From: Stanislaw Kardach <kda@semihalf.com>
To: "Juraj Linkeš" <juraj.linkes@pantheon.tech>
Cc: thomas@monjalon.net, david.marchand@redhat.com,
ronan.randles@intel.com, Honnappa.Nagarahalli@arm.com,
ohilyard@iol.unh.edu, lijuan.tu@intel.com, dev@dpdk.org
Subject: Re: [PATCH v4 4/9] dts: add ssh pexpect library
Date: Wed, 14 Sep 2022 11:42:22 +0200 [thread overview]
Message-ID: <20220914094222.vprahs3kfhnsklyh@toster> (raw)
In-Reply-To: <20220729105550.1382664-5-juraj.linkes@pantheon.tech>
On Fri, Jul 29, 2022 at 10:55:45AM +0000, Juraj Linkeš wrote:
> The library uses the pexpect python library and implements connection to
> a node and two ways to interact with the node:
> 1. Send a string with specified prompt which will be matched after
> the string has been sent to the node.
> 2. Send a command to be executed. No prompt is specified here.
>
> Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
> Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
> ---
> dts/framework/exception.py | 57 ++++++++++
> dts/framework/ssh_pexpect.py | 205 +++++++++++++++++++++++++++++++++++
> dts/framework/utils.py | 12 ++
> 3 files changed, 274 insertions(+)
> create mode 100644 dts/framework/exception.py
> create mode 100644 dts/framework/ssh_pexpect.py
> create mode 100644 dts/framework/utils.py
>
> diff --git a/dts/framework/exception.py b/dts/framework/exception.py
> new file mode 100644
> index 0000000000..35e81a4d99
> --- /dev/null
> +++ b/dts/framework/exception.py
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2010-2014 Intel Corporation
> +# Copyright(c) 2022 PANTHEON.tech s.r.o.
> +# Copyright(c) 2022 University of New Hampshire
> +#
> +
> +"""
> +User-defined exceptions used across the framework.
> +"""
> +
> +
> +class TimeoutException(Exception):
> + """
> + Command execution timeout.
> + """
> +
> + command: str
> + output: str
> +
> + def __init__(self, command: str, output: str):
> + self.command = command
> + self.output = output
> +
> + def __str__(self) -> str:
> + return f"TIMEOUT on {self.command}"
> +
> + def get_output(self) -> str:
> + return self.output
> +
> +
> +class SSHConnectionException(Exception):
> + """
> + SSH connection error.
> + """
> +
> + host: str
> +
> + def __init__(self, host: str):
> + self.host = host
> +
> + def __str__(self) -> str:
> + return f"Error trying to connect with {self.host}"
> +
> +
> +class SSHSessionDeadException(Exception):
> + """
> + SSH session is not alive.
> + It can no longer be used.
> + """
> +
> + host: str
> +
> + def __init__(self, host: str):
> + self.host = host
> +
> + def __str__(self) -> str:
> + return f"SSH session with {self.host} has died"
> diff --git a/dts/framework/ssh_pexpect.py b/dts/framework/ssh_pexpect.py
> new file mode 100644
> index 0000000000..e8f64515c0
> --- /dev/null
> +++ b/dts/framework/ssh_pexpect.py
> @@ -0,0 +1,205 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2010-2014 Intel Corporation
> +# Copyright(c) 2022 PANTHEON.tech s.r.o.
> +# Copyright(c) 2022 University of New Hampshire
> +#
> +
> +import time
> +from typing import Optional
> +
> +from pexpect import pxssh
> +
> +from .exception import SSHConnectionException, SSHSessionDeadException, TimeoutException
> +from .logger import DTSLOG
> +from .utils import GREEN, RED
> +
> +"""
> +The module handles ssh sessions to TG and SUT.
> +It implements the send_expect function to send commands and get output data.
> +"""
> +
> +
> +class SSHPexpect:
> + username: str
> + password: str
> + node: str
> + logger: DTSLOG
> + magic_prompt: str
> +
> + def __init__(
> + self,
> + node: str,
> + username: str,
> + password: Optional[str],
> + logger: DTSLOG,
> + ):
> + self.magic_prompt = "MAGIC PROMPT"
Why is this necessary? pxssh is already setting target prompt to
pxssh.UNIQUE_PROMPT in the session constructor, to be specific:
self.UNIQUE_PROMPT = r"\[PEXPECT\][\$\#] "
self.PROMPT = self.UNIQUE_PROMPT
Also session.login() will change target prompt to that, exactly for the
reason of achieving a unique prompt that can be easily matched by pxssh.
So if "MAGIC PROMPT is the prompt that you'd like to have on the remote
host, then the following should be run after opening the session:
self.session.PROMPT = self.magic_prompt
if not self.session.set_unique_prompt():
do_some_error_handling()
Otherwise it's unnecessary.
> + self.logger = logger
> +
> + self.node = node
> + self.username = username
> + self.password = password or ""
> + self.logger.info(f"ssh {self.username}@{self.node}")
> +
> + self._connect_host()
> +
> + def _connect_host(self) -> None:
> + """
> + Create connection to assigned node.
> + """
> + retry_times = 10
> + try:
> + if ":" in self.node:
> + while retry_times:
> + self.ip = self.node.split(":")[0]
> + self.port = int(self.node.split(":")[1])
> + self.session = pxssh.pxssh(encoding="utf-8")
> + try:
> + self.session.login(
> + self.ip,
> + self.username,
> + self.password,
> + original_prompt="[$#>]",
> + port=self.port,
> + login_timeout=20,
> + password_regex=r"(?i)(?:password:)|(?:passphrase for key)|(?i)(password for .+:)",
> + )
> + except Exception as e:
> + print(e)
> + time.sleep(2)
> + retry_times -= 1
> + print("retry %d times connecting..." % (10 - retry_times))
> + else:
> + break
> + else:
> + raise Exception("connect to %s:%s failed" % (self.ip, self.port))
> + else:
> + self.session = pxssh.pxssh(encoding="utf-8")
> + self.session.login(
> + self.node,
> + self.username,
> + self.password,
> + original_prompt="[$#>]",
> + password_regex=r"(?i)(?:password:)|(?:passphrase for key)|(?i)(password for .+:)",
> + )
> + self.logger.info(f"Connection to {self.node} succeeded")
> + self.send_expect("stty -echo", "#")
> + self.send_expect("stty columns 1000", "#")
This works only by chance and makes hacks in get_output_before()
necessary. After some testing it seems that pxssh is matching AND
chomping the session.PROMPT when session.prompt() is called. Given the
UNIQUE_PROMPT, the root user prompt will be "[PEXPECT]#" so this
send_expect() will chomp # and leave "[PEXPECT]" as part of the output.
Given that the two above lines do not require any special output I think
self.send_command() should be used here.
> + except Exception as e:
> + print(RED(str(e)))
> + if getattr(self, "port", None):
> + suggestion = (
> + "\nSuggession: Check if the firewall on [ %s ] " % self.ip
> + + "is stopped\n"
> + )
> + print(GREEN(suggestion))
> +
> + raise SSHConnectionException(self.node)
> +
> + def send_expect_base(self, command: str, expected: str, timeout: float) -> str:
> + self.clean_session()
> + self.session.PROMPT = expected
> + self.__sendline(command)
> + self.__prompt(command, timeout)
> +
> + before = self.get_output_before()
Prompt should be reverted to whatever it was before leaving this
function.
> + return before
> +
> + def send_expect(
> + self, command: str, expected: str, timeout: float = 15, verify: bool = False
> + ) -> str | int:
> +
> + try:
> + ret = self.send_expect_base(command, expected, timeout)
> + if verify:
> + ret_status = self.send_expect_base("echo $?", expected, timeout)
"echo $?" will only print the return code. How is it supposed to match
"expected"? If "expected" is a return code then the first command's
output probably won't match.
I think send_command() should be used here.
> + if not int(ret_status):
> + return ret
The condition above seems like a C-ism used in python which again works
by mistake. Return code 0 will convert to integer 0 which will be
promoted to a boolean False. It would be more readable to change this
block to:
ri = int(ret_status)
if ri != 0:
# error prints
return ri
> + else:
> + self.logger.error("Command: %s failure!" % command)
> + self.logger.error(ret)
> + return int(ret_status)
> + else:
> + return ret
> + except Exception as e:
> + print(
> + RED(
> + "Exception happened in [%s] and output is [%s]"
> + % (command, self.get_output_before())
> + )
> + )
> + raise e
> +
> + def send_command(self, command: str, timeout: float = 1) -> str:
> + try:
> + self.clean_session()
> + self.__sendline(command)
> + except Exception as e:
> + raise e
> +
> + output = self.get_session_before(timeout=timeout)
> + self.session.PROMPT = self.session.UNIQUE_PROMPT
> + self.session.prompt(0.1)
This is wrong:
1. self.get_session_before() will return output of the command but since
it changed the expected (not real!) prompt to self.magic_prompt, that
won't be matched so the output will contain the prompt set by pxssh
(UNIQUE_PROMPT).
2. Then prompt is reset to UNIQUE_PROMPT but and prompt() is called but
that will only clean up the pxssh buffer. If get_session_before() was
not changing the session.PROMPT from UNIQUE_PROMPT to magic_prompt,
the second prompt() call would be unnecessary.
> +
> + return output
> +
> + def clean_session(self) -> None:
> + self.get_session_before(timeout=0.01)
What if remote host is slow for any reason? We'll timeout here. It seems
that such a small timeout value was used because clean_session() is
used in every send_command() call.
Come to think of it, why is this call necessary when we have
self.__flush()?
> +
> + def get_session_before(self, timeout: float = 15) -> str:
> + """
> + Get all output before timeout
> + """
> + self.session.PROMPT = self.magic_prompt
This line has no effect. Remote prompt was never set to
self.magic_prompt.
> + try:
> + self.session.prompt(timeout)
> + except Exception as e:
> + pass
> +
> + before = self.get_output_all()
> + self.__flush()
> +
> + return before
> +
> + def __flush(self) -> None:
> + """
> + Clear all session buffer
> + """
> + self.session.buffer = ""
> + self.session.before = ""
> +
> + def __prompt(self, command: str, timeout: float) -> None:
> + if not self.session.prompt(timeout):
> + raise TimeoutException(command, self.get_output_all()) from None
> +
> + def __sendline(self, command: str) -> None:
> + if not self.isalive():
> + raise SSHSessionDeadException(self.node)
> + if len(command) == 2 and command.startswith("^"):
> + self.session.sendcontrol(command[1])
> + else:
> + self.session.sendline(command)
> +
> + def get_output_before(self) -> str:
The name is missleading. In pxssh terms "before" means all the lines
before the matched expect()/prompt(). Here it returns the last line of
the output. Perhaps get_last_output_line() is better?
> + if not self.isalive():
> + raise SSHSessionDeadException(self.node)
> + before: list[str] = self.session.before.rsplit("\r\n", 1)
> + if before[0] == "[PEXPECT]":
> + before[0] = ""
Unnecessary if prompt was handled in proper way as mentioned above.
> +
> + return before[0]
> +
> + def get_output_all(self) -> str:
> + output: str = self.session.before
> + output.replace("[PEXPECT]", "")
Ditto. If session.PROMPT was restored properly, this function would not
be necessary at all.
> + return output
> +
> + def close(self, force: bool = False) -> None:
> + if force is True:
> + self.session.close()
> + else:
> + if self.isalive():
> + self.session.logout()
> +
> + def isalive(self) -> bool:
> + return self.session.isalive()
> diff --git a/dts/framework/utils.py b/dts/framework/utils.py
> new file mode 100644
> index 0000000000..db87349827
> --- /dev/null
> +++ b/dts/framework/utils.py
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2010-2014 Intel Corporation
> +# Copyright(c) 2022 PANTHEON.tech s.r.o.
> +# Copyright(c) 2022 University of New Hampshire
> +#
> +
> +def RED(text: str) -> str:
> + return f"\u001B[31;1m{str(text)}\u001B[0m"
> +
> +
> +def GREEN(text: str) -> str:
> + return f"\u001B[32;1m{str(text)}\u001B[0m"
> --
> 2.30.2
>
--
Best Regards,
Stanislaw Kardach
next prev parent reply other threads:[~2022-09-14 9:42 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-22 12:14 [PATCH v1 0/8] dts: ssh connection to a node Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 1/8] dts: add ssh pexpect library Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 2/8] dts: add locks for parallel node connections Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 3/8] dts: add ssh connection extension Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 4/8] dts: add basic logging facility Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 5/8] dts: add Node base class Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 6/8] dts: add config parser module Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 7/8] dts: add dts runtime workflow module Juraj Linkeš
2022-06-22 12:14 ` [PATCH v1 8/8] dts: add main script for running dts Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 0/8] ssh connection to a node Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 1/8] dts: add basic logging facility Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 2/8] dts: add ssh pexpect library Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 3/8] dts: add locks for parallel node connections Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 4/8] dts: add ssh connection extension Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 5/8] dts: add config parser module Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 6/8] dts: add Node base class Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 7/8] dts: add dts workflow module Juraj Linkeš
2022-07-11 14:51 ` [PATCH v2 8/8] dts: add dts executable script Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 0/9] dts: ssh connection to a node Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 1/9] dts: add project tools config Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 2/9] dts: add developer tools Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 3/9] dts: add basic logging facility Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 4/9] dts: add ssh pexpect library Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 5/9] dts: add ssh connection extension Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 6/9] dts: add config parser module Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 7/9] dts: add Node base class Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 8/9] dts: add dts workflow module Juraj Linkeš
2022-07-28 10:00 ` [PATCH v3 9/9] dts: add dts executable script Juraj Linkeš
2022-07-29 10:55 ` [PATCH v4 0/9] dts: ssh connection to a node Juraj Linkeš
2022-07-29 10:55 ` [PATCH v4 1/9] dts: add project tools config Juraj Linkeš
2022-08-10 6:30 ` Tu, Lijuan
2022-09-07 16:16 ` Bruce Richardson
2022-09-09 13:38 ` Juraj Linkeš
2022-09-09 13:52 ` Bruce Richardson
2022-09-09 14:13 ` Juraj Linkeš
2022-09-12 14:06 ` Owen Hilyard
2022-09-12 15:15 ` Bruce Richardson
2022-09-13 12:08 ` Juraj Linkeš
2022-09-13 14:18 ` Bruce Richardson
2022-09-13 19:03 ` Honnappa Nagarahalli
2022-09-13 19:19 ` Honnappa Nagarahalli
2022-09-14 9:37 ` Thomas Monjalon
2022-09-14 12:55 ` Juraj Linkeš
2022-09-14 13:11 ` Bruce Richardson
2022-09-14 14:28 ` Thomas Monjalon
2022-09-21 10:49 ` Juraj Linkeš
2022-09-13 19:11 ` Honnappa Nagarahalli
2022-07-29 10:55 ` [PATCH v4 2/9] dts: add developer tools Juraj Linkeš
2022-08-10 6:30 ` Tu, Lijuan
2022-09-07 16:37 ` Bruce Richardson
2022-09-13 12:38 ` Juraj Linkeš
2022-09-13 20:38 ` Honnappa Nagarahalli
2022-09-14 7:37 ` Bruce Richardson
2022-09-14 12:45 ` Juraj Linkeš
2022-09-14 13:13 ` Bruce Richardson
2022-09-14 14:26 ` Thomas Monjalon
2022-09-14 19:08 ` Honnappa Nagarahalli
2022-09-20 12:14 ` Juraj Linkeš
2022-09-20 12:22 ` Tu, Lijuan
2022-07-29 10:55 ` [PATCH v4 3/9] dts: add basic logging facility Juraj Linkeš
2022-08-10 6:31 ` Tu, Lijuan
2022-09-08 8:31 ` Bruce Richardson
2022-09-13 12:52 ` Juraj Linkeš
2022-09-13 23:31 ` Honnappa Nagarahalli
2022-09-14 12:51 ` Juraj Linkeš
2022-07-29 10:55 ` [PATCH v4 4/9] dts: add ssh pexpect library Juraj Linkeš
2022-08-10 6:31 ` Tu, Lijuan
2022-09-08 9:53 ` Bruce Richardson
2022-09-13 13:36 ` Juraj Linkeš
2022-09-13 14:23 ` Bruce Richardson
2022-09-13 14:59 ` Stanislaw Kardach
2022-09-13 17:23 ` Owen Hilyard
2022-09-14 0:03 ` Honnappa Nagarahalli
2022-09-14 7:42 ` Bruce Richardson
2022-09-14 7:58 ` Stanislaw Kardach
2022-09-14 19:57 ` Honnappa Nagarahalli
2022-09-19 14:21 ` Owen Hilyard
2022-09-20 17:54 ` Honnappa Nagarahalli
2022-09-21 1:01 ` Tu, Lijuan
2022-09-21 5:37 ` Jerin Jacob
2022-09-22 9:03 ` Juraj Linkeš
2022-09-14 9:42 ` Stanislaw Kardach [this message]
2022-09-22 9:41 ` Juraj Linkeš
2022-09-22 14:32 ` Stanislaw Kardach
2022-09-23 7:22 ` Juraj Linkeš
2022-09-23 8:15 ` Bruce Richardson
2022-09-23 10:18 ` Stanislaw Kardach
2022-07-29 10:55 ` [PATCH v4 5/9] dts: add ssh connection extension Juraj Linkeš
2022-08-10 6:32 ` Tu, Lijuan
2022-09-13 17:04 ` Bruce Richardson
2022-09-13 17:32 ` Owen Hilyard
2022-09-14 7:46 ` Bruce Richardson
2022-09-14 12:02 ` Owen Hilyard
2022-09-14 13:15 ` Bruce Richardson
2022-07-29 10:55 ` [PATCH v4 6/9] dts: add config parser module Juraj Linkeš
2022-08-10 6:33 ` Tu, Lijuan
2022-09-13 17:19 ` Bruce Richardson
2022-09-13 17:47 ` Owen Hilyard
2022-09-14 7:48 ` Bruce Richardson
2022-07-29 10:55 ` [PATCH v4 7/9] dts: add Node base class Juraj Linkeš
2022-08-10 6:33 ` Tu, Lijuan
2022-07-29 10:55 ` [PATCH v4 8/9] dts: add dts workflow module Juraj Linkeš
2022-08-10 6:34 ` Tu, Lijuan
2022-07-29 10:55 ` [PATCH v4 9/9] dts: add dts executable script Juraj Linkeš
2022-08-10 6:35 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220914094222.vprahs3kfhnsklyh@toster \
--to=kda@semihalf.com \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=juraj.linkes@pantheon.tech \
--cc=lijuan.tu@intel.com \
--cc=ohilyard@iol.unh.edu \
--cc=ronan.randles@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).