeontx2/otx2_mempool_ops.c:54
error: drivers/mempool/octeontx2/otx2_mempool_ops.c: patch does not apply
DPDK STV team
reply other threads:[~2019-07-05 16:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='ee68f5$7cn1s0@orsmga001.jf.intel.com' \
--to=sys_stv@intel.com \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).