* [dpdk-users] i40evf DPDK init_adminq failed: -53
@ 2016-01-29 20:34 Saurabh Mishra
2016-02-01 8:16 ` [dpdk-users] [dpdk-dev] " Qiu, Michael
0 siblings, 1 reply; 7+ messages in thread
From: Saurabh Mishra @ 2016-01-29 20:34 UTC (permalink / raw)
To: dev, users
Has anybody seen this before? What's the workaround or fix? We are using
dpdk-2.2.0 on KVM centos:
Host PF version: 1.0.11-k on Centos7
[root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4 --proc-type=primary -- -p
3 --num-procs=2 --proc-id=0
[.]
EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
EAL: Requesting 1024 pages of size 2MB from socket 0
EAL: TSC frequency is ~2600141 KHz
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable
clock cycles !
EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
EAL: PCI device 0000:00:04.0 on NUMA socket 0
EAL: probe driver: 8086:154c rte_i40evf_pmd
EAL: PCI memory mapped at 0x7ffff6200000
EAL: PCI memory mapped at 0x7ffff6210000
EAL: PCI device 0000:00:05.0 on NUMA socket 0
EAL: probe driver: 8086:154c rte_i40evf_pmd
EAL: PCI memory mapped at 0x7ffff6214000
EAL: PCI memory mapped at 0x7ffff6224000
PMD: i40evf_init_vf(): init_adminq failed: -53
PMD: i40evf_dev_init(): Init vf failed
EAL: Error - exiting with code: 1
Cause: Requested device 0000:00:05.0 cannot be used
[root@PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
Network devices using DPDK-compatible driver
============================================
0000:00:04.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
0000:00:05.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
Network devices using kernel driver
===================================
0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
unused=igb_uio,uio_pci_generic *Active*
Other network devices
=====================
<none>
[root@ ~]#
04:00.0 *Ether*net controller: Intel Corporation *Ether*net Controller X710
for 10GbE SFP+ (rev 01)
04:00.1 *Ether*net controller: Intel Corporation *Ether*net Controller X710
for 10GbE SFP+ (rev 01)
04:02.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
Function (rev 01)
04:02.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
Function (rev 01)
04:0a.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
Function (rev 01)
04:0a.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
Function (rev 01)
[root@oscompute3 ~]# dmesg | tail
[2064188.042835] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.062836] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.082862] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.102838] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.122850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.142852] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.162850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.182845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.202845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[2064188.222858] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
pending
[root@oscompute3 ~]#
/Saurabh
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [dpdk-dev] i40evf DPDK init_adminq failed: -53
2016-01-29 20:34 [dpdk-users] i40evf DPDK init_adminq failed: -53 Saurabh Mishra
@ 2016-02-01 8:16 ` Qiu, Michael
2016-02-01 18:25 ` Saurabh Mishra
0 siblings, 1 reply; 7+ messages in thread
From: Qiu, Michael @ 2016-02-01 8:16 UTC (permalink / raw)
To: Saurabh Mishra, dev, users, Zhang, Helin, Xu, Qian Q
Hi, Saurabh
It's known issue, to fix this you'd better to upgrade the firmware
version of i40e.
BTW, will it work in guest with kernel driver?
If yes, to workaround(somebody reports it does not work for them):
Remove i40e.ko in guest, so that it will not auto-loaded when boot up.
Hope it works for you.
Thanks,
Michael
On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
> Has anybody seen this before? What's the workaround or fix? We are using
> dpdk-2.2.0 on KVM centos:
>
> Host PF version: 1.0.11-k on Centos7
>
>
> [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4 --proc-type=primary -- -p
> 3 --num-procs=2 --proc-id=0
>
> [.]
>
> EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
>
> EAL: Requesting 1024 pages of size 2MB from socket 0
>
> EAL: TSC frequency is ~2600141 KHz
>
> EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable
> clock cycles !
>
> EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
>
> EAL: PCI device 0000:00:04.0 on NUMA socket 0
>
> EAL: probe driver: 8086:154c rte_i40evf_pmd
>
> EAL: PCI memory mapped at 0x7ffff6200000
>
> EAL: PCI memory mapped at 0x7ffff6210000
>
> EAL: PCI device 0000:00:05.0 on NUMA socket 0
>
> EAL: probe driver: 8086:154c rte_i40evf_pmd
>
> EAL: PCI memory mapped at 0x7ffff6214000
>
> EAL: PCI memory mapped at 0x7ffff6224000
>
> PMD: i40evf_init_vf(): init_adminq failed: -53
>
> PMD: i40evf_dev_init(): Init vf failed
>
> EAL: Error - exiting with code: 1
>
> Cause: Requested device 0000:00:05.0 cannot be used
>
> [root@PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
>
>
> Network devices using DPDK-compatible driver
>
> ============================================
>
> 0000:00:04.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>
> 0000:00:05.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>
>
> Network devices using kernel driver
>
> ===================================
>
> 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
> unused=igb_uio,uio_pci_generic *Active*
>
>
> Other network devices
>
> =====================
>
> <none>
>
> [root@ ~]#
>
>
>
> 04:00.0 *Ether*net controller: Intel Corporation *Ether*net Controller X710
> for 10GbE SFP+ (rev 01)
>
> 04:00.1 *Ether*net controller: Intel Corporation *Ether*net Controller X710
> for 10GbE SFP+ (rev 01)
>
> 04:02.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
> 04:02.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
> 04:0a.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
> 04:0a.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
>
>
> [root@oscompute3 ~]# dmesg | tail
>
> [2064188.042835] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.062836] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.082862] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.102838] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.122850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.142852] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.162850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.182845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.202845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.222858] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [root@oscompute3 ~]#
>
>
> /Saurabh
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [dpdk-dev] i40evf DPDK init_adminq failed: -53
2016-02-01 8:16 ` [dpdk-users] [dpdk-dev] " Qiu, Michael
@ 2016-02-01 18:25 ` Saurabh Mishra
2016-02-01 19:49 ` Saurabh Mishra
2016-02-02 2:36 ` Zhang, Helin
0 siblings, 2 replies; 7+ messages in thread
From: Saurabh Mishra @ 2016-02-01 18:25 UTC (permalink / raw)
To: Qiu, Michael; +Cc: dev, Zhang, Helin, users
Hi Michael --
What are the steps to upgrade i40e firmware. We are using CentOS7
It didn't work with guest VF driver either on ESXi and KVM.
Sure. I will blacklist i40evf driver and try it out.
Thanks,
/Saurabh
On Mon, Feb 1, 2016 at 12:16 AM, Qiu, Michael <michael.qiu@intel.com> wrote:
> Hi, Saurabh
>
> It's known issue, to fix this you'd better to upgrade the firmware
> version of i40e.
>
> BTW, will it work in guest with kernel driver?
>
> If yes, to workaround(somebody reports it does not work for them):
> Remove i40e.ko in guest, so that it will not auto-loaded when boot up.
>
> Hope it works for you.
>
> Thanks,
> Michael
>
>
> On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
> > Has anybody seen this before? What's the workaround or fix? We are using
> > dpdk-2.2.0 on KVM centos:
> >
> > Host PF version: 1.0.11-k on Centos7
> >
> >
> > [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4 --proc-type=primary
> -- -p
> > 3 --num-procs=2 --proc-id=0
> >
> > [.]
> >
> > EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
> >
> > EAL: Requesting 1024 pages of size 2MB from socket 0
> >
> > EAL: TSC frequency is ~2600141 KHz
> >
> > EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
> unreliable
> > clock cycles !
> >
> > EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
> >
> > EAL: PCI device 0000:00:04.0 on NUMA socket 0
> >
> > EAL: probe driver: 8086:154c rte_i40evf_pmd
> >
> > EAL: PCI memory mapped at 0x7ffff6200000
> >
> > EAL: PCI memory mapped at 0x7ffff6210000
> >
> > EAL: PCI device 0000:00:05.0 on NUMA socket 0
> >
> > EAL: probe driver: 8086:154c rte_i40evf_pmd
> >
> > EAL: PCI memory mapped at 0x7ffff6214000
> >
> > EAL: PCI memory mapped at 0x7ffff6224000
> >
> > PMD: i40evf_init_vf(): init_adminq failed: -53
> >
> > PMD: i40evf_dev_init(): Init vf failed
> >
> > EAL: Error - exiting with code: 1
> >
> > Cause: Requested device 0000:00:05.0 cannot be used
> >
> > [root@PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
> >
> >
> > Network devices using DPDK-compatible driver
> >
> > ============================================
> >
> > 0000:00:04.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
> >
> > 0000:00:05.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
> >
> >
> > Network devices using kernel driver
> >
> > ===================================
> >
> > 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
> > unused=igb_uio,uio_pci_generic *Active*
> >
> >
> > Other network devices
> >
> > =====================
> >
> > <none>
> >
> > [root@ ~]#
> >
> >
> >
> > 04:00.0 *Ether*net controller: Intel Corporation *Ether*net Controller
> X710
> > for 10GbE SFP+ (rev 01)
> >
> > 04:00.1 *Ether*net controller: Intel Corporation *Ether*net Controller
> X710
> > for 10GbE SFP+ (rev 01)
> >
> > 04:02.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:02.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:0a.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:0a.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> > Function (rev 01)
> >
> >
> >
> > [root@oscompute3 ~]# dmesg | tail
> >
> > [2064188.042835] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.062836] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.082862] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.102838] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.122850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.142852] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.162850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.182845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.202845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.222858] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> > pending
> >
> > [root@oscompute3 ~]#
> >
> >
> > /Saurabh
> >
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [dpdk-dev] i40evf DPDK init_adminq failed: -53
2016-02-01 18:25 ` Saurabh Mishra
@ 2016-02-01 19:49 ` Saurabh Mishra
2016-02-01 22:44 ` Saurabh Mishra
2016-02-02 2:36 ` Zhang, Helin
1 sibling, 1 reply; 7+ messages in thread
From: Saurabh Mishra @ 2016-02-01 19:49 UTC (permalink / raw)
To: Qiu, Michael; +Cc: dev, Zhang, Helin, users
Hi,
So I tried to update the firmware and it says "Update not available" for
i40e
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.25.20.03
Copyright (C) 2013 - 2015 Intel Corporation.
WARNING: TO AVOID DAMAGE TO YOUR DEVICE, DO NOT EXIT OR REBOOT OR POWER OFF
THE SYSTEM DURING THIS UPDATE
Inventory in progress. Please wait [|.........]
+
Num Description Device-Id B:D Adapter Status
=== ====================================== ========= =====
====================
01) Intel(R) Ethernet Server Adapter X520- 8086-10FB 130:00 Update not
available
02) Intel(R) Ethernet Converged Network Ad 8086-1572 07:00 Update not
available
Tool execution completed with the following status: All operations
completed successfully
Press any key to exit.
[root] esxcfg-nics -l
Name PCI Driver Link Speed Duplex MAC Address
MTU Description
vmnic6 0000:07:00.0 i40e Up 10000Mbps Full 3c:fd:fe:04:11:c0
1500 Intel Corporation Ethernet Controller X710 for 10GbE SFP+
vmnic7 0000:07:00.1 i40e Up 10000Mbps Full 3c:fd:fe:04:11:c2
1500 Intel Corporation Ethernet Controller X710 for 10GbE SFP+
vmnic8 0000:82:00.0 ixgbe Up 10000Mbps Full 00:1b:21:90:f9:f8
1500 Intel(R) 82599 10 Gigabit Dual Port Network Connection
[root] ethtool -i vmnic6
driver: i40e
version: 1.3.38
firmware-version: 4.41 0x80001866 16.5.20
bus-info: 0000:07:00.0
On Mon, Feb 1, 2016 at 10:25 AM, Saurabh Mishra <saurabh.globe@gmail.com>
wrote:
> Hi Michael --
>
> What are the steps to upgrade i40e firmware. We are using CentOS7
>
> It didn't work with guest VF driver either on ESXi and KVM.
>
> Sure. I will blacklist i40evf driver and try it out.
>
> Thanks,
> /Saurabh
>
>
> On Mon, Feb 1, 2016 at 12:16 AM, Qiu, Michael <michael.qiu@intel.com>
> wrote:
>
>> Hi, Saurabh
>>
>> It's known issue, to fix this you'd better to upgrade the firmware
>> version of i40e.
>>
>> BTW, will it work in guest with kernel driver?
>>
>> If yes, to workaround(somebody reports it does not work for them):
>> Remove i40e.ko in guest, so that it will not auto-loaded when boot up.
>>
>> Hope it works for you.
>>
>> Thanks,
>> Michael
>>
>>
>> On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
>> > Has anybody seen this before? What's the workaround or fix? We are using
>> > dpdk-2.2.0 on KVM centos:
>> >
>> > Host PF version: 1.0.11-k on Centos7
>> >
>> >
>> > [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4 --proc-type=primary
>> -- -p
>> > 3 --num-procs=2 --proc-id=0
>> >
>> > [.]
>> >
>> > EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
>> >
>> > EAL: Requesting 1024 pages of size 2MB from socket 0
>> >
>> > EAL: TSC frequency is ~2600141 KHz
>> >
>> > EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
>> unreliable
>> > clock cycles !
>> >
>> > EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
>> >
>> > EAL: PCI device 0000:00:04.0 on NUMA socket 0
>> >
>> > EAL: probe driver: 8086:154c rte_i40evf_pmd
>> >
>> > EAL: PCI memory mapped at 0x7ffff6200000
>> >
>> > EAL: PCI memory mapped at 0x7ffff6210000
>> >
>> > EAL: PCI device 0000:00:05.0 on NUMA socket 0
>> >
>> > EAL: probe driver: 8086:154c rte_i40evf_pmd
>> >
>> > EAL: PCI memory mapped at 0x7ffff6214000
>> >
>> > EAL: PCI memory mapped at 0x7ffff6224000
>> >
>> > PMD: i40evf_init_vf(): init_adminq failed: -53
>> >
>> > PMD: i40evf_dev_init(): Init vf failed
>> >
>> > EAL: Error - exiting with code: 1
>> >
>> > Cause: Requested device 0000:00:05.0 cannot be used
>> >
>> > [root@PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
>> >
>> >
>> > Network devices using DPDK-compatible driver
>> >
>> > ============================================
>> >
>> > 0000:00:04.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>> >
>> > 0000:00:05.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>> >
>> >
>> > Network devices using kernel driver
>> >
>> > ===================================
>> >
>> > 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
>> > unused=igb_uio,uio_pci_generic *Active*
>> >
>> >
>> > Other network devices
>> >
>> > =====================
>> >
>> > <none>
>> >
>> > [root@ ~]#
>> >
>> >
>> >
>> > 04:00.0 *Ether*net controller: Intel Corporation *Ether*net Controller
>> X710
>> > for 10GbE SFP+ (rev 01)
>> >
>> > 04:00.1 *Ether*net controller: Intel Corporation *Ether*net Controller
>> X710
>> > for 10GbE SFP+ (rev 01)
>> >
>> > 04:02.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>> > Function (rev 01)
>> >
>> > 04:02.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>> > Function (rev 01)
>> >
>> > 04:0a.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>> > Function (rev 01)
>> >
>> > 04:0a.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>> > Function (rev 01)
>> >
>> >
>> >
>> > [root@oscompute3 ~]# dmesg | tail
>> >
>> > [2064188.042835] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.062836] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.082862] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.102838] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.122850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.142852] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.162850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.182845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.202845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [2064188.222858] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
>> > pending
>> >
>> > [root@oscompute3 ~]#
>> >
>> >
>> > /Saurabh
>> >
>>
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [dpdk-dev] i40evf DPDK init_adminq failed: -53
2016-02-01 19:49 ` Saurabh Mishra
@ 2016-02-01 22:44 ` Saurabh Mishra
2016-02-02 3:00 ` Qiu, Michael
0 siblings, 1 reply; 7+ messages in thread
From: Saurabh Mishra @ 2016-02-01 22:44 UTC (permalink / raw)
To: Qiu, Michael; +Cc: dev, Zhang, Helin, users
Hi, on KVM system, after doing NVM upgrade to new firmware and I don't
see init_adminq
failed messages.
Thanks,
/Saurabh
On Mon, Feb 1, 2016 at 11:49 AM, Saurabh Mishra <saurabh.globe@gmail.com>
wrote:
> Hi,
>
> So I tried to update the firmware and it says "Update not available" for
> i40e
>
> Intel(R) Ethernet NVM Update Tool
>
> NVMUpdate version 1.25.20.03
>
> Copyright (C) 2013 - 2015 Intel Corporation.
>
>
>
> WARNING: TO AVOID DAMAGE TO YOUR DEVICE, DO NOT EXIT OR REBOOT OR POWER
> OFF THE SYSTEM DURING THIS UPDATE
>
> Inventory in progress. Please wait [|.........]
>
> +
>
>
>
> Num Description Device-Id B:D Adapter Status
>
> === ====================================== ========= =====
> ====================
>
> 01) Intel(R) Ethernet Server Adapter X520- 8086-10FB 130:00 Update not
> available
>
> 02) Intel(R) Ethernet Converged Network Ad 8086-1572 07:00 Update not
> available
>
>
>
> Tool execution completed with the following status: All operations
> completed successfully
>
> Press any key to exit.
>
>
> [root] esxcfg-nics -l
>
> Name PCI Driver Link Speed Duplex MAC Address
> MTU Description
>
> vmnic6 0000:07:00.0 i40e Up 10000Mbps Full 3c:fd:fe:04:11:c0
> 1500 Intel Corporation Ethernet Controller X710 for 10GbE SFP+
>
> vmnic7 0000:07:00.1 i40e Up 10000Mbps Full 3c:fd:fe:04:11:c2
> 1500 Intel Corporation Ethernet Controller X710 for 10GbE SFP+
>
> vmnic8 0000:82:00.0 ixgbe Up 10000Mbps Full 00:1b:21:90:f9:f8
> 1500 Intel(R) 82599 10 Gigabit Dual Port Network Connection
>
> [root] ethtool -i vmnic6
>
> driver: i40e
>
> version: 1.3.38
>
> firmware-version: 4.41 0x80001866 16.5.20
>
> bus-info: 0000:07:00.0
>
> On Mon, Feb 1, 2016 at 10:25 AM, Saurabh Mishra <saurabh.globe@gmail.com>
> wrote:
>
>> Hi Michael --
>>
>> What are the steps to upgrade i40e firmware. We are using CentOS7
>>
>> It didn't work with guest VF driver either on ESXi and KVM.
>>
>> Sure. I will blacklist i40evf driver and try it out.
>>
>> Thanks,
>> /Saurabh
>>
>>
>> On Mon, Feb 1, 2016 at 12:16 AM, Qiu, Michael <michael.qiu@intel.com>
>> wrote:
>>
>>> Hi, Saurabh
>>>
>>> It's known issue, to fix this you'd better to upgrade the firmware
>>> version of i40e.
>>>
>>> BTW, will it work in guest with kernel driver?
>>>
>>> If yes, to workaround(somebody reports it does not work for them):
>>> Remove i40e.ko in guest, so that it will not auto-loaded when boot up.
>>>
>>> Hope it works for you.
>>>
>>> Thanks,
>>> Michael
>>>
>>>
>>> On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
>>> > Has anybody seen this before? What's the workaround or fix? We are
>>> using
>>> > dpdk-2.2.0 on KVM centos:
>>> >
>>> > Host PF version: 1.0.11-k on Centos7
>>> >
>>> >
>>> > [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4 --proc-type=primary
>>> -- -p
>>> > 3 --num-procs=2 --proc-id=0
>>> >
>>> > [.]
>>> >
>>> > EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
>>> >
>>> > EAL: Requesting 1024 pages of size 2MB from socket 0
>>> >
>>> > EAL: TSC frequency is ~2600141 KHz
>>> >
>>> > EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
>>> unreliable
>>> > clock cycles !
>>> >
>>> > EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
>>> >
>>> > EAL: PCI device 0000:00:04.0 on NUMA socket 0
>>> >
>>> > EAL: probe driver: 8086:154c rte_i40evf_pmd
>>> >
>>> > EAL: PCI memory mapped at 0x7ffff6200000
>>> >
>>> > EAL: PCI memory mapped at 0x7ffff6210000
>>> >
>>> > EAL: PCI device 0000:00:05.0 on NUMA socket 0
>>> >
>>> > EAL: probe driver: 8086:154c rte_i40evf_pmd
>>> >
>>> > EAL: PCI memory mapped at 0x7ffff6214000
>>> >
>>> > EAL: PCI memory mapped at 0x7ffff6224000
>>> >
>>> > PMD: i40evf_init_vf(): init_adminq failed: -53
>>> >
>>> > PMD: i40evf_dev_init(): Init vf failed
>>> >
>>> > EAL: Error - exiting with code: 1
>>> >
>>> > Cause: Requested device 0000:00:05.0 cannot be used
>>> >
>>> > [root@PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
>>> >
>>> >
>>> > Network devices using DPDK-compatible driver
>>> >
>>> > ============================================
>>> >
>>> > 0000:00:04.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>>> >
>>> > 0000:00:05.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>>> >
>>> >
>>> > Network devices using kernel driver
>>> >
>>> > ===================================
>>> >
>>> > 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
>>> > unused=igb_uio,uio_pci_generic *Active*
>>> >
>>> >
>>> > Other network devices
>>> >
>>> > =====================
>>> >
>>> > <none>
>>> >
>>> > [root@ ~]#
>>> >
>>> >
>>> >
>>> > 04:00.0 *Ether*net controller: Intel Corporation *Ether*net Controller
>>> X710
>>> > for 10GbE SFP+ (rev 01)
>>> >
>>> > 04:00.1 *Ether*net controller: Intel Corporation *Ether*net Controller
>>> X710
>>> > for 10GbE SFP+ (rev 01)
>>> >
>>> > 04:02.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> > 04:02.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> > 04:0a.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> > 04:0a.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> >
>>> >
>>> > [root@oscompute3 ~]# dmesg | tail
>>> >
>>> > [2064188.042835] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.062836] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.082862] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.102838] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.122850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.142852] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.162850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.182845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.202845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.222858] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [root@oscompute3 ~]#
>>> >
>>> >
>>> > /Saurabh
>>> >
>>>
>>>
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [dpdk-dev] i40evf DPDK init_adminq failed: -53
2016-02-01 18:25 ` Saurabh Mishra
2016-02-01 19:49 ` Saurabh Mishra
@ 2016-02-02 2:36 ` Zhang, Helin
1 sibling, 0 replies; 7+ messages in thread
From: Zhang, Helin @ 2016-02-02 2:36 UTC (permalink / raw)
To: Saurabh Mishra, Qiu, Michael; +Cc: dev, users
Hi Saurabh
XL710/X710 firmware update tool/images can be found on www.intel.com, that’s the formal way.
Please try there first.
Regards,
Helin
From: Saurabh Mishra [mailto:saurabh.globe@gmail.com]
Sent: Tuesday, February 2, 2016 2:25 AM
To: Qiu, Michael
Cc: dev@dpdk.org; users@dpdk.org; Zhang, Helin; Xu, Qian Q
Subject: Re: [dpdk-dev] i40evf DPDK init_adminq failed: -53
Hi Michael --
What are the steps to upgrade i40e firmware. We are using CentOS7
It didn't work with guest VF driver either on ESXi and KVM.
Sure. I will blacklist i40evf driver and try it out.
Thanks,
/Saurabh
On Mon, Feb 1, 2016 at 12:16 AM, Qiu, Michael <michael.qiu@intel.com<mailto:michael.qiu@intel.com>> wrote:
Hi, Saurabh
It's known issue, to fix this you'd better to upgrade the firmware
version of i40e.
BTW, will it work in guest with kernel driver?
If yes, to workaround(somebody reports it does not work for them):
Remove i40e.ko in guest, so that it will not auto-loaded when boot up.
Hope it works for you.
Thanks,
Michael
On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
> Has anybody seen this before? What's the workaround or fix? We are using
> dpdk-2.2.0 on KVM centos:
>
> Host PF version: 1.0.11-k on Centos7
>
>
> [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4 --proc-type=primary -- -p
> 3 --num-procs=2 --proc-id=0
>
> [.]
>
> EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
>
> EAL: Requesting 1024 pages of size 2MB from socket 0
>
> EAL: TSC frequency is ~2600141 KHz
>
> EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable
> clock cycles !
>
> EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
>
> EAL: PCI device 0000:00:04.0 on NUMA socket 0
>
> EAL: probe driver: 8086:154c rte_i40evf_pmd
>
> EAL: PCI memory mapped at 0x7ffff6200000
>
> EAL: PCI memory mapped at 0x7ffff6210000
>
> EAL: PCI device 0000:00:05.0 on NUMA socket 0
>
> EAL: probe driver: 8086:154c rte_i40evf_pmd
>
> EAL: PCI memory mapped at 0x7ffff6214000
>
> EAL: PCI memory mapped at 0x7ffff6224000
>
> PMD: i40evf_init_vf(): init_adminq failed: -53
>
> PMD: i40evf_dev_init(): Init vf failed
>
> EAL: Error - exiting with code: 1
>
> Cause: Requested device 0000:00:05.0 cannot be used
>
> [root@PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
>
>
> Network devices using DPDK-compatible driver
>
> ============================================
>
> 0000:00:04.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>
> 0000:00:05.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>
>
> Network devices using kernel driver
>
> ===================================
>
> 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
> unused=igb_uio,uio_pci_generic *Active*
>
>
> Other network devices
>
> =====================
>
> <none>
>
> [root@ ~]#
>
>
>
> 04:00.0 *Ether*net controller: Intel Corporation *Ether*net Controller X710
> for 10GbE SFP+ (rev 01)
>
> 04:00.1 *Ether*net controller: Intel Corporation *Ether*net Controller X710
> for 10GbE SFP+ (rev 01)
>
> 04:02.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
> 04:02.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
> 04:0a.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
> 04:0a.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
> Function (rev 01)
>
>
>
> [root@oscompute3 ~]# dmesg | tail
>
> [2064188.042835] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.062836] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.082862] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.102838] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.122850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.142852] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.162850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.182845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.202845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [2064188.222858] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command 15
> pending
>
> [root@oscompute3 ~]#
>
>
> /Saurabh
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [dpdk-dev] i40evf DPDK init_adminq failed: -53
2016-02-01 22:44 ` Saurabh Mishra
@ 2016-02-02 3:00 ` Qiu, Michael
0 siblings, 0 replies; 7+ messages in thread
From: Qiu, Michael @ 2016-02-02 3:00 UTC (permalink / raw)
To: Saurabh Mishra; +Cc: dev, Zhang, Helin, users
On 2/2/2016 6:44 AM, Saurabh Mishra wrote:
> Hi, on KVM system, after doing NVM upgrade to new firmware and I don't
> see init_adminq failed messages.
>
Glade to see you have fix the issue:)
Thanks,
Michael
> Thanks,
> /Saurabh
>
> On Mon, Feb 1, 2016 at 11:49 AM, Saurabh Mishra
> <saurabh.globe@gmail.com <mailto:saurabh.globe@gmail.com>> wrote:
>
> Hi,
>
> So I tried to update the firmware and it says "Update not
> available" for i40e
>
> Intel(R) Ethernet NVM Update Tool
>
> NVMUpdate version 1.25.20.03
>
> Copyright (C) 2013 - 2015 Intel Corporation.
>
>
>
> WARNING: TO AVOID DAMAGE TO YOUR DEVICE, DO NOT EXIT OR REBOOT OR
> POWER OFF THE SYSTEM DURING THIS UPDATE
>
> Inventory in progress. Please wait [|.........]
>
> +
>
>
>
> Num Description Device-Id B:D Adapter
> Status
>
> === ====================================== ========= =====
> ====================
>
> 01) Intel(R) Ethernet Server Adapter X520- 8086-10FB 130:00 Update
> not available
>
> 02) Intel(R) Ethernet Converged Network Ad 8086-1572 07:00 Update
> not available
>
>
>
> Tool execution completed with the following status: All operations
> completed successfully
>
> Press any key to exit.
>
>
> [root] esxcfg-nics -l
>
> Name PCI Driver Link Speed Duplex MAC Address
> MTU Description
>
> vmnic6 0000:07:00.0 i40e Up 10000Mbps Full
> 3c:fd:fe:04:11:c0 1500 Intel Corporation Ethernet Controller
> X710 for 10GbE SFP+
>
> vmnic7 0000:07:00.1 i40e Up 10000Mbps Full
> 3c:fd:fe:04:11:c2 1500 Intel Corporation Ethernet Controller
> X710 for 10GbE SFP+
>
> vmnic8 0000:82:00.0 ixgbe Up 10000Mbps Full
> 00:1b:21:90:f9:f8 1500 Intel(R) 82599 10 Gigabit Dual Port
> Network Connection
>
> [root] ethtool -i vmnic6
>
> driver: i40e
>
> version: 1.3.38
>
> firmware-version: 4.41 0x80001866 16.5.20
>
> bus-info: 0000:07:00.0
>
>
> On Mon, Feb 1, 2016 at 10:25 AM, Saurabh Mishra
> <saurabh.globe@gmail.com <mailto:saurabh.globe@gmail.com>> wrote:
>
> Hi Michael --
>
> What are the steps to upgrade i40e firmware. We are using CentOS7
>
> It didn't work with guest VF driver either on ESXi and KVM.
>
> Sure. I will blacklist i40evf driver and try it out.
>
> Thanks,
> /Saurabh
>
>
> On Mon, Feb 1, 2016 at 12:16 AM, Qiu, Michael
> <michael.qiu@intel.com <mailto:michael.qiu@intel.com>> wrote:
>
> Hi, Saurabh
>
> It's known issue, to fix this you'd better to upgrade the
> firmware
> version of i40e.
>
> BTW, will it work in guest with kernel driver?
>
> If yes, to workaround(somebody reports it does not work
> for them):
> Remove i40e.ko in guest, so that it will not auto-loaded
> when boot up.
>
> Hope it works for you.
>
> Thanks,
> Michael
>
>
> On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
> > Has anybody seen this before? What's the workaround or
> fix? We are using
> > dpdk-2.2.0 on KVM centos:
> >
> > Host PF version: 1.0.11-k on Centos7
> >
> >
> > [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4
> --proc-type=primary -- -p
> > 3 --num-procs=2 --proc-id=0
> >
> > [.]
> >
> > EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
> >
> > EAL: Requesting 1024 pages of size 2MB from socket 0
> >
> > EAL: TSC frequency is ~2600141 KHz
> >
> > EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no
> -> using unreliable
> > clock cycles !
> >
> > EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
> >
> > EAL: PCI device 0000:00:04.0 on NUMA socket 0
> >
> > EAL: probe driver: 8086:154c rte_i40evf_pmd
> >
> > EAL: PCI memory mapped at 0x7ffff6200000
> >
> > EAL: PCI memory mapped at 0x7ffff6210000
> >
> > EAL: PCI device 0000:00:05.0 on NUMA socket 0
> >
> > EAL: probe driver: 8086:154c rte_i40evf_pmd
> >
> > EAL: PCI memory mapped at 0x7ffff6214000
> >
> > EAL: PCI memory mapped at 0x7ffff6224000
> >
> > PMD: i40evf_init_vf(): init_adminq failed: -53
> >
> > PMD: i40evf_dev_init(): Init vf failed
> >
> > EAL: Error - exiting with code: 1
> >
> > Cause: Requested device 0000:00:05.0 cannot be used
> >
> > [root@PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
> >
> >
> > Network devices using DPDK-compatible driver
> >
> > ============================================
> >
> > 0000:00:04.0 'Device 154c' drv=igb_uio
> unused=uio_pci_generic
> >
> > 0000:00:05.0 'Device 154c' drv=igb_uio
> unused=uio_pci_generic
> >
> >
> > Network devices using kernel driver
> >
> > ===================================
> >
> > 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
> > unused=igb_uio,uio_pci_generic *Active*
> >
> >
> > Other network devices
> >
> > =====================
> >
> > <none>
> >
> > [root@ ~]#
> >
> >
> >
> > 04:00.0 *Ether*net controller: Intel Corporation
> *Ether*net Controller X710
> > for 10GbE SFP+ (rev 01)
> >
> > 04:00.1 *Ether*net controller: Intel Corporation
> *Ether*net Controller X710
> > for 10GbE SFP+ (rev 01)
> >
> > 04:02.0 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:02.1 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:0a.0 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> > 04:0a.1 *Ether*net controller: Intel Corporation
> XL710/X710 Virtual
> > Function (rev 01)
> >
> >
> >
> > [root@oscompute3 ~]# dmesg | tail
> >
> > [2064188.042835] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.062836] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.082862] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.102838] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.122850] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.142852] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.162850] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.182845] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.202845] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [2064188.222858] i40evf 0000:04:0a.1:
> i40evf_add_ether_addrs: command 15
> > pending
> >
> > [root@oscompute3 ~]#
> >
> >
> > /Saurabh
> >
>
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-02-02 3:01 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-29 20:34 [dpdk-users] i40evf DPDK init_adminq failed: -53 Saurabh Mishra
2016-02-01 8:16 ` [dpdk-users] [dpdk-dev] " Qiu, Michael
2016-02-01 18:25 ` Saurabh Mishra
2016-02-01 19:49 ` Saurabh Mishra
2016-02-01 22:44 ` Saurabh Mishra
2016-02-02 3:00 ` Qiu, Michael
2016-02-02 2:36 ` Zhang, Helin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).