From: Shahaf Shuler <shahafs@mellanox.com>
To: jingjing.wu@intel.com, thomas@monjalon.net, ferruh.yigit@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 04/11] app/testpmd: convert to new Ethdev Tx offloads API
Date: Wed, 10 Jan 2018 11:09:12 +0200 [thread overview]
Message-ID: <58fe4a92faacd8398a87c781a30578ec730fd9b6.1515575134.git.shahafs@mellanox.com> (raw)
In-Reply-To: <cover.1515575134.git.shahafs@mellanox.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
Convert the application to use the new API.
This patch mandates the port to be stopped when configure the Tx
offloads. This is because the PMD must be aware to the offloads changes
on the device and queue configuration.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
app/test-pmd/cmdline.c | 90 ++++++++++++++++++++++++++++++++++++++++++---
app/test-pmd/config.c | 55 ++++++++++++++++++---------
app/test-pmd/testpmd.c | 3 ++
3 files changed, 124 insertions(+), 24 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index d8c73a9b1..58125839a 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -3439,7 +3439,14 @@ cmd_tx_vlan_set_parsed(void *parsed_result,
{
struct cmd_tx_vlan_set_result *res = parsed_result;
+ if (!port_is_stopped(res->port_id)) {
+ printf("Please stop port %d first\n", res->port_id);
+ return;
+ }
+
tx_vlan_set(res->port_id, res->vlan_id);
+
+ cmd_reconfig_device_queue(res->port_id, 1, 1);
}
cmdline_parse_token_string_t cmd_tx_vlan_set_tx_vlan =
@@ -3486,7 +3493,14 @@ cmd_tx_vlan_set_qinq_parsed(void *parsed_result,
{
struct cmd_tx_vlan_set_qinq_result *res = parsed_result;
+ if (!port_is_stopped(res->port_id)) {
+ printf("Please stop port %d first\n", res->port_id);
+ return;
+ }
+
tx_qinq_set(res->port_id, res->vlan_id, res->vlan_id_outer);
+
+ cmd_reconfig_device_queue(res->port_id, 1, 1);
}
cmdline_parse_token_string_t cmd_tx_vlan_set_qinq_tx_vlan =
@@ -3592,7 +3606,14 @@ cmd_tx_vlan_reset_parsed(void *parsed_result,
{
struct cmd_tx_vlan_reset_result *res = parsed_result;
+ if (!port_is_stopped(res->port_id)) {
+ printf("Please stop port %d first\n", res->port_id);
+ return;
+ }
+
tx_vlan_reset(res->port_id);
+
+ cmd_reconfig_device_queue(res->port_id, 1, 1);
}
cmdline_parse_token_string_t cmd_tx_vlan_reset_tx_vlan =
@@ -3685,11 +3706,16 @@ cmd_csum_parsed(void *parsed_result,
struct cmd_csum_result *res = parsed_result;
int hw = 0;
uint16_t mask = 0;
+ uint64_t csum_offloads = 0;
if (port_id_is_invalid(res->port_id, ENABLED_WARN)) {
printf("invalid port %d\n", res->port_id);
return;
}
+ if (!port_is_stopped(res->port_id)) {
+ printf("Please stop port %d first\n", res->port_id);
+ return;
+ }
if (!strcmp(res->mode, "set")) {
@@ -3698,22 +3724,34 @@ cmd_csum_parsed(void *parsed_result,
if (!strcmp(res->proto, "ip")) {
mask = TESTPMD_TX_OFFLOAD_IP_CKSUM;
+ csum_offloads |= DEV_TX_OFFLOAD_IPV4_CKSUM;
} else if (!strcmp(res->proto, "udp")) {
mask = TESTPMD_TX_OFFLOAD_UDP_CKSUM;
+ csum_offloads |= DEV_TX_OFFLOAD_UDP_CKSUM;
} else if (!strcmp(res->proto, "tcp")) {
mask = TESTPMD_TX_OFFLOAD_TCP_CKSUM;
+ csum_offloads |= DEV_TX_OFFLOAD_TCP_CKSUM;
} else if (!strcmp(res->proto, "sctp")) {
mask = TESTPMD_TX_OFFLOAD_SCTP_CKSUM;
+ csum_offloads |= DEV_TX_OFFLOAD_SCTP_CKSUM;
} else if (!strcmp(res->proto, "outer-ip")) {
mask = TESTPMD_TX_OFFLOAD_OUTER_IP_CKSUM;
+ csum_offloads |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
}
- if (hw)
+ if (hw) {
ports[res->port_id].tx_ol_flags |= mask;
- else
+ ports[res->port_id].dev_conf.txmode.offloads |=
+ csum_offloads;
+ } else {
ports[res->port_id].tx_ol_flags &= (~mask);
+ ports[res->port_id].dev_conf.txmode.offloads &=
+ (~csum_offloads);
+ }
}
csum_show(res->port_id);
+
+ cmd_reconfig_device_queue(res->port_id, 1, 1);
}
cmdline_parse_token_string_t cmd_csum_csum =
@@ -3837,15 +3875,24 @@ cmd_tso_set_parsed(void *parsed_result,
if (port_id_is_invalid(res->port_id, ENABLED_WARN))
return;
+ if (!port_is_stopped(res->port_id)) {
+ printf("Please stop port %d first\n", res->port_id);
+ return;
+ }
if (!strcmp(res->mode, "set"))
ports[res->port_id].tso_segsz = res->tso_segsz;
- if (ports[res->port_id].tso_segsz == 0)
+ if (ports[res->port_id].tso_segsz == 0) {
+ ports[res->port_id].dev_conf.txmode.offloads &=
+ ~DEV_TX_OFFLOAD_TCP_TSO;
printf("TSO for non-tunneled packets is disabled\n");
- else
+ } else {
+ ports[res->port_id].dev_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_TCP_TSO;
printf("TSO segment size for non-tunneled packets is %d\n",
ports[res->port_id].tso_segsz);
+ }
/* display warnings if configuration is not supported by the NIC */
rte_eth_dev_info_get(res->port_id, &dev_info);
@@ -3854,6 +3901,8 @@ cmd_tso_set_parsed(void *parsed_result,
printf("Warning: TSO enabled but not "
"supported by port %d\n", res->port_id);
}
+
+ cmd_reconfig_device_queue(res->port_id, 1, 1);
}
cmdline_parse_token_string_t cmd_tso_set_tso =
@@ -3939,13 +3988,27 @@ cmd_tunnel_tso_set_parsed(void *parsed_result,
if (port_id_is_invalid(res->port_id, ENABLED_WARN))
return;
+ if (!port_is_stopped(res->port_id)) {
+ printf("Please stop port %d first\n", res->port_id);
+ return;
+ }
if (!strcmp(res->mode, "set"))
ports[res->port_id].tunnel_tso_segsz = res->tso_segsz;
- if (ports[res->port_id].tunnel_tso_segsz == 0)
+ if (ports[res->port_id].tunnel_tso_segsz == 0) {
+ ports[res->port_id].dev_conf.txmode.offloads &=
+ ~(DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO |
+ DEV_TX_OFFLOAD_IPIP_TNL_TSO |
+ DEV_TX_OFFLOAD_GENEVE_TNL_TSO);
printf("TSO for tunneled packets is disabled\n");
- else {
+ } else {
+ ports[res->port_id].dev_conf.txmode.offloads |=
+ (DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO |
+ DEV_TX_OFFLOAD_IPIP_TNL_TSO |
+ DEV_TX_OFFLOAD_GENEVE_TNL_TSO);
printf("TSO segment size for tunneled packets is %d\n",
ports[res->port_id].tunnel_tso_segsz);
@@ -3971,6 +4034,8 @@ cmd_tunnel_tso_set_parsed(void *parsed_result,
printf("Warning: csum set outer-ip must be set to hw "
"if outer L3 is IPv4; not necessary for IPv6\n");
}
+
+ cmd_reconfig_device_queue(res->port_id, 1, 1);
}
cmdline_parse_token_string_t cmd_tunnel_tso_set_tso =
@@ -13012,8 +13077,13 @@ cmd_set_macsec_offload_on_parsed(
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
+ if (!port_is_stopped(port_id)) {
+ printf("Please stop port %d first\n", port_id);
+ return;
+ }
ports[port_id].tx_ol_flags |= TESTPMD_TX_OFFLOAD_MACSEC;
+ ports[port_id].dev_conf.txmode.offloads |= DEV_TX_OFFLOAD_MACSEC_INSERT;
#ifdef RTE_LIBRTE_IXGBE_PMD
ret = rte_pmd_ixgbe_macsec_enable(port_id, en, rp);
#endif
@@ -13022,6 +13092,7 @@ cmd_set_macsec_offload_on_parsed(
switch (ret) {
case 0:
+ cmd_reconfig_device_queue(port_id, 1, 1);
break;
case -ENODEV:
printf("invalid port_id %d\n", port_id);
@@ -13096,14 +13167,21 @@ cmd_set_macsec_offload_off_parsed(
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
+ if (!port_is_stopped(port_id)) {
+ printf("Please stop port %d first\n", port_id);
+ return;
+ }
ports[port_id].tx_ol_flags &= ~TESTPMD_TX_OFFLOAD_MACSEC;
+ ports[port_id].dev_conf.txmode.offloads &=
+ ~DEV_TX_OFFLOAD_MACSEC_INSERT;
#ifdef RTE_LIBRTE_IXGBE_PMD
ret = rte_pmd_ixgbe_macsec_disable(port_id);
#endif
switch (ret) {
case 0:
+ cmd_reconfig_device_queue(port_id, 1, 1);
break;
case -ENODEV:
printf("invalid port_id %d\n", port_id);
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 3bc99be76..d0056fa69 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -616,8 +616,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VLAN_INSERT) {
printf("VLAN insert: ");
- if (ports[port_id].tx_ol_flags &
- TESTPMD_TX_OFFLOAD_INSERT_VLAN)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_VLAN_INSERT)
printf("on\n");
else
printf("off\n");
@@ -634,8 +634,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_QINQ_INSERT) {
printf("Double VLANs insert: ");
- if (ports[port_id].tx_ol_flags &
- TESTPMD_TX_OFFLOAD_INSERT_QINQ)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_QINQ_INSERT)
printf("on\n");
else
printf("off\n");
@@ -643,7 +643,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_IPV4_CKSUM) {
printf("TX IPv4 checksum: ");
- if (ports[port_id].tx_ol_flags & TESTPMD_TX_OFFLOAD_IP_CKSUM)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_IPV4_CKSUM)
printf("on\n");
else
printf("off\n");
@@ -651,7 +652,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_UDP_CKSUM) {
printf("TX UDP checksum: ");
- if (ports[port_id].tx_ol_flags & TESTPMD_TX_OFFLOAD_UDP_CKSUM)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_UDP_CKSUM)
printf("on\n");
else
printf("off\n");
@@ -659,7 +661,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_TCP_CKSUM) {
printf("TX TCP checksum: ");
- if (ports[port_id].tx_ol_flags & TESTPMD_TX_OFFLOAD_TCP_CKSUM)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_TCP_CKSUM)
printf("on\n");
else
printf("off\n");
@@ -667,7 +670,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_SCTP_CKSUM) {
printf("TX SCTP checksum: ");
- if (ports[port_id].tx_ol_flags & TESTPMD_TX_OFFLOAD_SCTP_CKSUM)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_SCTP_CKSUM)
printf("on\n");
else
printf("off\n");
@@ -675,8 +679,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) {
printf("TX Outer IPv4 checksum: ");
- if (ports[port_id].tx_ol_flags &
- TESTPMD_TX_OFFLOAD_OUTER_IP_CKSUM)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM)
printf("on\n");
else
printf("off\n");
@@ -684,7 +688,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_TCP_TSO) {
printf("TX TCP segmentation: ");
- if (ports[port_id].tso_segsz != 0)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_TCP_TSO)
printf("on\n");
else
printf("off\n");
@@ -692,7 +697,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_UDP_TSO) {
printf("TX UDP segmentation: ");
- if (ports[port_id].tso_segsz != 0)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_UDP_TSO)
printf("on\n");
else
printf("off\n");
@@ -700,7 +706,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VXLAN_TNL_TSO) {
printf("TSO for VXLAN tunnel packet: ");
- if (ports[port_id].tunnel_tso_segsz)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_VXLAN_TNL_TSO)
printf("on\n");
else
printf("off\n");
@@ -708,7 +715,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_GRE_TNL_TSO) {
printf("TSO for GRE tunnel packet: ");
- if (ports[port_id].tunnel_tso_segsz)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_GRE_TNL_TSO)
printf("on\n");
else
printf("off\n");
@@ -716,7 +724,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_IPIP_TNL_TSO) {
printf("TSO for IPIP tunnel packet: ");
- if (ports[port_id].tunnel_tso_segsz)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_IPIP_TNL_TSO)
printf("on\n");
else
printf("off\n");
@@ -724,7 +733,8 @@ port_offload_cap_display(portid_t port_id)
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_GENEVE_TNL_TSO) {
printf("TSO for GENEVE tunnel packet: ");
- if (ports[port_id].tunnel_tso_segsz)
+ if (ports[port_id].dev_conf.txmode.offloads &
+ DEV_TX_OFFLOAD_GENEVE_TNL_TSO)
printf("on\n");
else
printf("off\n");
@@ -1704,8 +1714,10 @@ rxtx_config_display(void)
tx_conf->tx_thresh.pthresh,
tx_conf->tx_thresh.hthresh,
tx_conf->tx_thresh.wthresh);
- printf(" TX RS bit threshold=%d - TXQ flags=0x%"PRIx32"\n",
- tx_conf->tx_rs_thresh, tx_conf->txq_flags);
+ printf(" TX RS bit threshold=%d - TXQ flags=0x%"PRIx32""
+ " - TXQ offloads=0x%"PRIx64"\n",
+ tx_conf->tx_rs_thresh, tx_conf->txq_flags,
+ tx_conf->offloads);
}
}
@@ -2783,6 +2795,7 @@ void
tx_vlan_set(portid_t port_id, uint16_t vlan_id)
{
int vlan_offload;
+
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (vlan_id_is_invalid(vlan_id))
@@ -2796,6 +2809,7 @@ tx_vlan_set(portid_t port_id, uint16_t vlan_id)
tx_vlan_reset(port_id);
ports[port_id].tx_ol_flags |= TESTPMD_TX_OFFLOAD_INSERT_VLAN;
+ ports[port_id].dev_conf.txmode.offloads |= DEV_TX_OFFLOAD_VLAN_INSERT;
ports[port_id].tx_vlan_id = vlan_id;
}
@@ -2803,6 +2817,7 @@ void
tx_qinq_set(portid_t port_id, uint16_t vlan_id, uint16_t vlan_id_outer)
{
int vlan_offload;
+
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
if (vlan_id_is_invalid(vlan_id))
@@ -2818,6 +2833,7 @@ tx_qinq_set(portid_t port_id, uint16_t vlan_id, uint16_t vlan_id_outer)
tx_vlan_reset(port_id);
ports[port_id].tx_ol_flags |= TESTPMD_TX_OFFLOAD_INSERT_QINQ;
+ ports[port_id].dev_conf.txmode.offloads |= DEV_TX_OFFLOAD_QINQ_INSERT;
ports[port_id].tx_vlan_id = vlan_id;
ports[port_id].tx_vlan_id_outer = vlan_id_outer;
}
@@ -2829,6 +2845,9 @@ tx_vlan_reset(portid_t port_id)
return;
ports[port_id].tx_ol_flags &= ~(TESTPMD_TX_OFFLOAD_INSERT_VLAN |
TESTPMD_TX_OFFLOAD_INSERT_QINQ);
+ ports[port_id].dev_conf.txmode.offloads &=
+ ~(DEV_TX_OFFLOAD_VLAN_INSERT |
+ DEV_TX_OFFLOAD_QINQ_INSERT);
ports[port_id].tx_vlan_id = 0;
ports[port_id].tx_vlan_id_outer = 0;
}
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 77154ef3b..0087438bc 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1498,6 +1498,9 @@ start_port(portid_t pid)
}
if (port->need_reconfig_queues > 0) {
port->need_reconfig_queues = 0;
+ port->tx_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ /* Apply Tx offloads configuration */
+ port->tx_conf.offloads = port->dev_conf.txmode.offloads;
/* setup tx queues */
for (qi = 0; qi < nb_txq; qi++) {
if ((numa_support) &&
--
2.12.0
next prev parent reply other threads:[~2018-01-10 9:09 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-23 12:07 [dpdk-dev] [PATCH 0/5] convert testpmd to new ethdev " Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 1/5] app/testpmd: convert to new Ethdev " Shahaf Shuler
2017-12-04 22:31 ` Ferruh Yigit
2017-12-05 6:39 ` Shahaf Shuler
2017-12-06 22:57 ` Ferruh Yigit
2017-12-07 7:55 ` Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 2/5] app/testpmd: remove txqflags Shahaf Shuler
2017-12-04 22:31 ` Ferruh Yigit
2017-12-05 6:48 ` Shahaf Shuler
2017-12-06 23:04 ` Ferruh Yigit
2017-12-07 7:56 ` Shahaf Shuler
2017-12-12 12:45 ` Maciej Czekaj
2017-12-13 7:25 ` Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 3/5] app/testpmd: add command line option for multiseg Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 4/5] app/testpmd: add command line option for mbuf fast free Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 5/5] app/testpmd: enforce offloads caps Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 00/10] convert testpmd to new ethdev offloads API Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 01/10] app/testpmd: fix port configuration print Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 02/10] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 03/10] app/testpmd: support check of single port stop Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 04/10] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-05 18:11 ` Maciej Czekaj
2018-01-07 15:24 ` Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 05/10] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-09 5:32 ` Lu, Wenzhuo
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 06/10] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 07/10] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 08/10] app/testpmd: remove txqflags Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 09/10] app/testpmd: enforce offloads caps Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 10/10] app/testpmd: fix on the flight VLAN configuration Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 00/10] convert testpmd to new ethdev offloads API Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 01/10] app/testpmd: fix port configuration print Shahaf Shuler
2018-01-05 3:33 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 02/10] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2018-01-09 3:05 ` Lu, Wenzhuo
2018-01-19 19:30 ` Patil, Harish
2018-01-20 19:29 ` Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 03/10] app/testpmd: support check of single port stop Shahaf Shuler
2018-01-09 3:20 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 04/10] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-09 5:27 ` Lu, Wenzhuo
2018-01-09 6:47 ` Shahaf Shuler
2018-01-09 7:13 ` Lu, Wenzhuo
2018-01-09 10:02 ` Shahaf Shuler
2018-01-09 11:37 ` Lu, Wenzhuo
2018-01-09 12:14 ` Ananyev, Konstantin
2018-01-10 0:37 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 05/10] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-09 5:35 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 06/10] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2018-01-09 6:30 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 07/10] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 08/10] app/testpmd: remove txqflags Shahaf Shuler
2018-01-09 7:17 ` Lu, Wenzhuo
2018-01-09 10:07 ` Shahaf Shuler
2018-01-09 11:51 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 09/10] app/testpmd: enforce offloads caps Shahaf Shuler
2018-01-09 7:48 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 10/10] app/testpmd: fix on the flight VLAN configuration Shahaf Shuler
2018-01-09 8:05 ` Lu, Wenzhuo
2018-01-09 10:03 ` Shahaf Shuler
2018-01-09 11:44 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 00/11] convert testpmd to new ethdev offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 01/11] app/testpmd: fix port configuration print Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 02/11] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 03/11] app/testpmd: support check of single port stop Shahaf Shuler
2018-01-10 9:09 ` Shahaf Shuler [this message]
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 05/11] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 06/11] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 07/11] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2018-01-15 3:06 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 08/11] app/testpmd: remove txqflags Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 09/11] app/testpmd: enforce offloads caps Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 10/11] app/testpmd: adjust on the flight VLAN configuration Shahaf Shuler
2018-01-15 3:30 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 11/11] app/testpmd: enable fast free Tx offload by default Shahaf Shuler
2018-01-15 3:33 ` Lu, Wenzhuo
2018-01-15 10:00 ` [dpdk-dev] [PATCH v4 00/11] convert testpmd to new ethdev offloads API Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58fe4a92faacd8398a87c781a30578ec730fd9b6.1515575134.git.shahafs@mellanox.com \
--to=shahafs@mellanox.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jingjing.wu@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).