From: "Burakov, Anatoly" <anatoly.burakov@intel.com>
To: "Ding, Xuan" <xuan.ding@intel.com>,
Maxime Coquelin <maxime.coquelin@redhat.com>,
"Xia, Chenbo" <chenbo.xia@intel.com>,
Thomas Monjalon <thomas@monjalon.net>,
David Marchand <david.marchand@redhat.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "Hu, Jiayu" <jiayu.hu@intel.com>,
"Pai G, Sunil" <sunil.pai.g@intel.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
"Van Haaren, Harry" <harry.van.haaren@intel.com>,
"Liu, Yong" <yong.liu@intel.com>,
"Ma, WenwuX" <wenwux.ma@intel.com>
Subject: Re: [dpdk-dev] [PATCH v5 1/2] vhost: enable IOMMU for async vhost
Date: Wed, 7 Jul 2021 15:33:44 +0100 [thread overview]
Message-ID: <cad19104-50fc-2c07-4432-2a82a36d6bf8@intel.com> (raw)
In-Reply-To: <BN9PR11MB551341408628DA3F3C610CC9E71A9@BN9PR11MB5513.namprd11.prod.outlook.com>
On 07-Jul-21 1:54 PM, Ding, Xuan wrote:
> Hi Anatoly,
>
>> -----Original Message-----
>> From: Burakov, Anatoly <anatoly.burakov@intel.com>
>> Sent: Wednesday, July 7, 2021 8:18 PM
>> To: Ding, Xuan <xuan.ding@intel.com>; Maxime Coquelin
>> <maxime.coquelin@redhat.com>; Xia, Chenbo <chenbo.xia@intel.com>;
>> Thomas Monjalon <thomas@monjalon.net>; David Marchand
>> <david.marchand@redhat.com>
>> Cc: dev@dpdk.org; Hu, Jiayu <jiayu.hu@intel.com>; Pai G, Sunil
>> <sunil.pai.g@intel.com>; Richardson, Bruce <bruce.richardson@intel.com>; Van
>> Haaren, Harry <harry.van.haaren@intel.com>; Liu, Yong <yong.liu@intel.com>;
>> Ma, WenwuX <wenwux.ma@intel.com>
>> Subject: Re: [dpdk-dev] [PATCH v5 1/2] vhost: enable IOMMU for async vhost
>>
>> On 07-Jul-21 7:25 AM, Ding, Xuan wrote:
>>> Hi,
>>>
>>>> -----Original Message-----
>>>> From: Maxime Coquelin <maxime.coquelin@redhat.com>
>>>> Sent: Tuesday, July 6, 2021 5:32 PM
>>>> To: Burakov, Anatoly <anatoly.burakov@intel.com>; Ding, Xuan
>>>> <xuan.ding@intel.com>; Xia, Chenbo <chenbo.xia@intel.com>; Thomas
>>>> Monjalon <thomas@monjalon.net>; David Marchand
>>>> <david.marchand@redhat.com>
>>>> Cc: dev@dpdk.org; Hu, Jiayu <jiayu.hu@intel.com>; Pai G, Sunil
>>>> <sunil.pai.g@intel.com>; Richardson, Bruce <bruce.richardson@intel.com>;
>> Van
>>>> Haaren, Harry <harry.van.haaren@intel.com>; Liu, Yong
>> <yong.liu@intel.com>;
>>>> Ma, WenwuX <wenwux.ma@intel.com>
>>>> Subject: Re: [dpdk-dev] [PATCH v5 1/2] vhost: enable IOMMU for async vhost
>>>>
>>>>
>>>>
>>>> On 7/6/21 11:16 AM, Burakov, Anatoly wrote:
>>>>> On 06-Jul-21 9:31 AM, Ding, Xuan wrote:
>>>>>> Hi Maxime,
>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Maxime Coquelin <maxime.coquelin@redhat.com>
>>>>>>> Sent: Monday, July 5, 2021 8:46 PM
>>>>>>> To: Burakov, Anatoly <anatoly.burakov@intel.com>; Ding, Xuan
>>>>>>> <xuan.ding@intel.com>; Xia, Chenbo <chenbo.xia@intel.com>; Thomas
>>>>>>> Monjalon <thomas@monjalon.net>; David Marchand
>>>>>>> <david.marchand@redhat.com>
>>>>>>> Cc: dev@dpdk.org; Hu, Jiayu <jiayu.hu@intel.com>; Pai G, Sunil
>>>>>>> <sunil.pai.g@intel.com>; Richardson, Bruce
>> <bruce.richardson@intel.com>;
>>>>>>> Van Haaren, Harry <harry.van.haaren@intel.com>; Liu, Yong
>>>>>>> <yong.liu@intel.com>; Ma, WenwuX <wenwux.ma@intel.com>
>>>>>>> Subject: Re: [dpdk-dev] [PATCH v5 1/2] vhost: enable IOMMU for async
>>>>>>> vhost
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 7/5/21 2:16 PM, Burakov, Anatoly wrote:
>>>>>>>> On 05-Jul-21 9:40 AM, Xuan Ding wrote:
>>>>>>>>> The use of IOMMU has many advantages, such as isolation and address
>>>>>>>>> translation. This patch extends the capbility of DMA engine to use
>>>>>>>>> IOMMU if the DMA device is bound to vfio.
>>>>>>>>>
>>>>>>>>> When set memory table, the guest memory will be mapped
>>>>>>>>> into the default container of DPDK.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Xuan Ding <xuan.ding@intel.com>
>>>>>>>>> ---
>>>>>>>>> doc/guides/prog_guide/vhost_lib.rst | 9 ++++++
>>>>>>>>> lib/vhost/rte_vhost.h | 1 +
>>>>>>>>> lib/vhost/socket.c | 9 ++++++
>>>>>>>>> lib/vhost/vhost.h | 1 +
>>>>>>>>> lib/vhost/vhost_user.c | 46
>>>>>>>>> ++++++++++++++++++++++++++++-
>>>>>>>>> 5 files changed, 65 insertions(+), 1 deletion(-)
>>>>>>>>>
>>>>>>>>> diff --git a/doc/guides/prog_guide/vhost_lib.rst
>>>>>>>>> b/doc/guides/prog_guide/vhost_lib.rst
>>>>>>>>> index 05c42c9b11..c3beda23d9 100644
>>>>>>>>> --- a/doc/guides/prog_guide/vhost_lib.rst
>>>>>>>>> +++ b/doc/guides/prog_guide/vhost_lib.rst
>>>>>>>>> @@ -118,6 +118,15 @@ The following is an overview of some key
>> Vhost
>>>>>>>>> API functions:
>>>>>>>>> It is disabled by default.
>>>>>>>>> + - ``RTE_VHOST_USER_ASYNC_USE_VFIO``
>>>>>>>>> +
>>>>>>>>> + In asynchronous data path, vhost liarary is not aware of which
>>>>>>>>> driver
>>>>>>>>> + (igb_uio/vfio) the DMA device is bound to. Application should
>>>>>>>>> pass
>>>>>>>>> + this flag to tell vhost library whether IOMMU should be
>>>>>>>>> programmed
>>>>>>>>> + for guest memory.
>>>>>>>>> +
>>>>>>>>> + It is disabled by default.
>>>>>>>>> +
>>>>>>>>> - ``RTE_VHOST_USER_NET_COMPLIANT_OL_FLAGS``
>>>>>>>>> Since v16.04, the vhost library forwards checksum and gso
>>>>>>>>> requests for
>>>>>>>>> diff --git a/lib/vhost/rte_vhost.h b/lib/vhost/rte_vhost.h
>>>>>>>>> index 8d875e9322..a766ea7b6b 100644
>>>>>>>>> --- a/lib/vhost/rte_vhost.h
>>>>>>>>> +++ b/lib/vhost/rte_vhost.h
>>>>>>>>> @@ -37,6 +37,7 @@ extern "C" {
>>>>>>>>> #define RTE_VHOST_USER_LINEARBUF_SUPPORT (1ULL << 6)
>>>>>>>>> #define RTE_VHOST_USER_ASYNC_COPY (1ULL << 7)
>>>>>>>>> #define RTE_VHOST_USER_NET_COMPLIANT_OL_FLAGS (1ULL <<
>> 8)
>>>>>>>>> +#define RTE_VHOST_USER_ASYNC_USE_VFIO (1ULL << 9)
>>>>>>>>> /* Features. */
>>>>>>>>> #ifndef VIRTIO_NET_F_GUEST_ANNOUNCE
>>>>>>>>> diff --git a/lib/vhost/socket.c b/lib/vhost/socket.c
>>>>>>>>> index 5d0d728d52..77c722c86b 100644
>>>>>>>>> --- a/lib/vhost/socket.c
>>>>>>>>> +++ b/lib/vhost/socket.c
>>>>>>>>> @@ -42,6 +42,7 @@ struct vhost_user_socket {
>>>>>>>>> bool extbuf;
>>>>>>>>> bool linearbuf;
>>>>>>>>> bool async_copy;
>>>>>>>>> + bool async_use_vfio;
>>>>>>>>> bool net_compliant_ol_flags;
>>>>>>>>> /*
>>>>>>>>> @@ -243,6 +244,13 @@ vhost_user_add_connection(int fd, struct
>>>>>>>>> vhost_user_socket *vsocket)
>>>>>>>>> dev->async_copy = 1;
>>>>>>>>> }
>>>>>>>>> + if (vsocket->async_use_vfio) {
>>>>>>>>> + dev = get_device(vid);
>>>>>>>>> +
>>>>>>>>> + if (dev)
>>>>>>>>> + dev->async_use_vfio = 1;
>>>>>>>>> + }
>>>>>>>>> +
>>>>>>>>> VHOST_LOG_CONFIG(INFO, "new device, handle is %d\n", vid);
>>>>>>>>> if (vsocket->notify_ops->new_connection) {
>>>>>>>>> @@ -879,6 +887,7 @@ rte_vhost_driver_register(const char *path,
>>>>>>>>> uint64_t flags)
>>>>>>>>> vsocket->extbuf = flags & RTE_VHOST_USER_EXTBUF_SUPPORT;
>>>>>>>>> vsocket->linearbuf = flags &
>>>> RTE_VHOST_USER_LINEARBUF_SUPPORT;
>>>>>>>>> vsocket->async_copy = flags & RTE_VHOST_USER_ASYNC_COPY;
>>>>>>>>> + vsocket->async_use_vfio = flags &
>>>>>>> RTE_VHOST_USER_ASYNC_USE_VFIO;
>>>>>>>>> vsocket->net_compliant_ol_flags = flags &
>>>>>>>>> RTE_VHOST_USER_NET_COMPLIANT_OL_FLAGS;
>>>>>>>>> if (vsocket->async_copy &&
>>>>>>>>> diff --git a/lib/vhost/vhost.h b/lib/vhost/vhost.h
>>>>>>>>> index 8078ddff79..fb775ce4ed 100644
>>>>>>>>> --- a/lib/vhost/vhost.h
>>>>>>>>> +++ b/lib/vhost/vhost.h
>>>>>>>>> @@ -370,6 +370,7 @@ struct virtio_net {
>>>>>>>>> int16_t broadcast_rarp;
>>>>>>>>> uint32_t nr_vring;
>>>>>>>>> int async_copy;
>>>>>>>>> + int async_use_vfio;
>>>>>>>>> int extbuf;
>>>>>>>>> int linearbuf;
>>>>>>>>> struct vhost_virtqueue *virtqueue[VHOST_MAX_QUEUE_PAIRS *
>>>>>>>>> 2];
>>>>>>>>> diff --git a/lib/vhost/vhost_user.c b/lib/vhost/vhost_user.c
>>>>>>>>> index 8f0eba6412..f3703f2e72 100644
>>>>>>>>> --- a/lib/vhost/vhost_user.c
>>>>>>>>> +++ b/lib/vhost/vhost_user.c
>>>>>>>>> @@ -45,6 +45,7 @@
>>>>>>>>> #include <rte_common.h>
>>>>>>>>> #include <rte_malloc.h>
>>>>>>>>> #include <rte_log.h>
>>>>>>>>> +#include <rte_vfio.h>
>>>>>>>>> #include "iotlb.h"
>>>>>>>>> #include "vhost.h"
>>>>>>>>> @@ -141,6 +142,36 @@ get_blk_size(int fd)
>>>>>>>>> return ret == -1 ? (uint64_t)-1 : (uint64_t)stat.st_blksize;
>>>>>>>>> }
>>>>>>>>> +static int
>>>>>>>>> +async_dma_map(struct rte_vhost_mem_region *region, bool do_map)
>>>>>>>>> +{
>>>>>>>>> + int ret = 0;
>>>>>>>>> + uint64_t host_iova;
>>>>>>>>> + host_iova = rte_mem_virt2iova((void
>>>>>>>>> *)(uintptr_t)region->host_user_addr);
>>>>>>>>> + if (do_map) {
>>>>>>>>> + /* Add mapped region into the default container of DPDK. */
>>>>>>>>> + ret =
>>>>>>> rte_vfio_container_dma_map(RTE_VFIO_DEFAULT_CONTAINER_FD,
>>>>>>>>> + region->host_user_addr,
>>>>>>>>> + host_iova,
>>>>>>>>> + region->size);
>>>>>>>>> + if (ret) {
>>>>>>>>> + VHOST_LOG_CONFIG(ERR, "DMA engine map failed\n");
>>>>>>>>> + return ret;
>>>>>>>>> + }
>>>>>>>>> + } else {
>>>>>>>>> + /* Remove mapped region from the default container of
>>>>>>>>> DPDK. */
>>>>>>>>> + ret =
>>>>>>>>> rte_vfio_container_dma_unmap(RTE_VFIO_DEFAULT_CONTAINER_FD,
>>>>>>>>> + region->host_user_addr,
>>>>>>>>> + host_iova,
>>>>>>>>> + region->size);
>>>>>>>>> + if (ret) {
>>>>>>>>> + VHOST_LOG_CONFIG(ERR, "DMA engine unmap failed\n");
>>>>>>>>> + return ret;
>>>>>>>>> + }
>>>>>>>>> + }
>>>>>>>>> + return ret;
>>>>>>>>> +}
>>>>>>>>
>>>>>>>> We've been discussing this off list with Xuan, and unfortunately
>>>>>>>> this is
>>>>>>>> a blocker for now.
>>>>>>>>
>>>>>>>> Currently, the x86 IOMMU does not support partial unmap - the
>> segments
>>>>>>>> have to be unmapped exactly the same addr/len as they were mapped.
>> We
>>>>>>>> also concatenate adjacent mappings to prevent filling up the DMA
>>>>>>>> mapping
>>>>>>>> entry table with superfluous entries.
>>>>>>>>
>>>>>>>> This means that, when two unrelated mappings are contiguous in
>> memory
>>>>>>>> (e.g. if you map regions 1 and 2 independently, but they happen to be
>>>>>>>> sitting right next to each other in virtual memory), we cannot later
>>>>>>>> unmap one of them because, even though these are two separate
>>>>>>> mappings
>>>>>>>> as far as kernel VFIO infrastructure is concerned, the mapping gets
>>>>>>>> compacted and looks like one single mapping to VFIO, so DPDK API will
>>>>>>>> not let us unmap region 1 without also unmapping region 2.
>>>>>>>>
>>>>>>>> The proper fix for this problem would be to always map memory
>>>>>>>> page-by-page regardless of where it comes from (we already do that for
>>>>>>>> internal memory, but not for external). However, the reason this works
>>>>>>>> for internal memory is because when mapping internal memory
>> segments,
>>>>>>>> *we know the page size*. For external memory segments, there is no
>> such
>>>>>>>> guarantee, so we cannot deduce page size for a given memory segment,
>>>>>>> and
>>>>>>>> thus can't map things page-by-page.
>>>>>>>>
>>>>>>>> So, the proper fix for it would be to add page size to the VFIO DMA
>>>>>>>> API.
>>>>>>>> Unfortunately, it probably has to wait until 21.11 because it is an API
>>>>>>>> change.
>>>>>>>>
>>>>>>>> The slightly hacky fix for this would be to forego user mem map
>>>>>>>> concatenation and trust that user is not going to do anything stupid,
>>>>>>>> and will not spam the VFIO DMA API without reason. I would rather
>>>>>>>> not go
>>>>>>>> down this road, but this could be an option in this case.
>>>>>>>>
>>>>>>>> Thoughts?
>>>>>>>>
>>>>>>>
>>>>>>> Thanks Anatoly for the detailed description of the issue.
>>>>>>> It may be possible to either create a versioned symbol for this API
>>>>>>> change, or maybe even to have a temporary internal API.
>>>>>>>
>>>>>>> But I think this series in its current form is not acceptable, so
>>>>>>> waiting for v21.11 would be the best option (we may want to send the
>>>>>>> deprecation notice in this release though).
>>>>>>>
>>>>>>> In this series, I don't like the user application has to pass a flag to
>>>>>>> state whether the DMA engine uses VFIO or not. AFAICT, this new revision
>>>>>>> does not implement what was discussed in the previous one, i.e.
>>>>>>> supporting both IOVA_AS_VA and IOVA_AS_PA.
>>>>>>
>>>>>> Thanks for your comments. Here I hope to explain some questions:
>>>>>> 1. Whether both IOVA_AS_VA and IOVA_AS_PA are supported now?
>>>>>> A: Both IOVA_AS_PA and IOVA_AS_VA are supported now. In this version,
>> the
>>>>>> virtual address is replaced with iova address of mapped region, and
>>>>>> the iova
>>>>>> address is selected to program the IOMMU instead of virtual address only.
>>>>
>>>> Good!
>>>>
>>>>>>
>>>>>> 2. Why a flag is chosen to be passed by application?
>>>>>> A: Yes, as we discussed before, the rte_eal_iova_mode() API can be
>>>>>> used to
>>>>>> get the IOVA mode, so as to determine whether IOMMU should be
>>>> programmed.
>>>>>> However, in the implementation process, I found a problem. That is how to
>>>>>> distinguish the VFIO PA and IGB_UIO PA. Because for VFIO cases, we
>> should
>>>>>> always program the IOMMU. While in IGB_UIO cases, it depends on
>> IOMMU
>>>>>> capability of platform.
>>>>>
>>>>> How does one program IOMMU with igb_uio? I was under impression that
>>>>> igb_uio (and uio_pci_generic for that matter) does not provide such
>>>>> facilities.
>>>>
>>>> +1
>>>
>>> Maybe some misunderstanding in this sentence here.
>>> In our design, if rte_eal_vfio_is_enabled("vfio") is true, iommu will be
>> programmed.
>>> True means vfio module is modprobed.
>>>
>>> But there is an exception here, that is, even if vfio module is modprobed,
>>> DPDK user still bind all the devices to igb_uio.
>>>
>>> This situation can be distinguished in DPDK eal initialization, because the
>> resource mapping
>>> is according to the driver loaded by each device(rte_pci_map_device).
>>>
>>> But in our scenario, this judgment is somewhat weak. Because we cannot get
>>> the device driver info in vhost library. I also think it is unreasonable for vhost to
>>> do this. Only trust that users will not use it like this. Thoughts for this scenario?
>>
>> I don't see how igb_uio would make any difference at all. If you are
>> using igb_uio, you *don't have DMA mapping at all* and will use raw
>> physical addresses. Assuming your code supports this, that's all you're
>> ever going to get. The point of VFIO is to have memory regions that are
>> mapped for DMA *because real physical addresses are assumed to be not
>> available*. When you're using igb_uio, you effectively do have DMA
>> access to the entire memory, and thus can bypass IOMMU altogether
>> (assuming you're using passthrough mode).
>
> My concern is exactly here.
> In igb_uio cases, although devices are not added to the default container in eal init,
> but the "IOMMU programming" actually happens when the rte_vfio_container_dma_map() is called.
> It is no harm but it is also unnecessary.
Yes, it is unnecessary, but it's also not actively harmful, which means
you can still do it without any regard as to whether you do or don't
have IOMMU :)
Think of a hybrid VFIO/igb_uio setup - some NICs will have VFIO, some
will have igb_uio. The igb_uio-bound NICs will not care if you have
mapped anything for DMA because they don't go through IOMMU, things will
"just work". The VFIO-bound NICs will get the memory mapped, because
they are the ones who actually need the DMA mapping.
So, what you get is, if you do VFIO DMA mapping unconditionally, 1) NICs
with igb_uio won't care about this, and 2) NICs with VFIO will benefit.
You're not "mapping" the NICs, you're mapping the memory you're
accessing with those NICs. You need it to be accessible to both, but
since you have no way of knowing whether 1) any of the current HW needs
VFIO, and 2) any of *future hotplugged* HW needs VFIO, the easiest way
to solve this problem is just to map things regardless, and live with
the "unnecessary" but harmless mapping in the worst case.
>
>>
>> Bottom line: do VFIO DMA mapping unconditionally. If VFIO is active -
>> great, the memory will be DMA mapped. If it's not active - no harm will
>> ever be done by mapping the memory for DMA anyway.
>
> Do VFIO DMA mapping unconditionally, do you mean the rte_eal_vfio_is_enabled() is unnecessary?
> What if the platform does not have IOMMU?
>
> Thanks very much.
>
If the platform has no IOMMU, the API call will just not do anything
useful, so no harm done.
> Regards,
> Xuan
>
>>
>> --
>> Thanks,
>> Anatoly
--
Thanks,
Anatoly
next prev parent reply other threads:[~2021-07-07 14:33 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 15:06 [dpdk-dev] [PATCH v1] lib/vhost: " xuan.ding
2021-06-02 14:26 ` [dpdk-dev] [PATCH v2] " xuan.ding
2021-06-03 17:30 ` [dpdk-dev] [PATCH v3] vhost: " xuan.ding
2021-06-18 16:17 ` Maxime Coquelin
2021-06-21 3:57 ` Hu, Jiayu
2021-06-22 6:18 ` Ding, Xuan
2021-06-29 9:23 ` Maxime Coquelin
2021-07-01 5:12 ` Ding, Xuan
2021-07-05 8:19 ` [dpdk-dev] [PATCH v4 0/2] vhost: add IOMMU support in async data path Xuan Ding
2021-07-05 8:19 ` [dpdk-dev] [PATCH v4 1/2] vhost: enable IOMMU for async vhost Xuan Ding
2021-07-05 8:19 ` [dpdk-dev] [PATCH v4 2/2] example/vhost: add dma vfio parsing Xuan Ding
2021-07-05 8:40 ` [dpdk-dev] [PATCH v5 0/2] vhost: add IOMMU support in async data path Xuan Ding
2021-07-05 8:40 ` [dpdk-dev] [PATCH v5 1/2] vhost: enable IOMMU for async vhost Xuan Ding
2021-07-05 12:16 ` Burakov, Anatoly
2021-07-05 12:45 ` Maxime Coquelin
2021-07-06 8:31 ` Ding, Xuan
2021-07-06 9:16 ` Burakov, Anatoly
2021-07-06 9:32 ` Maxime Coquelin
2021-07-07 6:25 ` Ding, Xuan
2021-07-07 12:17 ` Burakov, Anatoly
2021-07-07 12:54 ` Ding, Xuan
2021-07-07 14:33 ` Burakov, Anatoly [this message]
2021-07-07 15:00 ` Bruce Richardson
2021-07-07 15:09 ` Ding, Xuan
2021-07-05 8:40 ` [dpdk-dev] [PATCH v5 2/2] example/vhost: add dma vfio parsing Xuan Ding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cad19104-50fc-2c07-4432-2a82a36d6bf8@intel.com \
--to=anatoly.burakov@intel.com \
--cc=bruce.richardson@intel.com \
--cc=chenbo.xia@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=harry.van.haaren@intel.com \
--cc=jiayu.hu@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=sunil.pai.g@intel.com \
--cc=thomas@monjalon.net \
--cc=wenwux.ma@intel.com \
--cc=xuan.ding@intel.com \
--cc=yong.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).