DPDK patches and discussions
 help / color / mirror / Atom feed
From: Arek Kusztal <arkadiuszx.kusztal@intel.com>
To: dev@dpdk.org, fiona.trahe@intel.com
Cc: akhil.goyal@nxp.com, Arek Kusztal <arkadiuszx.kusztal@intel.com>
Subject: [dpdk-dev] [PATCH v2] doc/crypto: add release notes and more detailed doc to qat
Date: Thu, 18 Apr 2019 11:51:25 +0200	[thread overview]
Message-ID: <20190418095125.12528-1-arkadiuszx.kusztal@intel.com> (raw)
Message-ID: <20190418095125.MkaO-vPDORhbL1FiH9mLVjBj2MK7-bvkq-BcYLeNxUk@z> (raw)

This patch adds release notes to 19.05 release document, and more
detailed description to Intel QuickAssist Technology driver
documentation files for asymmmetric crypto PMD.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
---
Note: 
This patch superseeds 
"doc/crypto: add supported asymmetric crypto algorithms to qat)"
https://patches.dpdk.org/patch/52281/

 doc/guides/cryptodevs/features/qat.ini |  2 +
 doc/guides/cryptodevs/qat.rst          | 72 +++++++++++++++++++++++++---------
 doc/guides/rel_notes/release_19_05.rst |  6 +++
 3 files changed, 61 insertions(+), 19 deletions(-)

diff --git a/doc/guides/cryptodevs/features/qat.ini b/doc/guides/cryptodevs/features/qat.ini
index 8132580..e8f9060 100644
--- a/doc/guides/cryptodevs/features/qat.ini
+++ b/doc/guides/cryptodevs/features/qat.ini
@@ -67,3 +67,5 @@ AES CCM (256) = Y
 ; Supported Asymmetric algorithms of the 'qat' crypto driver.
 ;
 [Asymmetric]
+Modular Exponentiation  = Y
+Modular Inversion		= Y
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 2c4ee62..cb81dbb 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -6,7 +6,7 @@ Intel(R) QuickAssist (QAT) Crypto Poll Mode Driver
 
 QAT documentation consists of three parts:
 
-* Details of the symmetric crypto service below.
+* Details of the symmetric and asymmetric crypto service below.
 * Details of the `compression service <http://doc.dpdk.org/guides/compressdevs/qat_comp.html>`_
   in the compressdev drivers section.
 * Details of building the common QAT infrastructure and the PMDs to support the
@@ -16,8 +16,8 @@ QAT documentation consists of three parts:
 Symmetric Crypto Service on QAT
 -------------------------------
 
-The QAT crypto PMD provides poll mode crypto driver support for the following
-hardware accelerator devices:
+The QAT symmetric crypto PMD (hereafter referred to `QAT SYM [PMD]`) provides
+poll mode crypto driver support for the following hardware accelerator devices:
 
 * ``Intel QuickAssist Technology DH895xCC``
 * ``Intel QuickAssist Technology C62x``
@@ -29,7 +29,7 @@ hardware accelerator devices:
 Features
 ~~~~~~~~
 
-The QAT PMD has support for:
+The QAT SYM PMD has support for:
 
 Cipher algorithms:
 
@@ -104,14 +104,26 @@ must be such that points at the start of the COUNT bytes.
 Asymmetric Crypto Service on QAT
 --------------------------------
 
-The QAT Asym PMD has support for:
+The QAT asymmetric crypto PMD (hereafter referred to `QAT ASYM [PMD]`) provides
+poll mode crypto driver support for the following hardware accelerator devices:
 
-* ``Modular exponentiation``
-* ``Modular multiplicative inverse``
+* ``Intel QuickAssist Technology DH895xCC``
+* ``Intel QuickAssist Technology C62x``
+* ``Intel QuickAssist Technology C3xxx``
+* ``Intel QuickAssist Technology D15xx``
+* ``Intel QuickAssist Technology C4xxx``
+
+The QAT ASYM PMD has support for:
+
+* ``RTE_CRYPTO_ASYM_XFORM_MODEX``
+* ``RTE_CRYPTO_ASYM_XFORM_MODINV``
 
 Limitations
 ~~~~~~~~~~~
 
+* Big integers longer than 4096 bits are not supported.
+* Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported).
+
 .. _building_qat:
 
 Building PMDs on QAT
@@ -144,6 +156,8 @@ Quick instructions for QAT cryptodev PMD are as follows:
 	cd to the top-level DPDK directory
 	make defconfig
 	sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT_SYM\)=n,\1=y,' build/.config
+	or/and
+	sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_QAT_ASYM\)=n,\1=y,' build/.config
 	make
 
 Quick instructions for QAT compressdev PMD are as follows:
@@ -166,13 +180,14 @@ These are the build configuration options affecting QAT, and their default value
 
 	CONFIG_RTE_LIBRTE_PMD_QAT=y
 	CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
+	CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
 	CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
 	CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
 
 CONFIG_RTE_LIBRTE_PMD_QAT must be enabled for any QAT PMD to be built.
 
-The QAT cryptodev PMD has an external dependency on libcrypto, so is not
-built by default. CONFIG_RTE_LIBRTE_PMD_QAT_SYM should be enabled to build it.
+Both QAT SYM PMD and QAT ASYM PMD have an external dependency on libcrypto, so are not
+built by default. CONFIG_RTE_LIBRTE_PMD_QAT_SYM/ASYM should be enabled to build them.
 
 The QAT compressdev PMD has no external dependencies, so needs no configuration
 options and is built by default.
@@ -204,18 +219,21 @@ allocated while for GEN1 devices, 12 buffers are allocated, plus 1472 bytes over
 Device and driver naming
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
-* The qat cryptodev driver name is "crypto_qat".
+* The qat cryptodev symmetric crypto driver name is "crypto_qat".
+* The qat cryptodev asymmetric crypto driver name is "crypto_qat_asym".
   The "rte_cryptodev_devices_get()" returns the devices exposed by this driver.
 
-* Each qat crypto device has a unique name, in format
+* Each qat sym crypto device has a unique name, in format
   "<pci bdf>_<service>", e.g. "0000:41:01.0_qat_sym".
+* Each qat asym crypto device has a unique name, in format
+  "<pci bdf>_<service>", e.g. "0000:41:01.0_qat_asym".
   This name can be passed to "rte_cryptodev_get_dev_id()" to get the device_id.
 
 .. Note::
 
-	The qat crypto driver name is passed to the dpdk-test-crypto-perf tool in the "-devtype" parameter.
+	The qat sym crypto driver name is passed to the dpdk-test-crypto-perf tool in the "-devtype" parameter.
 
-	The qat crypto device name is in the format of the slave parameter passed to the crypto scheduler.
+	The qat sym crypto device name is in the format of the slave parameter passed to the crypto scheduler.
 
 * The qat compressdev driver name is "compress_qat".
   The rte_compressdev_devices_get() returns the devices exposed by this driver.
@@ -266,19 +284,19 @@ to see the full table)
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
    | S   | A   | C   | Gen | Device   | Driver/ver    | Kernel Module | Pci Driver | PF Did | #PFs | VF Did | VFs/PF |
    +=====+=====+=====+=====+==========+===============+===============+============+========+======+========+========+
-   | Yes | No  | No  | 1   | DH895xCC | linux/4.4+    | qat_dh895xcc  | dh895xcc   | 435    | 1    | 443    | 32     |
+   | Yes | No | No   | 1   | DH895xCC | linux/4.4+    | qat_dh895xcc  | dh895xcc   | 435    | 1    | 443    | 32     |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
-   | Yes | No  | No  | "   | "        | 01.org/4.2.0+ | "             | "          | "      | "    | "      | "      |
+   | Yes | Yes | No  | "   | "        | 01.org/4.2.0+ | "             | "          | "      | "    | "      | "      |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
-   | Yes | No  | Yes | "   | "        | 01.org/4.3.0+ | "             | "          | "      | "    | "      | "      |
+   | Yes | Yes | Yes | "   | "        | 01.org/4.3.0+ | "             | "          | "      | "    | "      | "      |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
    | Yes | No  | No  | 2   | C62x     | linux/4.5+    | qat_c62x      | c6xx       | 37c8   | 3    | 37c9   | 16     |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
-   | Yes | No  | Yes | "   | "        | 01.org/4.2.0+ | "             | "          | "      | "    | "      | "      |
+   | Yes | Yes | Yes | "   | "        | 01.org/4.2.0+ | "             | "          | "      | "    | "      | "      |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
    | Yes | No  | No  | 2   | C3xxx    | linux/4.5+    | qat_c3xxx     | c3xxx      | 19e2   | 1    | 19e3   | 16     |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
-   | Yes | No  | Yes | "   | "        | 01.org/4.2.0+ | "             | "          | "      | "    | "      | "      |
+   | Yes | Yes | Yes | "   | "        | 01.org/4.2.0+ | "             | "          | "      | "    | "      | "      |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
    | Yes | No  | No  | 2   | D15xx    | p             | qat_d15xx     | d15xx      | 6f54   | 1    | 6f55   | 16     |
    +-----+-----+-----+-----+----------+---------------+---------------+------------+--------+------+--------+--------+
@@ -540,7 +558,7 @@ Another way to bind the VFs to the DPDK UIO driver is by using the
 Testing
 ~~~~~~~
 
-QAT crypto PMD can be tested by running the test application::
+QAT SYM crypto PMD can be tested by running the test application::
 
     make defconfig
     make -j
@@ -548,6 +566,14 @@ QAT crypto PMD can be tested by running the test application::
     ./test -l1 -n1 -w <your qat bdf>
     RTE>>cryptodev_qat_autotest
 
+QAT ASYM crypto PMD can be tested by running the test application::
+
+    make defconfig
+    make -j
+    cd ./build/app
+    ./test -l1 -n1 -w <your qat bdf>
+    RTE>>cryptodev_qat_asym_autotest
+
 QAT compression PMD can be tested by running the test application::
 
     make defconfig
@@ -557,6 +583,14 @@ QAT compression PMD can be tested by running the test application::
     ./test -l1 -n1 -w <your qat bdf>
     RTE>>compressdev_autotest
 
+.. Note::
+
+	Number of crypto devices is limited by configuration constant CONFIG_RTE_CRYPTO_MAX_DEVS.
+	It may happen that number of probed devices will be bigger than this, in which case
+	DPDK will show error during initialisation of PMD. To avoid this problem
+	CONFIG_RTE_CRYPTO_MAX_DEVS may be enlarged or -w, pci-whitelist domain:bus:devid:func
+	option may be used.
+
 
 Debugging
 ~~~~~~~~~
diff --git a/doc/guides/rel_notes/release_19_05.rst b/doc/guides/rel_notes/release_19_05.rst
index b0928a6..969794c 100644
--- a/doc/guides/rel_notes/release_19_05.rst
+++ b/doc/guides/rel_notes/release_19_05.rst
@@ -160,6 +160,12 @@ New Features
   Improved testpmd application performance on ARM platform. For ``macswap``
   forwarding mode, NEON intrinsics were used to do swap to save CPU cycles.
 
+* **Added Intel QuickAssist Technology PMD for asymmetric crypto.**
+
+  A new QAT Crypto PMD has been added, which provides asymmetric cryptography
+  algorithms, in this release modular exponentiation and modular multiplicative
+  inverse algorithms were added.
+
 
 Removed Items
 -------------
-- 
2.1.0


             reply	other threads:[~2019-04-18  9:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-18  9:51 Arek Kusztal [this message]
2019-04-18  9:51 ` Arek Kusztal
2019-04-18 16:45 ` [dpdk-dev] [PATCH v3] " Fiona Trahe
2019-04-18 16:45   ` Fiona Trahe
2019-04-18 16:51   ` Kusztal, ArkadiuszX
2019-04-18 16:51     ` Kusztal, ArkadiuszX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190418095125.12528-1-arkadiuszx.kusztal@intel.com \
    --to=arkadiuszx.kusztal@intel.com \
    --cc=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    --cc=fiona.trahe@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).