[dpdk-users] Inconsistent results for varying packet sizes

[dpdk-users] Inconsistent results for varying packet sizes

[Chris Pappas]

Hi everyone,

we have done some basic testing with DPDK. We are testing the baseline
forwarding performance (table lookup code has been commented out and we
statically forward traffic among a 1-1 incoming to outgoing port
assignment), but we get weird results (attached).

For 256-byte packets the average latency is lower than for 128-byte
packets, but for 1500-byte packets the latency is much higher than the
previous two packet sizes.

Could you please let us know if this is something expected, since it is
counter-intuitive,
or if we are having some obvious configuration mistake?
Our configuration is as following:

Best regards,
Chris

*Command*
sudo ./build/l3fwd -c 0xffff -n 4 -- -p 0xfff -P
--config="(0,0,1),(1,0,2),(2,0,3),(3,0,4),(4,0,8),(5,0,9),(
6,0,10),(7,0,11),(8,0,12),(9,0,13),(10,0,14),(11,0,15)"

*Core assignment (one core per one port)*
L3FWD: entering main loop on lcore 1
L3FWD:  -- lcoreid=1 portid=0 rxqueueid=0
L3FWD: entering main loop on lcore 2
L3FWD:  -- lcoreid=2 portid=1 rxqueueid=0
L3FWD: entering main loop on lcore 3
L3FWD:  -- lcoreid=3 portid=2 rxqueueid=0
L3FWD: entering main loop on lcore 4
L3FWD:  -- lcoreid=4 portid=3 rxqueueid=0
L3FWD: lcore 5 has nothing to do
L3FWD: lcore 6 has nothing to do
L3FWD: lcore 7 has nothing to do
L3FWD: entering main loop on lcore 8
L3FWD:  -- lcoreid=8 portid=4 rxqueueid=0
L3FWD: entering main loop on lcore 9
L3FWD:  -- lcoreid=9 portid=5 rxqueueid=0
L3FWD: entering main loop on lcore 10
L3FWD:  -- lcoreid=10 portid=6 rxqueueid=0
L3FWD: entering main loop on lcore 11
L3FWD:  -- lcoreid=11 portid=7 rxqueueid=0
L3FWD: entering main loop on lcore 12
L3FWD:  -- lcoreid=12 portid=8 rxqueueid=0
L3FWD: entering main loop on lcore 13
L3FWD:  -- lcoreid=13 portid=9 rxqueueid=0
L3FWD: entering main loop on lcore 14
L3FWD:  -- lcoreid=14 portid=10 rxqueueid=0
L3FWD: entering main loop on lcore 15
L3FWD:  -- lcoreid=15 portid=11 rxqueueid=0
L3FWD: lcore 0 has nothing to do