DPDK patches and discussions
 help / color / mirror / Atom feed
From: Shreyansh Jain <shreyansh.jain@nxp.com>
To: <dev@dpdk.org>, <david.marchand@6wind.com>
Cc: <thomas.monjalon@6wind.com>, <ferruh.yigit@intel.com>,
	<jianbo.liu@linaro.org>, Shreyansh Jain <shreyansh.jain@nxp.com>
Subject: [dpdk-dev] [PATCH v3 03/12] test: add basic bus infrastructure tests
Date: Fri, 16 Dec 2016 18:40:44 +0530	[thread overview]
Message-ID: <1481893853-31790-4-git-send-email-shreyansh.jain@nxp.com> (raw)
In-Reply-To: <1481893853-31790-1-git-send-email-shreyansh.jain@nxp.com>

Verification of bus registration, driver registration on a bus.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
 app/test/Makefile   |   2 +-
 app/test/test.h     |   2 +
 app/test/test_bus.c | 423 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 426 insertions(+), 1 deletion(-)
 create mode 100644 app/test/test_bus.c

diff --git a/app/test/Makefile b/app/test/Makefile
index 5be023a..ca0f106 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -94,7 +94,7 @@ SRCS-y += test_cycles.c
 SRCS-y += test_spinlock.c
 SRCS-y += test_memory.c
 SRCS-y += test_memzone.c
-
+SRCS-y += test_bus.c
 SRCS-y += test_ring.c
 SRCS-y += test_ring_perf.c
 SRCS-y += test_pmd_perf.c
diff --git a/app/test/test.h b/app/test/test.h
index 82831f4..c8ec43f 100644
--- a/app/test/test.h
+++ b/app/test/test.h
@@ -236,6 +236,8 @@ int commands_init(void);
 int test_pci(void);
 int test_pci_run;
 
+int test_bus(void);
+
 int test_mp_secondary(void);
 
 int test_set_rxtx_conf(cmdline_fixed_string_t mode);
diff --git a/app/test/test_bus.c b/app/test/test_bus.c
new file mode 100644
index 0000000..760d40a
--- /dev/null
+++ b/app/test/test_bus.c
@@ -0,0 +1,423 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016 NXP.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of NXP nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <sys/queue.h>
+
+#include <rte_bus.h>
+#include <rte_devargs.h>
+
+#include "test.h"
+#include "resource.h"
+
+/* Visualizing following bus-device-driver model for test
+ *
+ *  ===.===========.===========.=========,= busA
+ *     |           |           .         |
+ *   devA1       devA2         .         '____CPU_
+ *    `-----------`-------> driverA      |
+ *                                       '
+ *  ===.===========.===========.=========|= busB
+ *     |           |           .
+ *   devB1       devB2         .
+ *    `-----------`-------> driverB
+ *
+ */
+
+#define MAX_DEVICES_ON_BUS	10
+#define MAX_DRIVERS_ON_BUS	10
+
+/* A structure representing a ethernet/crypto device, embedding
+ * the rte_device.
+ */
+struct dummy_device {
+	const char *name;
+	struct rte_device dev;
+};
+
+/* Structure representing a Bus with devices attached to it, and drivers
+ * for those devices
+ */
+struct dummy_bus {
+	const char *name;
+	struct rte_bus *bus;
+	struct rte_driver *drivers[MAX_DRIVERS_ON_BUS];
+	struct dummy_device *devices[MAX_DEVICES_ON_BUS];
+};
+
+struct rte_bus_list orig_bus_list =
+	TAILQ_HEAD_INITIALIZER(orig_bus_list);
+
+struct rte_bus busA = {
+	.name = "busA", /* "busA" */
+};
+
+struct rte_bus busB = {
+	.name = "busB", /* "busB */
+};
+
+struct rte_driver driverA = {
+	.name = "driverA",
+};
+
+struct dummy_device devA1 = {
+	.name = "devA1",
+	.dev = {
+		.bus = NULL,
+		.driver = NULL,
+	}
+};
+
+struct dummy_device devA2 = {
+	.name = "devA2",
+	.dev = {
+		.bus = NULL,
+		.driver = NULL,
+	}
+};
+
+struct rte_driver driverB = {
+	.name = "driverB",
+};
+
+struct dummy_device devB1 = {
+	.name = "devB1",
+	.dev = {
+		.bus = NULL,
+		.driver = NULL,
+	}
+};
+
+struct dummy_device devB2 = {
+	.name = "devB2",
+	.dev = {
+		.bus = NULL,
+		.driver = NULL,
+	}
+};
+
+struct dummy_bus dummy_buses[] = {
+	{
+		.name = "busA",
+		.bus = &busA,
+		.drivers = {&driverA, NULL},
+		.devices = {&devA1, &devA2, NULL},
+	},
+	{
+		.name = "busB",
+		.bus = &busB,
+		.drivers = {&driverB, NULL},
+		.devices = {&devB1, &devB2, NULL},
+	},
+	{NULL, NULL, {NULL,}, {NULL,}, },
+};
+
+/* @internal
+ * Dump the device tree
+ */
+static void
+dump_device_tree(void)
+{
+	int i;
+	struct dummy_bus *db;
+	struct rte_bus *bus;
+	struct rte_driver *drv;
+	struct rte_device *dev;
+
+	printf("------>8-------\n");
+	printf("Device Tree:\n");
+	for (i = 0; dummy_buses[i].name; i++) {
+		db = &dummy_buses[i];
+
+		bus = rte_eal_get_bus(db->name);
+		if (!bus)
+			return;
+
+		printf(" Bus: %s\n", bus->name);
+
+		printf("  Drivers on bus:\n");
+		TAILQ_FOREACH(drv, &bus->driver_list, next) {
+			printf("    %s\n", drv->name);
+		}
+
+		printf("  Devices on bus:\n");
+		TAILQ_FOREACH(dev, &bus->device_list, next) {
+			printf("    Addr: %p\n", dev);
+			if (dev->driver)
+				printf("    Driver = %s\n", dev->driver->name);
+			else
+				printf("    Driver = None\n");
+		}
+	}
+	printf("------>8-------\n");
+}
+
+static int
+test_bus_setup(void)
+{
+	struct rte_bus *bus_p = NULL;
+
+	/* Preserve the original bus list before executing test */
+	while (!TAILQ_EMPTY(&rte_bus_list)) {
+		bus_p = TAILQ_FIRST(&rte_bus_list);
+		rte_eal_bus_unregister(bus_p);
+		TAILQ_INSERT_TAIL(&orig_bus_list, bus_p, next);
+	}
+
+	return 0;
+}
+
+static int
+test_bus_cleanup(void)
+{
+	struct rte_bus *bus_p = NULL;
+
+	/* Cleanup rte_bus_list before restoring entries */
+	while (!TAILQ_EMPTY(&rte_bus_list)) {
+		bus_p = TAILQ_FIRST(&rte_bus_list);
+		rte_eal_bus_unregister(bus_p);
+	}
+
+	bus_p = NULL;
+	/* Restore original entries */
+	while (!TAILQ_EMPTY(&orig_bus_list)) {
+		bus_p = TAILQ_FIRST(&orig_bus_list);
+		TAILQ_REMOVE(&orig_bus_list, bus_p, next);
+		rte_eal_bus_register(bus_p);
+	}
+
+	dump_device_tree();
+	return 0;
+}
+
+
+static int
+test_bus_registration(void)
+{
+	int i;
+	int ret;
+	struct rte_bus *bus = NULL;
+
+	for (i = 0; dummy_buses[i].name != NULL; i++) {
+		bus = dummy_buses[i].bus;
+		rte_eal_bus_register(bus);
+		printf("Registered Bus %s\n", dummy_buses[i].name);
+	}
+
+	/* Verify that all buses have been successfully registered */
+	i = 0;
+	TAILQ_FOREACH(bus, &rte_bus_list, next) {
+		/* Or, if the name of the bus is NULL */
+		if (!bus->name) {
+			/* Incorrect entry in list */
+			printf("Incorrect bus registered.\n");
+			return -1;
+		}
+
+		/* Or, if the bus name doesn't match that of dummy_buses */
+		ret = strcmp(bus->name, dummy_buses[i].name);
+		if (ret) {
+			/* Bus name doesn't match */
+			printf("Unable to correctly register bus (%s).\n",
+			       dummy_buses[i].name);
+			return -1;
+		}
+		i++;
+	}
+
+	/* Current value of dummy_buses[i] should be the NULL entry */
+	if (dummy_buses[i].name != NULL) {
+		printf("Not all buses were registered. For e.g. (%s)\n",
+		       dummy_buses[i].name);
+		return -1;
+	}
+
+	printf("Buses registered are:\n");
+	rte_eal_bus_dump(stdout);
+
+	return 0;
+}
+
+static int
+test_bus_unregistration(void)
+{
+	int i;
+	struct rte_bus *bus = NULL;
+
+	for (i = 0; dummy_buses[i].name != NULL; i++) {
+		bus = rte_eal_get_bus(dummy_buses[i].name);
+		if (bus) {
+			printf("Unregistering bus: '%s'\n", bus->name);
+			rte_eal_bus_unregister(bus);
+		}
+	}
+
+	if (!TAILQ_EMPTY(&rte_bus_list)) {
+		/* Unable to unregister all dummy buses */
+		printf("Unable to unregister all buses\n");
+		return -1;
+	}
+
+	printf("All buses have been unregistered.\n");
+	dump_device_tree();
+	return 0;
+}
+
+/* Positive case: For each driver in dummy_buses, perform
+ * registration
+ */
+static int
+test_driver_registration_on_bus(void)
+{
+	int i, j;
+	struct rte_bus *bus = NULL;
+	struct rte_driver *drv, *drv2;
+
+	/* For each bus on the dummy_buses list:
+	 * 1. get the bus reference
+	 * 2. register all drivers from dummy_buses
+	 */
+	for (i = 0; dummy_buses[i].name; i++) {
+		bus = rte_eal_get_bus(dummy_buses[i].name);
+		if (!bus) {
+			printf("Unable to find bus (%s)\n",
+			       dummy_buses[i].name);
+			return -1;
+		}
+
+		/* For bus 'bus', register all drivers */
+		for (j = 0; dummy_buses[i].drivers[j]; j++) {
+			drv = dummy_buses[i].drivers[j];
+			rte_eal_bus_add_driver(bus, drv);
+		}
+	}
+
+	/* Drivers have been registered. Verify by parsing the list */
+	drv = NULL;
+	for (i = 0; dummy_buses[i].name; i++) {
+		bus = rte_eal_get_bus(dummy_buses[i].name);
+		if (!bus) {
+			printf("Unable to find bus (%s)\n",
+			       dummy_buses[i].name);
+			return -1;
+		}
+
+		j = 0;
+		TAILQ_FOREACH(drv, &bus->driver_list, next) {
+			drv2 = dummy_buses[i].drivers[j++];
+			if (strcmp(drv2->name, drv->name)) {
+				printf("Incorrectly registered drivers."
+				       " Expected: %s; Available: %s\n",
+				       drv2->name, drv->name);
+				return -1;
+			}
+		}
+	}
+
+	printf("Driver registration test successful.\n");
+	dump_device_tree();
+
+	return 0;
+}
+
+static int
+test_driver_unregistration_on_bus(void)
+{
+	int i;
+	struct rte_bus *bus = NULL;
+	struct rte_driver *drv;
+
+	for (i = 0; dummy_buses[i].name; i++) {
+		bus = rte_eal_get_bus(dummy_buses[i].name);
+		if (!bus) {
+			printf("Unable to find bus (%s)\n",
+			       dummy_buses[i].name);
+			return -1;
+		}
+
+		/* For bus 'bus', unregister all drivers */
+		TAILQ_FOREACH(drv, &bus->driver_list, next) {
+			rte_eal_bus_remove_driver(drv);
+		}
+	}
+
+	/* Verifying that all drivers have been removed */
+	for (i = 0; dummy_buses[i].name; i++) {
+		bus = rte_eal_get_bus(dummy_buses[i].name);
+
+		if (!TAILQ_EMPTY(&bus->driver_list)) {
+			printf("Unable to remove all drivers on bus (%s)\n",
+			       bus->name);
+			return -1;
+		}
+	}
+
+	printf("Unregistration of drivers on all buses is successful.\n");
+	/* All devices from all buses have been removed */
+	dump_device_tree();
+	return 0;
+
+}
+
+int
+test_bus(void)
+{
+	/* Make necessary arrangements before starting test */
+	if (test_bus_setup())
+		return -1;
+
+	if (test_bus_registration())
+		return -1;
+
+	/* Assuming that buses are already registered, register drivers
+	 * with them.
+	 */
+	if (test_driver_registration_on_bus())
+		return -1;
+
+	if (test_driver_unregistration_on_bus())
+		return -1;
+
+	if (test_bus_unregistration())
+		return -1;
+
+	/* Restore the original environment/settings */
+	if (test_bus_cleanup())
+		return -1;
+
+	return 0;
+}
+
+REGISTER_TEST_COMMAND(bus_autotest, test_bus);
-- 
2.7.4

  parent reply	other threads:[~2016-12-16 13:09 UTC|newest]

Thread overview: 132+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-04 10:11 [dpdk-dev] [PATCH 00/13] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 01/13] eal: define container_of macro Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 02/13] eal/bus: introduce bus abstraction Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 03/13] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 04/13] eal/bus: add scan and match support Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 05/13] eal/bus: add support for inserting a device on a bus Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 06/13] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 07/13] pci: replace probe and remove handlers with rte_driver Shreyansh Jain
2016-12-08 17:50   ` Ferruh Yigit
2016-12-09  4:59     ` Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 08/13] eal: enable probe and remove from bus infrastructure Shreyansh Jain
2016-12-06 10:45   ` Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 09/13] pci: split match and probe function Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 10/13] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 11/13] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 12/13] eal: enable PCI bus Shreyansh Jain
2016-12-04 10:11 ` [dpdk-dev] [PATCH 13/13] eal/pci: remove PCI probe and init calls Shreyansh Jain
2016-12-06 20:52 ` [dpdk-dev] [PATCH 00/13] Introducing EAL Bus-Device-Driver Model David Marchand
2016-12-07  9:55   ` Shreyansh Jain
2016-12-07 12:17     ` David Marchand
2016-12-07 13:10       ` Shreyansh Jain
2016-12-07 13:24         ` Thomas Monjalon
2016-12-08  5:04           ` Shreyansh Jain
2016-12-08  7:21             ` Thomas Monjalon
2016-12-08  7:53               ` Shreyansh Jain
2016-12-12 14:35         ` Jianbo Liu
2016-12-13  6:56           ` Shreyansh Jain
2016-12-13 13:37 ` [dpdk-dev] [PATCH v2 00/12] " Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 01/12] eal: define container_of macro Shreyansh Jain
2016-12-13 22:24     ` Jan Blunck
2016-12-14  5:12       ` Shreyansh Jain
2016-12-16  8:14         ` Jan Blunck
2016-12-16  9:23           ` Adrien Mazarguil
2016-12-16 10:47             ` Jan Blunck
2016-12-16 11:21               ` Adrien Mazarguil
2016-12-16 11:54                 ` Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 02/12] eal/bus: introduce bus abstraction Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 03/12] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 04/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 05/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 06/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 07/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 08/12] pci: split match and probe function Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 09/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 10/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 11/12] eal: enable PCI bus Shreyansh Jain
2016-12-13 13:37   ` [dpdk-dev] [PATCH v2 12/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2016-12-13 13:52     ` Andrew Rybchenko
2016-12-13 15:07       ` Ferruh Yigit
2016-12-14  5:14         ` Shreyansh Jain
2016-12-14  5:11       ` Shreyansh Jain
2016-12-14  9:49     ` Shreyansh Jain
2016-12-15 21:36       ` Jan Blunck
2016-12-26  9:14         ` Shreyansh Jain
2016-12-16 13:10   ` [dpdk-dev] [PATCH v3 00/12] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 01/12] eal: define container_of macro Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 02/12] eal/bus: introduce bus abstraction Shreyansh Jain
2016-12-20 12:37       ` Hemant Agrawal
2016-12-20 13:17       ` Jan Blunck
2016-12-20 13:51         ` Shreyansh Jain
2016-12-20 17:11         ` Stephen Hemminger
2016-12-21  7:11           ` Shreyansh Jain
2016-12-21 15:38           ` Jan Blunck
2016-12-21 23:33             ` Stephen Hemminger
2016-12-22  5:12               ` Shreyansh Jain
2016-12-22  5:52                 ` Shreyansh Jain
2016-12-25 17:39         ` Shreyansh Jain
2016-12-16 13:10     ` Shreyansh Jain [this message]
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 04/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-16 13:25       ` Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 05/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 06/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 07/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 08/12] pci: split match and probe function Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 09/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 10/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 11/12] eal: enable PCI bus and PCI test framework Shreyansh Jain
2016-12-16 13:20       ` Shreyansh Jain
2016-12-16 13:10     ` [dpdk-dev] [PATCH v3 12/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2016-12-26 12:50     ` [dpdk-dev] [PATCH v4 00/12] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 01/12] eal/bus: introduce bus abstraction Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 02/12] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 03/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-26 13:27         ` Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 04/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 05/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 06/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 07/12] pci: split match and probe function Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 08/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 09/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 10/12] eal: enable PCI bus and PCI test framework Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 11/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2016-12-26 12:50       ` [dpdk-dev] [PATCH v4 12/12] eal/bus: add bus iteration macros Shreyansh Jain
2016-12-26 13:23       ` [dpdk-dev] [PATCH v5 00/12] Introducing EAL Bus-Device-Driver Model Shreyansh Jain
2016-12-26 13:23         ` [dpdk-dev] [PATCH v5 01/12] eal/bus: introduce bus abstraction Shreyansh Jain
2017-01-03 21:52           ` Thomas Monjalon
2017-01-06 10:31             ` Shreyansh Jain
2017-01-06 14:55               ` Thomas Monjalon
2017-01-09  6:24                 ` Shreyansh Jain
2017-01-09 15:22           ` Ferruh Yigit
2017-01-10  4:07             ` Shreyansh Jain
2016-12-26 13:23         ` [dpdk-dev] [PATCH v5 02/12] test: add basic bus infrastructure tests Shreyansh Jain
2016-12-26 13:23         ` [dpdk-dev] [PATCH v5 03/12] eal/bus: add scan, match and insert support Shreyansh Jain
2016-12-26 13:23         ` [dpdk-dev] [PATCH v5 04/12] eal: integrate bus scan and probe with EAL Shreyansh Jain
2017-01-03 21:46           ` Thomas Monjalon
2017-01-06 10:38             ` Shreyansh Jain
2017-01-06 12:00               ` Shreyansh Jain
2017-01-06 13:46                 ` Thomas Monjalon
2017-01-09  6:35                   ` Shreyansh Jain
2017-01-08 12:21           ` Rosen, Rami
2017-01-09  6:34             ` Shreyansh Jain
2016-12-26 13:23         ` [dpdk-dev] [PATCH v5 05/12] eal: add probe and remove support for rte_driver Shreyansh Jain
2017-01-03 22:05           ` Thomas Monjalon
2017-01-06 11:44             ` Shreyansh Jain
2017-01-06 15:26               ` Thomas Monjalon
2017-01-09  6:28                 ` Shreyansh Jain
2016-12-26 13:23         ` [dpdk-dev] [PATCH v5 06/12] eal: enable probe from bus infrastructure Shreyansh Jain
2016-12-26 13:24         ` [dpdk-dev] [PATCH v5 07/12] pci: split match and probe function Shreyansh Jain
2017-01-03 22:08           ` Thomas Monjalon
2016-12-26 13:24         ` [dpdk-dev] [PATCH v5 08/12] eal/pci: generalize args of PCI scan/match towards RTE device/driver Shreyansh Jain
2017-01-03 22:13           ` Thomas Monjalon
2017-01-06 12:03             ` Shreyansh Jain
2016-12-26 13:24         ` [dpdk-dev] [PATCH v5 09/12] pci: Pass rte_pci_addr to functions instead of separate args Shreyansh Jain
2016-12-26 13:24         ` [dpdk-dev] [PATCH v5 10/12] eal: enable PCI bus and PCI test framework Shreyansh Jain
2016-12-26 13:24         ` [dpdk-dev] [PATCH v5 11/12] drivers: update PMDs to use rte_driver probe and remove Shreyansh Jain
2017-01-09 15:19           ` Ferruh Yigit
2017-01-09 16:18             ` Ferruh Yigit
2017-01-10  4:09               ` Shreyansh Jain
2016-12-26 13:24         ` [dpdk-dev] [PATCH v5 12/12] eal/bus: add bus iteration macros Shreyansh Jain
2017-01-03 22:15           ` Thomas Monjalon
2017-01-03 22:22         ` [dpdk-dev] [PATCH v5 00/12] Introducing EAL Bus-Device-Driver Model Thomas Monjalon
2017-01-06  6:27           ` Shreyansh Jain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481893853-31790-4-git-send-email-shreyansh.jain@nxp.com \
    --to=shreyansh.jain@nxp.com \
    --cc=david.marchand@6wind.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jianbo.liu@linaro.org \
    --cc=thomas.monjalon@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).