From: "Juraj Linkeš" <juraj.linkes@pantheon.tech>
To: thomas@monjalon.net, david.marchand@redhat.com,
jerinjacobk@gmail.com, ronan.randles@intel.com,
Honnappa.Nagarahalli@arm.com, ohilyard@iol.unh.edu,
lijuan.tu@intel.com
Cc: dev@dpdk.org, "Juraj Linkeš" <juraj.linkes@pantheon.tech>
Subject: [PATCH v1 0/8] dts: ssh connection to a node
Date: Wed, 22 Jun 2022 12:14:40 +0000 [thread overview]
Message-ID: <20220622121448.3304251-1-juraj.linkes@pantheon.tech> (raw)
All the necessary code needed to connect to a node in a topology with
some extras, such as basic logging, per-node locks and some extra
useful methods.
To run the code, modify the two config files, execution.cfg and
conf/topology.cfg and execute ./main.py from the root dts folder. Here's
an example config:
cat execution.cfg
[Execution1]
sut=127.0.0.1
cat conf/topology.cfg
#Topology Configuration
#[SUT IP]
# sut_ip: SUT ip address
# sut_user: SUT username
# sut_passwd: SUT password
[127.0.0.1]
sut_ip=127.0.0.1
sut_user=root
sut_passwd=a
The code only connects to a node. You'll see logs emitted to console
saying where DTS connected.
There's no documentation, as there's not much to document - the above is
basically all there is to it, as far as user docs go. We'll add some
real docs when there's enough functionality to document, when the
HelloWorld testcases is in (point 4 in our roadmap below).
The config parser will be reworked in near future, so there's no need to
review it. While we're working on it, let's review the rest of the code.
This is our current roadmap:
1. Review this patchset and do the rest of the items in parallel, if
possible.
2. Finish the config parser rework.
3. Rebase this patch on top of 2 and send a new version (along with
addressed review comments).
4. We have extracted the code needed to run the most basic testcase,
HelloWorld, which runs the DPDK Hello World application. We'll split
this along logical/functional boundaries and send after 1 is done. In
fact, 1 is part of 4.
5. Once we have 4 applied, we'll planning on adding a basic functional
testcase - pf_smoke. This send a bit of traffic, so the big addition is
the software traffic generator, Scapy.
6. After 5, we'll add a basic performance testcases which doesn't use
Scapy, but Trex or Ixia instead.
7. This is far in the future, but at this point we should have all of
the core functionality in place. What then remains is adding the rest of
the testcases.
Juraj Linkeš (8):
dts: add ssh pexpect library
dts: add locks for parallel node connections
dts: add ssh connection extension
dts: add basic logging facility
dts: add Node base class
dts: add config parser module
dts: add dts runtime workflow module
dts: add main script for running dts
dts/conf/topology.cfg | 9 ++
dts/execution.cfg | 2 +
dts/framework/config.py | 81 ++++++++++++++
dts/framework/dts.py | 128 +++++++++++++++++++++
dts/framework/exception.py | 61 ++++++++++
dts/framework/logger.py | 86 ++++++++++++++
dts/framework/node.py | 95 ++++++++++++++++
dts/framework/settings.py | 42 +++++++
dts/framework/ssh_connection.py | 52 +++++++++
dts/framework/ssh_pexpect.py | 192 ++++++++++++++++++++++++++++++++
dts/framework/utils.py | 128 +++++++++++++++++++++
dts/main.py | 36 ++++++
12 files changed, 912 insertions(+)
create mode 100644 dts/conf/topology.cfg
create mode 100644 dts/execution.cfg
create mode 100644 dts/framework/config.py
create mode 100644 dts/framework/dts.py
create mode 100644 dts/framework/exception.py
create mode 100644 dts/framework/logger.py
create mode 100644 dts/framework/node.py
create mode 100644 dts/framework/settings.py
create mode 100644 dts/framework/ssh_connection.py
create mode 100644 dts/framework/ssh_pexpect.py
create mode 100644 dts/framework/utils.py
create mode 100755 dts/main.py
--
2.20.1
next reply other threads:[~2022-06-22 12:14 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-22 12:14 Juraj Linkeš [this message]
2022-06-22 12:14 ` [PATCH v1 1/8] dts: add ssh pexpect library Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 2/8] dts: add locks for parallel node connections Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 3/8] dts: add ssh connection extension Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 4/8] dts: add basic logging facility Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 5/8] dts: add Node base class Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 6/8] dts: add config parser module Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 7/8] dts: add dts runtime workflow module Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 8/8] dts: add main script for running dts Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 0/8] ssh connection to a node Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 1/8] dts: add basic logging facility Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 2/8] dts: add ssh pexpect library Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 3/8] dts: add locks for parallel node connections Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 4/8] dts: add ssh connection extension Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 5/8] dts: add config parser module Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 6/8] dts: add Node base class Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 7/8] dts: add dts workflow module Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 8/8] dts: add dts executable script Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 0/9] dts: ssh connection to a node Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 1/9] dts: add project tools config Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 2/9] dts: add developer tools Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 3/9] dts: add basic logging facility Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 4/9] dts: add ssh pexpect library Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 5/9] dts: add ssh connection extension Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 6/9] dts: add config parser module Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 7/9] dts: add Node base class Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 8/9] dts: add dts workflow module Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 9/9] dts: add dts executable script Juraj Linkeš
2022-07-29 10:55 ` [PATCH v4 0/9] dts: ssh connection to a node Juraj Linkeš
2022-07-29 10:55 ` [PATCH v4 1/9] dts: add project tools config Juraj Linkeš
2022-08-10 6:30 ` Tu, Lijuan
2022-09-07 16:16 ` Bruce Richardson
2022-09-09 13:38 ` Juraj Linkeš
2022-09-09 13:52 ` Bruce Richardson
2022-09-09 14:13 ` Juraj Linkeš
2022-09-12 14:06 ` Owen Hilyard
2022-09-12 15:15 ` Bruce Richardson
2022-09-13 12:08 ` Juraj Linkeš
2022-09-13 14:18 ` Bruce Richardson
2022-09-13 19:03 ` Honnappa Nagarahalli
2022-09-13 19:19 ` Honnappa Nagarahalli
2022-09-14 9:37 ` Thomas Monjalon
2022-09-14 12:55 ` Juraj Linkeš
2022-09-14 13:11 ` Bruce Richardson
2022-09-14 14:28 ` Thomas Monjalon
2022-09-21 10:49 ` Juraj Linkeš
2022-09-13 19:11 ` Honnappa Nagarahalli
2022-07-29 10:55 ` [PATCH v4 2/9] dts: add developer tools Juraj Linkeš
2022-08-10 6:30 ` Tu, Lijuan
2022-09-07 16:37 ` Bruce Richardson
2022-09-13 12:38 ` Juraj Linkeš
2022-09-13 20:38 ` Honnappa Nagarahalli
2022-09-14 7:37 ` Bruce Richardson
2022-09-14 12:45 ` Juraj Linkeš
2022-09-14 13:13 ` Bruce Richardson
2022-09-14 14:26 ` Thomas Monjalon
2022-09-14 19:08 ` Honnappa Nagarahalli
2022-09-20 12:14 ` Juraj Linkeš
2022-09-20 12:22 ` Tu, Lijuan
2022-07-29 10:55 ` [PATCH v4 3/9] dts: add basic logging facility Juraj Linkeš
2022-08-10 6:31 ` Tu, Lijuan
2022-09-08 8:31 ` Bruce Richardson
2022-09-13 12:52 ` Juraj Linkeš
2022-09-13 23:31 ` Honnappa Nagarahalli
2022-09-14 12:51 ` Juraj Linkeš
2022-07-29 10:55 ` [PATCH v4 4/9] dts: add ssh pexpect library Juraj Linkeš
2022-08-10 6:31 ` Tu, Lijuan
2022-09-08 9:53 ` Bruce Richardson
2022-09-13 13:36 ` Juraj Linkeš
2022-09-13 14:23 ` Bruce Richardson
2022-09-13 14:59 ` Stanislaw Kardach
2022-09-13 17:23 ` Owen Hilyard
2022-09-14 0:03 ` Honnappa Nagarahalli
2022-09-14 7:42 ` Bruce Richardson
2022-09-14 7:58 ` Stanislaw Kardach
2022-09-14 19:57 ` Honnappa Nagarahalli
2022-09-19 14:21 ` Owen Hilyard
2022-09-20 17:54 ` Honnappa Nagarahalli
2022-09-21 1:01 ` Tu, Lijuan
2022-09-21 5:37 ` Jerin Jacob
2022-09-22 9:03 ` Juraj Linkeš
2022-09-14 9:42 ` Stanislaw Kardach
2022-09-22 9:41 ` Juraj Linkeš
2022-09-22 14:32 ` Stanislaw Kardach
2022-09-23 7:22 ` Juraj Linkeš
2022-09-23 8:15 ` Bruce Richardson
2022-09-23 10:18 ` Stanislaw Kardach
2022-07-29 10:55 ` [PATCH v4 5/9] dts: add ssh connection extension Juraj Linkeš
2022-08-10 6:32 ` Tu, Lijuan
2022-09-13 17:04 ` Bruce Richardson
2022-09-13 17:32 ` Owen Hilyard
2022-09-14 7:46 ` Bruce Richardson
2022-09-14 12:02 ` Owen Hilyard
2022-09-14 13:15 ` Bruce Richardson
2022-07-29 10:55 ` [PATCH v4 6/9] dts: add config parser module Juraj Linkeš
2022-08-10 6:33 ` Tu, Lijuan
2022-09-13 17:19 ` Bruce Richardson
2022-09-13 17:47 ` Owen Hilyard
2022-09-14 7:48 ` Bruce Richardson
2022-07-29 10:55 ` [PATCH v4 7/9] dts: add Node base class Juraj Linkeš
2022-08-10 6:33 ` Tu, Lijuan
2022-07-29 10:55 ` [PATCH v4 8/9] dts: add dts workflow module Juraj Linkeš
2022-08-10 6:34 ` Tu, Lijuan
2022-07-29 10:55 ` [PATCH v4 9/9] dts: add dts executable script Juraj Linkeš
2022-08-10 6:35 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220622121448.3304251-1-juraj.linkes@pantheon.tech \
--to=juraj.linkes@pantheon.tech \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=jerinjacobk@gmail.com \
--cc=lijuan.tu@intel.com \
--cc=ohilyard@iol.unh.edu \
--cc=ronan.randles@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).