DPDK usage discussions
 help / color / mirror / Atom feed
* [dpdk-users] SW Turbo Poll Mode Driver
@ 2021-09-14 10:58 Ginés García Avilés
  2021-09-29 10:41 ` Thomas Monjalon
  0 siblings, 1 reply; 7+ messages in thread
From: Ginés García Avilés @ 2021-09-14 10:58 UTC (permalink / raw)
  To: users

Hi all,
After following the steps listed here (3. SW Turbo Poll Mode Driver — Data
Plane Development Kit 21.08.0 documentation (dpdk.org)
<http://doc.dpdk.org/guides/bbdevs/turbo_sw.html#>), using the specific
versions of
DPDK and FlexRAN, I'm facing an error while trying to run one of the bbdev
tests:
  - command:
    > python2 test-bbdev.py
-e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" -c validation -v
turbo_dec_default.data
  - Error:
    > "Device 0 (baseband_turbo_sw) does not support specified capabilities"

which I think is due to an incorrect linkage of DPDK and FlexRAN. I have
checked all the environmental variables pointing to the different
components  and everything seems to be correct.

Any suggestions about how to solve this problem?

Thanks a lot for your help,
Ginés.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-users] SW Turbo Poll Mode Driver
  2021-09-14 10:58 [dpdk-users] SW Turbo Poll Mode Driver Ginés García Avilés
@ 2021-09-29 10:41 ` Thomas Monjalon
  2021-10-04 21:05   ` Chautru, Nicolas
  0 siblings, 1 reply; 7+ messages in thread
From: Thomas Monjalon @ 2021-09-29 10:41 UTC (permalink / raw)
  To: Ginés García Avilés; +Cc: users, nicolas.chautru

+Cc maintainer

14/09/2021 12:58, Ginés García Avilés:
> Hi all,
> After following the steps listed here (3. SW Turbo Poll Mode Driver — Data
> Plane Development Kit 21.08.0 documentation (dpdk.org)
> <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html#>), using the specific
> versions of
> DPDK and FlexRAN, I'm facing an error while trying to run one of the bbdev
> tests:
>   - command:
>     > python2 test-bbdev.py
> -e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" -c validation -v
> turbo_dec_default.data
>   - Error:
>     > "Device 0 (baseband_turbo_sw) does not support specified capabilities"
> 
> which I think is due to an incorrect linkage of DPDK and FlexRAN. I have
> checked all the environmental variables pointing to the different
> components  and everything seems to be correct.
> 
> Any suggestions about how to solve this problem?
> 
> Thanks a lot for your help,
> Ginés.




^ permalink raw reply	[flat|nested] 7+ messages in thread

* RE: [dpdk-users] SW Turbo Poll Mode Driver
  2021-09-29 10:41 ` Thomas Monjalon
@ 2021-10-04 21:05   ` Chautru, Nicolas
  2021-10-05  7:02     ` Ginés García Avilés
  0 siblings, 1 reply; 7+ messages in thread
From: Chautru, Nicolas @ 2021-10-04 21:05 UTC (permalink / raw)
  To: Thomas Monjalon, Ginés García Avilés; +Cc: users

Hi Gines, 
The only thing is to make sure to set the meson option to point to the right location 
See https://doc.dpdk.org/guides/bbdevs/turbo_sw.html : for instance something like this "meson configure -Dflexran_sdk=xxx/build-avx512-icc/install"
Then meson build framework will just link the libraries: see drivers\baseband\turbo_sw\meson.build which uses cc.find_library to dynamically find and link the libraries

> -----Original Message-----
> From: Thomas Monjalon <thomas@monjalon.net>
> Sent: Wednesday, September 29, 2021 3:41 AM
> To: Ginés García Avilés <gines.garcia@i2cat.net>
> Cc: users@dpdk.org; Chautru, Nicolas <nicolas.chautru@intel.com>
> Subject: Re: [dpdk-users] SW Turbo Poll Mode Driver
> 
> +Cc maintainer
> 
> 14/09/2021 12:58, Ginés García Avilés:
> > Hi all,
> > After following the steps listed here (3. SW Turbo Poll Mode Driver —
> > Data Plane Development Kit 21.08.0 documentation (dpdk.org)
> > <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html#>), using the
> > specific versions of DPDK and FlexRAN, I'm facing an error while
> > trying to run one of the bbdev
> > tests:
> >   - command:
> >     > python2 test-bbdev.py
> > -e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" -c
> > validation -v turbo_dec_default.data
> >   - Error:
> >     > "Device 0 (baseband_turbo_sw) does not support specified
> capabilities"
> >
> > which I think is due to an incorrect linkage of DPDK and FlexRAN. I
> > have checked all the environmental variables pointing to the different
> > components  and everything seems to be correct.
> >
> > Any suggestions about how to solve this problem?
> >
> > Thanks a lot for your help,
> > Ginés.
> 
> 


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-users] SW Turbo Poll Mode Driver
  2021-10-04 21:05   ` Chautru, Nicolas
@ 2021-10-05  7:02     ` Ginés García Avilés
  2021-10-05 20:56       ` Chautru, Nicolas
  0 siblings, 1 reply; 7+ messages in thread
From: Ginés García Avilés @ 2021-10-05  7:02 UTC (permalink / raw)
  To: Chautru, Nicolas; +Cc: Thomas Monjalon, users

Hi Nicolas,
thanks a lot for your help.

However, with the latest version of DPDK I'm still facing the following
issue:
  - "drivers/baseband/turbo_sw/meson.build:13:4: ERROR: C library
'libstdc++' not found"

These are the steps I'm actually following for the whole process:
  - Set env vars (*ICC *compiler, FLEXRAN_SDK, DIR_WIRELESS_SDK, ...)
  - meson x86_64-native-linux-icc
  - cd x86_64-native-linux-icc
  - meson configure -Dflexran_sdk=xxx/build-avx512-icc/install
  - ninja

Thanks in advance,
Ginés.

El lun, 4 oct 2021 a las 23:05, Chautru, Nicolas (<nicolas.chautru@intel.com>)
escribió:

> Hi Gines,
> The only thing is to make sure to set the meson option to point to the
> right location
> See https://doc.dpdk.org/guides/bbdevs/turbo_sw.html : for instance
> something like this "meson configure
> -Dflexran_sdk=xxx/build-avx512-icc/install"
> Then meson build framework will just link the libraries: see
> drivers\baseband\turbo_sw\meson.build which uses cc.find_library to
> dynamically find and link the libraries
>
> > -----Original Message-----
> > From: Thomas Monjalon <thomas@monjalon.net>
> > Sent: Wednesday, September 29, 2021 3:41 AM
> > To: Ginés García Avilés <gines.garcia@i2cat.net>
> > Cc: users@dpdk.org; Chautru, Nicolas <nicolas.chautru@intel.com>
> > Subject: Re: [dpdk-users] SW Turbo Poll Mode Driver
> >
> > +Cc maintainer
> >
> > 14/09/2021 12:58, Ginés García Avilés:
> > > Hi all,
> > > After following the steps listed here (3. SW Turbo Poll Mode Driver —
> > > Data Plane Development Kit 21.08.0 documentation (dpdk.org)
> > > <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html#>), using the
> > > specific versions of DPDK and FlexRAN, I'm facing an error while
> > > trying to run one of the bbdev
> > > tests:
> > >   - command:
> > >     > python2 test-bbdev.py
> > > -e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" -c
> > > validation -v turbo_dec_default.data
> > >   - Error:
> > >     > "Device 0 (baseband_turbo_sw) does not support specified
> > capabilities"
> > >
> > > which I think is due to an incorrect linkage of DPDK and FlexRAN. I
> > > have checked all the environmental variables pointing to the different
> > > components  and everything seems to be correct.
> > >
> > > Any suggestions about how to solve this problem?
> > >
> > > Thanks a lot for your help,
> > > Ginés.
> >
> >
>
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* RE: [dpdk-users] SW Turbo Poll Mode Driver
  2021-10-05  7:02     ` Ginés García Avilés
@ 2021-10-05 20:56       ` Chautru, Nicolas
  2021-10-13 15:30         ` Ginés García Avilés
  0 siblings, 1 reply; 7+ messages in thread
From: Chautru, Nicolas @ 2021-10-05 20:56 UTC (permalink / raw)
  To: Ginés García Avilés; +Cc: Thomas Monjalon, users

Hi Gines,
I don’t see such issue, you probably have to make sure libstdc++ is installed and accessible by meson.

From: Ginés García Avilés <gines.garcia@i2cat.net>
Sent: Tuesday, October 5, 2021 12:03 AM
To: Chautru, Nicolas <nicolas.chautru@intel.com>
Cc: Thomas Monjalon <thomas@monjalon.net>; users@dpdk.org
Subject: Re: [dpdk-users] SW Turbo Poll Mode Driver

Hi Nicolas,
thanks a lot for your help.

However, with the latest version of DPDK I'm still facing the following issue:
  - "drivers/baseband/turbo_sw/meson.build:13:4: ERROR: C library 'libstdc++' not found"

These are the steps I'm actually following for the whole process:
  - Set env vars (ICC compiler, FLEXRAN_SDK, DIR_WIRELESS_SDK, ...)
  - meson x86_64-native-linux-icc
  - cd x86_64-native-linux-icc
  - meson configure -Dflexran_sdk=xxx/build-avx512-icc/install
  - ninja

Thanks in advance,
Ginés.

El lun, 4 oct 2021 a las 23:05, Chautru, Nicolas (<nicolas.chautru@intel.com<mailto:nicolas.chautru@intel.com>>) escribió:
Hi Gines,
The only thing is to make sure to set the meson option to point to the right location
See https://doc.dpdk.org/guides/bbdevs/turbo_sw.html : for instance something like this "meson configure -Dflexran_sdk=xxx/build-avx512-icc/install"
Then meson build framework will just link the libraries: see drivers\baseband\turbo_sw\meson.build which uses cc.find_library to dynamically find and link the libraries

> -----Original Message-----
> From: Thomas Monjalon <thomas@monjalon.net<mailto:thomas@monjalon.net>>
> Sent: Wednesday, September 29, 2021 3:41 AM
> To: Ginés García Avilés <gines.garcia@i2cat.net<mailto:gines.garcia@i2cat.net>>
> Cc: users@dpdk.org<mailto:users@dpdk.org>; Chautru, Nicolas <nicolas.chautru@intel.com<mailto:nicolas.chautru@intel.com>>
> Subject: Re: [dpdk-users] SW Turbo Poll Mode Driver
>
> +Cc maintainer
>
> 14/09/2021 12:58, Ginés García Avilés:
> > Hi all,
> > After following the steps listed here (3. SW Turbo Poll Mode Driver —
> > Data Plane Development Kit 21.08.0 documentation (dpdk.org<http://dpdk.org>)
> > <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html#<http://doc.dpdk.org/guides/bbdevs/turbo_sw.html>>), using the
> > specific versions of DPDK and FlexRAN, I'm facing an error while
> > trying to run one of the bbdev
> > tests:
> >   - command:
> >     > python2 test-bbdev.py
> > -e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" -c
> > validation -v turbo_dec_default.data
> >   - Error:
> >     > "Device 0 (baseband_turbo_sw) does not support specified
> capabilities"
> >
> > which I think is due to an incorrect linkage of DPDK and FlexRAN. I
> > have checked all the environmental variables pointing to the different
> > components  and everything seems to be correct.
> >
> > Any suggestions about how to solve this problem?
> >
> > Thanks a lot for your help,
> > Ginés.
>
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-users] SW Turbo Poll Mode Driver
  2021-10-05 20:56       ` Chautru, Nicolas
@ 2021-10-13 15:30         ` Ginés García Avilés
  2021-10-19  9:02           ` Ginés García Avilés
  0 siblings, 1 reply; 7+ messages in thread
From: Ginés García Avilés @ 2021-10-13 15:30 UTC (permalink / raw)
  To: Chautru, Nicolas; +Cc: Thomas Monjalon, users

Hi Nicolas,
thanks a lot for your reply.

I'm trying to build DPDK with ICC but I'm not sure why libstdc++ is not
accessible for meson. As a workaround, I'm
checking gcc in order to see whether the installation is correct or not (as
far as I know icc takes some info from gcc).

As an alternative, If I move to gcc as the compiler used by meson, I'm
getting the following error for each operation provided by FlexRAN:

  - "libldpc_encoder_5gnr.a(phy_ldpc_encoder_5gnr.cpp.o): relocation
R_X86_64_32S against `.rodata.str1.32' can not be used when making a shared
object; recompile with -fPIC"

I have checked the fPIC flag and it is already included when compiling the
turbo_sw driver.

  - Versions:
      > FlexRAN 19.04
      > DPDK 21.08
      > gcc Ubuntu 9.3.0
      > Ubuntu 20.04

Should I use gcc or icc for compiling dpdk? Any ideas about what could be
the issue in the previous environments?

Thanks a lot in advance,
Ginés.


El mar, 5 oct 2021 a las 22:57, Chautru, Nicolas (<nicolas.chautru@intel.com>)
escribió:

> Hi Gines,
>
> I don’t see such issue, you probably have to make sure libstdc++ is
> installed and accessible by meson.
>
>
>
> *From:* Ginés García Avilés <gines.garcia@i2cat.net>
> *Sent:* Tuesday, October 5, 2021 12:03 AM
> *To:* Chautru, Nicolas <nicolas.chautru@intel.com>
> *Cc:* Thomas Monjalon <thomas@monjalon.net>; users@dpdk.org
> *Subject:* Re: [dpdk-users] SW Turbo Poll Mode Driver
>
>
>
> Hi Nicolas,
>
> thanks a lot for your help.
>
>
>
> However, with the latest version of DPDK I'm still facing the following
> issue:
>
>   - "drivers/baseband/turbo_sw/meson.build:13:4: ERROR: C library
> 'libstdc++' not found"
>
>
>
> These are the steps I'm actually following for the whole process:
>
>   - Set env vars (*ICC *compiler, FLEXRAN_SDK, DIR_WIRELESS_SDK, ...)
>
>   - meson x86_64-native-linux-icc
>
>   - cd x86_64-native-linux-icc
>
>   - meson configure -Dflexran_sdk=xxx/build-avx512-icc/install
>
>   - ninja
>
>
>
> Thanks in advance,
>
> Ginés.
>
>
>
> El lun, 4 oct 2021 a las 23:05, Chautru, Nicolas (<
> nicolas.chautru@intel.com>) escribió:
>
> Hi Gines,
> The only thing is to make sure to set the meson option to point to the
> right location
> See https://doc.dpdk.org/guides/bbdevs/turbo_sw.html : for instance
> something like this "meson configure
> -Dflexran_sdk=xxx/build-avx512-icc/install"
> Then meson build framework will just link the libraries: see
> drivers\baseband\turbo_sw\meson.build which uses cc.find_library to
> dynamically find and link the libraries
>
> > -----Original Message-----
> > From: Thomas Monjalon <thomas@monjalon.net>
> > Sent: Wednesday, September 29, 2021 3:41 AM
> > To: Ginés García Avilés <gines.garcia@i2cat.net>
> > Cc: users@dpdk.org; Chautru, Nicolas <nicolas.chautru@intel.com>
> > Subject: Re: [dpdk-users] SW Turbo Poll Mode Driver
> >
> > +Cc maintainer
> >
> > 14/09/2021 12:58, Ginés García Avilés:
> > > Hi all,
> > > After following the steps listed here (3. SW Turbo Poll Mode Driver —
> > > Data Plane Development Kit 21.08.0 documentation (dpdk.org)
> > > <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html#
> <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html>>), using the
> > > specific versions of DPDK and FlexRAN, I'm facing an error while
> > > trying to run one of the bbdev
> > > tests:
> > >   - command:
> > >     > python2 test-bbdev.py
> > > -e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" -c
> > > validation -v turbo_dec_default.data
> > >   - Error:
> > >     > "Device 0 (baseband_turbo_sw) does not support specified
> > capabilities"
> > >
> > > which I think is due to an incorrect linkage of DPDK and FlexRAN. I
> > > have checked all the environmental variables pointing to the different
> > > components  and everything seems to be correct.
> > >
> > > Any suggestions about how to solve this problem?
> > >
> > > Thanks a lot for your help,
> > > Ginés.
> >
> >
>
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-users] SW Turbo Poll Mode Driver
  2021-10-13 15:30         ` Ginés García Avilés
@ 2021-10-19  9:02           ` Ginés García Avilés
  0 siblings, 0 replies; 7+ messages in thread
From: Ginés García Avilés @ 2021-10-19  9:02 UTC (permalink / raw)
  To: Chautru, Nicolas; +Cc: Thomas Monjalon, users

Hi again Nicolas,
Looking for a workaround trying to solve the previous issue,
I moved to Centos 7 (as suggested here 3. SW Turbo Poll Mode Driver — Data
Plane Development Kit 21.11.0-rc0 documentation (dpdk.org)
<https://doc.dpdk.org/guides/bbdevs/turbo_sw.html>)
and after having everything installed I found an *earlier issue*  when
compiling FlexRAN:

- FlexRAN-FEC-SDK-19-04/sdk/source/phy/lib_common/common_typedef_simd.hpp(43):
error: invalid redeclaration of type name "I16vec16" (declared at line 2528
of
"/opt/intel/oneapi/compiler/2021.4.0/linux/bin/intel64/../../compiler/include/dvec.h")

- FlexRAN-FEC-SDK-19-04/sdk/source/phy/lib_common/common_typedef_simd.hpp(153):
error: invalid redeclaration of type name "I32vec8" (declared at line 2259
of
"/opt/intel/oneapi/compiler/2021.4.0/linux/bin/intel64/../../compiler/include/dvec.h")

- FlexRAN-FEC-SDK-19-04/sdk/source/phy/lib_common/common_typedef_simd.hpp(191):
error: invalid redeclaration of type name "I8vec32" (declared at line 2872
of
"/opt/intel/oneapi/compiler/2021.4.0/linux/bin/intel64/../../compiler/include/dvec.h")

Versions:
  > icc (ICC) 2021.4.0 20210910
  > icpc (ICC) 2021.4.0 20210910
  > gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
  > g++ (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)

Steps:
  * Install Centos ICC dependencies
  * yum install intel-basekit intel-hpckit
  * . /opt/intel/oneapi/setvars.sh
 * cd <workspace>
  * ./FlexRAN-FEC-SDK19-04.sh
  * cd <workspace>/FlexRAN-FEC-SDK-19-04/sdk/
  * ./create-makefiles-linux.sh
  * cd build-avx512-icc
  * make

Am I missing something to compile flexRAN SDK?

Regards,
Ginés.




El mié, 13 oct 2021 a las 17:30, Ginés García Avilés (<
gines.garcia@i2cat.net>) escribió:

> Hi Nicolas,
> thanks a lot for your reply.
>
> I'm trying to build DPDK with ICC but I'm not sure why libstdc++ is not
> accessible for meson. As a workaround, I'm
> checking gcc in order to see whether the installation is correct or not
> (as far as I know icc takes some info from gcc).
>
> As an alternative, If I move to gcc as the compiler used by meson, I'm
> getting the following error for each operation provided by FlexRAN:
>
>   - "libldpc_encoder_5gnr.a(phy_ldpc_encoder_5gnr.cpp.o): relocation
> R_X86_64_32S against `.rodata.str1.32' can not be used when making a shared
> object; recompile with -fPIC"
>
> I have checked the fPIC flag and it is already included when compiling the
> turbo_sw driver.
>
>   - Versions:
>       > FlexRAN 19.04
>       > DPDK 21.08
>       > gcc Ubuntu 9.3.0
>       > Ubuntu 20.04
>
> Should I use gcc or icc for compiling dpdk? Any ideas about what could be
> the issue in the previous environments?
>
> Thanks a lot in advance,
> Ginés.
>
>
> El mar, 5 oct 2021 a las 22:57, Chautru, Nicolas (<
> nicolas.chautru@intel.com>) escribió:
>
>> Hi Gines,
>>
>> I don’t see such issue, you probably have to make sure libstdc++ is
>> installed and accessible by meson.
>>
>>
>>
>> *From:* Ginés García Avilés <gines.garcia@i2cat.net>
>> *Sent:* Tuesday, October 5, 2021 12:03 AM
>> *To:* Chautru, Nicolas <nicolas.chautru@intel.com>
>> *Cc:* Thomas Monjalon <thomas@monjalon.net>; users@dpdk.org
>> *Subject:* Re: [dpdk-users] SW Turbo Poll Mode Driver
>>
>>
>>
>> Hi Nicolas,
>>
>> thanks a lot for your help.
>>
>>
>>
>> However, with the latest version of DPDK I'm still facing the following
>> issue:
>>
>>   - "drivers/baseband/turbo_sw/meson.build:13:4: ERROR: C library
>> 'libstdc++' not found"
>>
>>
>>
>> These are the steps I'm actually following for the whole process:
>>
>>   - Set env vars (*ICC *compiler, FLEXRAN_SDK, DIR_WIRELESS_SDK, ...)
>>
>>   - meson x86_64-native-linux-icc
>>
>>   - cd x86_64-native-linux-icc
>>
>>   - meson configure -Dflexran_sdk=xxx/build-avx512-icc/install
>>
>>   - ninja
>>
>>
>>
>> Thanks in advance,
>>
>> Ginés.
>>
>>
>>
>> El lun, 4 oct 2021 a las 23:05, Chautru, Nicolas (<
>> nicolas.chautru@intel.com>) escribió:
>>
>> Hi Gines,
>> The only thing is to make sure to set the meson option to point to the
>> right location
>> See https://doc.dpdk.org/guides/bbdevs/turbo_sw.html : for instance
>> something like this "meson configure
>> -Dflexran_sdk=xxx/build-avx512-icc/install"
>> Then meson build framework will just link the libraries: see
>> drivers\baseband\turbo_sw\meson.build which uses cc.find_library to
>> dynamically find and link the libraries
>>
>> > -----Original Message-----
>> > From: Thomas Monjalon <thomas@monjalon.net>
>> > Sent: Wednesday, September 29, 2021 3:41 AM
>> > To: Ginés García Avilés <gines.garcia@i2cat.net>
>> > Cc: users@dpdk.org; Chautru, Nicolas <nicolas.chautru@intel.com>
>> > Subject: Re: [dpdk-users] SW Turbo Poll Mode Driver
>> >
>> > +Cc maintainer
>> >
>> > 14/09/2021 12:58, Ginés García Avilés:
>> > > Hi all,
>> > > After following the steps listed here (3. SW Turbo Poll Mode Driver —
>> > > Data Plane Development Kit 21.08.0 documentation (dpdk.org)
>> > > <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html#
>> <http://doc.dpdk.org/guides/bbdevs/turbo_sw.html>>), using the
>> > > specific versions of DPDK and FlexRAN, I'm facing an error while
>> > > trying to run one of the bbdev
>> > > tests:
>> > >   - command:
>> > >     > python2 test-bbdev.py
>> > > -e="--vdev=baseband_turbo_sw,socket_id=0,max_nb_queues=8" -c
>> > > validation -v turbo_dec_default.data
>> > >   - Error:
>> > >     > "Device 0 (baseband_turbo_sw) does not support specified
>> > capabilities"
>> > >
>> > > which I think is due to an incorrect linkage of DPDK and FlexRAN. I
>> > > have checked all the environmental variables pointing to the different
>> > > components  and everything seems to be correct.
>> > >
>> > > Any suggestions about how to solve this problem?
>> > >
>> > > Thanks a lot for your help,
>> > > Ginés.
>> >
>> >
>>
>>

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-10-19  9:02 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-14 10:58 [dpdk-users] SW Turbo Poll Mode Driver Ginés García Avilés
2021-09-29 10:41 ` Thomas Monjalon
2021-10-04 21:05   ` Chautru, Nicolas
2021-10-05  7:02     ` Ginés García Avilés
2021-10-05 20:56       ` Chautru, Nicolas
2021-10-13 15:30         ` Ginés García Avilés
2021-10-19  9:02           ` Ginés García Avilés

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git