From: Shreyansh Jain <shreyansh.jain@nxp.com>
To: <dev@dpdk.org>
Cc: <thomas.monjalon@6wind.com>, <david.marchand@6wind.com>,
Shreyansh Jain <shreyansh.jain@nxp.com>
Subject: [dpdk-dev] [PATCH 02/13] eal/bus: introduce bus abstraction
Date: Sun, 4 Dec 2016 15:41:17 +0530 [thread overview]
Message-ID: <1480846288-2517-3-git-send-email-shreyansh.jain@nxp.com> (raw)
In-Reply-To: <1480846288-2517-1-git-send-email-shreyansh.jain@nxp.com>
This patch introduces the rte_bus abstraction for devices and drivers in
EAL framework. The model is:
- One or more buses are connected to a CPU (or core)
- One or more devices are conneted to a Bus
- Drivers are running instances which manage one or more devices
- Bus is responsible for identifying devices (and interrupt propogation)
- Driver is responsible for initializing the device
This patch adds a 'rte_bus' class which rte_driver and rte_device refer.
This way, each device (rte_xxx_device) would have reference to the bus
it is based on. As well as, each driver (rte_xxx_driver) would have link
to the bus and devices on it for servicing.
__ rte_bus_list
/
+----------'---+
|rte_bus |
| driver_list------> List of rte_bus specific
| device_list---- devices
| | `-> List of rte_bus associated
| | drivers
+--|------|----+
_________/ \_________
+--------/----+ +-\---------------+
|rte_device | |rte_driver |
| rte_bus | | rte_bus |
| rte_driver | | ... |
| ... | +---------...-----+
| | |||
+---||--------+ |||
|| |||
| \ \\\
| \_____________ \\\
| \ |||
+------|---------+ +----|----------+ |||
|rte_pci_device | |rte_xxx_device | |||
| .... | | .... | |||
+----------------+ +---------------+ / | \
/ | \
_____________________/ / \
/ ___/ \
+-------------'--+ +------------'---+ +--'------------+
|rte_pci_driver | |rte_vdev_driver | |rte_xxx_driver |
| .... | | .... | | .... |
+----------------+ +----------------+ +---------------+
This patch only enables the bus references on rte_driver and rte_driver.
EAL wide global device and driver list continue to exist until an instance
of bus is added in subsequent patches.
This patch also introduces RTE_REGISTER_BUS macro on the lines of
RTE_PMD_REGISTER_XXX. Key difference is that the constructor priority has
been explicitly set to 101 so as to execute bus registration before PMD.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
lib/librte_eal/bsdapp/eal/rte_eal_version.map | 15 ++
lib/librte_eal/common/Makefile | 2 +-
lib/librte_eal/common/eal_common_bus.c | 192 ++++++++++++++++++++++++
lib/librte_eal/common/include/rte_bus.h | 174 +++++++++++++++++++++
lib/librte_eal/common/include/rte_dev.h | 2 +
lib/librte_eal/linuxapp/eal/Makefile | 1 +
lib/librte_eal/linuxapp/eal/rte_eal_version.map | 15 ++
7 files changed, 400 insertions(+), 1 deletion(-)
create mode 100644 lib/librte_eal/common/eal_common_bus.c
create mode 100644 lib/librte_eal/common/include/rte_bus.h
diff --git a/lib/librte_eal/bsdapp/eal/rte_eal_version.map b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
index 2f81f7c..23fc1c1 100644
--- a/lib/librte_eal/bsdapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
@@ -174,3 +174,18 @@ DPDK_16.11 {
rte_eal_vdrv_unregister;
} DPDK_16.07;
+
+DPDK_17.02 {
+ global:
+
+ rte_bus_list;
+ rte_eal_bus_add_device;
+ rte_eal_bus_add_driver;
+ rte_eal_get_bus;
+ rte_eal_bus_dump;
+ rte_eal_bus_register;
+ rte_eal_bus_remove_device;
+ rte_eal_bus_remove_driver;
+ rte_eal_bus_unregister;
+
+} DPDK_16.11;
diff --git a/lib/librte_eal/common/Makefile b/lib/librte_eal/common/Makefile
index dfd64aa..79f958d 100644
--- a/lib/librte_eal/common/Makefile
+++ b/lib/librte_eal/common/Makefile
@@ -38,7 +38,7 @@ INC += rte_per_lcore.h rte_random.h
INC += rte_tailq.h rte_interrupts.h rte_alarm.h
INC += rte_string_fns.h rte_version.h
INC += rte_eal_memconfig.h rte_malloc_heap.h
-INC += rte_hexdump.h rte_devargs.h rte_dev.h rte_vdev.h
+INC += rte_hexdump.h rte_devargs.h rte_bus.h rte_dev.h rte_vdev.h
INC += rte_pci_dev_feature_defs.h rte_pci_dev_features.h
INC += rte_malloc.h rte_keepalive.h rte_time.h
diff --git a/lib/librte_eal/common/eal_common_bus.c b/lib/librte_eal/common/eal_common_bus.c
new file mode 100644
index 0000000..612f64e
--- /dev/null
+++ b/lib/librte_eal/common/eal_common_bus.c
@@ -0,0 +1,192 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 NXP
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of NXP nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <sys/queue.h>
+
+#include <rte_bus.h>
+#include <rte_devargs.h>
+#include <rte_debug.h>
+
+#include "eal_private.h"
+
+struct rte_bus_list rte_bus_list =
+ TAILQ_HEAD_INITIALIZER(rte_bus_list);
+
+/** @internal
+ * Add a device to a bus.
+ */
+void
+rte_eal_bus_add_device(struct rte_bus *bus, struct rte_device *dev)
+{
+ RTE_VERIFY(bus);
+ RTE_VERIFY(dev);
+
+ TAILQ_INSERT_TAIL(&bus->device_list, dev, next);
+ dev->bus = bus;
+}
+
+/** @internal
+ * Remove a device from its bus.
+ */
+void
+rte_eal_bus_remove_device(struct rte_device *dev)
+{
+ struct rte_bus *bus;
+
+ RTE_VERIFY(dev);
+ RTE_VERIFY(dev->bus);
+
+ bus = dev->bus;
+ TAILQ_REMOVE(&bus->device_list, dev, next);
+ dev->bus = NULL;
+}
+
+/** @internal
+ * Associate a driver with a bus.
+ */
+void
+rte_eal_bus_add_driver(struct rte_bus *bus, struct rte_driver *drv)
+{
+ RTE_VERIFY(bus);
+ RTE_VERIFY(drv);
+
+ TAILQ_INSERT_TAIL(&bus->driver_list, drv, next);
+ drv->bus = bus;
+}
+
+/** @internal
+ * Disassociate a driver from bus.
+ */
+void
+rte_eal_bus_remove_driver(struct rte_driver *drv)
+{
+ struct rte_bus *bus;
+
+ RTE_VERIFY(drv);
+ RTE_VERIFY(drv->bus);
+
+ bus = drv->bus;
+ TAILQ_REMOVE(&bus->driver_list, drv, next);
+ drv->bus = NULL;
+}
+
+/**
+ * Get the bus handle using its name
+ */
+struct rte_bus *
+rte_eal_get_bus(const char *bus_name)
+{
+ struct rte_bus *bus;
+
+ RTE_VERIFY(bus_name);
+
+ TAILQ_FOREACH(bus, &rte_bus_list, next) {
+ RTE_VERIFY(bus->name);
+
+ if (!strcmp(bus_name, bus->name)) {
+ RTE_LOG(DEBUG, EAL, "Returning Bus object %p\n", bus);
+ return bus;
+ }
+ }
+
+ /* Unable to find bus requested */
+ return NULL;
+}
+
+/* register a bus */
+void
+rte_eal_bus_register(struct rte_bus *bus)
+{
+ RTE_VERIFY(bus);
+ RTE_VERIFY(bus->name && strlen(bus->name));
+
+ /* Initialize the driver and device list associated with the bus */
+ TAILQ_INIT(&(bus->driver_list));
+ TAILQ_INIT(&(bus->device_list));
+
+ TAILQ_INSERT_TAIL(&rte_bus_list, bus, next);
+ RTE_LOG(INFO, EAL, "Registered [%s] bus.\n", bus->name);
+}
+
+/* unregister a bus */
+void
+rte_eal_bus_unregister(struct rte_bus *bus)
+{
+ /* All devices and drivers associated with the bus should have been
+ * 'device->uninit' and 'driver->remove()' already.
+ */
+ RTE_VERIFY(TAILQ_EMPTY(&(bus->driver_list)));
+ RTE_VERIFY(TAILQ_EMPTY(&(bus->device_list)));
+
+ /* TODO: For each device, call its rte_device->driver->remove()
+ * and rte_eal_bus_remove_driver()
+ */
+
+ TAILQ_REMOVE(&rte_bus_list, bus, next);
+ RTE_LOG(INFO, EAL, "Unregistered [%s] bus.\n", bus->name);
+}
+
+/* dump one bus info */
+static int
+bus_dump_one(FILE *f, struct rte_bus *bus)
+{
+ int ret;
+
+ /* For now, dump only the bus name */
+ ret = fprintf(f, " %s\n", bus->name);
+
+ /* Error in case of inability in writing to stream */
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void
+rte_eal_bus_dump(FILE *f)
+{
+ int ret;
+ struct rte_bus *bus;
+
+ TAILQ_FOREACH(bus, &rte_bus_list, next) {
+ ret = bus_dump_one(f, bus);
+ if (ret) {
+ RTE_LOG(ERR, EAL, "Unable to write to stream (%d)\n",
+ ret);
+ break;
+ }
+ }
+}
diff --git a/lib/librte_eal/common/include/rte_bus.h b/lib/librte_eal/common/include/rte_bus.h
new file mode 100644
index 0000000..f0297a9
--- /dev/null
+++ b/lib/librte_eal/common/include/rte_bus.h
@@ -0,0 +1,174 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 NXP
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of NXP nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BUS_H_
+#define _RTE_BUS_H_
+
+/**
+ * @file
+ *
+ * RTE PMD Bus Abstraction interfaces
+ *
+ * This file exposes APIs and Interfaces for Bus Abstraction over the devices
+ * drivers in EAL.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdio.h>
+#include <sys/queue.h>
+
+#include <rte_log.h>
+#include <rte_dev.h>
+
+/** Double linked list of buses */
+TAILQ_HEAD(rte_bus_list, rte_bus);
+
+/* Global Bus list */
+extern struct rte_bus_list rte_bus_list;
+
+struct rte_bus {
+ TAILQ_ENTRY(rte_bus) next; /**< Next bus object in linked list */
+ struct rte_driver_list driver_list;
+ /**< List of all drivers on bus */
+ struct rte_device_list device_list;
+ /**< List of all devices on bus */
+ const char *name; /**< Name of the bus */
+};
+
+/** @internal
+ * Add a device to a bus.
+ *
+ * @param bus
+ * Bus on which device is to be added
+ * @param dev
+ * Device handle
+ * @return
+ * None
+ */
+void
+rte_eal_bus_add_device(struct rte_bus *bus, struct rte_device *dev);
+
+/** @internal
+ * Remove a device from its bus.
+ *
+ * @param dev
+ * Device handle to remove
+ * @return
+ * None
+ */
+void
+rte_eal_bus_remove_device(struct rte_device *dev);
+
+/** @internal
+ * Associate a driver with a bus.
+ *
+ * @param bus
+ * Bus on which driver is to be added
+ * @param dev
+ * Driver handle
+ * @return
+ * None
+ */
+void
+rte_eal_bus_add_driver(struct rte_bus *bus, struct rte_driver *drv);
+
+/** @internal
+ * Disassociate a driver from its bus.
+ *
+ * @param dev
+ * Driver handle to remove
+ * @return
+ * None
+ */
+void
+rte_eal_bus_remove_driver(struct rte_driver *drv);
+
+/**
+ * Register a Bus handler.
+ *
+ * @param driver
+ * A pointer to a rte_bus structure describing the bus
+ * to be registered.
+ */
+void rte_eal_bus_register(struct rte_bus *bus);
+
+/**
+ * Unregister a Bus handler.
+ *
+ * @param driver
+ * A pointer to a rte_bus structure describing the bus
+ * to be unregistered.
+ */
+void rte_eal_bus_unregister(struct rte_bus *bus);
+
+/**
+ * Obtain handle for bus given its name.
+ *
+ * @param bus_name
+ * Name of the bus handle to search
+ * @return
+ * Pointer to Bus object if name matches any registered bus object
+ * NULL, if no matching bus found
+ */
+struct rte_bus *rte_eal_get_bus(const char *bus_name);
+
+/**
+ * Dump information of all the buses registered with EAL.
+ *
+ * @param f
+ * A valid and open output stream handle
+ *
+ * @return
+ * 0 in case of success
+ * !0 in case there is error in opening the output stream
+ */
+void rte_eal_bus_dump(FILE *f);
+
+/** Helper for Bus registration. The constructor has higher priority than
+ * PMD constructors
+ */
+#define RTE_REGISTER_BUS(nm, bus) \
+static void __attribute__((constructor(101), used)) businitfn_ ##nm(void) \
+{\
+ (bus).name = RTE_STR(nm);\
+ rte_eal_bus_register(&bus); \
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BUS_H */
diff --git a/lib/librte_eal/common/include/rte_dev.h b/lib/librte_eal/common/include/rte_dev.h
index 8840380..4004f9a 100644
--- a/lib/librte_eal/common/include/rte_dev.h
+++ b/lib/librte_eal/common/include/rte_dev.h
@@ -122,6 +122,7 @@ struct rte_driver;
*/
struct rte_device {
TAILQ_ENTRY(rte_device) next; /**< Next device */
+ struct rte_bus *bus; /**< Device connected to this bus */
struct rte_driver *driver; /**< Associated driver */
int numa_node; /**< NUMA node connection */
struct rte_devargs *devargs; /**< Device user arguments */
@@ -148,6 +149,7 @@ void rte_eal_device_remove(struct rte_device *dev);
*/
struct rte_driver {
TAILQ_ENTRY(rte_driver) next; /**< Next in list. */
+ struct rte_bus *bus; /**< Bus serviced by this driver */
const char *name; /**< Driver name. */
const char *alias; /**< Driver alias. */
};
diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile
index 4e206f0..aa874a5 100644
--- a/lib/librte_eal/linuxapp/eal/Makefile
+++ b/lib/librte_eal/linuxapp/eal/Makefile
@@ -87,6 +87,7 @@ SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_cpuflags.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_string_fns.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_hexdump.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_devargs.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_bus.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_dev.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_options.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_thread.c
diff --git a/lib/librte_eal/linuxapp/eal/rte_eal_version.map b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
index 83721ba..c873a7f 100644
--- a/lib/librte_eal/linuxapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
@@ -178,3 +178,18 @@ DPDK_16.11 {
rte_eal_vdrv_unregister;
} DPDK_16.07;
+
+DPDK_17.02 {
+ global:
+
+ rte_bus_list;
+ rte_eal_bus_add_device;
+ rte_eal_bus_add_driver;
+ rte_eal_get_bus;
+ rte_eal_bus_dump;
+ rte_eal_bus_register;
+ rte_eal_bus_remove_device;
+ rte_eal_bus_remove_driver;
+ rte_eal_bus_unregister;
+
+} DPDK_16.11;
--
2.7.4
next prev parent reply other threads:[~2016-12-04 10:09 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-04 10:11 [dpdk-dev] [PATCH 00/13] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 01/13] eal: define container_of macro Shreyansh Jain
2016-12-04 10:11 ` Shreyansh Jain [this message]
2016-12-04 10:11 ` [dpdk-dev] [PATCH 03/13] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 04/13] eal/bus: add scan and match support Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 05/13] eal/bus: add support for inserting a device on a bus Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 06/13] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 07/13] pci: replace probe and remove handlers with rte_driver Shreyansh Jain
2016-12-08 17:50 ` Ferruh Yigit
2016-12-09 4:59 ` Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 08/13] eal: enable probe and remove from bus infrastructure Shreyansh Jain
2016-12-06 10:45 ` Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 09/13] pci: split match and probe function Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 10/13] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 11/13] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 12/13] eal: enable PCI bus Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 13/13] eal/pci: remove PCI probe and init calls Shreyansh Jain
2016-12-06 20:52 ` [dpdk-dev] [PATCH 00/13] Introducing EAL Bus-Device-Driver Model David Marchand
2016-12-07 9:55 ` Shreyansh Jain
2016-12-07 12:17 ` David Marchand
2016-12-07 13:10 ` Shreyansh Jain
2016-12-07 13:24 ` Thomas Monjalon
2016-12-08 5:04 ` Shreyansh Jain
2016-12-08 7:21 ` Thomas Monjalon
2016-12-08 7:53 ` Shreyansh Jain
2016-12-12 14:35 ` Jianbo Liu
2016-12-13 6:56 ` Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 00/12] " Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 01/12] eal: define container_of macro Shreyansh Jain
2016-12-13 22:24 ` Jan Blunck
2016-12-14 5:12 ` Shreyansh Jain
2016-12-16 8:14 ` Jan Blunck
2016-12-16 9:23 ` Adrien Mazarguil
2016-12-16 10:47 ` Jan Blunck
2016-12-16 11:21 ` Adrien Mazarguil
2016-12-16 11:54 ` Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 02/12] eal/bus: introduce bus abstraction Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 03/12] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 04/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 05/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 06/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 07/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 08/12] pci: split match and probe function Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 09/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 10/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 11/12] eal: enable PCI bus Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 12/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2016-12-13 13:52 ` Andrew Rybchenko
2016-12-13 15:07 ` Ferruh Yigit
2016-12-14 5:14 ` Shreyansh Jain
2016-12-14 5:11 ` Shreyansh Jain
2016-12-14 9:49 ` Shreyansh Jain
2016-12-15 21:36 ` Jan Blunck
2016-12-26 9:14 ` Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 00/12] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 01/12] eal: define container_of macro Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 02/12] eal/bus: introduce bus abstraction Shreyansh Jain
2016-12-20 12:37 ` Hemant Agrawal
2016-12-20 13:17 ` Jan Blunck
2016-12-20 13:51 ` Shreyansh Jain
2016-12-20 17:11 ` Stephen Hemminger
2016-12-21 7:11 ` Shreyansh Jain
2016-12-21 15:38 ` Jan Blunck
2016-12-21 23:33 ` Stephen Hemminger
2016-12-22 5:12 ` Shreyansh Jain
2016-12-22 5:52 ` Shreyansh Jain
2016-12-25 17:39 ` Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 03/12] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 04/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-16 13:25 ` Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 05/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 06/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 07/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 08/12] pci: split match and probe function Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 09/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 10/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 11/12] eal: enable PCI bus and PCI test framework Shreyansh Jain
2016-12-16 13:20 ` Shreyansh Jain
2016-12-16 13:10 ` [dpdk-dev] [PATCH v3 12/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 00/12] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 01/12] eal/bus: introduce bus abstraction Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 02/12] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 03/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-26 13:27 ` Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 04/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 05/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 06/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 07/12] pci: split match and probe function Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 08/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 09/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 10/12] eal: enable PCI bus and PCI test framework Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 11/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2016-12-26 12:50 ` [dpdk-dev] [PATCH v4 12/12] eal/bus: add bus iteration macros Shreyansh Jain
2016-12-26 13:23 ` [dpdk-dev] [PATCH v5 00/12] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-26 13:23 ` [dpdk-dev] [PATCH v5 01/12] eal/bus: introduce bus abstraction Shreyansh Jain
2017-01-03 21:52 ` Thomas Monjalon
2017-01-06 10:31 ` Shreyansh Jain
2017-01-06 14:55 ` Thomas Monjalon
2017-01-09 6:24 ` Shreyansh Jain
2017-01-09 15:22 ` Ferruh Yigit
2017-01-10 4:07 ` Shreyansh Jain
2016-12-26 13:23 ` [dpdk-dev] [PATCH v5 02/12] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-26 13:23 ` [dpdk-dev] [PATCH v5 03/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-26 13:23 ` [dpdk-dev] [PATCH v5 04/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2017-01-03 21:46 ` Thomas Monjalon
2017-01-06 10:38 ` Shreyansh Jain
2017-01-06 12:00 ` Shreyansh Jain
2017-01-06 13:46 ` Thomas Monjalon
2017-01-09 6:35 ` Shreyansh Jain
2017-01-08 12:21 ` Rosen, Rami
2017-01-09 6:34 ` Shreyansh Jain
2016-12-26 13:23 ` [dpdk-dev] [PATCH v5 05/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2017-01-03 22:05 ` Thomas Monjalon
2017-01-06 11:44 ` Shreyansh Jain
2017-01-06 15:26 ` Thomas Monjalon
2017-01-09 6:28 ` Shreyansh Jain
2016-12-26 13:23 ` [dpdk-dev] [PATCH v5 06/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-26 13:24 ` [dpdk-dev] [PATCH v5 07/12] pci: split match and probe function Shreyansh Jain
2017-01-03 22:08 ` Thomas Monjalon
2016-12-26 13:24 ` [dpdk-dev] [PATCH v5 08/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2017-01-03 22:13 ` Thomas Monjalon
2017-01-06 12:03 ` Shreyansh Jain
2016-12-26 13:24 ` [dpdk-dev] [PATCH v5 09/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-26 13:24 ` [dpdk-dev] [PATCH v5 10/12] eal: enable PCI bus and PCI test framework Shreyansh Jain
2016-12-26 13:24 ` [dpdk-dev] [PATCH v5 11/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2017-01-09 15:19 ` Ferruh Yigit
2017-01-09 16:18 ` Ferruh Yigit
2017-01-10 4:09 ` Shreyansh Jain
2016-12-26 13:24 ` [dpdk-dev] [PATCH v5 12/12] eal/bus: add bus iteration macros Shreyansh Jain
2017-01-03 22:15 ` Thomas Monjalon
2017-01-03 22:22 ` [dpdk-dev] [PATCH v5 00/12] Introducing EAL Bus-Device-Driver Model Thomas Monjalon
2017-01-06 6:27 ` Shreyansh Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480846288-2517-3-git-send-email-shreyansh.jain@nxp.com \
--to=shreyansh.jain@nxp.com \
--cc=david.marchand@6wind.com \
--cc=dev@dpdk.org \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).