DPDK usage discussions
 help / color / mirror / Atom feed
* dpdk-pktgen: jumbo frames on AWS EC2
@ 2021-11-02 16:45 Knight, Joshua
  0 siblings, 0 replies; only message in thread
From: Knight, Joshua @ 2021-11-02 16:45 UTC (permalink / raw)
  To: users

[-- Attachment #1: Type: text/plain, Size: 2358 bytes --]

I’m attempting to run pktgen on an AWS EC2 instance with jumbo frames. When I use the -j option to enable jumbo frames, it attempts to setup a max_rx_pkt_len size of 9618 which causes it to crash. It’s reporting the max valid value is 9216.

Is there a way to override it to set 9216 instead at runtime? Or would I need to modify and recompile pktgen/dpdk?

Looking at another interface using the kernel driver, the max mtu reported is 9216 so I’m also not sure where the 9618 comes from or why it’s being used instead of 9216. Perhaps I’m misunderstanding what should work out-of-the-box and what needs to be tweaked during compilation time.

I’m using pktgen 21.05.0 and dpdk 21.08.


Copyright(c) <2010-2021>, Intel Corporation. All rights reserved. Powered by DPDK
EAL: Detected 72 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Detected shared linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available 1048576 kB hugepages reported
EAL: VFIO support initialized
EAL: Device 0000:00:05.0 is not NUMA-aware, defaulting socket to 0
EAL: Device 0000:00:06.0 is not NUMA-aware, defaulting socket to 0
EAL: Probe PCI driver: net_ena (1d0f:ec20) device: 0000:00:06.0 (socket 0)
EAL: Device 0000:00:07.0 is not NUMA-aware, defaulting socket to 0
TELEMETRY: No legacy callbacks, legacy socket not created
**** Jumbo Frames of 9618 enabled.

*** Copyright(c) <2010-2021>, Intel Corporation. All rights reserved.
*** Pktgen  created by: Keith Wiles -- >>> Powered by DPDK <<<

Port: Name         IfIndex Alias        NUMA  PCI
    0: net_ena         0                   0   1d0f:ec20/00:06.0

Initialize Port 0 -- TxQ 6, RxQ 1
Ethdev port_id=0 max_rx_pkt_len 9618 > max valid value 9216
!PANIC!: Cannot configure device: port=0, Num queues 1,6 (22)Invalid argument
PANIC in pktgen_config_ports():
Cannot configure device: port=0, Num queues 1,6 (22)Invalid argument
6: [pktgen(+0xa8de) [0x55d0401ef8de]]
5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x7ffb0b4ab0b3]]
4: [pktgen(+0xa454) [0x55d0401ef454]]
3: [pktgen(+0x31a2e) [0x55d040216a2e]]
2: [/usr/local/lib/x86_64-linux-gnu/librte_eal.so.21(__rte_panic+0xcd) [0x7ffb0b869e9f]]
1: [/usr/local/lib/x86_64-linux-gnu/librte_eal.so.21(rte_dump_stack+0x32) [0x7ffb0b88f602]]
Aborted

Thanks,
Josh



[-- Attachment #2: Type: text/html, Size: 9334 bytes --]

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2021-11-02 16:45 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-02 16:45 dpdk-pktgen: jumbo frames on AWS EC2 Knight, Joshua

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git