From: Maxime Coquelin <maxime.coquelin@redhat.com>
To: "Ding, Xuan" <xuan.ding@intel.com>, "Xia, Chenbo" <chenbo.xia@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "Hu, Jiayu" <jiayu.hu@intel.com>,
"Pai G, Sunil" <sunil.pai.g@intel.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
"Van Haaren, Harry" <harry.van.haaren@intel.com>,
"Liu, Yong" <yong.liu@intel.com>,
"Jiang, Cheng1" <cheng1.jiang@intel.com>
Subject: Re: [dpdk-dev] [PATCH v3] vhost: enable IOMMU for async vhost
Date: Tue, 29 Jun 2021 11:23:14 +0200 [thread overview]
Message-ID: <933fa415-f3c8-7e4a-b3d2-20b382f456aa@redhat.com> (raw)
In-Reply-To: <SJ0PR11MB5216C88ADE1867187C1337A8E7099@SJ0PR11MB5216.namprd11.prod.outlook.com>
Hi Xuan,
On 6/22/21 8:18 AM, Ding, Xuan wrote:
> Hi Maxime,
>
> Replies are inline.
>
>> -----Original Message-----
>> From: Maxime Coquelin <maxime.coquelin@redhat.com>
>> Sent: Saturday, June 19, 2021 12:18 AM
>> To: Ding, Xuan <xuan.ding@intel.com>; Xia, Chenbo <chenbo.xia@intel.com>
>> Cc: dev@dpdk.org; Hu, Jiayu <jiayu.hu@intel.com>; Pai G, Sunil
>> <sunil.pai.g@intel.com>; Richardson, Bruce <bruce.richardson@intel.com>; Van
>> Haaren, Harry <harry.van.haaren@intel.com>; Liu, Yong <yong.liu@intel.com>
>> Subject: Re: [PATCH v3] vhost: enable IOMMU for async vhost
>>
>> Hi Xuan,
>>
>> On 6/3/21 7:30 PM, xuan.ding@intel.com wrote:
>>> From: Xuan Ding <xuan.ding@intel.com>
>>>
>>> For async copy, it is unsafe to directly use the physical address.
>>> And current address translation from GPA to HPA via SW also takes
>>> CPU cycles, these can all benefit from IOMMU.
>>>
>>> Since the existing DMA engine supports to use platform IOMMU,
>>> this patch enables IOMMU for async vhost, which defines IOAT
>>> devices to use virtual address instead of physical address.
>>
>> We have to keep in mind a generic DMA api is coming, and maybe we want
>> a SW implementation of a dmadev based on memcpy at least for
>> testing/debugging purpose.
>
> I noticed the generic dmadev model is under discussion. To support a SW
> implementation, the VA mode support is needed, this is also the problem
> that this patch hopes to solve. Traditionally, DMA engine can only use
> physical address in PA mode.
>
>>
>>> When set memory table, the frontend's memory will be mapped
>>> to the default container of DPDK where IOAT devices have been
>>> added into. When DMA copy fails, the virtual address provided
>>> to IOAT devices also allow us fallback to SW copy or PA copy.
>>>
>>> With IOMMU enabled, to use IOAT devices:
>>> 1. IOAT devices must be binded to vfio-pci, rather than igb_uio.
>>> 2. DPDK must use "--iova-mode=va".
>>
>> I think this is problematic, at least we need to check the right iova
>> mode has been selected, but even with doing that it is limiting.
>
> As a library, vhost is not aware of the device selected address(PA or VA)
> and current DPDK iova mode. To some extent, this patch is a proposal.
If I'm not mistaken, the DMA device driver init should fail if it does
not support the DPDK IOVA mode.
Then, on Vhost lib side, you should be able to get the IOVA mode by
using the rte_eal_iova_mode() API.
> With device fed with VA, SW fallback can be supported.
> And VA can also be translated to PA through rte_mem_virt2iova().
> Finally, the address selected by the device is determined by callback.
> Not vice versa.
>
> If the DMA callback implementer follows this design, SW fallback can be supported.
> I would be very grateful if you could provide some insights for this design. :)
TBH, I find the async design too much complicated.
Having some descriptors handled by the DMA engine, others by the CPU
makes it extremly hard to debug. Also, it makes Vhost library use less
deterministic.
>>
>> What prevent us to reuse add_guest_pages() alogrithm to implement
>> IOVA_AS_PA?
>
> If IOVA is PA, it's not easy to translate PA to VA to support SW implementation.
What prevent you to use dev->guest_pages[] in that case to do the
translations?
> Until now, I don't have any good ideas to be compatible with IOVA_AS_PA
> and IOVA_AS_VA at the same time, because it requires vhost library to
> select PA/VA for DMA device according to different DPDK iova mode.
If the DMA device claims to support IOVA_AS_PA at probe time, it should
be useable by the vhost library. It might not be the more efficient
mode, but we cannot just have a comment in the documenation saying that
IOVA_AS_VA is the only supported mode, without any safety check in the
code itself.
Regards,
Maxime
> Thanks,
> Xuan
>
>>
>>>
>>> Signed-off-by: Xuan Ding <xuan.ding@intel.com>
>>> ---
>>>
>>> v3:
>>> * Fixed some typos.
>>>
>>> v2:
>>> * Fixed a format issue.
>>> * Added the dma unmap logic when device is closed.
>>> ---
>>> doc/guides/prog_guide/vhost_lib.rst | 20 +++++
>>> lib/vhost/vhost_user.c | 125 +++++++++-------------------
>>> lib/vhost/virtio_net.c | 30 +++----
>>> 3 files changed, 69 insertions(+), 106 deletions(-)
>>>
>>> diff --git a/doc/guides/prog_guide/vhost_lib.rst
>> b/doc/guides/prog_guide/vhost_lib.rst
>>> index d18fb98910..5777f0da96 100644
>>> --- a/doc/guides/prog_guide/vhost_lib.rst
>>> +++ b/doc/guides/prog_guide/vhost_lib.rst
>>> @@ -420,3 +420,23 @@ Finally, a set of device ops is defined for device
>> specific operations:
>>> * ``get_notify_area``
>>>
>>> Called to get the notify area info of the queue.
>>> +
>>> +Vhost async data path
>>> +---------------------
>>> +
>>> +* Address mode
>>> +
>>> + Modern IOAT devices support to use the IOMMU, which can avoid using
>>> + the unsafe HPA. Besides, the CPU cycles took by SW to translate from
>>> + GPA to HPA can also be saved. So IOAT devices are defined to use
>>> + virtual address instead of physical address.
>>> +
>>> + With IOMMU enabled, to use IOAT devices:
>>> + 1. IOAT devices must be binded to vfio-pci, rather than igb_uio.
>>> + 2. DPDK must use ``--iova-mode=va``.
>>> +
>>> +* Fallback
>>> +
>>> + When the DMA copy fails, the user who implements the transfer_data
>>> + callback can fallback to SW copy or fallback to PA copy through
>>> + rte_mem_virt2iova().
>>> diff --git a/lib/vhost/vhost_user.c b/lib/vhost/vhost_user.c
>>> index 8f0eba6412..c33fa784ff 100644
>>> --- a/lib/vhost/vhost_user.c
>>> +++ b/lib/vhost/vhost_user.c
>>> @@ -45,6 +45,7 @@
>>> #include <rte_common.h>
>>> #include <rte_malloc.h>
>>> #include <rte_log.h>
>>> +#include <rte_vfio.h>
>>>
>>> #include "iotlb.h"
>>> #include "vhost.h"
>>> @@ -141,6 +142,34 @@ get_blk_size(int fd)
>>> return ret == -1 ? (uint64_t)-1 : (uint64_t)stat.st_blksize;
>>> }
>>>
>>> +static int
>>> +async_dma_map(struct rte_vhost_mem_region *region, bool do_map)
>>> +{
>>> + int ret = 0;
>>> + if (do_map) {
>>> + /* Add mapped region into the default container of DPDK. */
>>> + ret =
>> rte_vfio_container_dma_map(RTE_VFIO_DEFAULT_CONTAINER_FD,
>>> + region->host_user_addr,
>>> + region->host_user_addr,
>>> + region->size);
>>> + if (ret) {
>>> + VHOST_LOG_CONFIG(ERR, "DMA engine map failed\n");
>>> + return ret;
>>> + }
>>> + } else {
>>> + /* Remove mapped region from the default container of DPDK.
>> */
>>> + ret =
>> rte_vfio_container_dma_unmap(RTE_VFIO_DEFAULT_CONTAINER_FD,
>>> + region->host_user_addr,
>>> + region->host_user_addr,
>>> + region->size);
>>> + if (ret) {
>>> + VHOST_LOG_CONFIG(ERR, "DMA engine unmap
>> failed\n");
>>> + return ret;
>>> + }
>>> + }
>>> + return ret;
>>> +}
>>> +
>>> static void
>>> free_mem_region(struct virtio_net *dev)
>>> {
>>> @@ -155,6 +184,9 @@ free_mem_region(struct virtio_net *dev)
>>> if (reg->host_user_addr) {
>>> munmap(reg->mmap_addr, reg->mmap_size);
>>> close(reg->fd);
>>> +
>>> + if (dev->async_copy)
>>> + async_dma_map(reg, false);
>>> }
>>> }
>>> }
>>> @@ -866,87 +898,6 @@ vhost_user_set_vring_base(struct virtio_net **pdev,
>>> return RTE_VHOST_MSG_RESULT_OK;
>>> }
>>>
>>> -static int
>>> -add_one_guest_page(struct virtio_net *dev, uint64_t guest_phys_addr,
>>> - uint64_t host_phys_addr, uint64_t size)
>>> -{
>>> - struct guest_page *page, *last_page;
>>> - struct guest_page *old_pages;
>>> -
>>> - if (dev->nr_guest_pages == dev->max_guest_pages) {
>>> - dev->max_guest_pages *= 2;
>>> - old_pages = dev->guest_pages;
>>> - dev->guest_pages = rte_realloc(dev->guest_pages,
>>> - dev->max_guest_pages * sizeof(*page),
>>> - RTE_CACHE_LINE_SIZE);
>>> - if (dev->guest_pages == NULL) {
>>> - VHOST_LOG_CONFIG(ERR, "cannot realloc
>> guest_pages\n");
>>> - rte_free(old_pages);
>>> - return -1;
>>> - }
>>> - }
>>> -
>>> - if (dev->nr_guest_pages > 0) {
>>> - last_page = &dev->guest_pages[dev->nr_guest_pages - 1];
>>> - /* merge if the two pages are continuous */
>>> - if (host_phys_addr == last_page->host_phys_addr +
>>> - last_page->size) {
>>> - last_page->size += size;
>>> - return 0;
>>> - }
>>> - }
>>> -
>>> - page = &dev->guest_pages[dev->nr_guest_pages++];
>>> - page->guest_phys_addr = guest_phys_addr;
>>> - page->host_phys_addr = host_phys_addr;
>>> - page->size = size;
>>> -
>>> - return 0;
>>> -}
>>> -
>>> -static int
>>> -add_guest_pages(struct virtio_net *dev, struct rte_vhost_mem_region *reg,
>>> - uint64_t page_size)
>>> -{
>>> - uint64_t reg_size = reg->size;
>>> - uint64_t host_user_addr = reg->host_user_addr;
>>> - uint64_t guest_phys_addr = reg->guest_phys_addr;
>>> - uint64_t host_phys_addr;
>>> - uint64_t size;
>>> -
>>> - host_phys_addr = rte_mem_virt2iova((void *)(uintptr_t)host_user_addr);
>>> - size = page_size - (guest_phys_addr & (page_size - 1));
>>> - size = RTE_MIN(size, reg_size);
>>> -
>>> - if (add_one_guest_page(dev, guest_phys_addr, host_phys_addr, size) <
>> 0)
>>> - return -1;
>>> -
>>> - host_user_addr += size;
>>> - guest_phys_addr += size;
>>> - reg_size -= size;
>>> -
>>> - while (reg_size > 0) {
>>> - size = RTE_MIN(reg_size, page_size);
>>> - host_phys_addr = rte_mem_virt2iova((void *)(uintptr_t)
>>> - host_user_addr);
>>> - if (add_one_guest_page(dev, guest_phys_addr, host_phys_addr,
>>> - size) < 0)
>>> - return -1;
>>> -
>>> - host_user_addr += size;
>>> - guest_phys_addr += size;
>>> - reg_size -= size;
>>> - }
>>> -
>>> - /* sort guest page array if over binary search threshold */
>>> - if (dev->nr_guest_pages >= VHOST_BINARY_SEARCH_THRESH) {
>>> - qsort((void *)dev->guest_pages, dev->nr_guest_pages,
>>> - sizeof(struct guest_page), guest_page_addrcmp);
>>> - }
>>> -
>>> - return 0;
>>> -}
>>> -
>>> #ifdef RTE_LIBRTE_VHOST_DEBUG
>>> /* TODO: enable it only in debug mode? */
>>> static void
>>> @@ -1105,6 +1056,7 @@ vhost_user_mmap_region(struct virtio_net *dev,
>>> uint64_t mmap_size;
>>> uint64_t alignment;
>>> int populate;
>>> + int ret;
>>>
>>> /* Check for memory_size + mmap_offset overflow */
>>> if (mmap_offset >= -region->size) {
>>> @@ -1158,12 +1110,13 @@ vhost_user_mmap_region(struct virtio_net *dev,
>>> region->mmap_size = mmap_size;
>>> region->host_user_addr = (uint64_t)(uintptr_t)mmap_addr +
>> mmap_offset;
>>>
>>> - if (dev->async_copy)
>>> - if (add_guest_pages(dev, region, alignment) < 0) {
>>> - VHOST_LOG_CONFIG(ERR,
>>> - "adding guest pages to region
>> failed.\n");
>>> + if (dev->async_copy) {
>>> + ret = async_dma_map(region, true);
>>> + if (ret) {
>>> + VHOST_LOG_CONFIG(ERR, "Configure IOMMU for DMA
>> engine failed\n");
>>> return -1;
>>
>> Maybe we're too late in the init already, but I would think we may want
>> to fallback to SW implementation insea
>>
>>> - }
>>> + }
>>> + }
>>>
>>> VHOST_LOG_CONFIG(INFO,
>>> "guest memory region size: 0x%" PRIx64 "\n"
>>> diff --git a/lib/vhost/virtio_net.c b/lib/vhost/virtio_net.c
>>> index 8da8a86a10..88110d2cb3 100644
>>> --- a/lib/vhost/virtio_net.c
>>> +++ b/lib/vhost/virtio_net.c
>>> @@ -980,11 +980,9 @@ async_mbuf_to_desc(struct virtio_net *dev, struct
>> vhost_virtqueue *vq,
>>> struct batch_copy_elem *batch_copy = vq->batch_copy_elems;
>>> struct virtio_net_hdr_mrg_rxbuf tmp_hdr, *hdr = NULL;
>>> int error = 0;
>>> - uint64_t mapped_len;
>>>
>>> uint32_t tlen = 0;
>>> int tvec_idx = 0;
>>> - void *hpa;
>>>
>>> if (unlikely(m == NULL)) {
>>> error = -1;
>>> @@ -1074,27 +1072,19 @@ async_mbuf_to_desc(struct virtio_net *dev,
>> struct vhost_virtqueue *vq,
>>>
>>> cpy_len = RTE_MIN(buf_avail, mbuf_avail);
>>>
>>> - while (unlikely(cpy_len && cpy_len >= cpy_threshold)) {
>>> - hpa = (void *)(uintptr_t)gpa_to_first_hpa(dev,
>>> - buf_iova + buf_offset,
>>> - cpy_len, &mapped_len);
>>> -
>>> - if (unlikely(!hpa || mapped_len < cpy_threshold))
>>> - break;
>>> -
>>> + if (unlikely(cpy_len >= cpy_threshold)) {
>>> async_fill_vec(src_iovec + tvec_idx,
>>> - (void *)(uintptr_t)rte_pktmbuf_iova_offset(m,
>>> - mbuf_offset), (size_t)mapped_len);
>>> + rte_pktmbuf_mtod_offset(m, void *,
>> mbuf_offset), (size_t)cpy_len);
>>>
>>> async_fill_vec(dst_iovec + tvec_idx,
>>> - hpa, (size_t)mapped_len);
>>> -
>>> - tlen += (uint32_t)mapped_len;
>>> - cpy_len -= (uint32_t)mapped_len;
>>> - mbuf_avail -= (uint32_t)mapped_len;
>>> - mbuf_offset += (uint32_t)mapped_len;
>>> - buf_avail -= (uint32_t)mapped_len;
>>> - buf_offset += (uint32_t)mapped_len;
>>> + (void *)((uintptr_t)(buf_addr + buf_offset)),
>> (size_t)cpy_len);
>>> +
>>> + tlen += cpy_len;
>>> + mbuf_avail -= cpy_len;
>>> + mbuf_offset += cpy_len;
>>> + buf_avail -= cpy_len;
>>> + buf_offset += cpy_len;
>>> + cpy_len = 0;
>>> tvec_idx++;
>>> }
>>>
>>>
>
next prev parent reply other threads:[~2021-06-29 9:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 15:06 [dpdk-dev] [PATCH v1] lib/vhost: " xuan.ding
2021-06-02 14:26 ` [dpdk-dev] [PATCH v2] " xuan.ding
2021-06-03 17:30 ` [dpdk-dev] [PATCH v3] vhost: " xuan.ding
2021-06-18 16:17 ` Maxime Coquelin
2021-06-21 3:57 ` Hu, Jiayu
2021-06-22 6:18 ` Ding, Xuan
2021-06-29 9:23 ` Maxime Coquelin [this message]
2021-07-01 5:12 ` Ding, Xuan
2021-07-05 8:19 ` [dpdk-dev] [PATCH v4 0/2] vhost: add IOMMU support in async data path Xuan Ding
2021-07-05 8:19 ` [dpdk-dev] [PATCH v4 1/2] vhost: enable IOMMU for async vhost Xuan Ding
2021-07-05 8:19 ` [dpdk-dev] [PATCH v4 2/2] example/vhost: add dma vfio parsing Xuan Ding
2021-07-05 8:40 ` [dpdk-dev] [PATCH v5 0/2] vhost: add IOMMU support in async data path Xuan Ding
2021-07-05 8:40 ` [dpdk-dev] [PATCH v5 1/2] vhost: enable IOMMU for async vhost Xuan Ding
2021-07-05 12:16 ` Burakov, Anatoly
2021-07-05 12:45 ` Maxime Coquelin
2021-07-06 8:31 ` Ding, Xuan
2021-07-06 9:16 ` Burakov, Anatoly
2021-07-06 9:32 ` Maxime Coquelin
2021-07-07 6:25 ` Ding, Xuan
2021-07-07 12:17 ` Burakov, Anatoly
2021-07-07 12:54 ` Ding, Xuan
2021-07-07 14:33 ` Burakov, Anatoly
2021-07-07 15:00 ` Bruce Richardson
2021-07-07 15:09 ` Ding, Xuan
2021-07-05 8:40 ` [dpdk-dev] [PATCH v5 2/2] example/vhost: add dma vfio parsing Xuan Ding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=933fa415-f3c8-7e4a-b3d2-20b382f456aa@redhat.com \
--to=maxime.coquelin@redhat.com \
--cc=bruce.richardson@intel.com \
--cc=chenbo.xia@intel.com \
--cc=cheng1.jiang@intel.com \
--cc=dev@dpdk.org \
--cc=harry.van.haaren@intel.com \
--cc=jiayu.hu@intel.com \
--cc=sunil.pai.g@intel.com \
--cc=xuan.ding@intel.com \
--cc=yong.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).